Kullanılmış Kaltenbach Kks 400 Na satın al (22.387)

Koşul: mükemmel (kullanılmış), Parça numarası 7259 TEKNİK VERİLER - Besleme genişliği: 400 mm - Besleme yüksekliği: 200 mm - Mil genişliği: 530 mm - Mil çapı: 550 mm - Bıçak uzunluğu: 530 mm - Bıçak sayısı: 2 adet - Elek boyutları: 50x50 mm - Alttan tahrikli 2 dişli çeki mili - Alt mil için motor: 2,2 kW - Üstten tahrikli dişli çeki mili - Üst mil için motor: 2,2 kW - Bantlı besleyici: 0,55 kW - Besleme bandı uzunluğu: 3000 mm Ppodpoyka E Tofx Anxer - Besleme bandı genişliği: 410 mm - Ana motor: 45 kW - Oto-revers özelliği - Geri vites - Makine ölçüleri (uz./gen./yük.): 2900x1600x1600 mm - Besleyici ölçüleri (uz./gen./yük.): 3070x720x670 mm - Ağırlık: yaklaşık 3500 kg AVANTAJLAR - Alman üretimi - Oto-revers (ayar imkanlı) - Geri vites - Kullanılmış yonga makinasi, çok iyi durumda Net fiyat: 85.900 PLN Net fiyat: 20.450 EUR (4,2 EUR değişken kur ile) (Fiyat dalgalanmalarına bağlı olarak değişebilir)

Koşul: mükemmel (kullanılmış), Catalog number: 7275 TECHNICAL DATA - Max planing width: 610 mm - Max planing height: 200 mm From above: - Feed roller, toothed - Anti-kickback fingers - 2 pressure rollers - Draw-in roller, toothed - Pressure roller - Planing shaft 610 mm, 4-knife, 7.5 kW - Pressure rollers - Outfeed roller, smooth From below: Ppsdpfxeytdkxs Anxor - Guide bar - Adjustable infeed table with split smooth sliding roller - Planing shaft 610 mm, 4-knife, 5.5 kW - 2 smooth sliding feed rollers - Side pressure roller From the rear: - Side spindles + 2 pressure rollers: 1) Right vertical – 5.5 kW 2) Left vertical – 5 kW - Max planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable vertically and horizontally 3) Additional horizontal spindle, 160 mm, adjustable vertically/horizontally and angle, approx. 4 kW - Option for planing with the additional spindle from above/below/side - Spindle diameter: 35 mm - Adjustable rollers in bottom table - 2 feed speeds - Feed motor: 2.2 kW - Extraction port diameter: 120 mm - Dimensions (L/W/H): 2550 x 1700 x 1350 mm - Weight approx.: 3000 kg ADVANTAGES - Wide planer for wet and dry wood – Ideal for processing beams, floorboards, etc. – 2 horizontal planing shafts + 2 vertical spindles + 1 horizontal spindle – Cutter heads included – Made by the German brand KUPFERMUHLE – Used planer, condition very good Original photos Net price: 58,900 PLN Net price: 14,020 EUR (depending on exchange rate 4.2 EUR) (Prices may vary due to rate fluctuations)

Koşul: yeni, CATALOGUE NUMBER RE036 2 axes – electric control for raising and tilting the main saw with electronic readout for height and angle, control panel integrated into the machine body – brand new, demonstration model – DTR (Technical Documentation) + CE certification – cutting width at guide: 1300 mm – main motor: 6 kW TECHNICAL DATA - Saw blade tilt: 0–46˚ - Main motor power: 6 kW - Cutting length on carriage: 3000 mm Pedsyz N T Aspfx Anxopr - Main spindle speed: 3500/4500 rpm - Spindle diameter: 30 mm - Main blade diameter: 300–400 mm - Maximum scoring blade diameter: 125 mm - Scoring motor power: 0.75 kW - Scoring blade speed: 8500 rpm - Scoring arbor diameter: 20 mm - Cutting width at guide (standard 1050 mm): 1300 mm - Cutting width with stops on auxiliary table: 215–3200 mm - Cutting height for 300 mm blade, 90°/45°: 90/60 mm - Cutting height for 350 mm blade, 90°/45°: 5–115 / 3.5–80 mm - Cutting height for 400 mm blade, 90°/45°: 25–140 / 15.5–95 mm - Extraction port diameter: 80 mm, 125 mm - Dimensions (L/W/H): 3300/3460/1500 mm - Weight: 750 kg Optional equipment: – Angle gauge – with aluminium rail Net price: 47,000 PLN Net price: 11,300 EUR (based on 4.15 PLN/EUR exchange rate) (Prices may vary depending on exchange rate fluctuations)

