Kullanılmış Stas S300Cx 55M3 Alu,Coil satın al (10.748)

Koşul: iyi (kullanılmış), Takım arabası, atölye arabası, mobil atölye arabası, taşıma arabası, masa arabası, montaj arabası -Atölye arabası: Taşıma arabası Montaj arabası, katlanabilir -Uzunluk: 1600 mm Bdedpfsqzl H Asx Abzoc -Genişlik: 1100 mm -Yükseklik: 1020 mm -Döner tekerlekler: 4 adet frenli -Ağırlık: 103 kg

Koşul: ikinci el, Alet arabası, atölye arabası, mobil atölye arabası, taşıma arabası, masa arabası -Atölye arabası: Alüminyum taşıma arabası, çekmeceli -Uzunluk: 1030 mm -Genişlik: 610 mm -Yükseklik: 980 mm -Döner tekerlekler: 4, 2x frenli Bedpfx Abjqxvxwozedc -Ağırlık: 24 kg

Koşul: iyi (kullanılmış), Bağlama plakası, levha alanı, alüminyum plaka -Bağlama plakası: alüminyumdan, dişli deliklerle -Plaka kalınlığı: 25 mm -Dişli delikler: M12, 100 mm aralıklı -Ölçüler: bkz. teknik çizim fotoğrafta -Toplam boyut: 1290/800/H120 mm -Ağırlık: 65 kg Bdodpfjh Ely Iex Abzjc

Koşul: iyi (kullanılmış), Bağlama plakası, kaynak masası, doğrultma plakası, T-kanallı plaka - 3D kaynak ve çalışma masası - Paslanmaz çelik işleme için alüminyumdan - T-kanal sistemiyle konumlandırma ve son kaynak için - Bağlama yüzeyi: 1000x1000 mm Bdsdpfob A Iqaox Abzoc - 2x pnömatik sıkıştırma silindiri ve topraklama bağlantısı - Ölçüler: 1000/1400/Y1300 mm

Koşul: iyi (kullanılmış), Düz kayış kasnağı, dişli kasnak, çoklu kayış kasnağı, zaman kayışı kasnağı -Zaman kayışı kasnağı: Ø 75 mm -Tip: bilinmiyor -Yuva: Ø 25 mm -26 diş: kayış genişliği 32 mm -Adet: 4x zaman kayışı kasnağı mevcut Bdodsw E Ip Djpfx Abzsc -Fiyat: adet başı -Ölçüler: Ø 75 x 50 mm -Ağırlık: 0,3 kg/adet.

Üretim yılı: 2006, Koşul: iyi (kullanılmış), Katlı araba, taşıma arabası, montaj arabası Bdsdpfxob A H Dvo Abzjc -Boy: 1600 mm -Derinlik: 860 mm -Yükseklik: 1670 mm

Koşul: iyi (kullanılmış), Enjektör, siklon, dağıtıcı filtre tesisi, talaş emişi, toz emişi, emiş sistemi, havalandırma kanalları ve bağlantı parçaları için Bdjdpsffphbjfx Abzjc -Boru bağlantısı: Ø 190 mm -Konik parça: Ø 465 mm -Malzeme: alüminyum -Taşıma ölçüleri: 493/465/Y495 mm -Ağırlık: 13 kg

Koşul: iyi (kullanılmış), Enjektör, siklon, dağıtıcı; filtre tesisatı, talaş emişi, toz emişi, emiş sistemi, havalandırma kanalları ve bağlantı parçaları için Bdedpfjffphcjx Abzjc -Boru bağlantısı: Ø 190 mm -Konik parça: Ø 465 mm -Malzeme: alüminyum -Taşıma ölçüleri: 1100/580/Y490 mm -Ağırlık: 13 kg

