Kullanılmış Imeas Zımpara satın al (3.329)

Koşul: mükemmel (kullanılmış), CATALOG NUMBER 5799 TECHNICAL DATA Dodpfjx Rqr Sex Almjut - Maximum workpiece width: 230 mm - Maximum workpiece height: 140 mm - Minimum workpiece length: 300 mm - 2 sanding units: - Top and bottom + shoes * From above: - 2 pressure rollers, sliding, metal - Pressure - Sanding unit: 2 metal rollers + shoe - Sliding pressure roller - Feed belt * From below: - Feed belt - 2 metal rollers, sliding, smooth - Pressure - Sanding unit: 2 metal rollers + shoe - 3 metal rollers, sliding, smooth - Electrically adjustable sanding height - Sanding belt oscillation - Pneumatic belt cleaning - Stepless feed speed adjustment via inverter, 3–15 m/min - Feed motors: 2×0.37 kW - Main motors: - Upper – 5.5 kW - Lower – approx. 5.5 kW - Air demand: 6–8 bar - Extraction outlet diameter: 4 x 100 mm - Overall dimensions (L/W/H): 2340 x 1420 x 1920 mm - Weight: 1480 kg – Suitable for short workpieces (belts overlap) – German manufacture – Very good condition – Not repainted – Used sander Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Koşul: mükemmel (kullanılmış), KATALOG NUMARASI 7928 TEKNİK BİLGİLER - Maksimum iş parçası yüksekliği: 120 mm - Maksimum iş parçası genişliği: 1900 mm - Üstten 6 fırçalı ünite - Yukarı/aşağı ayarlanabilen ünite - Salınımlı (osilatörlü) ünite - Yıldız şeklinde dönen zımpara ünite düzeni - İnvertör üzerinden fırça devir hızının kademesiz ayarı - İlerleme, rotasyon ve osilasyon hızlarının kademesiz ayarı Dujdpeyu Tmlsfx Almot - Ana motor gücü: 7,5 kW - Vakum tabla - 2 adet vakum pompası, her biri 7,5 kW (2×7,5kW) - Pompa ölçüleri: 1100x800x940 mm - Toz emiş ağzı çapları: 4x150 mm, 4x200 mm - Makinenin toplam boyutları (U/G/Y): 2850x2100x2400 mm - Ağırlık: yaklaşık 2500 kg AVANTAJLAR – 2 vakum pompası – Osilasyon özelliği – Döner ünite – Alman üretimi – Boyasız – Orijinal DTR dokümantasyonu – Kullanılmış, çok iyi durumda zımpara makinesi Net fiyat: 45.900 PLN Net fiyat: 10.900 EUR Net fiyat 4,2 PLN/EUR kuruna göre hesaplanmıştır (Döviz kuru büyük dalgalanmalar gösterirse fiyat değişebilir)

Koşul: mükemmel (kullanılmış), CATALOG NUMBER 6145 Dusdsyz Rtqepfx Almet TECHNICAL DATA - Maximum working width: 1100mm - Maximum working height: 140mm 3 units: 1) Grooved rubber calibration roller 15kW 2) Grooved rubber calibration roller 11kW 3) Grooved rubber calibration roller 11kW From above: - Metal idle roller - Rubber idle roller - Unit - 2 rubber idle rollers - Unit - 2 rubber idle rollers - Unit - Rubber idle roller From below: - Infeed table 3600x1000mm - Feed speed controlled by inverter 0.25kW - Conveyor belt - 3 rubber outfeed idle rollers - Pneumatic belt oscillation with photocells - Belt air cleaning system - Electric table height adjustment (lifting motor 0.75kW) - Step-less feed speed adjustment (feed motor 2.2kW) - With vacuum pump (pump motor 4kW) - Suction spigot diameter: 110mm, 80mm - Working pressure: 6-8bar - Suction spigot diameter: 3×150mm, 3×200mm Overall machine dimensions (L/W/H): 3400x2300x2800mm Feed table dimensions (L/W/H): 3000x1300x900mm Pump dimensions (L/W/H): 600x950x940mm Weight approximately 5000kg Net price: 39,900 PLN Net price: 9,500 EUR (based on exchange rate 4.2 PLN/EUR) (Prices are subject to change with significant fluctuations)

