Kullanılmış Forestry Mulcher satın al (194)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Burghaun
2.382 km
Westtech Woodcracker CS545 kıskaçlı testere / YENİ / stokta!
WesttechWoodcracker CS545 Greifersäge / NEU / lagernd!
Ara
Durum: ikinci el, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...).
Westtech Woodcracker CS545 compact grapple saw / incl. endless rotating tiltator / BRAND NEW / in stock & immediately available
Cutting diameter (mm): 540
Grapple opening (mm): 1,270
Own weight (basic – fully equipped) (kg): 610 – 780
Recommended main circuit flow rate (l/min): 50 – 100
Recommended auxiliary circuit flow rate (l/min): 35 – 50
Recommended operating pressure (bar): 200 – 250
Carrier vehicle operating weight (t): 8 – 15
Features:
- Incl. endless rotating tiltator
- Incl. automatic lubrication system for tiltator
We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available immediately.
Our warehouse stocks a large selection of various Westtech products for immediate delivery!
Mr. Herden (Tel. ...) will be happy to assist you.
Upon request, we can provide you with a financing offer.
We are an official Westtech sales and service partner.
We are an official Magni telehandler sales and service partner.
We are an official Gierking GMT sales and service partner.
We are an official OilQuick sales and service partner.
We are an official Weber MT sales and service partner.
We are an official Holp sales and service partner.
We are an official DMS sales and service partner.
We are an official Seppi M. sales and service partner.
We are an official JCB construction equipment sales and service partner.
We are an official Mercedes-Benz sales and service partner.
We are an official Iveco sales and service partner.
Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany.
We supply the complete Westtech Woodcracker range for you!
Errors and prior sale excepted.
= More information =
New: Yes
Part suitable for: forestry applications
Iiodpfjyi R Atex Apysc
Please contact Marius Herden for further information.
Küçük ilan
Burghaun
2.382 km
Westtech Woodcracker C250 ağaç kesme kafası Tiltator MS10 / 2020 ile
WesttechWoodcracker C250 Fällgreifer Tiltator MS10 / 2020
Ara
Üretim yılı: 2020, durum: ikinci el, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...).
Westtech Woodcracker C250 / Tiltator / MS10 / Immediately available / Year of manufacture: 2020
Price: €17,890.00 net / €21,289.10 gross
- Cutting diameter softwood (mm): 300
- Cutting diameter hardwood (mm): 280
- Grab opening (mm): 930
- Shear opening (mm): 450
- Own weight (basic to fully equipped) (kg): 580-970
- Recommended oil flow rate (l/min): 50-100
- Recommended flow rate for auxiliary functions (l/min): 35-50
- Recommended operating pressure (bar): 280
- Carrier vehicle operating weight * (t): 7-15
Features:
Iiedpfxoykhv Ts Apyoc
- Tiltator, infinitely rotatable
- Autospeed function
- Integrated Multigrip
Option: MS10 adapter plate including bolts and installation = €1,950.00 net
We stock a wide selection of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) – available immediately.
Our warehouse holds a large range of various Westtech products, all available for immediate delivery!
Mr. Herden (phone ...) will be happy to assist you.
Upon request, we are also pleased to provide you with a financing offer.
We are an official distributor and service partner for:
- Westtech
- OilQuick
- Holp
- Magni Telehandlers
- DMS
- Weber MT
- Seppi M.
- JCB Construction Machinery
- Mercedes-Benz
- Iveco
In addition, with 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany.
We supply the complete range of Westtech Woodcracker products!
Errors and prior sale excepted!
Internal no.: 320479
= More information =
New: No
Part suitable for: Forestry applications
Please contact Marius Herden for further information.
Küçük ilan
Burghaun
2.382 km
Westtech Woodcracker C250 ağaç kesme kelepçesi / DEMO / 2018
WesttechWoodcracker C250 Fällgreifer / DEMO / 2018
Ara
Üretim yılı: 2018, durum: ikinci el, For enquiries regarding the attachment, Mr. Herden will assist you by phone.
Westtech Woodcracker C250 / Tiltator / Collector Grapple / Available Immediately / Year of Manufacture: 2018 / Excellent Condition!
Price: €21,890.00 net / €26,049.10 gross
- Cutting diameter softwood (mm): 330
- Cutting diameter hardwood (mm): 280
- Grapple opening (mm): 930
- Shear opening (mm): 450
- Own weight (basic – fully equipped) (kg): 580-970
- Recommended oil flow (l/min): 50-100
- Recommended oil flow for auxiliary functions (l/min): 35-50
- Recommended operating pressure (bar): 280
- Carrier vehicle operating weight (t): 7-15
Equipment:
- Including endlessly rotating tiltator
- Including collector grapple
- Including Autospeed function
- Including integrated Multigrip
We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available immediately.
Our warehouse features a large selection of various Westtech products, all available for immediate delivery!
Mr. Herden (Phone) is happy to assist you.
We are happy to provide you with a financing offer on request.
We are an official sales and service partner for Westtech.
We are an official sales and service partner for OilQuick.
We are an official sales and service partner for Holp.
We are an official sales and service partner for Magni telescopic handlers.
We are an official sales and service partner for DMS.
We are an official sales and service partner for Weber MT.
We are an official sales and service partner for Seppi M.
We are an official sales and service partner for JCB Construction Equipment.
We are an official sales and service partner for Mercedes-Benz.
We are an official sales and service partner for Iveco.
With 800 used commercial vehicles in stock, we are also one of Germany’s largest commercial vehicle dealers.
Iisdpoyltu Rofx Apysc
We supply the complete Westtech Woodcracker range for you!
Errors and prior sale excepted!
Internal ref. no.: 318367
= Further information =
New: No
Part suitable for: Application forestry
Please contact Marius Herden for further information.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Eberswalde
2.249 km
çekiçli parçalayıcı
HusmannHFG IV (HFG4)
Ara
Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2016, çalışma saatleri: 1.685 h, azami hız: 80 km/s, toplam ağırlık: 11.500 kg, toplam yükseklik: 2.500 mm, mobilite: stasyoner, makine/araç numarası: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016.
Operating hours: 1,685 h
All 60 flail tips were replaced recently, just a few operating hours ago. Some spare flails are still available and will be supplied with the machine.