Koşul: iyi (kullanılmış), Çalışma tezgahı, bağlama plakası, bilyalı makaralı masa, bilyalı masa, bilyalı makaralı masa -Yan masa: bilyalı makaralı tabla, yükseklik ayarlı alüminyum şase -Plaka: 1310 x 710 mm -Yükseklik: 940 mm -Ölçüler: 1310/710/H940 mm -Ağırlık: 43 kg Bsdpfxjupphge Abzjdc

Koşul: iyi (kullanılmış), Üç çeneli ayna, üç çeneli torna aynası Bsdpob A Nqwjfx Abzjdc -Üç çeneli ayna: sıkıştırma yardımı -Sıkıştırma plakası -Ayna boyutu: Ø 255 mm -Ağırlık: 20 kg

Üretim yılı: 2014, Koşul: yeni gibi (kullanılmış), makine/araç numarası: 20020235 UG, DEMAG ALU vinç kanopisi Vinç pist boyutları yaklaşık 6x4m Yük / kaldırma kapasitesi 250 KG - 0,25 ton Sistemin teknik verileri: Dahili güç kaynağı ile 180 mm Demag alüminyum raylardan yapılmış vinç pisti Sistem eksiksiz olarak tedarik edilir: Raylar, ray konektörleri, arabalar, uç plakaları, kablo çekme, braketler/askılar vb. Demag DCS PRO2-250 NL 250KG zincirli vinç dahil - kaldırma hızı 0-16m / dak !!! Demag DCS zincirli vinç 250KG (YENİ FİYAT 4700 Euro !) Maliyetleri düşürmek için standart bir DK2-250 modeli ile de değiştirilebilir - lütfen sorunuz! Bdedpfx Aoty S A Njbzsc YENİ DURUM - temiz odaya monte edildi! Vinç demonte ve hemen kullanılabilir durumda Nane durumu, resimlere bakın Ürünün bulunduğu yer 75053 Gondelsheim Nakliye acentesi tarafından nakliye veya sadece randevu ile teslim alma Demag KBK1 KBK2 ve KBK3 paletleri stok ürünleridir! Demag KBK kurulumları da stoklarımızda mevcuttur. Yük kapasitesi 125KG - 1600KG Lütfen kaldırma kapasitesi ve boyutları ile vinç pistiniz hakkında bilgi alın.

Koşul: ikinci el, Üretim yılı: 2007, makine/araç numarası: NBGMAN 1, Demag KBK1/2/ALU vinç kanopisi Çelik yapılı vinç pisti Boyutlar yaklaşık 10m x 4,6m, her biri 125kg taşıma / kaldırma kapasitesine sahip 2 köprü dahil Vinç pistleri birbirinden bağımsız olarak çalıştırılabilir. Sistemin teknik verileri: Vinç pisti / HEA 140 kirişlerinden yapılmış çelik yapı Boyutlar aşağıdaki gibidir: Dış boyutlar - alan gereksinimi yaklaşık 10 x 4,6 m tavan vinci ile taşıma kapasitesi 2x Demag DC zincirli vinç ile 2x 125KG Yaklaşık boyutlar: Üst çelik yapı 5.25m Alt çelik yapı 4.97m Alt çalışma rayı 4,66 / 4,78m (vinç başına) Alt köprü 4.31/4.50m Bdjdjr Igruspfx Abzjc Kanca yüksekliği 3.9/4.1m Vinç kiriş uzunluğu 4 + 6,7 m Desteklerin iç boyutu 4.4m Desteğin taban plakası 40x40cm Prop HEA140 Koşu rayları HEA140 Pervane aralığı 4,55 + 5,1 mm Sistem tedarik edildiği şekilde eksiksiz olarak sağlanır: komple çelik konstrüksiyon + 2x vinç dahil 2x Demag DC zincirli vinç 125KG Kullanılmış durumda Vinç sökülmüştür ve hemen kullanılabilir Ürünün bulunduğu yer 75053 Gondelsheim Nakliye acentesi tarafından nakliye veya sadece randevu ile teslim alma

