Kullanılmış Dana Te10 satın al (5.833)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Vilnius
1.903 km
Standart çekici ünitesi
MERCEDES-BENZActros 5 1845 BigSpace MirrorCam
Çağrı
Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, kilometre: 257.039 km, güç: 331 kW (450,03 bg), ilk tescil: 05/2024, yakıt türü: dizel, toplam ağırlık: 8.269 kg, dingil konfigürasyonu: 4x2, dingil mesafesi: 385 mm, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, Üretim yılı: 2023, silindir sayısı: 6, silindir hacmi: 12.800 cm³, direksiyon simidi pozisyonu: sol, Donanım: hidrolik direksiyon, tam servis geçmişi, Features
Predictive Powertrain Control (PPC). Cruise control.
L-cab BigSpace, 2.50 m, flat floor.
AGM batteries, 2 x 12 V/220 Ah, maintenance-free.
Engine OM471, inline six-cylinder, 12.8 l, 330 kW (449 hp), 2200 Nm. EURO 6.
Automatic transmission. Mercedes PowerShift 3.
Transmission G211-12/14.93-1.0.
High-performance engine brake.
Advanced Emergency Braking System (AEBS)
Rjdpfx Ahsy Uv Elj Ueu
Driver attention assist
Driver comfort
Automatic climate control.
Suspended comfort driver seat.
Dual armrests, co-driver seat.
Luxury top bunk, narrow.
Luxury lower bunk.
Additional cabin hot water heater.
Pull-out refrigerator under lower bunk.
Technical specifications
Continental VDO 4.1 Smart Tachograph Version 2 – mandatory from 21.08.2023
Electronic Stability Program (ESP). Lane Keeping Assist. Active Brake Assist 5.
Front axle tires 315/70 R22.5.
Rear axle tires 315/70 R22.5.
Drive axle ratio 2.41
Fifth wheel ex works, standard, Jost JSK 37C. Height = 150 mm.
Wheelbase 3850 mm, axle arrangement 4x2.
Tank 790 l + 120 l AdBlue, left side, 735 x 700 x 2170 mm, aluminum, step. Lockable.
Second tank, 430 l, right side, 735 x 700 x 1000 mm, aluminum. Lockable.
Speed limiter, 80 km/h.
Technology
Truck Data Center 7.
Fleet Management System (FMS) interface.
Exterior
LED main headlights.
Fog lights, halogen. LED daytime running lights.
MirrorCam
Küçük ilan
Sofia
1.085 km
Oluklu hat
LUMCorrugated line 5 ply
Çağrı
Koşul: ikinci el, Üretim yılı: 2024, Fonksiyonellik: tamamen fonksiyonel, Corrugated Line 5-ply – Fully Refurbished in 2024, 1650 mm Working Width. Equipped with Steam Matic Boiler (Steam Output: 2,500 kg/h, Max Pressure: 19 bar). Maximum Production Speed: 70 m/min.
Technical Data:
1. Total Line Length: 55 m
2. Total Installed Power: 150 kW
3. Frame with Shaft
Rsdpfow R Sknox Ah Uou
4. Corrugating Section: Corrugating roller diameter, electric speed adjustment motor included.
5. Double Cylinder Gluing Section: With dual internal glue applicators; the descending mechanism delivers the paper to the feed rollers efficiently.
Line Comprises the Following Units:
- Hydraulic Shaftless Mill Roll Stands, Spindle Diameter: 240 mm, Heavy-duty Hyperbolic Rocker Arms, Expanding Chucks, Multi-point Braking, Hydraulic Lifting and Automatic Lateral Movement.
- Top Paper and Core Paper Preheater Cylinders (360° Area Preheating)
- Single Facer Unit
- Double Facer Unit
- Rotary Blade Scorer
- NC Spiral Knife Slitter
- Industrial Gluing System
- Pneumatic System
- Steam System: 2,500 kg/h Output, Max Pressure 19 bar, Operating Pressure 12 bar.
Paper Specifications:
- Top Paper: 100–180 g/m², Ring Crush Value (N·m/g) ≥ 8 (Moisture Content 8–10%)
- Core Paper: 80–160 g/m², Ring Crush Value (N·m/g) ≥ 5.5 (Moisture Content 8–10%)
- Inner Liner: 90–160 g/m², Ring Crush Value (N·m/g) ≥ 6 (Moisture Content 8–10%)
Küçük ilan
Avusturya
1.826 km
Mandrel boru bükme makinesi
PEDRAZZOLIPEDRAZZOLI UNI 42 CD
Çağrı
Koşul: ikinci el, Üretim yılı: 1988, Condition: Used
Year of manufacture: 1988
Stock number: 090151
Delivery time: immediate, subject to prior sale
Country of origin: Italy
Price: €12,800
In stock: 1
Max. diameter (steel tube): 42 mm
Length: 4665 mm
Width: 800 mm
Height: 1160 mm
Weight: 1470 kg
Steel tube: 42 x 2.5 mm
Square tube: 40 x 1.2 mm
Rectangular tube (horizontal): 30 x 40 x 1.7 mm
Rectangular tube (vertical): 40 x 30 x 1.3 mm
Max. bending radius: 255 mm
Min. bending radius: 22 mm
Max. bending angle: 180°
Speed: 90°/s
Motor: 5.5 kW
Hydraulic tank capacity: 120 l
Capacity data based on 400 N/mm²
Maximum bending radius with tube guiding rollers: 255 mm
Maximum bending radius with tube guiding slides: 175 mm
Minimum bending angle: 4°
Max. usable length without positioning device: 3900 mm
Max. usable length with positioning device: 3370 mm
Mandrel extraction stroke adjustable from 8 mm
Opening/closing stroke of counter-pressure jaws: 0-45 mm
Opening/closing stroke of rollers or slides: 12-22-42 mm
Operating manual in German
Machine does not comply with AMVO or UVV
Without tooling
BUYING USED MACHINERY IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE
We offer you maximum security and full transparency.