All 8 V-belts were replaced recently as well.
Both NOx sensors and AdBlue sensors are new.
Important note: Tow bar is bent, so currently no road approval is possible.
Throughput: 60–100 m³/h, depending on material and feed equipment
Recommended max. log diameter: 200 mm
Machine No.: 11520
Max. revolutions per minute: 1,200 rpm
Operating voltage: 24 V
Operating pressure: 160 bar
Power: 205 kW
Permissible total weight: 11,500 kg
Iisdpfx Apjy Hi D Sjyoc
Manufacturer’s description:
FLAIL SHREDDER HFG VI
“These powerful Husmann machines with the basic designation ‘HFG (Husmann Forestry Equipment)’ achieve uniform, fine, and clean shredding thanks to special impact technology and the arrangement of the flails.
The shredded material is fed from a spacious receiving hopper equipped with a forged steel chain conveyor to the feed roller, and forwarded to the flail rotor. The pendulum-mounted feed roller runs on rack rails and is hydraulically driven by a heavy-duty reduction gearbox. The feed roller adapts automatically to the incoming material and can also be actuated and raised via remote control. The roller or passage opening of 460 mm ensures smooth and efficient material intake.
The sturdy rotor, made from high-quality steel (1,000 kg), is additionally reinforced and, thanks to advanced engineering, is break-proof even when foreign objects enter. Sixty free-swinging flails are mounted on eight hardened flail shafts. The quick-change system allows for bolting of carbide-tipped flail tips onto the flail holders. The large number of 50 mm wide flails and the rotor’s movement over a breaker bar towards the feed conveyor ensures optimal fragmentation of the material for composting. The load-dependent and steplessly adjustable feed speed of the moving floor and the feed roller further influences and enhances the end product’s quality.
The design of the rotor housing and discharge area allows windrowing up to 2.5 meters high.
The powerful 205 kW superstructure engine is easily accessible through large service doors, ensuring easy operation and maintenance. Clearly arranged controls and safety features, such as rotor overload protection and reverse function, are quality standards of our plant.
The mobile shredding plant features an 80 km/h running gear with air brakes and can optionally be equipped for stationary use or with a hook lift frame.
The HFG IV is a composting machine for organic and inorganic waste designed for fully mechanized feed."
If you have any further questions or need more information, please feel free to send us a message or call us.
Küçük ilan
Wuppertal-Cronenberg
2.571 km
Minibüs
CITROENJumper 9-Sitzer HDI 130 Standheizung *TÜV 2027*
Ara
Durum: ikinci el, kilometre: 206.000 km, güç: 96 kW (130,52 bg), yakıt türü: dizel, vites türü: mekanik, toplam ağırlık: 3.000 kg, ilk tescil: 04/2016, bir sonraki muayene (TÜV): 02/2027, emisyon sınıfı: Euro 6, renk: beyaz, koltuk sayısı: 9, Üretim yılı: 2015, toplam uzunluk: 4.963 mm, toplam genişlik: 2.050 mm, toplam yükseklik: 2.254 mm, Donanım: ABS, elektronik denge programı (ESP), klima, merkezi kilitleme, park ısıtıcısı, 2nd owner since 2018.
German minibus. Only 206,000 original kilometers.
TÜV valid until 02/2027.
In 2025, €2,000 was invested in this Citroen Jumper, including:
- Rear brakes NEW, parking brake partially renewed.
- Rear tires NEW (all-season tires).
- Front tires as new (all-season tires, DOT 17/2024).
- Last service in November 2024.
Auxiliary heater (works well).
Air conditioning.
9 seats.
Radio system.
Central locking with remote key.
ABS.
ESP.
Electric windows and mirrors.
Curb weight: "2025–2293 kg" as per the vehicle registration.
Gross vehicle weight: 3,000 kg.
Regular registration as "vehicle for passenger transport up to 8 seats / multipurpose vehicle".
Original Certificate of Conformity (COC) available.
Euro 6.
6-speed manual gearbox.
The Citroen runs powerfully and very well.
This offer is only valid for commercial customers, freelancers, farmers, foresters, and other legal entities. Sale to private individuals is strictly excluded. Subject to prior sale and possible errors at any time.
Net price: €10,500.
For export, we reserve the right to initially retain a deposit equal to the statutory 19% VAT until receiving the final export documents (the departure certificate or confirmation of arrival).
Ijdpfsv I Idbox Apysic
Küçük ilan
Wuppertal-Cronenberg
2.571 km
Pikap
MERCEDES-BENZ280 GE (GFG 460.2) lang Feuerwehr VRW *TÜV + H*
Ara
Durum: ikinci el, kilometre: 29.800 km, güç: 115 kW (156,36 bg), yakıt türü: benzin, vites türü: mekanik, ilk tescil: 07/1981, bir sonraki muayene (TÜV): 09/2027, renk: kırmızı, koltuk sayısı: 2, Donanım: her tahrikli, Original, early fire brigade G-Class from second ownership, which has never been used for civilian purposes so far.
TÜV and historic vehicle inspection (H-certificate according to §23 StVZO) successfully passed in September 2025.
Main inspection (HU) valid until 09/2027 (certified by DEKRA as having "no detected defects").
Year of manufacture: 1981 / Date of first registration: 07/1981.
Original mileage only 29,800 km. Used exclusively for fire service duties to date.
Advance Rescue Vehicle (VRW) with ZIEGLER superstructure and Knurz-Kirsch power generator rated at 5 kVA.
German garage vehicle with the original vehicle registration document (only 2 owners listed); registration maintained through autumn 2025.
The manufacturer recorded in the original vehicle documents is still GFG "Geländefahrzeug-Gesellschaft", then a joint venture of Daimler-Benz and Steyr-Daimler-Puch in Austria. This is one of the last vehicles built with this manufacturer indication before "Daimler-Benz" alone was specified as the manufacturer in vehicle documents shortly afterwards.
In 1991, a complete MATTER rollover cage was installed (properly recorded in the documents).
Iijdpfx Aexthdzopyjc
Comes with a small roof rack system for transporting long equipment.
The long 280 GE is the largest and most powerful model from the first G-Class production series that could be ordered ex works as a Mercedes G-Class.