Koşul: mükemmel (kullanılmış), CATALOG NUMBER 7503 TECHNICAL DATA: - Max planing width: 610 mm - Max planing height (double-sided): 200 mm - Max planing height (four-sided): 100 mm Top side: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller shaft - Kickbacks - Pressure bar - 2 toothed feed shafts - Pressure bar - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure bar - Smooth metal feed roller - Pressure bar - Profiling shaft 7.5 kW - Pressure bar - Rubber feed roller Bottom side: - Planing shaft, 35 mm spindle diameter, spindle length 130 mm, 2.2 kW - 2 guide bars - Infeed table - Smooth feed shaft - 610 mm planing shaft, 4-knife (currently fitted with 2 knives), 7.5 kW - 2 smooth feed shafts - Split metal sliding roller - Side pressure unit Rear side: - Side spindles + 2 pressure units - 1) Right vertical, 95 mm, 4 kW - 2) Left vertical, 95 mm, 4 kW - Spindle diameter: 35 mm - Adjustable spindles (up/down, right/left) - Adjustable rollers in the bottom table - Electric thickness adjustment - 6 feed speed settings: 7/9/11.5/14/18/23 m/min - Feed motor: 3.1 kW - Suction outlet diameters: 3×120 mm, 3×160 mm - Dimensions (L×W×H): 3150×1900×1600 mm - Weight: approx. 3500 kg Ppjdpfeyz Sfbex Anxor ADVANTAGES: – The best wide planer for both wet and dry wood – Perfect for processing beams, flooring, etc. – Additional profiling shaft and scoring planer shaft – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, in very good condition Net price: PLN 66,900 Net price: EUR 15,930 (calculated at 4.2 EUR/PLN) (Prices may vary depending on exchange rate fluctuations)

Koşul: mükemmel (kullanılmış), CATALOG NO. 72133 TECHNICAL DATA - Maximum cutting height: 180 mm - Feed chain width: 400 mm - Feed roller width: 370 mm - Feed roller diameter: 60 mm - Maximum saw blade diameter: 300 mm - Saw blade bore diameter: 80 mm - Minimum workpiece length: 630 mm - Maximum workpiece width: 600 mm Top section: - Pneumatic hold-down - Kickback pawls - Metal pressure roller, 2 pcs - Kickback pawls - Saw arbor - Smooth pressure roller - Kickback pawls - Smooth pressure roller Bottom section: - Metal, driven, toothed feed rollers, 2 pcs - Kickback pawls - Feed chain Ppjdpfx Ajyr Rmqsnxsr - Saw arbor - Feed chain - Infinitely variable feed speed regulation via inverter - Main motors: 2 x 55 kW - Feed motor: 4 kW - Hydraulic raising/lowering of machine frame - Hydraulic adjustment of saw arbors - Pump motor: 0.37 kW - Central lubrication - Extraction outlet diameter: 1 x 300 mm, 1 x 380 mm - Dimensions (LxWxH): 3200 x 2350 x 2000 mm - Weight: approx. 5500 kg ADVANTAGES – Italian manufacture – Double arbor – Used multi-blade saw, in very good condition Net price: 238,900 PLN Net price: 56,880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change with larger exchange rate fluctuations)

Koşul: mükemmel (kullanılmış), Catalog number 7640 ADVANTAGES – The best wide planer for processing both wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing heads + 3 spindles Ppodpsyaq Tajfx Anxer – Manufactured in Germany by KUPFERMUHLE – Used planer, in very good condition TECHNICAL DATA - Max planing width: 610 mm - Max planing height: 200 mm - Top section: - Feed-in driven, toothed roller - Kickback pawls - Pressure bar - 2 driven, toothed rollers - Pressure bar - 610 mm, 6-knife planing cutterblock, 15 kW - Pressure bars - Outfeed driven smooth roller - Bottom section: - Lateral pressure at infeed - Guide rail - Infeed table - Driven, toothed roller - 610 mm, 6-knife planing cutterblock, 7.5 kW - 2 smooth driven rollers - Lateral pressure at outfeed - Rear section: - 2 side spindles + pressure bars: 1) right vertical spindle 200 mm, 15 kW 2) left vertical spindle 200 mm, 15 kW - Left vertical spindle electrically adjustable (left/right) - Spindle diameter: 40 mm - Spindles can be alternately positioned - Spindles adjustable vertically & horizontally 3) Additional lower horizontal spindle 160 mm, adjustable vertically & horizontally, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower rubber feed rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8/16.3/20/25.6/32.6/40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120 mm, 2×160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight approx.: 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (calculated at 4.2 EUR rate) (Prices may change depending on currency fluctuations)

