Kullanılmış Demag 420/810 - 2300 (2002) satın al (5.676)

Koşul: yeni, DEMAG fren halkası / fren balatası / konik fren balatası - 50 adet (yeni). 1. Tip: KB 160 - 2 adet. 2. Tip: KB 100 - 2 adet. 3. Tip: KB 200 - 2 adet. 4. Tip: KB 140 - 2 adet. 5. Tip: KB 125 - 5 adet. 6. Tip: KB 112 - 1 adet. 7. Tip: KB 90 - 2 adet. Hjdpfjyy Takjx Afpsn 8. Tip: KB 80 - 11 adet. 9. Tip: No. 405 - 1 adet. 10. Tip: No. 616 654 - 5 adet. 11. Tip: No. 620 606 - 7 adet. 12. Tip: No. 612 648 44 - 6 adet. 13. Tip: No. 628 626 44 - 2 adet. DEMAG fren kapağı / fren gövdesi - 38 adet. Farklı boyutlar (yeni / ikinci el).

Koşul: ikinci el, 2-speed electric motor with gearbox DEMAG type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 piece three-phase push-ankermotor DEMAG Type: KBA 125 B Motor no.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 V, 50 Hz - Coupling disengages via armature thrust movement in direct drive 1 piece three-phase push-ankermotor DEMAG Type: KBA 80 A Motor no.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 V, 50 Hz - Brake disengages via armature thrust movement under drive - When stationary, the brake operates through the geared reduction unit on the motor - Output speed through gearbox: 174 rpm Reduction gearbox DEMAG type FG 08B-B3-23-H1-F1 Gearbox no.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Motor centering diameter: Ø 125 mm Motor bolt circle diameter: Ø 150 mm / 4xM12 internal threads Dimensions LxWxH: 1100 x 430 x 300 mm Hjdpfxjy N D E Ae Afpsn Weight: approx. 160 kg In good condition

Koşul: mükemmel (kullanılmış), DEMAG Zincirli Vinç Tip: PK 2 N-F Kaldırma hızları: 10 ve 2,5 m/dak. 380 Volt 0,5 kW Yürüyüş tahriki: 380 Volt 0,5 kW Hedpey Sldlefx Afpen

Koşul: ikinci el, kilometre: 221.291 km, Üretim yılı: 2009, çalışma saatleri: 15.356 h, Tahrik: Tekerlek Boş ağırlık: 22.000 kg Kaldırma kapasitesi: 30.000 kg Hedpfx Aewwqbyefpsn Yükleme alanı boyutları: 830 x 240 x 345 cm Seri numarası: 86584 Ön lastik durumu: 70 Arka lastik durumu: 70 Daha fazla bilgi için PFEIFER GROUP ile iletişime geçiniz.

Koşul: ikinci el, kilometre: 62.585 km, Üretim yılı: 2020, çalışma saatleri: 5.422 h, Kullanım amacı: inşaat Tahrik: tekerlekli Boş ağırlık: 48.000 kg Kaldırma kapasitesi: 220.000 kg Seri numarası: 82609 Ön lastik durumu: 90 Arka lastik durumu: 90 Hjdpewk T Uiofx Afpen Taşıma ölçüleri (U x G x Y): 15,3x3x4 Daha fazla bilgi için PFEIFER GROUP ile iletişime geçin.

Koşul: ikinci el, kilometre: 62.585 km, Üretim yılı: 2020, çalışma saatleri: 5.422 h, Tahrik: tekerlek Boş ağırlık: 48.000 kg Hodpfx Ajwk Aw Hofpsn Kaldırma kapasitesi: 220.000 kg Seri numarası: 82609 Ön lastik durumu: 90 Arka lastik durumu: 90 Taşıma ölçüleri (U x G x Y): 15,3 x 3 x 4 m Daha fazla bilgi için PFEIFER GROUP ile iletişime geçin.