The six-cylinder inline petrol engine M110 with 2717 ccm and 115 kW/156 hp starts and runs well.
4-speed manual transmission with differential locks.
Power steering.
A top speed (Vmax) of 155 km/h is registered.
A power take-off for operating the generator is also installed.
The vehicle was mainly used to transport a portable fire pump (TS) with suction hoses and accessories. Therefore, there are no seats in the rear, and instead there is a cargo area similar to a truck.
No additional seats are available beyond the two front seats.
According to the original documents, it is a "3-seater" and the registration type is "Other Motor Vehicle Fire Engine Advance Rescue Vehicle (VRW)".
Curb weight is given as 2360 kg.
The permitted gross vehicle weight (originally 2900 kg) was increased by entry in 1991 to now 3030 kg.
This gives the 280 GE a current payload of 670 kg.
Overall vehicle dimensions: Length 4395 mm / Width 1700 mm / Height 2150 mm.
Tyres: 205/80R16 in good condition.
Winter tyres with the snowflake symbol according to the current legal requirements are fitted (DOT 2018).
The G does not have a trailer coupling, but the necessary basic crossmember is installed. Information on retrofitting or trailer load cannot be provided, as the respective fields in the original registration document are marked "not applicable".
According to oral information from the last owner, the Mercedes is accident-free, but there is no written proof, so this statement is passed on to the buyer as reported.
The 280 GE was driven over a long distance on the motorway to us, which it completed without any issues.
A new battery has just been installed.
The off-road vehicle is immediately available here and is ready for new tasks.
This offer is only valid for businesses, self-employed professionals, public authorities, emergency services, agricultural and forestry operations, and similar independent entities. Sale to purely private end users is unfortunately not possible. Subject to prior sale and errors.
Küçük ilan
LEMGO
2.500 km
Damperli kamyon
PAVICMuldenkipper 55m³ Mulde mit Resonator
Ara
Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı hacmi: 55 m³, toplam uzunluk: 10.520 mm, toplam genişlik: 2.300 mm, toplam yükseklik: 3.990 mm, süspansiyon: hava, lastik boyutu: 385/65-22,5, renk: yeşil, Üretim yılı: 2026, Donanım: ABS, - EBS
Brand new from PAVIC.
Available immediately!
PAVIC 3-Axle 55 m³ Tipper Semi-Trailer with Lift Axle
Technical Specifications:
Coupling height: 1,250 mm
Length: approx. 10,522 mm
Width: approx. 2,300 mm
Height: approx. 2,380 mm
Technical axle group load capacity: 27,000 kg
Technical kingpin load capacity: 12,000 kg
Unladen weight: 8,520 kg
CHASSIS:
Heavy-duty and especially durable I-beam main chassis; manufactured from high-strength MC700 steel, welded by automated robotic welding process.
TIPPER BODY:
Volume: 55 m³
Floor plate: HARDOX450, thickness 5 mm
Side walls: HARDOX450, thickness 4 mm
Front wall: HARDOX450, thickness 4 mm
Rear door: HARDOX450, thickness 4 mm
A resonator/vibrator is installed underneath the body in the front area to dislodge material adhering inside the tipper body when tipping (see images).
TIPPER STRUCTURE:
Body design with hydraulic tailgate. Suitable for agriculture, forestry, recycling (scrap), and more.
HYDRAULIC CYLINDER (LIFT):
Heavy-duty hydraulic cylinder (Brand HYVA – C) single-circuit
AXLES:
3 × 9-ton SAF CD axles (BI9–22S) with disc brakes (SBS2220)
SUSPENSION:
Air suspension.
LIFT AXLE:
Automatic lift axle on the 1st axle.
TYRES:
6 × 385/65R22.5 (premium brand tyres)
RIMS:
6 × steel rims
BRAKING SYSTEM:
WABCO braking system
2-line brake system according to EC regulations
EBS 2S/2M
Pneumatic parking brake
1 × yellow air coupling
1 × red air coupling
1 × brake pressure valve
TPMS (tyre pressure monitoring system)
KINGPIN:
1 position, 2” (Brand: JOST or SAF)
LANDING LEGS:
Mechanical aluminium landing legs. Both legs operate independently via separate locking mechanisms (after coupling)
ELECTRICAL SYSTEM:
Voltage: 24 V
2 × 7-pin and 1 × 15-pin ISO connectors
EEC-compliant lighting as per standard:
SAE rear lights
Iedpoy N Tngefx Apyjic
Side marker lights
Brake warning lights
Reverse signal lamps
Lighting by ASPÖCK (EUROPOINT III):
2 combined tail/brake lights (red)
2 combined indicator lights (orange)
1 licence plate light
ACCESSORIES:
6 × spray guards
2 × mud flaps
2 × reflective tapes and reflective plates rear and sides
1 × rear underrun protection
2 × wheel chocks with brackets
1 × side aluminium guard
1 × toolbox
1 × work platform (painted and bolted)
1 × rollable tarpaulin (including mechanical support bows)
PAINTWORK:
Surfaces are smoothed and cleaned prior to painting.
Then: Sandblasted to SA 2.5 standard, then:
2 layers of primer
2 layers of acrylic top coat
RAL Colours:
Chassis (KTL): Black
Body: Green (similar to RAL 6016 yellow green)
For further inquiries, our sales team is at your service.
This is a non-binding offer. Subject to prior sale, errors, and changes.
General Information
Year of manufacture: 2026
Axle Configuration
Tyre size: 385/65-22.5
Brakes: Disc brakes
Suspension: Air suspension...
Küçük ilan
Berchtesgaden
2.030 km
Tarımsal makine
Mb-Trac1300 Turbo
Ara
Durum: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 1980, çalışma saatleri: 6.000 h, güç: 92 kW (125,09 bg), motor üreticisi: Mercedes, vites türü: mekanik, yakıt türü: dizel, azami hız: 40 km/s, ilk tescil: 11/1980, bir sonraki muayene (TÜV): 11/2026, renk: açık yeşil, makine/araç numarası: 44316100011477, Donanım: ek farlar, hidrolik, kabin, MB Trac satılıktır, son derece iyi durumda. Frenler, TÜV, yağlar hepsi yeni yapılmıştır. Mükemmel sürüş sağlar. Fiyat brüt 62.135 €. KDV ayrı gösterilemez.