Koşul: ikinci el, boş ağırlık: 7.910 kg, azami yük ağırlığı: 31.090 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2018, süspansiyon: hava, lastik boyutu: 385/65 22,5, lastik durumu: 40 yüzde, renk: gümüş, Üretim yılı: 2018, ön lastik ölçüsü: 385/65 22,5, arka lastik boyutu: 385/65 22,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: ABS, kamyon kaydı, Reference number for inquiries: 40573 Stas, S 300CX * Year of manufacture: 2018 * ABS (Anti-lock Braking System) * Air suspension * Lift axle * Air coupling head (red + yellow) Bsdpfx Aoyicqyebzjdc * 15-pin connector plug * Lifting and lowering device * Storage box / toolbox * Aluminum tipping body * Access platform * Roll-up tarpaulin * Grain discharge slider * Suspension: air * Gross vehicle weight: 39,000 kg * Unladen weight: 7,910 kg * Payload: 31,090 kg * Permissible total weight: 39,000 kg * Tire condition, 1st axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 50% -- 50% - Tire size: 385/65 R22.5 * Tire size: 385/65 R22.5 * Wabco SmartBoard * Rear support * Wear plates, right & left * Folding underrun protection Disclaimer: Subject to change, prior sale, and errors excepted. You can find additional photos and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering export license plates / customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please consult our trained staff; we will be happy to advise you.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2008, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium parts, continuous rubber strip pressure-bonded to the longitudinal members, maximum stability via integrated tipping shaft with wear-resistant, pressed-in special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit Axles and Suspension, Disc Brakes Jost-disc axle units 3 x 9 tonnes with DCA air suspension, lift and lower valve, load gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 50-60% tread on silver steel rims, 11.75x22.5 ET 120 Landing Legs Mechanical support legs, load capacity 2 x 20 t, swing feet used for air suspension Brake System According to E.C. standard, two-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E system 2S/2M, with RSS (Roll Stability Support), ALU air tank Electrical System According to StVZO regulations, with two 5-chamber Aspöck LED tail lights, 24 Volt system with two 7-pin and one 15-pin socket at the front, EBS socket, with LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Dump Bed ALU dump body, side walls with welded vertical aluminium profiles, floor approx. 6 mm in highly wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall angled design in 4 mm ALU with reinforcing profiles for hydraulic cylinder mounting, side walls in 3 mm hard alloy, straight rear wall, automatic pneumatic (lockable) universal tailgate with pendulum and 2/3-1/3 barn door configuration, double hinge, made from 4 mm thick aluminium, 1 grain chute with water protection, wear plates fitted on side approx. 400-1,000mm x 3,000mm x 4mm Bdodjxf Spfopfx Abzjc Hydraulic System Hydraulic cylinder mounted at the front wall, operating pressure 150 bar, brand Edbro, with approx. 2 m hydraulic hose and 1" quick-release coupling Accessories 6 Parlok plastic mudguards with 2 Stas splash guards, 3 m aluminium ladder, reinforced and foldable underrun protection with 2 towing eyes, one foldable side underrun guard, catwalk on front wall with access ladder (left side), 3 swivelling ALU bows, 1 central additional bow holder, rolling tarp with aluminium tube in centre, rolling tarp system, approx. 660g/m² quality, tarp fastener with quick-action lock (no lashing straps), wheel brace, 2 chocks, toolbox type 800, continuous splash flap on underrun guard, etc. Offer and images are subject to prior sale/change.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2021, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.200 mm, yükleme alanı hacmi: 53 m³, Chassis, Lightweight Version Made of aluminum (15-6-12) Two fully-automated, welded I-beams longitudinally, with welded cross members. Chassis width: 1,600 mm Axles and Suspension: 430 mm disc brakes, 'Off-Road Version', SAF Intradisc Light axle units, 3 x 9 t with SAF air suspension, centrally aligned with the chassis longitudinal member, 1st axle liftable via air bags with starting aid and manual forced lowering, SmartBoard info center, Hebert lowering valve, front load pressure gauge Wheels and Tires on Aluminum Rims 6 wheels with 385/65 R 22.5 tires, approx. 