Koşul: iyi (kullanılmış), Üretim yılı: 2004, Demag Ergotech Extra 500-200 (2004) Hodpfjyyzuvox Afpsn

Koşul: iyi (kullanılmış), Üretim yılı: 2004, Demag ergotech sys 50-200 (1992) Hjdpjyyztfjfx Afpsn

Koşul: iyi (kullanılmış), Üretim yılı: 2006, Demag Systec 160/520-430 (2010) Hedpfx Afeyyzpyepjn

Koşul: iyi (kullanılmış), Üretim yılı: 2003, Demag Ergotech Extra 800-430 (2003) Hodpfx Afsyyzi Hopsn

Koşul: ikinci el, Üretim yılı: 2003, Enjeksiyon kalıplama makinesi, Taşıma: Sepro Robotique | Success 7 | 2016 Sıcaklık kontrolü: HB Therm | Diğer: 1x Koruyucu Muhafaza 1x Konveyör Bant, RAU Maschinenbau firması 1x Sıcak Yolluk Kontrol Ünitesi 1x Konveyör Bant, SAS Grillet firması 1x Konveyör Ünitesi, Motan firması Teknik Detaylar: Makine boyutu: 500/370-200 Güç kaynağı: 3/N/PE AC 400 V Hjdpfxsy N R U Ro Afpon Frekans (Hz): 50 Akım (A): 94 Ağırlık (t): 3,3 Basınç (bar): 210 Debi (l/dak): 130

Koşul: ikinci el, Üretim yılı: 2000, Enjeksiyon kalıplama makinesi, Taşıma: Wittmann | WX142-0325 | 2023 Hsdjy N R Uqspfx Afpen Çeşitli: 1x koruyucu muhafaza 1x taşıma sistemi, Wittmann firma, Seri 9 1x konveyör bant, kutu değiştirme fonksiyonu dâhil 1x V2A hurda oluğu 1x Euromap 12/67 dönüşümü 1x harici sıcak yolluk ünitesi, Mold Masters M1-06-12 firması (imalat yılı 2016), 12 bölge 1x konveyör ünitesi, Motan firması Teknik Detaylar: Elektrik beslemesi: 3x400 V Frekans (Hz): 50 Akım 1 (A): 196 Akım 2 (A): 110 Akım 3 (A): 86 Akım 4 (A): 67 Ağırlık (ton): 9,7 Basınç (bar): 190 Debi (l/dk): 190

Koşul: ikinci el, Üretim yılı: 2014, Spritzgießmaschine, Handling: Sepro Robotique | Success 22 | Baujahr 2016 Temperierung: GWK Sonstiges: 1x Schutzeinhausung 1x Förderband Hsdpfxey N R R Ee Afpen 1x Fördergerät, Fa. Somos FG 204; Baujahr 2022 Technische Daten: Schließkraft (kN): 2100 Holmabstand (mm): 580 Spritzeinheit: 430 Stromversorgung: 3/400 V Frequenz (Hz): 50 Strom 1 (A): 175 Strom 2 (A): 116 Strom 3 (A): 59 Gewicht (t): 8,93 Druck (bar): 190

Koşul: ikinci el, Üretim yılı: 2003, (1) Spritzgießmaschine, Handhabung: Wittmann | W621 | 2003 Temperiergerät: HB Therm | HB-100 Z1 | 2013 Sonstiges: 1x Schutzeinhausung Hsdpfxey N R Iqs Afpen 1x Förderband 1x Heißkanalregler, Firma Mold Masters, 1x Fördergerät, Firma Motan Technische Details: Stromversorgung: 3x400 V Frequenz (Hz): 50 Strom 1 (A): 189 Strom 2 (A): 152 Strom 3 (A): 37 Gewicht (t): 10,1 Druck (bar): 190 Förderleistung (l/min): 206