Iedpfx Apsv U Nxteyjic
Küçük ilan
Burghaun
2.382 km
Westtech Woodcracker C300 / ALBACH / Sennebogen / YENİ
WesttechWoodcracker C300 / ALBACH / Sennebogen / NEU
Ara
Durum: ikinci el, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...).
Westtech Woodcracker C300 Felling Grapple / incl. collecting grapple / incl. ALBACH quick coupler / brand-new / in stock & immediately available
- Softwood cutting diameter (mm): 350
- Hardwood cutting diameter (mm): 300
- Grapple opening (mm): 1,430
- Shear opening (mm): 550
- Own weight (basic – full equipment) (kg): 750 – 1,080
- Recommended main circuit hydraulic flow rate (l/min): 70 – 150
- Recommended auxiliary circuit hydraulic flow rate (l/min): 45 – 60
- Recommended operating pressure (bar): 280
- Carrier vehicle service weight (t): 12 – 18
Equipment:
- incl. Autospeed function
- incl. collecting grapple
- incl. hydraulic switching between collecting grapple and cutting unit (Sennebogen single-circuit system)
- incl. ALBACH quick coupler
We have a large stock of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...), all immediately available.
Our warehouse carries a wide range of various Westtech products, all ready for immediate delivery!
Mr. Herden (phone ...) is happy to advise you.
Upon request, we will gladly provide you with a financing offer.
We are an official Westtech sales and service partner.
We are an official OilQuick sales and service partner.
We are an official Holp sales and service partner.
We are an official Magni telehandler sales and service partner.
We are an official DMS sales and service partner.
We are an official Gierking GMT sales and service partner.
We are an official Weber MT sales and service partner.
We are an official Seppi M. sales and service partner.
We are an official JCB construction equipment sales and service partner.
We are an official Mercedes-Benz sales and service partner.
We are an official Iveco sales and service partner.
With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany.
We offer you the complete Westtech Woodcracker product range!
Errors and prior sale excepted!
Iodpfjy E Et Tjx Apysic
= Further Information =
New: Yes
Part suitable for: Forestry applications
Please contact Marius Herden for further information.
Küçük ilan
Triptis
2.248 km
Damper 3 taraf
FlieglTLK 118
Ara
Durum: yeni, makine/araç numarası: e763c8c2bb3370bd2342236a4, boş ağırlık: 3 kg, azami yük ağırlığı: 8 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis Central Axle Tipping Trailer
Steel welded construction, continuous tipping shaft at the rear with 80 mm ball tip bearing
Gearbox support leg at the front
2 wheel chocks with holders
Steel underrun protection
Lockable storage compartment for loading ramps underneath the platform
Central axle trailer drawbar
Drawbar with certified 40 mm towing eye
Drawbar height adjustable via spindle, max. adjustment range 300 mm
Axles + Suspension
Euro-axles at our discretion, with tapered roller bearings and S-cam brakes
Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalisation (rocker equaliser)
Wheels and Tyres
235/75 R 17.5
manufacturer's choice
Steel rims, factory silver
Braking System
2-line compressed air braking system
Colour-coded line routing for easy servicing
Hand spindle parking brake
Integral air reservoir
Without ABS, but with mechanical ALB. Maximum permissible speed: 60 km/h
2 unmistakable coupling heads at the front with connecting lines to the tractor unit
Electrics
12 Volt, multi-chamber lights, no side yellow LED lighting, side reflectors
2 white position lights at the front
2 white/red marker lights at the rear
1 x 7-pin 12 Volt plug at the front, with connecting cable approx. 60 cm extended
Hydraulics
Three-way tipper, hydraulic multi-piston press with stroke limiter and safety cable
Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted to the truck.
Hydraulic connection with SVK connector NW 10/3, incl. connection hose
Operation hydraulically via PTO from the truck
Tipper Body
Robust tipper body with 4 mm steel sheet floor, steel drop side body, continuous side walls, fold-down and pivot-mounted with central locking at the bottom. Removable corner posts at the rear. Rear wall fold-down and pivot-mounted with central locking at the bottom.
Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom.
Platform width 2,420 mm
5 pairs of lashing eyes in the floor, each 5 t
Operating Instructions
The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable while complying with permissible axle, support, and kingpin loads. (Poor driving and trailing performance possible due to incorrect load distribution)
Country of Registration / Licence Plates
Country of registration: Germany
with Dekra approval and certificate for max. 60 km/h registration, towing vehicle agricultural or forestry tractor (country of registration Switzerland max. 40 km/h possible)
Prepared for single-line license plate holder
Without contour marking / reflective stripes according to ECE R 048
Paintwork
Iiodei Rizbspfx Apyjc
Frame hot-dip galvanised incl. passivation, 15-year warranty against rust-through
Side walls/body RAL 3002 Carmine Red
Note! If the body is galvanised, it will not be painted!
Note! Body interior only primed!
Wide tyres possible at extra cost. 355 / 60 R 18, then loading height approx. 980 mm
Attention: Archive images!
Küçük ilan
Waddeweitz
2.422 km
Kütük şerit testere
HartenbergerHBS 96 S Hydraulik
Ara
Durum: yeni, Üretim yılı: 2026, We offer this new Hartenberger HBS 96 S Hydraulic Bandsaw, year of manufacture 2026.
Manufacturer: Hartenberger
Model: HBS 96 S Hydraulic
Year: 2026
Condition: new
Category ID: 937
Type ID: 1756
Machine type: Block Bandsaw
BLOCK BANDSAW HBS 96 S with hydraulic system, including: cut thickness calculator – ISP 10, electric guide arm, electromagnetic water valve, hydraulic package.
Iijdpey Eq Snofx Apysc
Maximum performance for professional wood processing
More efficiency. More precision. More output.
The HBS 96 S is the ideal block bandsaw for anyone looking to increase their production while achieving the highest cutting quality. Designed for continuous professional use in sawmills or wood processing plants.
Enquire now for a non-binding offer and secure your quotation.