50% tread, wheels 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims Kingpin 2” screw-in on an 8 mm thick 'light' mounting plate Landing Legs Support winches, each with 20 t capacity, swing foot for air suspension Bdedpfx Asyiw T Eobzsc Brake System According to EC standards, dual-line Wabco system, spring-loaded parking brake acting on two axles, and Wabco EBS-E incl. RSS (Roll Stability System), Wabco SmartBoard Info Center, aluminum air tank system Electrical System According to German Road Traffic Licensing Regulations (StVZO), with 3 round triple-chamber Aspöck tail lights, 24-volt system with 2x7-pin and 1x5-pin sockets, 2x7 side marker lights, 2 centrally mounted LED reversing lights, 1 round fog lamp, 4 LED work lights, 1 interior LED light, 4 red LED position lights in rear door frame All air and electrical lines are properly laid in plastic conduits! Tipper Body / Tipping Body, "Smooth Construction" Body internally fully welded, aluminum tipping body, 30 mm thick plank profiles (2-3 mm), 600 mm wide welded side panels, 8 mm thick highly wear-resistant floor alloy (5383H34/HB 110) with 90° profile to side wall, 4 mm reinforced, straight front wall, universal straight rear door with two half-and-half swing doors and a grain chute, universal door automatic pneumatic operation with separate lockable lever, swingable ALU rear hoop, two hold-downs with rubber buffers on the tipper body fixed to the front wall frame. Hydraulic System—Tipping Cylinder with "Cladding" Mounting Hydraulic cylinder mounted on front wall with working pressure of 150 bar, Edbro brand, with approx. 2.5 m hydraulic hose and loose end 1”, tipping angle appx. 48° Accessories 6 Parlok mudguards, full-width splash guard mounted on underrun protection, no spare wheel holder, foldable aluminum side underrun protection (right), large Type 860 toolbox, approx. 3 m aluminum ladder, 3 central aluminum swing hoops, approx. 150 mm raised, additional mid mount, roll tarp with central skylight and extra reinforcement in wear areas, quality approx. 660 g/m², roll tarp system with quick-tension closure, all-round rubber rope at rear with two tension hooks to fasten on rear swing hoop, walkway on the frame, rear tarp edge has welded-in rubber cord for water protection, robust foldable underrun guard, 2 "Clear-Pass" spray flaps on the mudguard (EU standard), ALU grain funnel with dust sack fixed to the side of the frame, holders for shovel, broom, and scraper above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, yükleme alanı uzunluğu: 10.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 50 m³, Chassis light version Aluminium (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brakes 430 mm "Off Road Version" SAF Intradisc axle units 3 x 9 t with SAF air suspension, central air bag arrangement next to the chassis longitudinal beams, 1st axle liftable with drive-off aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with trailing steering, electrically lockable, Bsdpfx Abjxf Sn Ijzedc Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres, approx. 40-50 % tread remaining, with Alcoa aluminium rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminium rims Landing Gear Mechanical version with single-side operation, 2 speeds, with swing foot for air suspension, 2x20t static load capacity Braking System According to E.C. standards, twin-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E including RSS (Roll-Stability-System), Wabco Smartboard info center, aluminium air reservoir system Electrical System According to StVZO regulations, with 2 five-chamber lamps type Aspöck Ecopoint 2, 24-volt system with 2x7- and 1x15-pin sockets, with lateral outline marker lights, 2 separate LED reversing lights at the rear. All air and electrical lines neatly installed in plastic tubing. Tipping Body/Bin Body, fully welded interior Aluminium bin, side walls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded, floor 8 mm thick high wear-resistant alloy (5383H34/HB 110), bulkhead 4 mm reinforced in straight version, rear wall as double swing doors in straight version with 2 half/half doors each with a grain chute, pneumatic floor vibrators underneath, rear hanger made of aluminium, swing-out, two hold-downs with rubber buffers on the tipper bin attached to the frame at the bulkhead, Hydraulic System Tipping cylinder with "cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted to the bulkhead, working pressure 220 bar, make Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48° Accessories 6 Parlok mudguards, full-width spray flaps fitted to underrun protection, aluminium spare wheel holder, foldable lateral underrun protection right-hand side, large 860-type toolbox, approx. 3 m aluminium ladder, 3 mid-position, approx. 150 mm raised swing bars, rolling tarp with central light strip and separate reinforcements at wear points, approx. 660 g/m² quality, with rolling tarpaulin system, perimeter rubber cord in rear end of tarp with two tension hooks to fix onto the rear swing bar, catwalk on bin with access on left, side tarp lock with tensioning straps, rear tarp closure with welded-in rubber cord for water resistance, robust foldable aluminium underrun guard with two towing eyes left and right including locking pins, 2 "Clear-Pass" spray flaps on the mudguard to EC standard, etc. Offer and images non-binding.