Koşul: mükemmel (kullanılmış), CATALOG NUMBER 7967 TECHNICAL DATA - Maximum workpiece width: 1100 mm - Maximum workpiece height: 170 mm 2 units: 1) Serrated metal roller for calibration 2) Serrated rubber roller + pressure shoe + metal roller – Top side: - Rubber infeed roller - Unit (two units driven by one 15 kW motor) - Rubber transport roller - Rubber outfeed roller - Belt air blower – Bottom side: - 2 metal sliding rollers - Feed belt - 2 rubber sliding rollers - Pneumatic belt oscillation Dujdpoy Ddp Djfx Almet - Sanding thickness potentiometer - Electric table height adjustment + manual fine adjustment - Pneumatic brake - 2 feed speeds - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (LxWxH): 1830x1670x1950 mm - Weight: 1160 kg ADVANTAGES – Italian-made – 2 sanding units – Unpainted – Used sander, in excellent condition Net price: PLN 77,900 Net price: EUR 18,550 (based on 4.2 EUR exchange rate) (Prices may vary with significant fluctuations)

Koşul: ikinci el, Üretim yılı: 2018, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 351.09.006.18, DDG INSOLVENCY I.P.U.R.L., headquartered in Cluj-Napoca, 115 Septimiu Albini Street, Cluj County, VAT No. RO27987796, registration number 2A0522, represented by insolvency practitioner Godorogea Daniel-Lucian, acting as judicial liquidator of ELEMENTO MOBILI S.R.L. - in bankruptcy, with registered office in Dej, 6 Dumbrava Roșie Street, ground floor, apt. 1, Cluj County, registered with the Trade Register attached to the Cluj Tribunal under no. J12/2389/2016, unique registration code 36225390, appointed by Civil Sentence no. 1278 of 03.07.2025 issued by the Cluj Specialized Tribunal in file no. 442/1285/2025, is organizing a public auction with ascending bids for the sale of each asset individually, as listed in this announcement. The first auction will take place on 08.04.2026 at 15:00 at the DDG Insolvency I.P.U.R.L. office, Cluj-Napoca, 115 Septimiu Albini Street, Cluj County. In case of no sale, the auction will be repeated on 15.04.2026, 22.04.2026, 29.04.2026, 06.05.2026, and 13.05.2026, under the same conditions and at the same time. For asset viewing, the judicial liquidator will organize a viewing day on 06.04.2026 between 09:00-12:00. Interested parties are invited to contact the judicial liquidator at 0763 478 619 to express their intention to attend prior to the scheduled date. During the course of the auction process, the judicial liquidator will organize additional viewing dates, which will be communicated to interested parties. Upon a successful bid, the judicial liquidator will issue the tax invoice for the value of the awarded assets. The conversion of the price into RON will be made on the date the tax invoice is issued, using the exchange rate set by the National Bank of Romania for that date. The bidding increment is set at 5% of the starting price. Djdpfjyfg E Nox Almjut The auction participation file will be prepared by the judicial liquidator in accordance with standard industry practice, will contain the auction participation rules and will be made available by the insolvency practitioner at the price of 500 lei+VAT for assets up to €5,000 and 1,000 lei+VAT for assets over €5,000. The participation file can be purchased at the liquidator’s office, or by phone and then sent by email to the participant. The participation guarantee is 10% of the starting price. This guarantee, together with the auction registration documents, must be submitted at least 24 hours prior to the auction date at the judicial liquidator’s office. The participation guarantee will be deducted from the price of the assets for which a participant is declared winner, and will be refunded to those who are not declared winners. In the case of identical price offers, the winner will be the party that commits to pay the full amount within the shortest timeframe. The payment deadline is 5 business days from the adjudication date. If the remaining amount is not paid, the winning bidder will forfeit the security deposit paid as guarantee and will not be allowed to participate in future auctions organized.