Why the HBS 96 S is the right choice:
✔ Powerful 11 kW motor – maintains consistent power even with large logs
✔ Fully hydraulic system – reduces manual work, increases productivity, saves time
✔ Electric saw head – precise control, height adjustment, and feed at the touch of a button
✔ Large cutting capacity – for log diameters up to 850 mm
✔ Robust construction – built for years of tough, daily operation
Result: Faster processes, less effort, and maximum yield from every log.
Technical Data:
E-motor: 11 kW
Voltage (three-phase): 400 V 50 Hz
Control voltage: 24 V 50 Hz
Saw head up/down: electric
Saw head feed: electric
Saw head passage: 680 mm
Saw blade length: 4005 mm
Saw blade width: 35 mm
Wood dimensions:
Max. log diameter: 850 mm
Standard length: 4800 mm
Hydraulic package:
Set of lateral supports
2x log clamps
1x log turner
1x driven leveling roller
Optional accessories:
+ Loading arm
+ Leveling roller without drive
+ Bed extension
+ Debarker head
+ Stationary control panel
Dimensions (L/W/H): 6000/2075/1900 mm
Weight: approx. 2400 kg
Ideal for businesses processing large-diameter roundwood!
Individually expandable and virtually unlimited in length!
Customize the machine to your requirements:
+ Bed extension for longer logs
+ Debarker for better cut quality and longer blade life
+ Stationary control panel for added convenience
Delivery time: ⏳ 12–14 weeks
Who is this saw suitable for?
Sawmills
Wood processing companies
Custom sawing businesses
Professional forestry operations
Hunting associations
Farmers, and more...
Increase your productivity now!
With the HBS 96 S block bandsaw you invest in a machine that pays for itself quickly – thanks to time savings, higher precision, and maximum performance with minimal maintenance and time expenditure!
Request a quotation now or secure expert advice.
Küçük ilan
Gais
2.082 km
Parçalayıcı
BruggerPX10
Ara
Durum: yeni, Üretim yılı: 2025, The Brugger PX10 wood chipper is powered via the tractor's PTO and is capable of processing logs with a diameter of up to 10 cm.
Iedew Dnwfspfx Apyeic
Its robust construction and high-quality materials ensure reliable performance. With hydraulic drive, it provides an efficient solution for wood processing in a variety of agricultural and forestry applications.
- Manual feed
- Diameter up to 10 cm
- Weight: 165 kg
- PTO speed: 540 rpm
- Tractor power requirement: 15-65 HP
----
Contact us for your tailored quote!
Price plus VAT
For companies with a VAT ID number, a net invoice will be provided.
Küçük ilan
Mosonmagyaróvár
1.751 km
Ahşap pelet üretim sistemi
MF TECNOCBT 000 003 00
Ara
Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2015, Paletleyici ve palet sarıcı
Kapasite 100 kg/saat
Kullanılmış, garanti yok
Bu makine Tata, Macaristan'da bulunmaktadır.
Pelet nedir?
Peletler, kurutulmuş talaş gibi tarımsal ve ormancılık atıklarının birkaç milimetre çapında küçük silindirler halinde sıkıştırılmasıyla elde edilen doğal bir biyoyakıttır. Hiçbir katkı maddesi ve kimyasal içermeyen kompakt bir ürün elde etmek mümkündür.
Peletlerin faydaları nelerdir?
En önemli avantajları arasında: çevresel sürdürülebilirlik (ormansızlaşmanın ve sera gazı emisyonlarının azaltılması); üretimi ucuz ve satın alması uygun fiyatlı.
Ayrıca, presleme işlemi nedeniyle peletlerin kalorifik değeri aynı hacim için ahşabın yaklaşık iki katıdır.
Iodpfx Apstw Szaoyoic
Küçük ilan
Palfau
1.911 km
Biçme Makinesi
EtesiaHVHPX
Ara
Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, güç: 14 kW (19,03 bg), yakıt türü: dizel, boş ağırlık: 654 kg, Üretim yılı: 2023, çalışma saatleri: 85 h, makine/araç numarası: H100D202801, Donanım: her tahrikli, Etesia HVHPX AWD with high-tip discharge in very good condition, only 85 hours of operation.
Iiodpfx Apowgwg Ijyoc
Unfortunately, the mower has become too small for the area we now have to maintain. The machine is in excellent, like-new condition. By using a locking wedge, the mower can be converted into a mulching mower; this accessory is included in the scope of delivery.