• HONEST INSIGHTS: Detailed photos & functional videos of the current condition
• LIVE CHECK ON SITE: Live testing at our facility
• DIGITAL DEMONSTRATION: Individual live demonstration via video call
• RISK-FREE PURCHASE: 14-day return policy
Rjdpfx Ahexx A Ekj Usu
Details:

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Avusturya
1.826 km
Abkant pres
HESSE by DURMAPBF 1030
Çağrı
Koşul: ikinci el, Üretim yılı: 2023, Condition: Used
Year of manufacture: 2023
Stock number: 8285
Delivery time: Prompt, subject to prior sale
Country of origin: Turkey
Price: €33,900
In stock: 1
Press force: 30 t
Bending length: 1050 mm
Axes: 3 (Y1, Y2, X)
Stroke: 160 mm
Distance between frames: 850 mm
Side frame throat depth: 250 mm
Installation height: 390 mm
Drive system: Hydraulic
Working speed Y-axis: 10 mm/s
Return speed Y-axis: 130 mm/s
Backgauge X-axis travel: 495 mm
Backgauge X-axis speed: 250 mm/s
Table height: 835 mm
Table width: 104 mm
Oil tank: 75 l
Motor power: 7.5 kW
Length: 2,470 mm
Width: 1,250 mm
Height: 2,245 mm
Weight: 3,250 kg
Demo machine / as-new condition
Net price (new price €41,200.00)
3 axes (Y1, Y2, and X axis)
CNC CONTROL DT-10 incl. PC software
- 10" 2D graphics display
- Intuitive touch-screen operation (easy drawing of bending contours with your finger)
- Direct programming of the bending angle
- User-friendly dialogue programming
- Graphical simulation of the bending process
- Automatic calculation of the blank length for sheet cutting
- Graphical product and tool memory
Rodpfxswirnfs Ah Usu
- Correction capability
- Manual, semi-automatic and fully automatic operation modes
- Tonnage calculation/programming via CNC
- Internal data storage
- USB ports for backup and program transfer
Motorised backgauge with linear guide and ball screw spindle
Intermediates for upper tool clamping
Sheet support arms
Side safety guards
Equipment in accordance with CE regulations
Operating manual in GERMAN or ENGLISH
OPTION:
DBend, 3D CAD/CAM import and simulation software (step, iges and dxf file import)
€2,110
USED MACHINERY PURCHASE IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE
We offer you maximum security and full transparency.
• HONEST INSIGHT Detail photos & functional videos of the actual condition
• ON-SITE LIVE CHECK Live test at our facility
• DIGITAL DEMO Individual live demonstration via video call
• RISK-FREE PURCHASE 14-day return policy
Details:
Küçük ilan
Oradea
1.407 km
Reach truck
JungheinrichETV 214 E GE 115 – 455 DZ
Çağrı
Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 91128554, Üretim yılı: 2018, çalışma saatleri: 1.439 h, yük kapasitesi: 1.400 kg, kaldırma yüksekliği: 4.550 mm, yakıt türü: elektrikli, direk tipi: triplex, güç: 6 kW (8,16 bg), akü üreticisi: Jungheinrich, akü modeli: 4EPZS 620, pil kapasitesi: 620 Ah, kalan pil kapasitesi: 95 yüzde, batarya voltajı: 48 V, batarya ağırlığı: 935 kg, çatalların uzunluğu: 1.150 mm, lastik durumu: 65 yüzde, Ön lastik tipi: süper elastik lastikler (siyah), arka lastik türü: süper elastik lastikler (siyah), boş ağırlık: 3.040 kg, toplam yükseklik: 2.200 mm, toplam uzunluk: 2.500 mm, toplam genişlik: 1.270 mm, renk: sarı, Donanım: kabin, merkezi yağlama sistemi, palet çatalları, yan kaydırma, Jungheinrich ETV 214 E GE 115 – 455 DZ, utilaj reach truck second-hand; An fabricație: 2018; Nr. serie: 91128554; Ore de funcționare: doar 1.439; Tip motor: electric, 6,0 kW; Capacitate: 1.400 kg; Catarg: triplex; Înălțime de ridicare: 4.550 mm; Lungime furci: 1.150 mm; Greutate proprie fără baterie: 2.105 kg; Anvelope față: pline (cushion), dimensiune 1x BA; Stare anvelope spate: 65%; Transmisie: curent trifazic; Tip baterie: 2018, 48V 4EPZS 620, capacitate C5: 620 Ah; Greutate baterie: 935 kg; cu 24 de celule și volum acid: 153 litri; Greutate totală cu baterie: 3.040 kg; Tip comandă: joystick standard.
Rjdpfx Aoyn In Rsh Usu
Dimensiuni: Lungime totală: 2.500 mm x lățime totală: 1.270 mm x înălțime închisă: 2.200 mm; cabină de protecție pentru operator; ridicare completă liberă (full free lift); încărcător baterie model SLT150, an 2018, cu nr. serie: B6835278.
Stare tehnică: foarte bună, verificare service efectuată la data de 25 februarie 2026; Stare vizuală: foarte bună.
Reach truck-ul are 3 roți noi montate.
Preț: 11.700 Euro + TVA, negociabil, FCA Oradea/România.
Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă.
We speak English./ Wir sprechen Deutsch./ Beszélünk magyarul./ Nous parlons français./ Vorbim romana.
Küçük ilan
Türkiye
262 km
Boring Machine
SkodaSkoda W200H
Çağrı
Koşul: mükemmel (kullanılmış), Üretim yılı: 1992, Fonksiyonellik: tamamen fonksiyonel, X ekseni hareket mesafesi: 8.000 mm, Y ekseni hareket mesafesi: 5.400 mm, Z ekseni hareket mesafesi: 900 mm, besleme uzunluğu W ekseni: 900 mm, iş mili çapı: 200 mm, W ekseni hareket mesafesi: 2.000 mm, masa yükü: 40.000 kg, masa uzunluğu: 2.500 mm, masa genişliği: 2.000 mm, son revizyon yılı: 2022, güç: 140 kW (190,35 bg), Donanım: devir hızı sonsuz değişken, Biz [bu] [çok iyi durumda] [Skoda] [Skoda W200H] [delik işleme makinesi]ni, [1992] üretim yılı ile sunuyoruz.
Redpfx Ahoymnv Ss Uju
Translated and filled using your data:
1992 üretim yılına sahip çok iyi durumda Skoda Skoda W200H delik işleme makinesini sunuyoruz.
Üretici: Skoda
Model: Skoda W200H
İmalat yılı: 1992 yıl
Durum: çok iyi
Kategori kimliği: 1601
Tip kimliği: 1276
Tip: Delik işleme makinesi
Herhangi bir sorunuz varsa veya daha fazla bilgiye ihtiyacınız olursa, bize mesaj gönderebilir veya bizi arayabilirsiniz.