Üretim yılı: 2001, Koşul: iyi (kullanılmış), Masa çapı 200 mm İş parçası yüksekliği 100 mm Disk sayısı 1 Robot CNC kontrolü Toplam güç gereksinimi 6 kW Makine ağırlığı yaklaşık 1,8 ton Alan gereksinimi yaklaşık 1,83 x 2,04 x 2,1 m Teknik veriler - Taşlama kapasitesi : Ø 0.025 -12.7 [mm] - Çubuk çapı : Ø 1.0 -12.7 [mm] - Taşlama uzunluğu : W15 (opsiyon W20) Taşlama uzunluğu : W15 (opsiyon W20) - Z ekseni : 35 [mm] Çözünürlük : 0.5 [µm] - X- ekseni : 25 [mm] Çözünürlük : 0.1µm - Y ekseni : 286 [mm] Çözünürlük : 0.5µm - U- eksen: 15 [mm] Çözünürlük: 0,1µm Kafa Motoru: 0,70 [kW] Dönüş: 300 - 3000 [rpm dak] Taşlama - kaba taşlama : 1,5 [kW] Mil : Ø 60 [mm] Taşlama diski Çap : Ø 200 [mm] Kesme hızı : 30 m/sn. - Son İşlem : 0,75 [kW] İş mili : Ø100 [mm] Taşlama diski çapı : Ø150 [mm] Kesme hızı : ayarlanabilir - Boyutlar (U x G x Y) : 1830 x 2040 x 2100 mm - Ağırlık : yaklaşık 1800 [kg] Aksesuarlar - Yükleme ve boşaltma robotu - Yangın koruma cihazı KONTROL eksenleri; 4 eksen + Dujdstt Tb Dspfx Almst 2 programlanabilir robot - 4 eksenin eşzamanlı doğrusal enterpolasyonu + 2 eksenin silindirik enterpolasyonu 2 robot ekseninin silindirik interpolasyonu

Koşul: iyi (kullanılmış), Kod: 0424 Marka: DMC - ITALY Model: EUROPA 120 Ahşap, mobilya, döşeme, ahşap çerçeveler, kapılar, paneller, kompozit malzemeler ve çeşitli Teknik veriler: Sağlam yapı Maksimum çalışma genişliği mm 1200 Maksimum çalışma yüksekliği mm 170 Aşındırıcı bant boyutu mm 2200 x 1250 1° Grup Kauçuk Kalibrasyon Silindiri - Çap mm 220 - Ayarlanabilir iş parçası tutma basınç braketleri - Motor Hp 20 Ayarlanabilir basınçlı 2° Grup Bitirme Pedi - Motor Hp 10 Aşındırıcı bant temizleme üfleyicileri 3,5 ila 17,5 mt/dak bant besleme hızı varyatörü Vakum masası - Motor Hp 7,5 Otomatik masa kaldırma Dsdpfx Asv A Ta Delmsut Otomatik masa konumlandırma N° 2 emiş girişi çapı mm 200 Çalışma basıncı 7 bar Genel boyutlar mm 1900 x 1800 x 2100 h Ağırlık kg 2500

Koşul: iyi (kullanılmış), Code : 0312 Brand : TAGLIABUE - COSTA LEVIGATRICI Model : TAG 11 - CE-compliant Automatic calibrating sanding machine with 2 belts and movable head, suitable for furniture manufacturing, carpentry, bespoke furnishings, panels, solid wood, tables, composite materials and more - conforms to CE standards. - Monoblock steel construction Dujdpfxsynk Dns Almst - Conveyor table features a thick, precision-ground steel structure - Sanding belt motors housed within the base - Rubber conveyor belt made with 3-ply fabric, sectioned into rings for consistent belt tracking - Base features plate thickness up to 30 mm - Movable head with large lifting columns for head adjustment Technical Specifications: - Working width: 1350 mm - Working thickness: 3–130 mm - Fixed working table height: 900 mm - Feed speed: 5 to 30 m/min - Belt dimensions: 1400 x 2620 mm - Working thickness digital display Configuration: - 1st group: Steel calibrating roller, diameter 280 mm - 2nd group: Rubber sanding roller, diameter 300 mm - Cleaning brush, 2 Hp motor, extraction port diameter 160 mm - Total installed power: 57 kW - Required compressed air: 7–8 bar - Overall dimensions (L x W x H): 2100 x 2300 x 2400 mm - Weight: 5500 kg