Koşul: ikinci el, Üretim yılı: 2005, Demag ekstra 50-200 Hodpfeyypm Tsx Afpon

Koşul: iyi (kullanılmış), Üretim yılı: 2007, Ref. No.: 18616 Manufacturer: DEMAG Model: IntElect 80/370-100 NC4 Year of manufacture: 2007 Clamping Unit Clamping force: 80 tons Opening stroke: 340 mm Tie bar spacing (H x V): 370 x 370 mm Minimum mold height: 150 mm Injection Unit Screw diameter: 25 mm Injection volume: 51 cm³ Hsdpfxozabkvj Afpen Shot weight (PS): 45 g Injection pressure: 2000 bar Dimensions and Weights Dimensions (LxWxH): 4.3 x 1.3 x 2.3 m Machine weight: 4,750 kg Additional Information: A technology that excels in energy efficiency: Less energy, higher precision The Demag IntElect series is among the pioneering machines that introduced fully electric drive technology to the plastics injection molding sector in the late 2000s. Unlike conventional hydraulic systems, where pumps and cooling circuits run continuously, the IntElect's servo drive is only activated when a movement is actually required. This fundamental difference enables energy savings of 50–70% compared to hydraulic machines, significantly reducing annual operating costs. Motor System — Siemens MOTICS 3 Main drive motor · Water-cooled servo motor The main drive unit precisely controls all clamping and injection movements. Plasticizing motor · Water-cooled servo motor This motor, based on the same Siemens MOTICS 3 platform, melts material homogeneously using precise control of rotational speed and torque. Its water-cooled design ensures stable operation during prolonged intensive production. 5-axis Full Servo Control The machine is equipped with five independent servo motors. Clamping, injection, screw retraction, ejector, and plasticizing are all fully servo-driven. As each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times, and minimal mechanical wear compared to hydraulic systems. NC4 Control System The button-based NC4 system manages all machine parameters—including injection profile, mold protection, and cycle analysis—from a single display.

Üretim yılı: 2009, Koşul: işlem için hazır (kullanılmış), Clamping force: 2000 kN, holding force: 2200 kN, max. opening stroke: 570 mm, min. mold installation height: 310 mm, max. mold installation height: 660 mm, max. distance between platen faces: 1230 mm, platen dimensions: 830 x 830 mm, clear tie bar spacing: 560 x 560 mm, max. mold weight: 3.3 t, max. weight on moving platen: 1.7 t, max. weight on fixed platen: 2.5 t, ejector stroke: 180 mm, ejector force: 69 kN, ejector retraction force: 31 kN, screw diameter: 45 mm, L/D ratio: 20, injection pressure at 400°C: 2402 bar, shot volume: 358 cm³, shot weight (PS): 330 g, max. dosing stroke: 225 mm, max. nozzle stroke: 400 mm, nozzle immersion depth (SVO): 20 mm, nozzle contact force: 80 kN, installed cylinder heating capacity: 13 kW, material hopper capacity: 70 l, hydraulic oil capacity: 500 l, screw drive: 32 kW, clamping unit drive: 32 kW, pump unit output: 15 kW, total installed power: 92 kW, continuous sound pressure level: 74 dB(A), length: 5700 mm, width: 1700 mm, height: 2200 mm, weight: 11 t, controller operating hours: 36,734 h, cylinder heating: 25,665 h, pump: 18,222 h, documentation available. On-site inspection possible. A Wittmann robot cell is available as an option. Hsdpfxjy Tx Rbe Afpsn

Üretim yılı: 2009, Koşul: işlem için hazır (kullanılmış), Clamping force: 3000 kN, holding force: 3300 kN, max. opening stroke: 670 mm, min. mold installation height: 330 mm, max. mold installation height: 710 mm, max. distance between platen faces: 1380 mm, platen dimensions: 1040 x 950 mm, clear tie bar spacing: 720 x 650 mm, max. mold weight: 4.7 t, max. weight on moving platen: 2.4 t, max. weight on fixed platen: 3.6 t, ejector stroke: 200 mm, ejector force: 69 kN, ejector retraction force: 31 kN, screw diameter: 50 mm, L/D ratio: 20, injection pressure at 400°C: 2426 bar, shot volume: 530 cm³, part weight (PS): 480 g, max. metering stroke: 270 mm, max. nozzle travel: 470 mm, nozzle immersion depth (SVO): 20 mm, nozzle contact force: 110 kN, installed cylinder heating: 14.8 kW, material hopper capacity: 110 l, oil tank capacity: 700 l, electric screw drive: 38 kW, electric drive clamping unit: 37 kW, pump power: 22 kW, total installed power: 112 kW, continuous sound pressure level: 78 dB(A), length: 6500 mm, width: 2000 mm, height: 2300 mm, weight: 15.7 t, PLC operating hours: 28,890 h, cylinder heater: 35,656 h, pump: 27,922 h, documentation available. On-site inspection possible. Hedpfxjy Tx Rne Afpsn