Küçük ilan
Vilnius
1.903 km
Standart çekici ünitesi
VOLVOFH 500 Globetrotter XL I-ParkCool ACC
Çağrı
Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, kilometre: 215.364 km, güç: 368 kW (500,34 bg), ilk tescil: 05/2024, yakıt türü: dizel, dingil konfigürasyonu: 4x2, dingil mesafesi: 380 mm, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, Üretim yılı: 2024, silindir sayısı: 6, silindir hacmi: 12.809 cm³, direksiyon simidi pozisyonu: sol, Donanım: hidrolik direksiyon, tam servis geçmişi, Features
Cab Type: Globetrotter XL
Volvo FH 500
Eco-Torque Software – Enhanced Economy Mode. Fuel-efficient cruise control for I-Save.
Volvo Engine Brake – Retarder D13K-375kW/D16-500kW
Automated 12-speed I-Shift transmission – Gross vehicle weight rating 60 tons
New D13K500 diesel engine, 500 hp, 2500 Nm, SCR and EGR
Batteries: 2 x 210 Ah – AGM Absorbent Glass Mat type
Euro VI SCR, EGR, and particulate filter
Rear view camera: None
Driver Comfort
Seating: standard
Beds: standard
I-ParkCool Advanced cab parking cooler with 150V DC compressor
Auxiliary heater (Webasto): 1.8 kW air-to-air
Redpfx Ahjy Uc Hvs Ueu
33-liter fridge/freezer under bed with partitions
Electronically controlled air conditioning with sun sensor
Driver alert support: NO
Side collision avoidance system, passenger and driver side
Interior sun visor – driver side
Technical Specifications
Wheelbase: 3800 mm
Fifth wheel height: 160 mm support height
Front axle load: 7.5 tons
Retarder: NO
ACC – Adaptive Cruise Control: YES
I-See Predictive Cruise Control with lower operation settings – map-based topography data
ADR: None
Fully air-conditioned cab: None
Drive axle ratio: 2.31:1
Continental VDO 4.1 Smart Tachograph version 2 – legal requirement as of 21.08.2023
Forward collision warning with AEBS emergency braking system
Fuel tank capacity (left, right): 450-liter fuel tank – right side, 650-liter fuel tank – left side
AdBlue tank capacity: 90 liters for 710 mm diameter tanks
Additional roof windows: None
Tyre size: Front 385/65R22.5, drive axles 315/70R22.5
Technology
Infotainment system
GSM/GPRS/4G modem, LTE & Wi-Fi
Exterior
Mirror cameras: NO
Headlights: Halogen H7
Roof window: none
Side skirts: None
Deflector: Roof air deflector
Volvo. Cab exterior specification: Base spec – satin-finish emblems, grey radiator grille, entrance steps, bumper and spoiler, mirror housings and sun visor
Küçük ilan
Kozy
1.756 km
Mini vinç XM1200 - kaldırma kapasitesi 1500 KG
BefardXM1200
Çağrı
Koşul: yeni, yakıt türü: benzin, toplam ağırlık: 1.300 kg, işletme ağırlığı: 1.200 kg, azami yük ağırlığı: 1.500 kg, kaldırma yüksekliği: 1.000 mm, Üretim yılı: 2026, Donanım: hidrolik, Befard XM1200 – NEW
TECHNICAL DATA:
• 1200 kg lifting capacity – Pick & Carry operation
• 1500 kg lifting capacity – with optional equipment
• 3 hydraulic boom extensions
• Boom opening angle 65°
• Vertical reach of 10 m – with optional equipment
• Wear-resistant tracks
• Extendable chassis (780–1250 mm)
• Radio remote control
• Column rotation 50°
• Articulated joint (knuckle boom)
• Optional use of 500 kg or 990 kg winch
• Fixed and magnetic LED lighting
AVAILABLE DRIVE VERSIONS:
3-in-1 – petrol engine, electric motor (230 V, 400 V, 110 V selectable), and lithium-ion batteries
Combustion engine – operation with combustion engine only
Combustion-electric – operation with combustion engine and electric motor (230 V, 400 V, or 110 V)
OPTIONAL EQUIPMENT:
• Winch (500 kg or 990 kg)
• Manual boom extension – increases reach by 1 m – 2 manual boom extensions available for the crane
Rodpfx Aewkgq Rjh Uju
• Search hook – 6-way adjustable, increases reach by 0.5 m
• Hydraulic dozer blade – additional blade at the front of the machine, manually extendable and hydraulically lowerable.
Additional blade options:
• Forks
• Towing hitch: increases stationary lifting capacity to 1500 kg.
Increase of stationary lifting capacity to 1500 kg and option for using an additional boom
• Remote control with display
• Counterweight platform – platform for adding counterweights (not required for standard operation)
• Load area extension – removable extension of the load area by approx. 500 mm
• Suction cup with hydraulic head – suction cup with hydraulic head, controllable via remote. The suction cup can be removed, and a hook can be mounted. The head is attached at the end of the hydraulic extension.
• Holder for XP glass lifter at platform – bracket for XP glass lifter on the platform.
• RAL colour – choose the machine colour from the RAL palette.
• Tow hook – possibility to use a tow hook for the crane’s transport platform.
• Ramps – 2.5 m long aluminium ramps.
The Befard XM1200 is a modern mini pick & carry crane designed for maximum functionality and mobility in challenging working environments. Thanks to its compact dimensions, it easily passes through a standard doorway, and the extendable tracks up to 1250 mm provide stability and safety during crane operation. This versatile model offers an impressive reach of up to 10 metres – ideal for work at second-floor heights. The XM1200 mini crane can handle loads up to 1200 kg. With outriggers, its maximum lifting capacity increases to 1500 kg. An optional winch further expands application possibilities, making the tracked mini crane XM1200 the ideal solution for installation, service, industrial, and construction tasks.
Test the unit before purchase.
* The offer price refers to the base version with petrol engine.
* Product available on order.
* Net price.
Küçük ilan
Siedlce
1.776 km
Yatay tank üzeri vidalı kompresör
CORMAKLUFT 400 3,0kW 230V + butla 150L
Çağrı
Koşul: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, Screw compressors from the Polish brand CORMAK are a guarantee of quality and reliability. Our extensive experience in compressor sales has allowed us to develop models distinguished by an excellent price-to-performance ratio. The presented model is ideal for small workshops or small production businesses. It is characterized by high efficiency (380 l/min) relative to its compact dimensions, enabling simultaneous operation of several devices. The very low noise level (60 dB) ensures comfortable work, even when sharing the same room as the machine.