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Axles and Suspension "Disc brake 22.5" Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Tyres and Wheels Bedpfoyh S Aijx Abzedc 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Landing Legs Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Electrical System According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps,

Koşul: yeni, azami yük ağırlığı: 28.320 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, Chassis: Constructed with a continuous frame, newly manufactured in a self-supporting aluminum (ALU) design featuring appropriate reinforcements in the lower flange for exceptional stability and strength. Crossmembers are 140mm high and reinforced (for high floor load capacity). Additional reinforcement via gusset plate in the front lower flange/vehicle frame area. Chassis from galvanized steel up to the support structure. Bedefi Nmwepfx Abzodc Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton with DCA air suspension, lifting and lowering functions, Wabco Smartboard info center, electronic brake wear indicator BVA readable in the tractor unit (display). First axle with traction assist (new EC regulation, without tractor unit installation). Optionally, first and third axles liftable as per MP request. Tyres and Wheels: 6 wheels with tires, size 385/65 R 22.5 as per manufacturer's choice (Br-Go-Co), on silver steel rims, size 11.75x22.5 ET 120. King Pin: 2" bolted into a 10mm thick plate. Landing Legs: Mechanical landing gears with two speeds, 2x 20-ton support load, swing foot. Brake System: According to E.C. norms, EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles, controlled from the rear, ALU air reservoir system. Electrical System: According to EC Norm 91/633 and 97/28 with two five-chamber rear lamps, Aspöck Europoint type, integrated in ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets. LED side marker lights, two reflective plates at the rear, front position lights (2x white), rear position lights (2x red), two separate halogen reversing lights integrated in underrun protection. Superstructure/Body: Interior fully welded. Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls of 30mm thick ALU plank profiles (2-3mm), 600mm wide, fully welded with upper and lower flange. Plank profiles fully welded inside. Floor with moving floor system laid on 140mm ALU crossmembers, forklift load approx. 9 t/m2. Crossmembers at approx. 350mm spacing for dense mounting. Special ALU corner profiles in chiseled design. Smooth rear wall, straight design, with two ALU swing doors, 50/30mm thick, with two rod locks mounted in a welded-in ALU rear frame with Teflon and stainless-steel bearings. Doors secured in opened position with lateral chains. Hard wear plates on side walls (approx. 2000x1500x4mm), fully welded. Mobile residual discharge wall with Kevlar tarpaulin, approx. 1800mm long plus lateral brushes with Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System: Moving floor system in the floor with hydraulically operated ALU profiles on ALU square profiles with approx. 880 PE-HD sliding elements and additional anti-lifting slide bearings, Type CF 10mm floor version. Hydraulic stroke approx. 200mm. Fixed ends at the front wall. Separate hydraulic connection possibility under the vehicle with fixed halves, pipe size NW 21. Fixing half with size and design to be specified. Operating pressure 190-max. 240 Bar. ALU end sections welded into the moving floor. Electric control rear left with remote integrated in lockable watertight box. Without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-spray flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, foldable side ALU underrun protection, one toolbox approx. 860x460x400