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with Veneer Sanding Attachment Sanding unit tiltable up to 45° via lever The machine base is constructed from welded steel, ensuring high torsional rigidity and vibration-free operation. Oscillating sanding belt driven by a separate gear motor for improved sanding results Oscillation can be switched on or off as required Sanding shoe with graphite lining for increased sanding belt lifespan Height-adjustable sanding table to utilize the entire sanding belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length differences Double extraction ports Extendable roller table extension Rubber-coated sanding roller Veneer edge sanding device with contact shoe featuring fine adjustment, relief rollers, and stop rulers Infeed ruler with grooves for veneer overhangs Quick adjustment between veneer edge and solid wood sanding Dimensions and Weights Length approx. 1,900 mm Width/Depth approx. 900 mm Height approx. 1,350 mm Weight approx. 290 kg Dust Extraction Connection Extraction port diameter 140 / 100 mm Drive Power Duedpey Iu N Aefx Almet Oscillation motor 0.25 kW Work Table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Connection voltage 400 V Sanding Unit Sanding belt length 3,000 mm Sanding belt width 200 mm Belt speed(s) 20 m/s Sanding surface length 1,050 mm Sanding surface width 200 mm Oscillation stroke 20 mm Location: In stock at 54634 Bitburg - immediately available -

Koşul: ikinci el, Kündig ENORM PRIMO – ÜST DÜZEY SABİT MASA MAKİNESİ / otomatik kafa ayarı Geniş bant kalibrasyon ve ince zımpara makinesi Dsdjyyltcspfx Almsut Kombi ünite: temas silindiri ve pnömatik zımpara pedi ünitesi Enormatic İş parçası kalınlığı için dijital kalınlık göstergesi Bant tahrik motor gücü yaklaşık 9 kW Temas silindiri seviyesi kademesiz olarak kum tanesi ölçeğine göre ayarlanabilir Giriş ve çıkış tablası, makaralı destekli Çalışma genişliği: 1100 mm İlerleme hızı: 2,5 - 15 m/dk Makine ATÖLYEDE REVİZE EDİLMİŞTİR Lieboch stoktan teslim

Koşul: ikinci el, BOGMA geniş bant zımpara makinesi, Tip: KFY-M, Numara: A0091, 2 ünite: birinci kauçuk silindir, ikinci zımpara pabucu Djdexrzudopfx Almout

Koşul: yeni, Üretim yılı: 2023, Orbital zımparalar sandalye, masa, yatak ve ilgili eşyalar için yuvarlak veya oval kesitli, vb. değişken kalınlıktaki düz, kavisli ve şekilli parçaları zımparalamak için tasarlanmıştır. Makinenin ana özellikleri şunlardır: Elektro kaynaklı çelik malzemeden yapılmış çerçeve - İş parçası etrafında dönme hareketi sağlayan, elektrik motoruyla tahrik edilen 2 adet ters yönde dönen zımpara kayışına sahip döner disk - Elektrik kontrol paneli - 2 adet ayarlanabilir çalışma tezgahı (giriş - çıkış) ) - İnvertör kullanarak hızı ayarlanabilir 2 adet otomatik iş parçası besleme ünitesi kurma imkanı. Zımpara bantları: 80 x 1260 mm Minimum Maksimum. İş parçası çapı: 10-100 mm (fi) Minimum. Eğrilik yarıçapı: 200mm Boyutlar: 760x1000x1800 mm Duedpfx Aeqnufvolmot 3 adet Camam, Comec, OMEF, Brusa di Garboli