Are you looking for an efficient and reliable compressor suitable for smaller workshops, service points, or hobby applications, and specifically need single-phase power supply? The CORMAK LUFT 400 screw compressor is the perfect solution. With a 3.0 kW motor and an impressive real output of up to 400 l/min, it guarantees a steady supply of compressed air, essential for the effective operation of impact wrenches, blow guns, or spray-painting tools.
The LUFT 400 stands out with its reliable and robust direct-drive power transmission system, which eliminates vibrations and removes the need for belt adjustments. This proven solution ensures stable operation and long service life, delivering direct power transfer from the motor to the screw module.
The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the device’s operating parameters is ensured by an intuitive electronic MAM series control panel, giving you access to key compressor information and increasing flexibility and process control.
Permanent Magnet Motors (PM Motors) offer innovative drive solutions in electric powertrains, offering several significant advantages over traditional induction motors.
The inverter (also known as a frequency converter) is an advanced electronic device that revolutionizes the operation of screw compressors. Its use allows for smooth adjustment of the compressor motor speed according to current compressed air demand.
High-class CORMAK screw compressors, such as the LUFT 400 model, rely on advanced technological screw modules that determine their efficiency and reliability. By focusing on proven solutions and innovation, Cormak ensures each module is perfected down to the smallest detail to meet the demands of even the most intensive use.
In CORMAK screw compressors like the LUFT 400, a key component for reliability and work optimization is the advanced MAM series control panel. Designed for efficient management of the compressed air system, this controller enables real-time monitoring and rapid response to all working parameters.
Rsdpfx Ahoza Al Us Usu
Technical data:
Motor power: 3.0 kW / 4 HP
Voltage: 230V/50Hz
Performance 0-6 bar: average 400 L/min
Performance at 6 bar: 390 L/min
Performance at 8 bar: 380 L/min
Performance at 10 bar: 380 L/min
Outlet connection diameter (G): 1/2"
Dimensions: 1130 x 520 x 1300 mm
Weight: 170 kg
Küçük ilan
Iszkaszentgyörgy
1.652 km
Yapı malzemesi test cihazı - Derin dondurucu hücresi
MATESTC313N
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2022, The Matest C313N is a laboratory freeze-thaw and climate chamber primarily used for construction material testing – especially for investigating the behavior of concrete, cement, aggregates, and other materials under various temperature and humidity conditions.
Main applications:
Rodpfxsy R D D Uj Ah Ueu
- Simulation of freeze-thaw cycles (e.g., testing concrete specimens for resistance to thermal cycling).
- Durability testing of construction materials according to standards (e.g., EN 1367-1).
- Performance of accelerated aging and climate tests under diverse environmental conditions.
Features:
✔ Control of two parameters: temperature and humidity.
✔ Temperature range: approx. -30 °C to +70 °C.
✔ Humidity range: 20–95% (±1% accuracy within the relevant temperature range).
✔ Programmable cycles: up to 50 programs and 100 segments adjustable.
✔ 5" color display: real-time clock and optional data recording via PC connection.
✔ Interior and exterior housing made of stainless steel: for long service life.
Fields of application:
- Freeze-thaw resistance testing of concrete and construction materials: demonstrates how the material cracks or gets damaged due to thermal cycles.
- Quality control of construction materials under laboratory conditions.
- Environmental and climate testing where precise control of heat and humidity is required.
Küçük ilan
Obertraubling
2.145 km
Yüksek ve uzun kasa van
FIATDucato Maxi L4H2 Klima Automatik Kamera
Çağrı
Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, kilometre: 28.612 km, güç: 132 kW (179,47 bg), yakıt türü: dizel, vites türü: otomatik, toplam ağırlık: 3.500 kg, boş ağırlık: 2.255 kg, azami yük ağırlığı: 1.245 kg, ilk tescil: 11/2024, bir sonraki muayene (TÜV): 05/2028, yükleme alanı uzunluğu: 4.070 mm, yükleme alanı genişliği: 1.870 mm, yükleme alanı yüksekliği: 1.932 mm, emisyon sınıfı: Euro 6, renk: beyaz, koltuk sayısı: 3, önceki sahip sayısı: 1, Üretim yılı: 2024, Donanım: ABS, araba tescili, araç içi bilgisayar, dört mevsim lastikler, ek farlar, elektronik denge programı (ESP), hava yastığı, hidrolik direksiyon, hız sabitleyici, ikinci el araç garantisi, immobilizer sistemi, is filtrasyon filtresi, kamyon kaydı, klima, merkezi kilitleme, navigasyon sistemi, park sensörleri, sisal lambaları, sürgülü kapı, Special equipment:
Redpfxeza Aylj Ah Ueu
Overhead storage compartment in driver's cab, Cargo Plus package, reinforced rear axle (suspension), full-size spare wheel (incl. spare wheel carrier), Traction Plus (electronic traction control incl. ESP), Visibility Plus package
Additional equipment:
