Kullanılmış Demag Çekici Için Vinç satın al (6.515)

Koşul: iyi (kullanılmış), Üretim yılı: 2004, Demag Ergotech Extra 500-200 (2004) Rcjdpfx Aeyyzuvobnsb

Koşul: iyi (kullanılmış), Üretim yılı: 2004, Demag ergotech sys 50-200 (1992) Rcsdpfx Abeyyztfsnsb

Koşul: iyi (kullanılmış), Üretim yılı: 2006, Demag Systec 160/520-430 (2010) Rodpoyyzpyjfx Abnscb

Koşul: iyi (kullanılmış), Üretim yılı: 2003, Demag Ergotech Extra 800-430 (2003) Rjdpsyyzi Hofx Abnocb

Koşul: iyi (kullanılmış), Üretim yılı: 2007, Ref. No.: 18616 Manufacturer: DEMAG Model: IntElect 80/370-100 NC4 Year of manufacture: 2007 Clamping Unit Clamping force: 80 tons Opening stroke: 340 mm Tie bar spacing (H x V): 370 x 370 mm Minimum mold height: 150 mm Injection Unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight (PS): 45 g Injection pressure: 2000 bar Dimensions and Weights Dimensions (LxWxH): 4.3 x 1.3 x 2.3 m Machine weight: 4,750 kg Rcjdpfx Abszabkvsneb Additional Information: A technology that excels in energy efficiency: Less energy, higher precision The Demag IntElect series is among the pioneering machines that introduced fully electric drive technology to the plastics injection molding sector in the late 2000s. Unlike conventional hydraulic systems, where pumps and cooling circuits run continuously, the IntElect's servo drive is only activated when a movement is actually required. This fundamental difference enables energy savings of 50–70% compared to hydraulic machines, significantly reducing annual operating costs. Motor System — Siemens MOTICS 3 Main drive motor · Water-cooled servo motor The main drive unit precisely controls all clamping and injection movements. Plasticizing motor · Water-cooled servo motor This motor, based on the same Siemens MOTICS 3 platform, melts material homogeneously using precise control of rotational speed and torque. Its water-cooled design ensures stable operation during prolonged intensive production. 5-axis Full Servo Control The machine is equipped with five independent servo motors. Clamping, injection, screw retraction, ejector, and plasticizing are all fully servo-driven. As each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times, and minimal mechanical wear compared to hydraulic systems. NC4 Control System The button-based NC4 system manages all machine parameters—including injection profile, mold protection, and cycle analysis—from a single display.

Üretim yılı: 2009, Koşul: işlem için hazır (kullanılmış), Clamping force: 2000 kN, holding force: 2200 kN, max. opening stroke: 570 mm, min. mold installation height: 310 mm, max. mold installation height: 660 mm, max. distance between platen faces: 1230 mm, platen dimensions: 830 x 830 mm, clear tie bar spacing: 560 x 560 mm, max. mold weight: 3.3 t, max. weight on moving platen: 1.7 t, max. weight on fixed platen: 2.5 t, ejector stroke: 180 mm, ejector force: 69 kN, ejector retraction force: 31 kN, screw diameter: 45 mm, L/D ratio: 20, injection pressure at 400°C: 2402 bar, shot volume: 358 cm³, shot weight (PS): 330 g, max. dosing stroke: 225 mm, max. nozzle stroke: 400 mm, nozzle immersion depth (SVO): 20 mm, nozzle contact force: 80 kN, installed cylinder heating capacity: 13 kW, material hopper capacity: 70 l, hydraulic oil capacity: 500 l, screw drive: 32 kW, clamping unit drive: 32 kW, pump unit output: 15 kW, total installed power: 92 kW, continuous sound pressure level: 74 dB(A), length: 5700 mm, width: 1700 mm, height: 2200 mm, weight: 11 t, controller operating hours: 36,734 h, cylinder heating: 25,665 h, pump: 18,222 h, documentation available. On-site inspection possible. A Wittmann robot cell is available as an option. Rjdoy Tx Rbspfx Abnscb