Koşul: ikinci el, Üretim yılı: 2000, Overview This complete hot filling line for non-carbonated beverages/juices was assembled by the previous operator and operated smoothly until decommissioning. The line is designed for the preparation, heating, filling, cooling, and packaging of products such as juice and similar drinks. It includes systems for thermal pretreatment, filling, post-cooling, and final packaging. The installation is still assembled and can be inspected on site at any time. Technical data Capacity: approx. 3,500 – 6,000 bottles/hour (filling range) Formats: 0.7 l / 1.0 l / 0.5 l / 1.5 l Application: Hot filling of juice and non-carbonated beverages Configuration: - Heating/pasteurization system (based on a plate heat exchanger) - Rotary filling machine with 28 filling valves and 4 capping heads - Three-zone cooling tunnel - Manual de-palletizing crane system - Rotary bottle rinser - Carton erecting and sealing unit Utilities: compressed air, electrical supply Scope of supply - De-palletizing crane system | DEMAG | Manual layer de-palletizing with air cushion gripper system - Bottle rinser | FIMER | Rotary rinser with conveying system - Filling monoblock | MAG Schymanski | BETTA 28/4 | 2000 | 28 filling valves / 4 capping heads, hot filling - Cooling system | 3-zone cooling tunnel with spray system - Plate heat exchanger | GEA | Integrated cooling circuit - Supply tank | Speidel | Atmospheric tank - Pasteurization system | API Schmidt-Bretten | Plate heat exchanger-based heating system - Carton erector | BORTOLINKEMO | F.O.C. 23/30 | 1993 | Automatic carton erecting unit - Carton sealing machine | BORTOLIN | Hot melt carton sealing - Gluing unit | Nordson | Series 3400 | Hot melt gluing system - Conveyor systems | Various transport conveyors Hsdpfey Rmfbjx Afpsn

Koşul: mükemmel (kullanılmış), Üretim yılı: 1995, Demag Hsdpfxewav Htj Afpon Ergotech 80-310 Kompakt 80 tonluk kapanış Üretim yılı 1995 Kiriş aralığı 40x40 Scrow 40 şunu isterdi Spritz'e batırılmış 196 gr

Koşul: ikinci el, Üretim yılı: 1978, Çıkıntı 5.500 mm Taşıma kapasitesi 250 kg Yükseklik 3.800 mm Kaldırma yüksekliği 3.800 mm Vinç numarası 1.30 Teknik veriler üretici veya işletmeci tarafından sağlanmıştır ve bizim için bağlayıcı değildir. Ön satış hakkını saklı tutarız; yalnızca genel iş ve satış koşullarımız geçerlidir. Hakkımızda stokta 400'den fazla kendi makinemiz den fazla 15.000 m² depo alanı, 70 t vinç kapasitesi atölyeniz için 10.000'den fazla aksesuar ürünü Makinalarınızı, üretim hatlarınızı veya işyerinizi satmak isterseniz bizimle iletişime geçin. Hedpfsyqvliex Afpon Daha fazla teklifi web sitemizde bulabilirsiniz. Görüşmeler randevu ile mümkündür. Ziyaretinizi bekliyoruz. Markus Hirsch Ekibi