Passenger airbag, driver airbag, trailer stability program, traction control system (ASR), electrically adjustable and heated exterior mirrors, long mirrors for 2200 mm vehicle width, black box (event data recorder, EDR), brake assist, roof antenna, Eco package, electronic parking assist, driver assistance system: adaptive load control (LAC), driver assistance system: hill start assist, driver assistance system: intelligent speed assistant, driver assistance system: fatigue warning, driver assistance system: emergency brake assist, driver assistance system: post-collision system, driver assistance system: crosswind assist, driver assistance system: lane keeping assist, driver assistance system: lane keeping assist incl. traffic sign recognition, driver assistance system: rollover protection system, 180 A alternator, cruise control system incl. speed limiter, 8-speed automatic transmission, cooled glove compartment, infotainment system with 5" color display, DAB and Bluetooth interface, bodywork: high-roof panel van standard, fuel tank: 90 liters, black radiator grille, load compartment partition wall, model update (2), engine 2.2 liter - 132 kW turbo diesel Multijet Power, wheelbase 4035 mm, tire repair kit, tire pressure monitoring system, acoustic reversing warning (external warning signal), low emission according to Euro 6e standard, halogen headlights, sliding door right side (load/passenger compartment), seat covers/upholstery: fabric, cab seats: dual passenger seat, cab seats: driver's seat with armrest and lumbar support, SMART tachograph (4.0), engine start/stop system, rearview telecamera, UConnect Box telematics system, gross vehicle weight rating 3.5 t
Küçük ilan
Obertraubling
2.145 km
Yüksek ve uzun kasa van
FIATDucato Maxi L4H2 Klima Automatik Kamera
Çağrı
Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, kilometre: 20.966 km, güç: 132 kW (179,47 bg), yakıt türü: dizel, vites türü: otomatik, toplam ağırlık: 3.500 kg, boş ağırlık: 2.255 kg, azami yük ağırlığı: 1.245 kg, ilk tescil: 11/2024, bir sonraki muayene (TÜV): 05/2028, yükleme alanı uzunluğu: 4.070 mm, yükleme alanı genişliği: 1.870 mm, yükleme alanı yüksekliği: 1.932 mm, emisyon sınıfı: Euro 6, renk: beyaz, koltuk sayısı: 3, önceki sahip sayısı: 1, Üretim yılı: 2024, Donanım: ABS, araba tescili, araç içi bilgisayar, dört mevsim lastikler, ek farlar, elektronik denge programı (ESP), hava yastığı, hidrolik direksiyon, hız sabitleyici, ikinci el araç garantisi, immobilizer sistemi, is filtrasyon filtresi, kamyon kaydı, klima, merkezi kilitleme, navigasyon sistemi, park sensörleri, sisal lambaları, sürgülü kapı, Special equipment:
Overhead storage compartment in driver's cab, Cargo Plus package, reinforced rear axle (suspension), full-size spare wheel (incl. spare wheel carrier), Traction Plus (electronic traction control incl. ESP), Visibility Plus package
Additional equipment:
Rsdeza Awkopfx Ah Ueu
Passenger airbag, driver airbag, trailer stability program, traction control system (ASR), electrically adjustable and heated exterior mirrors, long mirrors for 2200 mm vehicle width, black box (event data recorder, EDR), brake assist, roof antenna, Eco package, electronic parking assist, driver assistance system: adaptive load control (LAC), driver assistance system: hill start assist, driver assistance system: intelligent speed assistant, driver assistance system: fatigue warning, driver assistance system: emergency brake assist, driver assistance system: post-collision system, driver assistance system: crosswind assist, driver assistance system: lane keeping assist, driver assistance system: lane keeping assist incl. traffic sign recognition, driver assistance system: rollover protection system, 180 A alternator, cruise control system incl. speed limiter, 8-speed automatic transmission, cooled glove compartment, infotainment system with 5" color display, DAB and Bluetooth interface, bodywork: high-roof panel van standard, fuel tank: 90 liters, black radiator grille, load compartment partition wall, model update (2), engine 2.2 liter - 132 kW turbo diesel Multijet Power, wheelbase 4035 mm, tire repair kit, tire pressure monitoring system, acoustic reversing warning (external warning signal), low emission according to Euro 6e standard, halogen headlights, sliding door right side (load/passenger compartment), seat covers/upholstery: fabric, cab seats: dual passenger seat, cab seats: driver's seat with armrest and lumbar support, SMART tachograph (4.0), engine start/stop system, rearview telecamera, UConnect Box telematics system, gross vehicle weight rating 3.5 t
Küçük ilan
Sierakowska Huta
2.150 km
Kütük tornası, SÜPER durumda
SAFODNAA 300
Çağrı
Koşul: mükemmel (kullanılmış), çalışma saatleri: 20 h, CATALOG NUMBER 7874
– Manufactured in Poland
– Perfect condition – only 20 hours of operation
– Original technical documentation DTR+CE
– Additional knives included
– Additional bushings included: 18mm, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29mm
– Knife setting device
– Used machine, not repainted
Technical data:
– Diameter of finished billets: 180-300mm
– Max. diameter of raw wood before processing: 380mm
– Max. machining allowance: 40mm per side
– Min. input material length: 1100mm
– Knife head motor power: 55kW
– Variable feed speed (forward/reverse): 1.5–8m/min
– Feed motor power: 7.5kW
Configuration:
– 8 toothed infeed rollers
– 4-knife head
– 6 smooth outfeed rollers
– 7 pneumatic pressure units
– Additional bushings included
– Additional knives included
– Working pressure: 6 bar
– Electrical cabinet dimensions (L/W/H): 900x400x1600mm
– Machine dimensions (L/W/H): 4100x1650x2300mm
– Weight: approx. 4000kg
Rjdpfx Ahoza Eqgo Uou
Net price: 199,900 PLN
Net price: 47,600 EUR (based on 4.2 EUR exchange rate)
(Prices subject to change depending on fluctuations)
Küçük ilan
Sierakowska Huta
2.150 km
6 kafalı dört taraflı planya makinesi
GRIGGIO G240/6Ugłowica uniwersalna
Çağrı
Koşul: mükemmel (kullanılmış), CATALOG NUMBER 6679
TECHNICAL DATA