Üretim yılı: 2009, Koşul: işlem için hazır (kullanılmış), Clamping force: 3000 kN, holding force: 3300 kN, max. opening stroke: 670 mm, min. mold installation height: 330 mm, max. mold installation height: 710 mm, max. distance between platen faces: 1380 mm, platen dimensions: 1040 x 950 mm, clear tie bar spacing: 720 x 650 mm, max. mold weight: 4.7 t, max. weight on moving platen: 2.4 t, max. weight on fixed platen: 3.6 t, ejector stroke: 200 mm, ejector force: 69 kN, ejector retraction force: 31 kN, screw diameter: 50 mm, L/D ratio: 20, injection pressure at 400°C: 2426 bar, shot volume: 530 cm³, part weight (PS): 480 g, max. metering stroke: 270 mm, max. nozzle travel: 470 mm, nozzle immersion depth (SVO): 20 mm, nozzle contact force: 110 kN, installed cylinder heating: 14.8 kW, material hopper capacity: 110 l, oil tank capacity: 700 l, electric screw drive: 38 kW, electric drive clamping unit: 37 kW, pump power: 22 kW, total installed power: 112 kW, continuous sound pressure level: 78 dB(A), length: 6500 mm, width: 2000 mm, height: 2300 mm, weight: 15.7 t, PLC operating hours: 28,890 h, cylinder heater: 35,656 h, pump: 27,922 h, documentation available. On-site inspection possible. Rcsdpfx Aey Tx Rnsbnob

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2002, sıkıştırma kuvveti: 4.200 kN, vida çapı: 70 mm, Hidrolik enjeksiyon kalıplama makinesi 2002 yılında üretilmiştir. Bu DEMAG 420/810 - 2300, 420 tonluk bir sıkıştırma kuvvetine ve 1530 mm'lik bir maksimum kalıp yüksekliğine sahiptir. Vida çapı 70 mm ve atış hacmi 1090 cm³'tür. Yüksek kaliteli enjeksiyon kalıplama yetenekleri elde etmek istiyorsanız, satılık DEMAG 420/810 - 2300 makinesini düşünün. Daha fazla bilgi için bizimle iletişime geçin. • Bağlantı çubuğu aralığı (G × Y): 810 × 710 mm • Manyetik sıkıştırma: Hayır • Min. merdane boyutu (G × Y): 380 • Min. kalıp yüksekliği: 820 mm • Maks. kalıp yüksekliği: 1530 mm • Merdaneler arası maks. mesafe: 1530 • Hareketli kalıp yarısının maks. ağırlığı: 2200 kg • Merkezleme halkası çapı/yüksekliği: 160 × 15 • Yolluk burcu yarıçapı: R19 • Ejektör kaplin diş çapı: M24 • Atış hacmi: 1090 cm³ • Sıcak koşucular: 8 • Cascades hava (sayı): 6 • Cascades hidrolik (sayı): 6 • Hidrolik çekirdek çekme: 2 • Kapasite yağ dolumları: 730 • Güç kaynağı: 217 A • Güç girişi: 127,5 kW Ek ekipman Rsdoy Nyfljpfx Abnjcb • Robot: Demag, üretim yılı 2002

Koşul: ikinci el, Üretim yılı: 2005, Demag ekstra 50-200 Rcedpfoyypm Tex Abnsb

Koşul: ikinci el, Üretim yılı: 2000, Overview This complete hot filling line for non-carbonated beverages/juices was assembled by the previous operator and operated smoothly until decommissioning. The line is designed for the preparation, heating, filling, cooling, and packaging of products such as juice and similar drinks. It includes systems for thermal pretreatment, filling, post-cooling, and final packaging. The installation is still assembled and can be inspected on site at any time. Technical data Capacity: approx. 3,500 – 6,000 bottles/hour (filling range) Formats: 0.7 l / 1.0 l / 0.5 l / 1.5 l Application: Hot filling of juice and non-carbonated beverages Configuration: - Heating/pasteurization system (based on a plate heat exchanger) - Rotary filling machine with 28 filling valves and 4 capping heads - Three-zone cooling tunnel - Manual de-palletizing crane system - Rotary bottle rinser - Carton erecting and sealing unit Utilities: compressed air, electrical supply Scope of supply - De-palletizing crane system | DEMAG | Manual layer de-palletizing with air cushion gripper system - Bottle rinser | FIMER | Rotary rinser with conveying system - Filling monoblock | MAG Schymanski | BETTA 28/4 | 2000 | 28 filling valves / 4 capping heads, hot filling - Cooling system | 3-zone cooling tunnel with spray system - Plate heat exchanger | GEA | Integrated cooling circuit - Supply tank | Speidel | Atmospheric tank Rcedpfsy Rmfbjx Abneb - Pasteurization system | API Schmidt-Bretten | Plate heat exchanger-based heating system - Carton erector | BORTOLINKEMO | F.O.C. 23/30 | 1993 | Automatic carton erecting unit - Carton sealing machine | BORTOLIN | Hot melt carton sealing - Gluing unit | Nordson | Series 3400 | Hot melt gluing system - Conveyor systems | Various transport conveyors