Küçük ilan
Rotterdam
2.777 km
Standart-SZM
Mercedes-BenzActros e-600
Ara
Durum: yeni, kilometre: 134 km, güç: 375 kW (509,86 bg), ilk tescil: 03/2026, yakıt türü: elektrikli, dingil konfigürasyonu: 4x2, dingil mesafesi: 4.000 mm, yakıt: elektrik, renk: beyaz, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 6, toplam uzunluk: 6.250 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.900 mm, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 11.500 kg, Üretim yılı: 2026, Donanım: Bluetooth, EBS (Elektronik Fren Sistemi), araç içi bilgisayar, elektrikli cam sistemi, hava yastığı, hidrolik direksiyon, hız sabitleyici, klima, merkezi kilitleme, tır çekici bağlantısı, yokuş kalkış desteği, çekiş kontrolü, = Additional Options and Equipment =
- Adaptive cruise control
- Alarm system
- Apple CarPlay
- Front work lights
- DAB radio
- Parking assistance
- Windscreen
- Enclosed cabin
- Heater
- Keyless Go
- Air conditioning
- Rain sensor
= Further Information =
General information
Number of doors: 2
Applications: Agriculture, cleaning, construction, demolition, land drainage, drainage, forestry, goods transport, fruit farming, land management, horticulture, internal logistics, livestock farming, mining, parking management, recycling, road construction and arable farming
Registration number: BD-122-F
Technical information
Number of cylinders: 6
Engine displacement: 12,777 cc
Maximum front axle load: 9,000 kg
Maximum rear axle load: 11,500 kg
Weights
Empty weight: 11,532 kg
Payload: 8,968 kg
Gross vehicle weight: 20,500 kg
Cab
Number of seats: 2
Maintenance
APK (roadworthiness test): valid until 03/2027
Iiedpsyx Dglofx Apyoc
Condition
General condition: very good
Technical condition: very good
Visual condition: very good
Financial information
Price: On request
Warranty
Factory warranty until: 03/05/2033
Küçük ilan
Ptuj
1.781 km
Ağaç öğütücü, ağaç parçalayıcı
Jensen Först Bandit Schliesing LaskiA540 DiXL V-2203 Spider Niveau
Ara
Durum: mükemmel (kullanılmış), Üretim yılı: 2014, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 561412962, kilometre: 817 km, güç: 35,89 kW (48,80 bg), ilk tescil: 12/2014, yakıt türü: dizel, renk: turuncu, işletme ağırlığı: 2.100 kg, yakıt: dizel, Donanım: her tahrikli, hidrolik, tır çekici bağlantısı, For Sale: A540 DiXL V-2203 Spider – Professional Chipper in Excellent Condition
Operating Hours: Only 817
First Registration: Ex-government vehicle from Germany, decommissioned since 2022
Condition: Very well maintained, fully functional
Maintenance: Professionally serviced by an authorized workshop
Last service at: 769 operating hours
Special Feature: No exhaust aftertreatment system – ideal for easy commissioning and maintenance
Technical Specifications:
Model: A540 DiXL V-2203 Spider
Drive Engine: Kubota V-2203 (Diesel)
Power: 35.9 kW / 48.8 HP
Ijdpewx Sdlsfx Apysic
Engine Type: 7 DF 5859
Max. Feed Opening (W x H): 210 x 190 mm
Chip Length: Infinitely variable up to 20 mm
Number of Blades: 2 (plus 2 spare blades included)
List Price (new): €74,000
Chassis & Mobility:
Track undercarriage with hydraulic adjustment
Height adjustment: up to 300 mm
Width adjustment: up to 420 mm
Level adjustment for uneven terrain
Diesel tank: 30 liters
Highly off-road capable and flexible in use
Conclusion:
This A540 DiXL is the ideal machine for professional use in forestry and landscaping. It impresses with its robustness, simple operation, low operating hours, and excellent technical condition. The last major service was carried out at 769 operating hours – the machine is therefore ready for immediate use.
No exhaust aftertreatment – making it particularly low-maintenance and easy to operate.
Viewing and test operation available by appointment.
Küçük ilan
Willebroek
2.751 km
Kütük kıskacı
PladdetWESTTECH C260 WOODCRACKER / BOOMSCHAAR
Ara
Durum: mükemmel (kullanılmış), Üretim yılı: 2026, Westtech CL260 Riskzone 50 m marka yeni ağaç makası – Pladdet CW10 hızlı değişim sistemi – Woodcracker –
Iisdsygugqepfx Apyjc
= Daha fazla bilgi =
Üretim yılı: 2026
Kullanım amacı: Ormancılık
Daha fazla bilgi için Miguel Cubas ile iletişime geçiniz.
= Şirket Bilgileri =
Anvers ve Brüksel arasında, A12 otoyolu üzerinde, Anvers limanına yakın konumdayız. Açılış saatleri: Pazartesi'den Cuma'ya, kesintisiz olarak 08:30 - 19:00 arası.
Küçük ilan
Falkenberg
2.086 km
Kütük tutma kancası
H&RHolzgreifer Rückezange
Ara
Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, azami yük ağırlığı: 3.000 kg, kaldırma gücü: 3.000 kg/m, Üretim yılı: 2025, Çeşitli ormancılık makineleri, tarım yükleyicileri, tekerlekli yükleyiciler, yükleyiciler ve diğer taşıyıcı araçlar için ahşap kepçeler (örneğin: H&R, JCB, Liebherr, Bobcat, Case, Kubota, Manitou, Schäffer, Zeppelin, vb.)
Tutucunun açılma genişliği yaklaşık 1,2 m'dir.
Iijdpfxevygigj Apyoc
Döner tabla, kütüklerin döndürülerek hassas bir şekilde alınıp yerleştirilmesini sağlar.
Eğim ayarı hidrolik olarak yapıldığından kolayca ayarlanabilmektedir.
Ayrıca Euro montaj, H&R standart montaj vb. gibi çeşitli montaj seçenekleri de mevcuttur.
Kişiye özel özelleştirme de mümkündür.
Ormancılık makineleri, lastikli yükleyiciler vb. için de diğer aksesuarlarımız mevcuttur.
İhtiyaçlarınıza özel bir teklif almak için lütfen eğitimli danışmanlarımızdan biriyle iletişime geçmekten çekinmeyin.
Sizleri aramızda görmekten mutluluk duyarız!
H&R GmbH'niz
Küçük ilan
Falkenberg
2.086 km
Testere ayırıcı odun ayırıcı testere ayırıcı
H&RSägespaltautomat Elektro RM480
Ara
Durum: yeni, Üretim yılı: 2025, Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 550 kg, kesme uzunluğu (maks.): 600 mm, Automatic sawing and splitting of wood with the RM480-E from H&R.
The H&R Log Splitter RM480-E is the ideal assistant for your firewood processing needs.
The new 2025 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and transporting of firewood.
Thanks to its innovative design and powerful hydraulic system, working with this log splitter is significantly simplified – perfect for professional forestry operations as well as demanding private users.
Unlike most competitors, the RM480 from H&R features FULLY hydraulic control of ALL functions, allowing you to get the job done faster and easier.
Product features – RM480-E
Performance: The log splitter is equipped with a powerful 13 HP electric motor. Alternatively, a 15 HP petrol engine version (RM 480 B) is available.
Log length and diameter: Logs up to 3 metres long can be safely handled on the stable standard table. The splitter can handle logs up to 48 cm in diameter and cut them into segments up to 60 cm in length.
Hydraulic system: The machine is equipped with a hydraulically lowerable saw bar. The hydraulic log clamp ensures secure fixation of the wood during the splitting process.
Hydraulic height adjustment of the splitting wedge is available. You may choose between the supplied 4-way or 6-way splitting wedge – for flexible splitting patterns and individual adaptation to your requirements.
Conveyor system: The new infeed belt, now 2.2 metres long, facilitates feeding the logs, while the side-swing unloading conveyor makes removal of the split wood effortless.