- Maximum workpiece width: 250 mm
- Maximum workpiece height: 170 mm
6 spindles:
1) Bottom horizontal: 250 mm, 5.5 kW
2) Right vertical: 170 mm, 5.5 kW
3) Left vertical: 170 mm, 5.5 kW
4) Top horizontal: 250 mm, 7.5 kW
5) Bottom horizontal: 250 mm, 7.5 kW
6) Universal: 250 mm, adjustable 360°, 5.5 kW
- 6th spindle electrically adjustable up/down
- All spindles adjustable up/down, left/right
- Spindle diameter: 40 mm
- Top: 6 geared infeed rollers (incl. 2 double rollers)
- Top: 6 rubber outfeed rollers, smooth, driven, incl. 2 double rollers
- Top: 2 pressure rollers
- Bottom: 1 geared, driven, swiveling infeed roller on the table before the first spindle
- Bottom: 2 metal, smooth, driven outfeed rollers
- Bottom: 4 lateral pressure rollers
- Feed on Cardan shafts
- Pneumatically pressed rollers
- Infinitely variable feed speed via inverter: 6–30 m/min
- Feed motor: 4 kW
- Operating pressure: 8–10 bar
- Electric planer thickness adjustment
- Body lift motor: 1.1 kW
- Central table lubrication
- Infeed table length: 2180 mm
- Extraction port diameter: 6 x 150 mm
- Dimensions (LxWxH): 5000 x 1800 x 1900 mm
- Approximate weight: 4600 kg
ADVANTAGES
– Italian manufacture
– 6-head configuration
– Complete documentation (DTR & CE)
– Ideal for processing both wet and dry wood
Rjdpjza Ep Asfx Ah Uju
– Universal spindle
– Excellent condition / like new
Net price: 134,900 PLN
Net price: 32,100 EUR
Net price calculated at an exchange rate of 4.2 PLN/EUR
(prices may change with significant exchange rate fluctuations)
Küçük ilan
Sierakowska Huta
2.150 km
Dört taraflı planya
REIGNMAC RMM423
Çağrı
Koşul: mükemmel (kullanılmış), CATALOG NUMBER 7556
Technical data:
- Min / max working width: 20 / 240 mm
- Min / max working height: 8 / 160 mm
- Number of spindles: 4
1) Lower horizontal 240 mm 5.5 kW
2) Right vertical 160 mm 5.5 kW
3) Left vertical 160 mm 5.5 kW
4) Upper horizontal 240 mm 7.5 kW
- All heads adjustable up/down, right/left
- Spindle diameter: 40 mm
– Upper side:
- 6 feed-in driven, toothed rollers (including 2 double rollers)
- 2 feed-out driven, smooth rubber rollers
– Lower side:
- Lateral pressure before and after the roller in the lower table
- Feed-in driven, toothed, swiveling roller in the lower table before the first spindle
- 2 pneumatic lateral pressure units
- Feed-out driven, smooth metal roller
- All rollers pneumatically loaded
- Infeed table length: 2180 mm
- Table height adjustable (up/down)
- Centralized lubrication
Redpfx Ahsza Enle Uju
- Electric planing thickness adjustment
- Lifting motor: 0.75 kW
- Stepless feed speed adjustment via inverter: 6-30 m/min
- Feed motor: 3 kW
- Feed via Kardan shafts
- Enclosed in a cabin +
- Extraction port diameter: 4x150 mm
- Dimensions L/W/H: 3750x1750x1800 mm
- Weight: 3300 kg
ADVANTAGES
– 4-head configuration
– Ideal for wet and dry wood
– Used machine, in excellent condition
Net price: 75,900 PLN
Net price: 18,070 EUR based on exchange rate of 4.2 EUR
(Prices may vary with significant rate fluctuations)
Küçük ilan
Sierakowska Huta
2.150 km
Dil ve oluk profilleme makinesi
WINTER EMA-300
Çağrı
Koşul: mükemmel (kullanılmış), CATALOG NUMBER 7227
TECHNICAL DATA
- Working width: 40 – 300 mm
- Material thickness: 10 – 35 mm
- Minimum material length: 270 mm
- Maximum material length: unlimited
- Maximum feed speed: 90 m/min
- Feed speed steplessly adjustable via inverter from the control panel
- Cutting speed: 24 m/min
- Spindle moulder motor power: 2 x 4 kW
- Spindle moulder rotation speed: 7,500 rpm
- Feed motor power: 0.75 kW
- Pneumatic top and side pressure
- Spindle diameter: 40 mm
- Driven infeed roller conveyor, length: 1,130 mm
- Manual / automatic operation
- PLC controller with touchscreen for easy operation
- Compressed air connection: 8 bar
- Extraction port diameter: 150 mm
- Dimensions (L x W x H): 2,550 x 1,200 x 1,400 mm
- Weight: 1,100 kg
Redpfx Ajza Emuoh Uou
ADVANTAGES
- German-made
- DTR technical documentation
- Tongue and groove profiling machine
- Complete set of cutters and heads included
- Driven infeed roller conveyor
- Unpainted
- Used machine, very good condition
Net price: 107,900 PLN
Net price: 25,690 EUR (based on an exchange rate of 4.2 EUR)
(Prices may vary with exchange rate fluctuations)
Küçük ilan
Sierakowska Huta
2.150 km
Kenar bantlama makinesi
Holzing G-MAX 480zarabianie naroży wstępny frez
Çağrı
Koşul: yeni, Catalogue No.: HZ014
– Pre-milling unit
– Corner rounding
– New machine, in stock
– CE certificate
– Professional grade
TECHNICAL DATA
Panel thickness: 8-45 mm
Edge thickness: 0.4 mm – 3 mm
Minimum panel width: 90 mm
Minimum panel length: 170 mm
Feed speed: 9 m/min
Pre-milling: 12,000 rpm
Front/rear milling: 12,000 rpm
Top/bottom milling: 12,000 rpm
Corner rounding: 12,000 rpm
Polishing: 3,000 rpm
Feed motor power: 1.13 kW
Glue pot heating power: 1.315 kW
Pre-milling motor power: 1.5 kW
Pre-heating power: 0.4 kW
Glue spindle power: 0.25 kW
Front/rear milling power: 0.22 kW
Top/bottom milling power: 2 × 0.37 kW
Corner rounding power: 0.37 kW
Polishing motor: 0.12 kW & 0.18 kW
Main motor: 6.16 kW
Working table height: 960 mm
Extended support width: 560 mm
Extraction connection: 3 × 125 mm
Machine dimensions (L×W×H): 3731 × 720 × 1636 mm
Weight: 915 kg
Holzing G-MAX 480 straight-line edgebander with pre-milling, saw cutting, top and bottom milling, corner rounding, radius scraper, and polisher delivers a high-quality finish on the workpiece. Edgebanding material can be in coils up to 3 mm thick and strips up to 4 mm thick. The machine is also equipped with a 1.2 kg glue pot.