Koşul: mükemmel (kullanılmış), Üretim yılı: 2015, sıkıştırma kuvveti: 1.000 kN, Kapatma kuvveti: 100 t Maksimum açılma: 500 mm Kalıp yüksekliği: 250 mm Plaka boyutu: 590x600 mm Kolonlar arası mesafe V: 420 mm Kolonlar arası mesafe H: 420 mm Tip: Yatay Tahrik: Hidrolik Vida çapı: 30 mm Enjeksiyon ağırlığı: 103 g Enjeksiyon hacmi: 115 cm³ Enjeksiyon basıncı: 2755 Rcedpfx Ajx Tdp Nsbneb Ek donanımlar: 1. Hareketli baskı plakası üzerinde 2 hidrolik çekirdek çekme devresi (oransal valfli) 2. Sabit baskı plakası üzerinde 2 adet çekirdek çekme devresi için ek bağlantılar 3. Hareketli baskı plakası üzerinde pnömatik çekirdek çekme (2 devre) 4. Sıcaklık göstergeli, 4 bölgeli soğutma suyu akış kontrol cihazı 5. Sabit ve hareketli baskı plakalarında programlanabilir basınçlı hava üfleme valfleri 6. Entegre sıcak yolluk kontrolü, 8 bölge 7. Harici meme ısıtıcıları için arayüzler 8. Entegre sıcaklık kontrol cihazları için arayüz (en fazla 6 devre) 9. Takım sıcaklığı izleme için arayüz (2 devre) 10. Otomasyon ekipmanları için EUROMAP 67 arayüzü

Koşul: mükemmel (kullanılmış), Üretim yılı: 1995, Demag Ergotech 80-310 Kompakt 80 tonluk kapanış Üretim yılı 1995 Kiriş aralığı 40x40 Scrow 40 şunu isterdi Redpewav Htefx Abnscb Spritz'e batırılmış 196 gr

Koşul: ikinci el, Üretim yılı: 1978, Çıkıntı 5.500 mm Taşıma kapasitesi 250 kg Rsdpfx Asyqvliebnecb Yükseklik 3.800 mm Kaldırma yüksekliği 3.800 mm Vinç numarası 1.30 Teknik veriler üretici veya işletmeci tarafından sağlanmıştır ve bizim için bağlayıcı değildir. Ön satış hakkını saklı tutarız; yalnızca genel iş ve satış koşullarımız geçerlidir. Hakkımızda stokta 400'den fazla kendi makinemiz den fazla 15.000 m² depo alanı, 70 t vinç kapasitesi atölyeniz için 10.000'den fazla aksesuar ürünü Makinalarınızı, üretim hatlarınızı veya işyerinizi satmak isterseniz bizimle iletişime geçin. Daha fazla teklifi web sitemizde bulabilirsiniz. Görüşmeler randevu ile mümkündür. Ziyaretinizi bekliyoruz. Markus Hirsch Ekibi