Koşul: ikinci el, Üretim yılı: 2004, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 7143-1001, sıkıştırma kuvveti: 500 kN, vida çapı: 30 mm, silindir hacmi: 106 cm³, enjeksiyon basıncı: 1.995 bar, enjeksiyon ağırlığı: 94 g, açılma hareketi: 400 mm, montaj yüksekliği: 210 mm, toplam uzunluk: 4.000 mm, toplam genişlik: 1.400 mm, toplam yükseklik: 2.100 mm, toplam ağırlık: 3.400 kg, pompa gücü: 15 W, Lütfen teklifin durumu ve içeriğini resimlerden ve videodan inceleyiniz. Tesis şu anda demonte durumdadır. Burada sunulan cihaz/sistem test edilmiş, tamamen çalışır durumda ve kullanıma hazırdır. Satış fiyatı KDV dahildir. Hsdpfsx Spw Ajx Afpsn Düzenli bir fatura alacaksınız. Yabancı müşteriler için geçerli bir vergi numarası ile net fatura da düzenlenebilir. Ara satış hakkı saklıdır. Web sitemizi ziyaret edin ve diğer tekliflerimize de göz atın. Belirtilen şirket isimleri ve ticari markalar, sahiplerinin mülkiyetindedir ve yalnızca ürünlerin tanımlanması ve açıklanmasına hizmet etmektedir. Teknik verilerdeki sapmalar ve ürün açıklamasındaki hatalar mümkündür ve bunlarda değişiklik yapma hakkı saklıdır.

Koşul: iyi (kullanılmış), Üretim yılı: 2014, Üretici: DEMAG Yük kapasitesi: 860 kg + 630 kg (iki vinç ile donatılmıştır) Tam teknik ölçüler resimlerde gösterilmektedir. Hedpfx Afjyu R Dzspen Kiriş ve ayaklarla birlikte vinç yolu, resimlerde görüldüğü gibi uzatılabilir, ancak uzatma için gerekli olan diğer ray elemanları mevcut değildir!

Koşul: iyi (kullanılmış), Üretim yılı: 2008, Ref. No.: 18622 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 Year of manufacture: 2008 Clamping Unit Clamping force: 100 tons Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Min. mold height: 200 mm Max. mold height: 430 mm Platen size (h x v): 690 x 620 mm Hjdpey Ub D Tsfx Afpjn Injection Unit Screw diameter: 35 mm Shot volume: 115 cm³ Shot weight (PS): 103 g Injection pressure: 1600 bar Dimensions and Weights Dimensions LxWxH: 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional Information & Extras Core pull: 1 pc. Additional Information: The Sumitomo (SHI) Demag IntElect series belongs to the class of high-precision, fully electric injection molding machines designed specifically for demanding technical plastic parts, automotive applications, electronic components, and high-volume production runs. All main machine movements are driven by direct-drive servo electric motors. Injection, metering, mold movements, and ejector functions are all performed fully electrically, ensuring the highest precision, outstanding repeatability, and maximum process stability. The IntElect series is particularly known for its low energy consumption and high production accuracy. Compared to conventional hydraulic injection molding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. At the same time, reduced heat generation lowers cooling requirements and decreases overall operating costs. The machine is equipped with a direct servo injection and dosing system, enabling extremely fast response times and highly precise injection control. The injection unit features 4 heating zones, ensuring homogeneous plasticizing and stable process conditions, especially when processing technical plastics. Key Benefits of the IntElect Series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for fast series production Thanks to its long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after fully electric injection molding machines on the market today.

Koşul: iyi (kullanılmış), Üretim yılı: 2008, Ref. No.: 18621 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of manufacture: 2008 Hsdpfoy Ub D Hsx Afpon Clamping Unit Clamping force: 100 tons Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Mold height min.: 200 mm Mold height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight (PS): 103 g Injection pressure: 1,600 bar Dimensions and Weight Dimensions LxWxH: 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional information: The Sumitomo (SHI) Demag IntElect series belongs to the high-precision, fully electric injection moulding machines, specially developed for technical plastic components, automotive applications, electronic parts, as well as demanding serial production. All primary machine movements are powered by direct-drive servo electric motors. Injection, dosing, mold movement, and ejector functions are executed entirely electrically, ensuring maximum precision, outstanding repeatability, and optimum process stability. The IntElect series is particularly renowned for its low energy consumption and exceptional production accuracy. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved depending on the application. The low heat generation also reduces cooling requirements and lowers overall operating costs. The machine features a direct-drive servo injection and dosing system, enabling very fast response times and highly precise injection control. The injection unit is equipped with 4 heating zones, ensuring homogeneous plasticizing and stable process conditions, especially for technical polymers. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Minimal maintenance effort * Clean production environment * Ideal solution for technical and precision parts * Suitable for high-speed serial production Due to its long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after fully electric injection moulding machines on the market.