Net price: 98,000 PLN
Rjdpfeza Emhox Ah Uju
Net price: 23,300 EUR (based on 4.2 EUR exchange rate)
(Prices may vary depending on exchange rate fluctuations)
Küçük ilan
Sierakowska Huta
2.150 km
Metal silindirli geniş bant zımpara makinesi
SCMDMC30 RCS 110 2 agregaty, stan idealny
Çağrı
Koşul: mükemmel (kullanılmış), CATALOG NUMBER 7967
TECHNICAL DATA
Redpfx Aoza Elwsh Uou
- Maximum workpiece width: 1100 mm
- Maximum workpiece height: 170 mm
2 units:
1) Serrated metal roller for calibration
2) Serrated rubber roller + pressure shoe + metal roller
– Top side:
- Rubber infeed roller
- Unit (two units driven by one 15 kW motor)
- Rubber transport roller
- Rubber outfeed roller
- Belt air blower
– Bottom side:
- 2 metal sliding rollers
- Feed belt
- 2 rubber sliding rollers
- Pneumatic belt oscillation
- Sanding thickness potentiometer
- Electric table height adjustment + manual fine adjustment
- Pneumatic brake
- 2 feed speeds
- Working pressure: 6-8 bar
- Extraction port diameter: 2 x 140 mm
- Overall dimensions (LxWxH): 1830x1670x1950 mm
- Weight: 1160 kg
ADVANTAGES
– Italian-made
– 2 sanding units
– Unpainted
– Used sander, in excellent condition
Net price: PLN 77,900
Net price: EUR 18,550 (based on 4.2 EUR exchange rate)
(Prices may vary with significant fluctuations)
Küçük ilan
Sierakowska Huta
2.150 km
çok bıçaklı testere
TOS SVITAVYPWR 412 450 200
Çağrı
Koşul: mükemmel (kullanılmış), CATALOG NUMBER 6650
TECHNICAL DATA
- Maximum cutting height: 200 mm
- Conveyor belt width: 450 mm
- Shaft width: 450 mm
- Blade bore diameter: 80 mm
- Shaft diameter: 60 mm
- Minimum blade diameter: 250 mm
- Maximum blade diameter: 350 mm
- Maximum width of the workpiece: 870 mm
- Minimum length of the workpiece: 1500 mm
From the top:
Redpfx Ahoza Edao Uou
- Pawls
- Driven shaft, geared, metal
- Pawls
- Driven shaft, geared, metal
- Pressure roller
- Shaft with saw blades
- 2 pneumatically pressed metal feed rollers
From below:
- Guide rail
- Metal sliding roller
- Pawls
- Conveyor belt
- Shaft with saw blades
- Conveyor belt
- Stepless feed speed control via inverter: 4–40 m/min
- Main motors: 2 × 75 kW
- Feed motor: 3 kW
- Electric body lift (up/down): 0.55 kW
- Electric adjustment of blade shafts: 2 × 0.25 kW
- Centralized lubrication
- Extraction nozzle diameter: 2 × 300 mm
- Dimensions (length/width/height): 3100 × 2600 × 2000 mm
- Weight: approx. 6,500 kg
- Centering device included
- Geared feed rollers: 3 pcs
- Smooth feed rollers: 8 pcs
- Motor: 2 × 1.5 kW
- Pneumatic upper pressure
- Side pressure
- Dimensions (length/width/height): 4850 × 1100 × 1800 mm
- Weight: approx. 1,000 kg
FEATURES
– Czech manufacture
– Twin-shaft
– Centering device
– Operating and maintenance documentation (DTR)
– Year of manufacture: 2010
– Used multi-blade saw, very good condition
Net price: 262,900 PLN
Net price: 62,600 EUR
Net price calculated at an exchange rate of 4.2 PLN/EUR
(In case of significant exchange rate fluctuations, the price may be subject to change)
Küçük ilan
Sierakowska Huta
2.150 km
Hidrolik besleme ve yardımcı araba
FOD BYDGOSZCZ *DTBC-P i DTCB
Çağrı
Koşul: mükemmel (kullanılmış), Catalog No.: 7502
TECHNICAL DATA
Infeed Carriage DTBC-P
Wheelbase: 750 mm
Feedstock diameter: 100–800 mm
Total lateral travel: 160 mm
Log rotation (left/right): 360 degrees
Travel speed (forward/reverse): stepless
Rsdpfxjza Eaue Ah Uou
Hydraulic pump motor power: 5.5 kW
Auxiliary Carriage DTCB
Wheelbase: 750 mm
Lateral travel range: 160 mm
Log rotation (left/right): 360 degrees
Lateral drive motor power: 1.1 kW
Infeed carriage dimensions (L/W/H): 2850/1400/1500 mm
Auxiliary carriage dimensions (L/W/H): 950/650/750 mm
Total weight: 1450 kg
ADVANTAGES
– Made in Poland
– Robust construction
– Complete with hoses and chains
– Used machine in very good condition, after a full overhaul (invoice available for review)
PRODUCT FEATURES
The auxiliary carriage is designed to support logs or cants on the feed side of the sawmill for diameters from 100 mm to 750 mm.
The infeed carriage is intended for feeding logs and cants to sawmills, for diameters from 100 mm to 750 mm.
This device is used for log handling, including log clamping, lateral movement, and log rotation, all hydraulically driven.
Net price: 59,900 PLN
Net price: 14,260 EUR (based on 4.2 EUR exchange rate)
(Prices may vary due to exchange rate fluctuations)
* MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used exclusively for identification purposes. We only resell goods previously placed on the market by the manufacturer. We have no business relationship with the manufacturer.
Küçük ilan
Sierakowska Huta
2.150 km
Odun parçalayıcı Parçalayıcı
RAPID 3026-KB
Çağrı
Koşul: mükemmel (kullanılmış), CATALOG NUMBER 6631
TECHNICAL DATA
Rjdpfoza D Uqox Ah Ueu
- Feed hopper inlet: 285x305 mm
- Motor power: 7.35 kW
- Number of blades: 3 pcs + 2 counter-blades
- Blade size: 300x75 mm
- Sieve (2 types): 10 mm, 8 mm
- Extraction nozzle diameter: 100 mm
- Dimensions (L/W/H): 1070x900x1980 mm
- Weight: 613 kg
ADVANTAGES
– Swedish-made
– Additional sieve included
– Very good condition
– Used wood chipper
Net price: 22,900 PLN
Net price: 5,450 EUR
Net price calculated at 4.2 PLN/EUR
(price may change in case of significant currency fluctuations)
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Sierakowska Huta
2.150 km
Planya makinesi
ŻEFAM typ DSZC-40
Çağrı
Koşul: mükemmel (kullanılmış), CATALOG NUMBER 7587
Technical data:
- shaft width: 410 mm
- number of knives: 3 pcs
- brake
- table length: 2540 mm
- cast iron tables
- both tables adjustable
- original cast iron fence, angle-adjustable
Redpjza D Spofx Ah Usu
- motor: 3 kW
- dimensions (L/W/H): 2540 x 1000 x 1050 mm
- weight: 730 kg
Advantages:
– made in Poland
– 3-knife cutterhead
– used planer jointer
– condition: very good
Net price: 7900 PLN
Net price: 1880 EUR
Net price calculated at an exchange rate of 4.2 PLN/EUR
(price may change in case of major exchange rate fluctuations)
Küçük ilan
Sierakowska Huta
2.150 km
Caterpillar çok amaçlı testere
RAIMANN KR 230D 250/140
Çağrı
Koşul: mükemmel (kullanılmış), Catalogue number: 7445
TECHNICAL DATA
- Track width: 250 mm
- Shaft width: 400 mm
- Max. blade diameter: 400 mm
- Blade bore diameter: 80 mm
- Max. cutting height: 140 mm
- Table width with clearance: 730 mm
- Table length: 2120 mm
*Top:
- Pawls
- Pressure shaft, smooth
- Pawls
- Pressure shaft, smooth
- Shaft with saw blades
- Smooth pressure shafts, 2 pcs
*Bottom:
- Guide rail
- Sliding shaft, smooth
- Pawls
- Track
- Central lubrication
- 2 lasers
- Stepless feed speed adjustment
- Feed motor: 1.1 kW
- Main motor: 37 kW
- Electric body lift: 0.75 kW
- Electric saw shaft lift: 0.75 kW
- Extraction port diameter: 200 mm
- Overall dimensions (L/W/H): 2200 x 1850 x 2100 mm
- Weight: approx. 3000 kg
Rsdpfx Ajza D Rreh Uju
ADVANTAGES
– German-made
– Laser
– Electric body and shaft lifting
– Stepless feed speed adjustment
– Used multi-blade saw in very good condition
Net price: PLN 109,900
Net price: EUR 26,160 (based on EUR exchange rate 4.2)
(Prices may change depending on exchange rate fluctuations)
Küçük ilan
München
2.152 km
Deniz konteyneri
Supreme München20-Fuß Container
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2025, konteyner uzunluğu: 20 fit, 🚢 20ft Storage Container – As New (Year of Manufacture 2025 / 2026) – Immediately Available!