Koşul: ikinci el, Üretim yılı: 2004, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 7143-1001, sıkıştırma kuvveti: 500 kN, vida çapı: 30 mm, silindir hacmi: 106 cm³, enjeksiyon basıncı: 1.995 bar, enjeksiyon ağırlığı: 94 g, açılma hareketi: 400 mm, montaj yüksekliği: 210 mm, toplam uzunluk: 4.000 mm, toplam genişlik: 1.400 mm, toplam yükseklik: 2.100 mm, toplam ağırlık: 3.400 kg, pompa gücü: 15 W, Lütfen teklifin durumu ve içeriğini resimlerden ve videodan inceleyiniz. Tesis şu anda demonte durumdadır. Burada sunulan cihaz/sistem test edilmiş, tamamen çalışır durumda ve kullanıma hazırdır. Satış fiyatı KDV dahildir. Düzenli bir fatura alacaksınız. Yabancı müşteriler için geçerli bir vergi numarası ile net fatura da düzenlenebilir. Ara satış hakkı saklıdır. Rjdpjx Spw Asfx Abnjcb Web sitemizi ziyaret edin ve diğer tekliflerimize de göz atın. Belirtilen şirket isimleri ve ticari markalar, sahiplerinin mülkiyetindedir ve yalnızca ürünlerin tanımlanması ve açıklanmasına hizmet etmektedir. Teknik verilerdeki sapmalar ve ürün açıklamasındaki hatalar mümkündür ve bunlarda değişiklik yapma hakkı saklıdır.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2015, Kapama kuvveti: 100 t Rcjdsx Tdwyepfx Abnob Maks. açılma: 500 mm Kalıp yüksekliği: 250 mm Plaka boyutu: 590x600 mm Kolonlar arası mesafe V: 420 mm Kolonlar arası mesafe H: 420 mm Tip: Yatay Tahrik: Hidrolik Vida çapı: 30 mm Enjeksiyon ağırlığı: 103 g Enjeksiyon hacmi: 115 cm³ Enjeksiyon basıncı: 2755 Ek donanım: 1. Hareketli bağlama plakasında 2 hidrolik çekirdek çekme devresi (oransal valfli) 2. Sabit bağlama plakasında 2 çekirdek çekme için ek bağlantılar 3. Hareketli bağlama plakasında pnömatik çekirdek çekme (2 devre) 4. Sıcaklık göstergeli 4 bölgeli soğutma suyu debi regülatörü 5. Sabit ve hareketli bağlama plakasında programlanabilir basınçlı hava üfleme valfleri 6. Entegre sıcak yolluk kontrolü, 8 bölgeli 7. Harici meme ısıtma bantları için arayüz 8. Entegre ısıtıcı cihazlar için arayüz (6 devreye kadar) 9. Kalıp sıcaklığı izleme için arayüz (2 devre) 10. Otomasyon ekipmanları için EUROMAP 67

Koşul: iyi (kullanılmış), Üretim yılı: 2008, Ref. No.: 18622 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 Year of manufacture: 2008 Clamping Unit Clamping force: 100 tons Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Min. mold height: 200 mm Max. mold height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 35 mm Shot volume: 115 cm³ Shot weight (PS): 103 g Injection pressure: 1600 bar Dimensions and Weights Dimensions LxWxH: 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional Information & Extras Core pull: 1 pc. Additional Information: The Sumitomo (SHI) Demag IntElect series belongs to the class of high-precision, fully electric injection molding machines designed specifically for demanding technical plastic parts, automotive applications, electronic components, and high-volume production runs. All main machine movements are driven by direct-drive servo electric motors. Injection, metering, mold movements, and ejector functions are all performed fully electrically, ensuring the highest precision, outstanding repeatability, and maximum process stability. The IntElect series is particularly known for its low energy consumption and high production accuracy. Compared to conventional hydraulic injection molding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. At the same time, reduced heat generation lowers cooling requirements and decreases overall operating costs. The machine is equipped with a direct servo injection and dosing system, enabling extremely fast response times and highly precise injection control. The injection unit features 4 heating zones, ensuring homogeneous plasticizing and stable process conditions, especially when processing technical plastics. Key Benefits of the IntElect Series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance Rsdoy Ub D Topfx Abnscb * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for fast series production Thanks to its long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after fully electric injection molding machines on the market today.

Koşul: iyi (kullanılmış), Üretim yılı: 2008, Ref. No.: 18621 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of manufacture: 2008 Clamping Unit Clamping force: 100 tons Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Mold height min.: 200 mm Mold height max.: 430 mm Platen size (h x v): 690 x 620 mm Rsdpfxoy Ub D He Abnocb Injection Unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight (PS): 103 g Injection pressure: 1,600 bar Dimensions and Weight Dimensions LxWxH: 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional information: The Sumitomo (SHI) Demag IntElect series belongs to the high-precision, fully electric injection moulding machines, specially developed for technical plastic components, automotive applications, electronic parts, as well as demanding serial production. All primary machine movements are powered by direct-drive servo electric motors. Injection, dosing, mold movement, and ejector functions are executed entirely electrically, ensuring maximum precision, outstanding repeatability, and optimum process stability. The IntElect series is particularly renowned for its low energy consumption and exceptional production accuracy. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved depending on the application. The low heat generation also reduces cooling requirements and lowers overall operating costs. The machine features a direct-drive servo injection and dosing system, enabling very fast response times and highly precise injection control. The injection unit is equipped with 4 heating zones, ensuring homogeneous plasticizing and stable process conditions, especially for technical polymers. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Minimal maintenance effort * Clean production environment * Ideal solution for technical and precision parts * Suitable for high-speed serial production Due to its long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after fully electric injection moulding machines on the market.