Koşul: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 40 m³, Donanım: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle with lift, starting aid and electric actuation, raise/lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires mounted on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gear with single-sided operation, brake system according to E.E.C. standard, dual-line Westinghouse system, spring brakes acting on two axles, EBS electronic braking system from Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system per Road Traffic Licensing Regulations (StVZO) with two Aspöck five-chamber lights, 24-volt system, aluminum tipper body, hydraulics by Edbro incl. approx. 2 m hydraulic hose, 6 PVC mudguards with rubber splash flaps, side underrun protection, rear underrun protection, catwalk on the frame, fully welded, LL rubber gasket, spindle locks on the rear door, prepared for vibrating plate installation, mud-proofed! ADDITIONAL EQUIPMENT AVAILABLE ON REQUEST COLOR FREELY CHOICEABLE +590¤ delivery charge *Pictures and offers are subject to change* Bedpfxju Dvw Eo Abzedc

Koşul: yeni, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, - Panama floor 900g - 10 mm floor thickness - V-sheets 2000x1500x4 - Service door on the front wall - 12 pairs of lashing rings in the front wall Chassis: Reinforced continuous chassis, new superstructure manufactured in self-supporting design with appropriate reinforcements in the lower chord for particularly high stability and strength, 140 mm high cross members in reinforced design Axle and suspension Disc brakes 22.5, Jost axle assemblies, 3 x 9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA), first axle with traction help (without tractor unit equipment) Tyres and wheels 6 wheels with 385/65 R 22.5 premium tyres (manufacturer optional) mounted on steel rims, 11.75x22.5, ET 120 Landing legs Mechanical landing gears, 2 x 20 t support load Brake system EBS E-System by Wabco with RSS system (Roll Stability Support) and premium modulator, spring-loaded brake system acting on two axles, operated from the rear Electrical system According to EC directives 91/633 and 97/28, with 2 Aspöck Europoint five-chamber lamps integrated in the aluminium rear end, 24V system with 1 x 15-pin and 2 x 7-pin sockets, LED side marker lights, 2 separate LED reversing lights integrated in the underrun protection Superstructure / Tipper body Superstructure fully welded inside, reinforced side walls. Aluminium tipper body, side walls made of 30 mm strong aluminium plank profiles (2-3 mm wall thickness), 600 mm wide, fully welded with lower and upper chord, plank profiles fully welded on the inside. Aluminium front wall with 600 mm plank profile, 2-3 mm wall thickness, straight design, with 2 aluminium swing doors 50/30 mm thick, with sliding residual discharge wall with Kevlar cover approx. 1,500 mm length, plus side Kevlar curtain seal Hydraulic system: 'Cargo Floor' moving floor system Moving floor system in the body floor with hydraulically actuated aluminium profiles, mounted on aluminium square profiles with approx. 880 PE-HD sliding elements, CF type 8 mm floor design, fixed sections at the front wall, separate hydraulic line connection under the vehicle with fixed sections, operating pressure 190 - max. 240 bar, aluminium end pieces welded in the moving floor, without hydraulic hoses Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 1 aluminium spare wheel holder, side aluminium underrun protection in foldable design, 1 plastic toolbox approx. 860x460x400 mm, 3.7 m aluminium ladder, tarpaulin approx. 660g/m^2 with tarpaulin system incl. rolling slat, optional with side tension belts or quick release, catwalk on front wall with access ladder, 3 steel hoops with swing-out and lockable fastener, aluminium protective cover with foldable hinges for lighting, etc. +590€ delivery cost Bdsdpfjfi Nmpox Abzec Unladen weight: approx. 7,700 kg Offer and photos non-binding