Premium shipping container in near-new condition – ideal as storage space, workshop, site container or for professional transport purposes.
⭐ Your Benefits at a Glance
🆕 Year of manufacture: 2025 / 2026 – as new
💪 Extremely robust steel construction (2 mm wall thickness)
🌧️ Wind- & watertight
🔐 Securely lockable with 4-point door locking system
🚚 Equipped with CSC plate – suitable for worldwide transport
🌬️ Fitted with ventilation to prevent moisture build-up
🪵 High-quality wooden flooring
🛠️ Forklift pockets integrated in the base
📏 Dimensions & Technical Data
📐 External dimensions: 6,058 × 2,438 × 2,591 mm
📦 Internal dimensions: 5,898 × 2,350 × 2,390 mm
🚪 Door opening width: 2,343 mm
🧱 Volume: approx. 33 m³
Rsdswu Uy Uepfx Ah Usu
⚖️ Tare weight: approx. 2.25 t
🏋️ Payload: up to 30 t
These containers impress with their durability, security, and versatility – ideal for commercial, construction, craft, or demanding private applications.
📬 Enquire now – we will prepare a tailored offer for you!
👀 Further container sizes & variants available.
🚛 Nationwide delivery available (for a surcharge).
Küçük ilan
Sokołów Podlaski
1.801 km
Üniversal freze makinesi 1600 × 360
Metal Technics PolskaFREZARKA UNIWERSALNA MTP XL6436CL
Çağrı
Koşul: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, besleme uzunluğu X ekseni: 1.300 mm, y ekseni ilerleme uzunluğu: 320 mm, Z ekseni ilerleme mesafesi: 450 mm, toplam yükseklik: 2.000 mm, toplam genişlik: 2.100 mm, toplam uzunluk: 2.520 mm, masa genişliği: 360 mm, masa uzunluğu: 1.600 mm, giriş akımı türü: trifaze, masa yükü: 500 kg, toplam ağırlık: 2.800 kg, giriş voltajı: 400 V, garanti süresi: 12 aylar, Donanım: dokümantasyon / kılavuz, Vertical Milling Machine
Vertical milling machines are characterized by the ability to move the entire spindle head along the column guides. This machine is ideally suited for machining tools, fixtures, and engine components.
Features
- Vibration-damping cast iron construction for reduced vibration
- Safety covers in accordance with applicable safety standards
- Automatic feed on all three axes
- Rapid traverse on all three axes
- Digital position display (DRO)
- Infinitely variable feed rate
- Servo drives for precise and safe operation
- Large worktable with high load capacity
- Hardened and ground gears for significantly reduced noise levels
- Centralized lubrication system
- Functional control panel for intuitive operation
- Adjustable to any desired incline angle
- Table guard available as an optional accessory
Technical Data
| Parameter | Specification |
|-----|----- |
| Worktable dimensions | 1600 × 360 mm |
| Maximum table load | 500 kg |
| Swivel angle of worktable | -45° / +45° |
| Travel X/Y/Z | 1300 / 320 / 450 mm |
| Feed rate, X axis | 30–750 mm/min |
| Feed rate, Y axis | 20–500 mm/min |
| Feed rate, Z axis | 15–375 mm/min |
| Rapid traverse X/Y/Z | 1200 / 800 / 600 mm/min |
| T-slots | 3 / 18 / 80 mm |
Redpfxoyuculo Ah Uju
| Spindle taper | Horizontal ISO50 / Vertical ISO50 |
| Overarm travel | 550 mm |
| Distance from vertical spindle to table | 196–646 mm |
| Distance from horizontal spindle to table | 20–470 mm |
| Vertical spindle speed | (12) 60–1750 rpm |
| Horizontal spindle speed | (12) 60–1800 rpm |
| Vertical spindle motor | 4.0 kW |
| Horizontal spindle motor | 5.5 kW |
| Feed motor power X/Y/Z | 1.5 / 1.5 / 1.5 kW |
| Servo drive | 10 Nm |
| Dimensions (L × W × H) | 2520 × 2100 × 2000 mm |
| Weight | 2800 kg |
Delivery
Delivery to the customer's location is available. Transport costs are calculated individually by the forwarding company.
If you are interested in additional machines, please visit our website.
Sizin için aramayı kolaylaştırıyoruz: "dana te10"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay














































































































































































































































































































































































