Koşul: iyi (kullanılmış), Üretim yılı: 2008, Ref. No.: 18620 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 Year of manufacture: 2008 Clamping Unit Clamping force: 100 tons Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Minimum mold height: 200 mm Rsdpfx Aey Ub Dyebnscb Maximum mold height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 30 mm Shot volume: 85 cm³ Shot weight PS: 76 g Injection pressure: 2180 bar Dimensions and Weight Dimensions LxWxH: 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional information: The Sumitomo (SHI) Demag IntElect series belongs to the high-precision, fully electric injection molding machines that are specifically designed for technical plastic parts, automotive applications, electronic components, and demanding high-volume production. All main movements of the machine are powered by direct-drive servo electric motors. Injection, dosing, mold movements, and ejector functions are performed entirely electrically, enabling highest precision, excellent repeatability, and maximum process stability. The IntElect series is especially known for its low energy consumption and superior production accuracy. Compared to conventional hydraulic injection molding machines, energy savings of approximately 60% up to 80% can be achieved—depending on the application. At the same time, low heat generation reduces cooling requirements and lowers overall operating costs. This machine features a direct servo injection and dosing system, enabling very fast response times and highly precise injection control. The injection unit is equipped with 4 heating zones, providing homogeneous plasticizing and stable process conditions, particularly for technical plastics. Key benefits of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High-dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for fast serial production Thanks to its long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after fully electric injection molding machines on the market.

Koşul: iyi (kullanılmış), Üretim yılı: 2008, Ref. No.: 18619 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 Year of manufacture: 2008 Clamping Unit Clamping force: 100 tons Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Minimum mold height: 200 mm Maximum mold height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight (PS): 76 g Injection pressure: 2180 bar Dimensions and Weights Dimensions LxWxH: 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional information: The Sumitomo (SHI) Demag IntElect series is among the high-precision, fully electric injection molding machines, specifically designed for technical plastic parts, automotive applications, electronic components, as well as demanding serial production. All major movements of the machine are powered by direct drive servo-electric motors. Injection, dosing, mold movements, and ejector functions are all fully electric, enabling maximum precision, outstanding repeatability, and optimal process stability. The IntElect series is particularly renowned for its low energy consumption and high production accuracy. Compared to conventional hydraulic injection molding machines, energy savings of around 60% up to 80% can be achieved, depending on the application. At the same time, the low heat generation reduces cooling requirements and lowers overall operating costs. The machine features a direct servo drive injection and dosing system, offering extremely fast response times and highly precise injection control. The injection unit is equipped with four heating zones, ensuring homogeneous plasticizing and stable process conditions, especially for technical polymers. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low-noise and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for fast serial production Rcedpoy Ub Dtofx Abnjb Thanks to its long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after fully electric injection molding machines on the market today.

Koşul: iyi (kullanılmış), Üretim yılı: 2012, Ref. No.: 18610 Manufacturer: DEMAG Model: IntElect 160/520-340 NC5 Year of manufacture: 2012 Clamping Unit Clamping force: 160 tons Opening stroke: 495 mm Tie bar spacing (h x v): 520 x 520 mm Min. mold height: 275 mm Max. mold height: 585 mm Platen size (h x v): 760 x 785 mm Injection Unit Screw diameter: 35 mm Injection volume: 156 cm³ Injection weight PS: 139 g Injection pressure: 2180 bar Dimensions and Weights Dimensions LxWxH: 5.4 x 1.5 x 2.1 m Machine weight: 7,600 kg Additional Information: The Sumitomo (SHI) Demag IntElect series belongs to the category of high-precision, all-electric injection molding machines, specifically developed for technical plastic parts, automotive applications, electronic components, and demanding series production. All main movements of the machine are driven by direct drive servo electric motors. Injection, dosing, mold movement, and ejector functions are fully electric, enabling maximum precision, excellent repeatability, and optimal process stability. The IntElect series is particularly renowned for its low energy consumption and highly precise production. In comparison to conventional hydraulic injection molding machines, energy savings of approximately 60% up to 80% can be achieved, depending on the application. The reduced heat generation further decreases cooling requirements and lowers overall operating costs. The machine features a direct servo injection and dosing system, delivering very fast response times and highly precise injection control. The injection unit is equipped with 4 heating zones to ensure homogeneous plasticizing and stable process conditions, especially for engineering plastics. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low-noise and low-vibration operation * High dynamic servo performance * Minimal maintenance requirements * Clean production environment * Ideal for technical and precision parts Redpfxsy Ub Dmj Abnjcb * Suitable for fast series production Due to its long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains among the most sought-after all-electric injection molding machines on the market today.