Koşul: ikinci el, Üretim yılı: 2008, toplam uzunluk: 2.060 mm, toplam genişlik: 830 mm, toplam yükseklik: 1.180 mm, Renk: Gri Boş ağırlık: 566 kg - Üretim yılı: 2008 - Dokümantasyon mevcut: Hayır Djdpfsywlfyex Almeut - CE sertifikası mevcut: Hayır - Tabla uzunluğu [mm]: 1000 - Tabla genişliği [mm]: 400 - Zımpara bandı genişliği [mm]: 200 - Zımpara bandı uzunluğu [mm]: 3200 - Emme bağlantı çapı [mm]: 120 - Taşıma bandı hızı [m/s]: 13 - Min. salınım açısı [°]: 0 - Maks. salınım açısı [°]: 45 - Taşıma ölçüleri: 2060mm x 830mm x 1180mm (u x g x y) - Taşıma ağırlığı [kg]: 566kg Finansal bilgiler KDV: Belirtilen fiyat KDV hariçtir KDV/farklı vergi uygulaması: KDV girişimciler için indirilebilir Endüstri ekipmanlarının tamamı için her zaman teslimat ve takas mümkündür Yorick Diebels

Koşul: ikinci el, Üretim yılı: 1996, çalışma saatleri: 12.171 h, Color: Grey BOERE Sanding System “Compact” Elite Year of manufacture: 1996 (CE) Operating hours: 12,171 Maximum working height: 150 mm Maximum working width: 1,300 mm Elite BKKS 1300 - First motor: 45 kW - Second motor: 30 kW - Third motor: 18.5 kW - Voltage: 380 V, 183 amps Elite TKKS 1100 - First generator motor: 45 kW - Second generator motor: 30 kW - Third generator motor: 18.5 kW - Voltage: 380 V, 172 amps Refurbished by Boere in 2019 - Year of manufacture: 1996 - Documentation available: No - Under-sander: - CE certificate available: No - Operating hours: 12,171 - Max. working width [mm]: 1,300 - Max. working height [mm]: 150 - Motor output first unit [kW]: 45 - Motor output second unit [kW]: 30 - Motor output third unit [kW]: 18.5 Djdpewnh Eqsfx Almjut - Sanding pad present: No - Top sander: - Motor output first unit [kW]: 45 - Motor output second unit [kW]: 30 - Motor output third unit [kW]: 18.5 - Structuring brush present: No - Sanding pad present: No - Voltage [V]: 380 - Power consumption [A]: 172 Financial information VAT: The indicated price is plus VAT VAT margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all types of industrial equipment Yorick Diebels

Koşul: mükemmel (kullanılmış), Üretim yılı: 2023, For sale is a JET drum sanding machine 2244 equipped with a 1.8 HP motor and a maximum sanding width of 560 mm. The machine is in excellent condition and has been inspected and reconditioned by our service team. Technical specifications: - Sanding width: 560 mm (1120 mm) - Sanding thickness: 0.8 - 102 mm - Variable feed rate: 0 - 3 m/min - With oscillation - Drum speed: 1450 rpm - Dust extraction connection Ø 100 mm - Motor output: 1.8 HP / 230 V - Year of manufacture: 2023 / as new The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Dedpfx Aljyzqtqemout Related terms: JET 2244, sander, drum, oscillation, sanding machine Reference: R-L0B6O

Koşul: ikinci el, Kullanılmış makine Durum: yaşa uygun Djdpfswka Rwex Almsut Teknik veriler: Masa boyutu 2600 x 900 mm Maks. kullanılabilir zımparalama uzunluğu 2500 mm Kayış uzunluğu 7100 mm x 150 mm 1100 mm ofset sağ Kullanılabilirlik: kısa dönem Konum: Solingen

Koşul: ikinci el, Bant zımpara makinesi BÜRKLE BSU 2500/800 - ikinci el - Zımpara bandı kapağı, Emme fanı ----- Teknik veriler ----- Tabla ölçüsü: 2.500 x 800 mm, Motor: 5,5 kW, Zımpara bandı boyutları (UxG): 7.200 mm Djdpfoxlt Ebex Almeut