Mobile operation: The log splitter weighs just 750 kg (incl. trailer) and, thanks to its practical transport frame, can easily be moved manually.
User-friendly operation: All functions are conveniently controlled hydraulically, enabling extended operation times without fatigue.
Overview:
• Sawing, splitting, and transport in a single operation
Iodpou Dkufefx Apyjic
• All functions hydraulically operable
• Efficient, high-performance motor
• Splits logs up to 48 cm diameter and 60 cm length
• Processes logs up to 3 m in length (with optional table, even up to 6 m!)
Pricing:
Electric motor (10 HP) RM 480 E (net): €7,550.00
Petrol engine (15 HP) RM 480 B (net): €7,385.71
Additional options:
With the optional lift table or a chain conveyor, logs up to 6 metres can also be processed with ease.
Technical details:
Weight (incl. trailer): 750 kg
Freight cost: €300 (delivered in an iron crate, without hydraulic oil)
Final assembly time: approx. 4 hours
Max. log diameter: 48 cm
Max. split length: approx. 60 cm
Max. log length: 300 cm
Motor: Electric 13 HP
Hydraulic oil: 46
Hydraulic connections and control levers are already installed, so the machine is ready for operation within a very short time.
Benefit from the powerful and well-designed technology of the H&R Log Splitter RM 480. Order now and make firewood processing more efficient, safer, and more convenient!
Küçük ilan
Falkenberg
2.086 km
Testere ayırıcı odun ayırıcı testere ayırıcı
H&RSägespaltautomat Benzin RM480
Ara
Durum: yeni, Üretim yılı: 2025, Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 550 kg, yakıt: super 95, kesme uzunluğu (maks.): 600 mm, Automatically saw and split wood with the RM480-B from H&R.
The H&R RM480-B Firewood Processing Machine is the ideal assistant for your firewood preparation. The new 2026 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Its innovative design and powerful hydraulic system make operating this splitter much easier – ideal for professional forestry operations and ambitious DIY users.
Unlike competing products, the RM480 from H&R offers FULLY hydraulic operation for all functions, allowing you to work faster and more conveniently.
Product Features of RM480-B
- Performance: The splitter is equipped with a powerful 15 HP petrol engine (RM 480 B). Alternatively, a 13 HP electric motor (RM 480 E) is available.
Iisdpfxeu Dnrue Apyoc
- Log Length and Diameter: Logs up to 3 meters long can be safely placed on the robust standard table. The splitter handles logs up to 48 cm in diameter and cuts them into lengths up to 60 cm.
- Hydraulic System: The machine features a hydraulic saw bar; the hydraulic log clamp ensures a secure hold on the wood during splitting. The splitting wedge height adjustment is also hydraulic. You can choose between the supplied 4-way and 6-way splitting wedges – for flexible splitting patterns tailored to your needs.
- Conveyor System: The new 2.2 m long infeed conveyor simplifies log feeding, while the laterally swiveling outfeed conveyor makes transporting the split wood effortless.
- Mobility: With trailer, the machine weighs only 750 kg and can be easily moved by hand thanks to its practical transport frame.
- Simple Operation: All functions are conveniently hydraulically controlled, making long operating periods possible.
At a glance:
• Sawing, splitting, and conveying in one step
• All functions hydraulically operated
• Efficient, high-performance engine
• Handles splitting material up to 48 cm in diameter and 60 cm in length
• Logs up to 3 m long possible (up to 6 m with optional table!)
Price
Petrol engine (15 HP) RM 480 B (net) €7,385.71
Electric motor (13 HP) RM 480 E (net) €7,550.00
Additional Options
With the optional hydraulic lift table or a chain conveyor, logs up to 6 meters in length can be processed without issue.
Technical Data
Weight (incl. trailer): 750 kg
Freight costs: €300 (transported in steel frame, without hydraulic oil)
Final assembly time: approx. 4 hours
Max. splitting diameter: 48 cm
Max. splitting length: approx. 60 cm
Max. log length: 300 cm
Engine: Petrol, 15 HP
Displacement: 420 cm³
Engine oil: 10W30
Hydraulic oil: 46
Hydraulic couplings and control levers are pre-installed, enabling the machine to be operational in no time.
Benefit from the powerful and well-designed technology of the H&R RM 480 Firewood Processor. Order today and make firewood processing more efficient, safer, and more convenient!
Küçük ilan
Gais
2.082 km
Brugger HX14 parçalayıcı, yola uygun
Brugger HX14 Häcksler
Ara
Durum: yeni, Brugger HX14 parçalayıcı – kompakt, güçlü ve her yerde kullanıma hazır!
Brugger HX14 parçalayıcı maksimum performansı etkileyici mobiliteyle birleştirir. Güçlü 25 HP benzinli motoru ve çapı 14 cm'ye kadar olan dalları ve gövdeleri zahmetsizce parçalama yeteneği ile zorlu bahçe ve peyzaj projeleri için mükemmel seçimdir.
Kompakt tasarımı ve yola uygunluğu sayesinde HX14, ister bahçede, ister şantiyede veya uzak konumlarda olsun her yere hızlı ve kolay bir şekilde taşınabilir. Verimlilik ve esneklik tek cihazda!
Bir bakışta avantajlarınız:
• Güçlü: Güçlü doğrama için 25 HP benzinli motor
Iodpfx Asvpfutjpyjic
• Büyük kapasite: Çapı 14 cm'ye kadar olan dalları ve gövdeleri tutar
• Kompakt tasarım: Kolay kullanım ve yerden tasarruf sağlayan taşıma için
• Mobil ve esnek: Römork ve yol onayı ile her yerde kullanıma hazır
• Profesyoneller ve zorlu projeler için idealdir: Günlük kullanım için güvenilir ve dayanıklıdır
Brugger HX14 – maksimum mobilite ve verimlilik için güçlü ortağınız!
Dqqhzd
Teknik veriler:
• Boyutlar – 274 x 125 x 175 cm (u x g x y)
• Ağırlık - 383kg
• Bıçak - 2,36 cm genişliğinde
• Maksimum çap - 14 cm
• İşleme/saat – 10-14 m³/saat
• Tamburdaki besleme hunisi - 36 x 14 cm
Size özel teklif için bizimle iletişime geçin!