Koşul: iyi (kullanılmış), Üretim yılı: 2014, Üretici: DEMAG Redpsyu R Dzefx Abnecb Yük kapasitesi: 860 kg + 630 kg (iki vinç ile donatılmıştır) Tam teknik ölçüler resimlerde gösterilmektedir. Kiriş ve ayaklarla birlikte vinç yolu, resimlerde görüldüğü gibi uzatılabilir, ancak uzatma için gerekli olan diğer ray elemanları mevcut değildir!

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2001, sıkıştırma kuvveti: 3.000 kN, toplam ağırlık: 13.900 kg, Bu 5 eksenli DEMAG ERGOTECH CONCEPT 3000-1450 2001 yılında üretilmiştir. Bu makine 3000 kN sıkıştırma kuvvetine ve 13,9 ton makine ağırlığına sahiptir. Maksimum 190 bar hidrolik basınç ve 164 l/dak akış hızı ile bu makine verimli çalışma için tasarlanmıştır. Yüksek kaliteli enjeksiyon kalıplama yetenekleri elde etmek istiyorsanız, satılık DEMAG ERGOTECH CONCEPT 3000-1450 hidrolik enjeksiyon kalıplama makinesini düşünün. Daha fazla bilgi için bizimle iletişime geçin. • Maks. Hidrolik Basınç: 190 bar Rcedpjy Icikefx Abnsb • Maks. Akış Hızı: 164 l/dak • Toplam Amperaj: 181 A • Isıtma Amperajı: 102 A • Sürücü Amperajı: 79 A • Kontrol Amperajı: 67 A • Çalışma Gerilimi: 400 V • Frekans: 50 Hz • Sertifikasyon: CE

Koşul: yenilenmiş (kullanılmış), Üretim yılı: 2008, Fonksiyonellik: tamamen fonksiyonel, Sumitomo DEMAG Systec 120/470-600 NC 5, 2008 üretim yılı, NC 5 kontrol ünitesi, 45 mm vida, 323 ccm / 294 g enjeksiyon hacmi, 1200KN kapama kuvveti, 470 mm x 470 mm kolon aralığı, minimum kalıp yüksekliği 150 mm, maksimum plaka aralığı 850 mm (WA ile 900 / 950), kalıp açma stroku 800 mm, ejektör stroku 180 mm. Makine şu anda revizyondan geçirilmekte ve fonksiyonelliği test edilmektedir. Rcedpfjy Tcu Djx Abnob

Koşul: mükemmel (kullanılmış), Demag zincirli vinç Tip: PK 5 Taşıma kapasitesi: 1000 kg Kaldırma yüksekliği: 4 metre Rcsdpfxoy I Ulke Abneb Kaldırma hızı: 7,5 metre/dakika Toplam uzunluk: 700 mm 380 Volt 1,4 kW Üretim yılı: 1967 Durumu çok iyi, sadece ara sıra kullanılmıştır. Yerinde test edilebilir. Taşıma ölçüleri: Uzunluk: 700 mm Genişlik: 400 mm Yükseklik: 320 mm Ağırlık: 60 kg

Koşul: ikinci el, Elektrikli zincirli vinç, elektrikli kaldırma tertibatı, DEMAG vinç tipi PK 2 N Fabrika No: 2033985 Üretim yılı: 1973 Kaldırma kapasitesi: 500 kg Rsdpfjy E T Dmjx Abnscb Kanca hareket mesafesi: 15 metre Kaldırma hızı: 5 m/dak. - 2 yük zinciri İyi durumda