Koşul: mükemmel (kullanılmış), HOLZKRAFT LBSM 2505 Belt Sander -used- Sanding belt cover, Right-/left-hand rotation, Tiltable sanding unit ----- Technical Data ----- Table size: 2,400 x 800 mm, Throat depth: 650 mm, Motor: 3 kW, Sanding belt dimensions (L x W): 150 x 6,400 mm Dodpsyfwcrsfx Almsut Quality Information: - Belt tracking checked - Sanding shoe checked - Height adjustment checked - Sanding table guide checked - Thorough basic cleaning - Electrical system checked - Ready for immediate use

Koşul: ikinci el, Üretim yılı: 2000, toplam genişlik: 2.200 mm, toplam yükseklik: 2.200 mm, toplam uzunluk: 3.000 mm, çalışma genişliği: 1.350 mm, taşlama genişliği: 1.350 mm, toplam ağırlık: 3.500 kg, taşlama yüksekliği: 170 mm, güç: 46 kW (62,54 bg), No. 3271 Wide Belt Sander HEESEMANN MFA 6 Used, Year of manufacture: 2000 Multipurpose Surface Sanding Machine / 2-Belt Cross Sanding Machine Sanding width: 1350 mm Maximum sanding height: 170 mm 1 cross belt with electronic pressure shoe 1 longitudinal belt with electronic pressure shoe and roller 1 brush unit Total electrical power: 46 kW Suitable for veneer, lacquer and foil sanding, as well as calibration and fine sanding of solid wood Processing of longitudinally and transversely veneered parts possible Dodpfx Asy Eq R Rjlmeut Sanding of warped and differently foiled parts possible Variety of workpiece shapes possible (e.g. round, oval, rectangular, asymmetrical) CSD pressure beam system 32 mm fine sensing Tolerance compensation of 2 mm Cross sanding process Constant working height of the feed table Vacuum belt Dimensions (approx.): 3000 x 2200 x 2200 mm (L x W x H) Weight (approx.): 3500 kg Sale on behalf of the customer, from location near 71063 Sindelfingen, without disassembly, transport or assembly Disassembly, loading, and transport by us available as an option Errors in description and price excepted To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture and scope of delivery as per manufacturer’s brochure or previous owner, without guarantee Prior sale reserved For used machines, any warranty is excluded; sale as inspected applies Pictures and videos are for reference only and do not represent the actual delivery scope Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Koşul: ikinci el, Üretim yılı: 1993, used good condition cleaned function-tested partially overhauled With 1 / 2 / 3 sanding heads: 3 Number of calibration rollers: 2 Roller table at outfeed mm: 350 Automatic workpiece thickness adjustment / sensing Make: Viet Model: Target 321 Year of manufacture: 1993 Machine no.: 371293333 Working width approx. mm: 1100 Pass-through height approx. mm: 160 Number of calibration rollers: 1 with air shoe Calibration roller kW: 11 + 11 incl. shoe unit Dsdpfx Aoy Nn Axelmjut Calibration roller, grooved: 2x Calibration roller, rubber-coated: 2x Diameter mm: 150+220 Number of combination units: 1 with air shoe Combination unit kW: with 2nd Cal. 11 kW Extraction connection mm: 3 x 160 Required space approx. L x W x H mm: 2200 x 2000 x 2200 Weight approx. kg: 2300 Total connected load approx. kW: 23.5 Storage location: 97447 Gerolzhofen, free loaded, unpacked Handover: Handover in as-inspected condition without guarantee or warranty.

Koşul: ikinci el, Üretim yılı: 1995, used in good condition cleaned function-tested partially overhauled fully adjusted With 1 / 2 / 3 sanding units: 2 No. of calibration rollers: 1 Combination unit with air shoe / electronic shoe: 1 x air shoe Constant table height – consistent infeed height Automatic workpiece thickness adjustment / measurement Program control Manufacturer: Kündig – Enorm Model: Duplex 1100 Year of manufacture: 1995 Machine no.: ESG-24384 Working width approx. mm: 1100 Passage height approx. mm: 3 – 160 Duedpfxsy Nn Are Almot Number of units: 2 Units from above: 2 Belt dimensions (l x w) mm: 1120 x 2000 Feed speed m/min: 2 – 15 No. of calibration rollers: 1 Calibration roller grooved: yes No. of shoe units: 1 Shoe unit air shoe: yes Thickness adjustment electric / automatic / with measurement: yes Constant table, consistent infeed height: yes Space requirement approx. L x W x H mm: 1500 x 1700 x 2000 Weight approx. kg: 2000 Total connected load approx. kW: 20 Location: 97447 Gerolzhofen, free loaded, unpacked Handover: As-is condition as inspected, without guarantee or warranty.