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Wiedemar
2.264 km
çim biçme makinesi
SauerburgerHangschlepper (alle Modelle)
Ara
Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, yakıt türü: dizel, yakıt: dizel, şoför kabini: gündüz kabini, emisyon sınıfı: Euro 6, Üretim yılı: 2026, Donanım: ABS, diferansiyel kilidi, her tahrikli, hidrolik, immobilizer sistemi, klima, tır çekici bağlantısı, Are you looking for robust and high-performance equipment for heavy-duty applications?
We offer you new Sauerburger machines – renowned for quality, durability, and maximum versatility!
Available machines & areas of application:
✔ Tool carriers for slopes & steep terrain
✔ Specialised machines for landscape maintenance & forestry
✔ Equipment for extreme terrain requirements
✔ Municipal technology & customised solutions
Your advantages:
Tailored configuration for your specific application
Ideal for municipalities, forestry operations & contractors
High stability & safety even in challenging terrain
Service, spare parts & consultation from a single source
Whether steep slopes, hard-to-reach terrain, or demanding maintenance tasks – with Sauerburger tool carriers, you are perfectly equipped!
Contact us now for a non-binding enquiry!
We are happy to advise you and find the optimal solution for your requirements.
Henne Nutzfahrzeuge GmbH
Iiedpfsyx A U Ijx Apyec
Authorised Mercedes-Benz Unimog General Agent
JCB Sales and Service Partner
Hans-Grade-Straße 2
04509 Wiedemar
Marlon Schütz
Sales Municipal Special Equipment
Küçük ilan
Barendrecht
2.765 km
Damperli kamyon
AJK42 ton | Elektrisch bediende Wattsnew geisoleer...
Ara
Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 12/2024, toplam uzunluk: 78.000 mm, toplam genişlik: 25.500 mm, toplam yükseklik: 35.800 mm, süspansiyon: hava, lastik boyutu: 365/65R22,5, dingil mesafesi: 6.040 mm, renk: beyaz, Üretim yılı: 2024, Genel Bilgiler
Kullanım Amaçları: İnşaat, Yıkım, Hafriyat işleri, Ormancılık, Bahçecilik, İç lojistik, Madencilik ve Otopark yönetimi
Plaka: OV-18-FK
Aks Konfigürasyonu
Lastik Ölçüsü: 365/65R22.5
Aks Markası: Goodyear
Frenler: Kampanalı frenler
Süspansiyon: Havalı süspansiyon
Arka aks 1: LM jantlar; Kaldırılabilir aks; Maks. aks yükü: 10.000 kg
Arka aks 2: LM jantlar; Maks. aks yükü: 10.000 kg
Arka aks 3: LM jantlar; Maks. aks yükü: 10.000 kg
Ağırlıklar
Boş ağırlık: 7.420 kg
Yükleme kapasitesi: 34.580 kg
Azami toplam ağırlık: 42.000 kg
Fonksiyonel
Dumper: Arkadan
Durum
Teknik durumu: Çok iyi
Görsel durumu: Çok iyi
Ürün Güvenliği
Üretici: AJK Nederland Borkel en Schaft, Hollanda
Diğer Bilgiler
Daha fazla bilgi için Maarten van Marion ile iletişime geçiniz.
= Firma Bilgileri =
Iisdsx Np Nyjpfx Apyec
Tüm ürün yelpazemizi burada bulabilirsiniz:
Küçük ilan
Gais
2.082 km
Kuyruk mili - odun parçalayıcı, odun öğütücü
BruggerPX130
Ara
Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, Brugger PX130 odun parçalayıcı, bir traktörün kuyruk mili üzerinden çalıştırılır ve çapı 13 cm'ye kadar olan kütükleri doğrayabilir.
Sağlam tasarım ve yüksek kaliteli malzemeler güvenilir performans sağlar.
Teknik veriler:
- Hidrolik besleme
- 13 cm'ye kadar çap
- Ağırlık 420kg
- PTO hızı: 540 rpm
- Beygir gücü traktör: 30-70 hp
Hidrolik besleme ile çeşitli tarım ve ormancılık uygulamalarında ahşap işleme için verimli bir çözümdür.
Ijdpfxorblwde Apyjic
Size özel teklif için bizimle iletişime geçin!
Küçük ilan
Gais
2.082 km
Parçalayıcı
BruggerPX180 Pro
Ara
Durum: yeni, Brugger PX180 ahşap parçalayıcı, profesyonel kullanım için güçlü bir parçalayıcıdır.
Çapı 18 cm'ye kadar olan etkileyici kapasitesi ile kütüklerin verimli bir şekilde parçalanmasını sağlar.
Hidrolik besleme, aşırı yüklenme olmadan düzgün malzeme beslemesi sağlamak için bir "NO Stress" sistemi ile donatılmıştır.
Iiedorblyrjpfx Apyoc
Teknik veriler:
- NO-Stress otomatik sistemli hidrolik besleyici
- 18 cm'ye kadar çap
- Ağırlık 648 kg
- PTO hızı: 540 rpm
- Üç nokta bağlantısı: KAT 1, 2, 3
- Gerekli beygir gücü traktör: min. 50hp
Sağlam tasarım ve yüksek kaliteli malzemeler güvenilir performans ve uzun hizmet ömrünü garanti eder.
Size özel teklif için bizimle iletişime geçin!
Sizin için aramayı kolaylaştırıyoruz: "forestry mulcher"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay






















































































































































































































































































