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg). Landing gears Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet. Brake system According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator. Electrical system According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside. Body/tipper body — "Body fully welded inside" Bdsdpfx Aogcw Rijbzjc Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead. Hydraulic system "Cargo Floor" 24 board system — smooth version! Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.880 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 47 m³, Donanım: ABS, Tipping semi-trailer with ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3x9 t axles with air suspension, 1st axle lift with starting aid and electric activation, raising and lowering valve for air suspension, Wabco SmartBoard, brake wear indicator, 6 wheels with 385/65 R22.5 size tires mounted on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gears with single-sided operation, braking system compliant with EEC standards, dual-circuit system, spring actuators operating on two axles, and Wabco EBS electronic system with RSS (Roll Stability Support), aluminum air tank, electrical system in accordance with StVZO with 2 Aspöck five-chamber tail lights, 24 volt system, aluminum tipping body, Edbro hydraulic system with about 2 m hydraulic hose, 6 PVC mudguards with rubber splash guards, lateral underrun and side impact protection, catwalk on the chassis, fully welded, long-life rubber seals, spindle locks on the rear door, body optionally also available mud-tight! Combination tail door split 2/3–1/3 with grain slider and automatic pneumatic locking. ADDITIONAL EQUIPMENT AVAILABLE ON REQUEST COLOR OPTION FREELY SELECTABLE +590€ transfer costs Also available in models Z9–Z13 Bjdpsu Dvw Sefx Abzodc *Pictures and offers are non-binding*

Koşul: yeni, azami yük ağırlığı: 28.840 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.660 mm, yükleme alanı genişliği: 2.250 mm, yükleme alanı yüksekliği: 2.350 mm, yükleme alanı hacmi: 50 m³, Donanım: ABS, Example: STRONG & LIGHT, now also available for heavy-duty applications, starting from 40 m³ loading volume and 6,600 kg. Bodpfx Aehfiqcebzedc STRONG & LIGHT, now also available for heavy-duty applications, from 40m³ loading volume and 6,600kg ----Example: High-quality aluminium chassis with high-strength steel body, ACTUAL WEIGHT 7,160 KG, Chassis with 3x9t DCA axles, equipped with 430mm disc brakes, 6x steel rims, 1st axle as lift axle with starting aid, aluminium drop-leg supports (can be uncoupled when loaded), foldable underrun protection, digital load pressure gauge (indicates axle load), toolbox, access ladder, Body made from HB450 steel plates, floor thickness 5mm, side walls and rear doors made from 4mm HB450 steel sheets, swing doors (split 1/2 - 1/2) with grain chute on the right, remote unlock for rear doors, doors sealed with round steel (alternative rubber seal available – mud-tight), rolling tarpaulin with central pipe, aluminium fender to protect the roof tarpaulin during loading, platform mounted on the frame, EdBro tipping cylinder with long sleeve, loading height = 3,650mm. (Some vehicles shown include special equipment options) ----For further equipment details and a detailed vehicle offer, please contact us. Various loading volumes, vehicle lengths and heights available. Paintwork and equipment specifications as per customer's requirements +500¤ delivery costs All offers and images subject to change.

Koşul: ikinci el, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2019, * Kaldırma aksı * ALU jantlar * JOST akslar Bdodpfx Absw Rit Tozjc * Rulo branda * Boş ağırlık: 7.760 kg -----Dahili araç numarası: 10296----Hatalar ve ara satış hakkı saklıdır WhatsApp desteği mevcut! Araçla ilgili sorularınız veya daha fazla bilgi için bizimle WhatsApp üzerinden kolayca iletişime geçebilirsiniz

Koşul: ikinci el, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2017, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 13.179 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 2.800 mm, Donanım: ABS, * Stas kayar zemin Bedpfx Abexu Th Ujzsdc * Branda * Alüminyum jantlar * SAF dingiller * Boş ağırlık: 7.790 kg * Model yılı: Dahili araç numarası: 11498-----Hatalar ve ara satışlar saklıdır