Koşul: mükemmel (kullanılmış), Üretim yılı: 1997, Tagliabue TA G T12-KS-SIN 1350 geniş bant zımpara makinesi satıyorum, üretim yılı 1997. Konfigürasyon: 1 adet kauçuk zımpara silindiri Djdpsyzrqqsfx Almout 1 adet elektronik segment ayakkabı 1 adet enine bant ayakkabı Fırça + arkadan üfleme kombinasyonlu temizleme ünitesi Çalışma genişliği 1350 mm Kısa elemanlar için baskı çelik raylar Tüm üniteler için basınçlı hava ile temizlik Entegre fanlı vakum masası Hat için tasarlanmış, sabit çalışma yüksekliğinde ve hareketli üniteli yapı 3 motor, toplam güç 55 kW Durumu çok iyi! Hemen teslim edilebilir.

Koşul: mükemmel (kullanılmış), Üretim yılı: 1997, 1997 model Tagliabue TA G-13-KS-DX 1350 geniş bant zımpara makinesi satıyorum. Konfigürasyon: 1 adet kauçuk zımpara silindiri 1 adet elektronik segmentli ayakkabı Arka kısmında kombine fırça + hava üfleme temizleme ünitesi Çalışma genişliği 1350 mm. Kısa parçalar için çelik baskı kılavuzları. Dsdpeyzrpmefx Almout Tüm üniteler için basınçlı hava temizliği. Entegre fanlı vakum masa. Hat için tasarım, sabit çalışma yüksekliği ve hareketli üniteler 2 motor, toplam güç 40 kW Durumu çok iyi! Hemen teslim.

Koşul: ikinci el, Wide Belt Sander SCM Sandya 10S M2 110 Year of manufacture: 1999 Abrasive belt dimensions: 2620 x 1115 mm Voltage: 380V 1st Sanding Unit Contact roller: 180 mm Motor: 18.5 kW Dsdpfxownh A Aj Almjut 2nd Sanding Unit Combination unit with sanding pad Motor: 11 kW Maximum sanding width: 1100 mm Sanding height min./max.: 4 / 170 mm Feed speed: 4.5–9 m/min Dimensions: 2300 x 2205 x 2500 mm, Weight: 1850 kg - Documentation available: No - CE certificate available: No - Number of units: 2 - Unit 1: - Roller diameter [mm]: 180 - Motor power [kW]: 18.5 - Unit 2: - Sanding belt length [mm]: 2620 - Sanding belt width [mm]: 1115 - Motor power [kW]: 11 - Max. working width [mm]: 1100 - Min. working height [mm]: 4 - Max. working height [mm]: 170 - Min. feed speed [m/min]: 4.5 - Max. feed speed [m/min]: 9 Financial Information VAT: The indicated price is exclusive of VAT VAT/margin taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Koşul: ikinci el, Üretim yılı: 1995, Constant machine - combination station, dust brush - thickness measurement device - electronic segmented sanding pad MCS system Weber 32 mm - grooved steel calibration roller - belt blow-off - vacuum conveyor. Sanding width: 1100 mm. Drive: 15 kW. Feed approx. 1.1 kW. Height adjustment 0.25 kW. Sanding belt dimensions: 1150 x 2500 mm. Max. workpiece thickness: 150 mm. Machine width: 1700 mm. Machine length: 2000 mm. Machine height: 2160 + 150 mm. Machine weight: 1900 kg. Constant working height: 850 mm. Extraction port: belt 180 mm / brush 120 mm. Extraction air volume: 0.74 m³/s. Connected load: 23 kW. Compressed air connection value: 7 bar. Feed speed: 3-15 m/min. Operating hours: 7000 h. Storage location: Nattheim. Dujdpfxex Twcpe Almot