Koşul: yeni, Taşlama diski genişliği maks. 145 mm Taşlama diski çapı/deliği 300 mm Flanş konisi Reishauer 0 Taşlama diski boyutları 300x145x160 mm Destek flanşı (makine tipi Reishauer RZ 400/800/1000) + taşlama diski dahil 3M şirketinden T1SP 300x145x160 M 2.5 EW20° 3GG Cubitron Diş kanadı taşlama için seramik taşlama diskleri - 145 mm genişlik Makine tipine göre boyutlar Reishauer Spesifikasyona göre profil oluşturma Modül m, çalışma hızı gg, basınç açısı EW Avantajlar: Psdpfx Aneuayy Tjxjpr - Zımpara yanığı riski sıfıra yakındır - 50'ye kadar daha kısa zımparalama süreleri - Giyinme çabası 2 kat azaldı - Taşlama disklerinin iki katı hizmet ömrü - Sürekli, tutarlı zımparalama performansı - Standart aletlere göre önemli ölçüde daha yüksek zımparalama parametreleri

Koşul: yeni, Taşlama diski genişliği maks. 145 mm Taşlama diski çapı/deliği 300 mm Flanş konisi Reishauer 0 Taşlama diski boyutları 300x145x160 mm Destek flanşı (makine tipi Reishauer RZ 400/800/1000) + taşlama diski dahil 3M şirketinden T1SP 300x145x160 M 1.5 EW20° 3GG Diş kanadı taşlama için seramik taşlama diskleri - 145 mm genişlik Makine tipine göre boyutlar Reishauer Spesifikasyona göre profil oluşturma Modül m, çalışma hızı gg, basınç açısı EW Avantajlar: - Zımpara yanığı riski sıfıra yakındır - 50'ye kadar daha kısa zımparalama süreleri Ppodpfouayy Hox Anxsr - Giyinme çabası 2 kat azaldı - Taşlama disklerinin iki katı hizmet ömrü - Sürekli, tutarlı zımparalama performansı - Standart aletlere göre önemli ölçüde daha yüksek zımparalama parametreleri

Koşul: yeni, Taşlama diski genişliği maks. 145 mm Taşlama diski çapı/deliği 300 mm Flanş konisi Reishauer 0 Taşlama diski boyutları 300x145x160 mm Destek flanşı (makine tipi Reishauer RZ 400/800/1000) + taşlama diski dahil 3M şirketinden T1SP 300x145x160 M 2.25 EW20° 3GG Diş kanadı taşlama için seramik taşlama diskleri - 145 mm genişlik Makine tipine göre boyutlar Reishauer Spesifikasyona göre profil oluşturma Modül m, çalışma hızı gg, basınç açısı EW Ppjdpfx Ajuayyysnxsr Avantajlar: - Zımpara yanığı riski sıfıra yakındır - 50'ye kadar daha kısa zımparalama süreleri - Giyinme çabası 2 kat azaldı - Taşlama disklerinin iki katı hizmet ömrü - Sürekli, tutarlı zımparalama performansı - Standart aletlere göre önemli ölçüde daha yüksek zımparalama parametreleri

Koşul: yeni, Taşlama diski genişliği maks. 145 mm Taşlama diski çapı/deliği 300 mm Flanş konisi Reishauer 0 Taşlama diski boyutları 300x145x160 mm Destek flanşı (makine tipi Reishauer RZ 400/800/1000) + taşlama diski dahil 3M şirketinden T1SP 300x145x160 M1 EW20° 2GG Diş kanadı taşlama için seramik taşlama diskleri - 145 mm genişlik Makine tipine göre boyutlar Reishauer Spesifikasyona göre profil oluşturma Modül m, çalışma hızı gg, basınç açısı EW Ppjdpfx Ansuayymjxor Avantajlar: - Zımpara yanığı riski sıfıra yakındır - 50'ye kadar daha kısa zımparalama süreleri - Giyinme çabası 2 kat azaldı - Taşlama disklerinin iki katı hizmet ömrü - Sürekli, tutarlı zımparalama performansı - Standart aletlere göre önemli ölçüde daha yüksek zımparalama parametreleri

Koşul: ikinci el, Üretim yılı: 2007, Fonksiyonellik: tamamen fonksiyonel, Horizontal bandsaw Make: KALTENBACH Model: KBS 620 DG Year: 2007 Technical Data Manufacturer: Kaltenbach Model: KBS 620 DG Year of manufacture: 2007 Working range: 620 x 350 mm Round working range: 360 mm Ppsdpfoy H D Raox Anxer Saw blade dimensions: 6175 x 41 x 1.3 mm Cutting speed: 15–90 m/min Saw blade tilt: 3° Feed rate: 0 – 300 mm/min Saw dimensions: L 3.0 x W 1.2 x H 2.10 m Roller conveyor dimensions: L 8.6 x W 1.1 m (incl. stop) Weight: approx. 2.6 t Equipment • Roller conveyor with CNC measuring system, L = 8,600 mm • CNC stop stroke 7,200 mm • Minimum quantity lubrication system • Laser cut line indicator • Automatic saw blade cleaning • CNC control Kaltenbach AS620 • CNC stop control EPS 80 • Automatic vertical hold-down • Automatic horizontal hold-down All information without guarantee. A demonstration is possible at any time in our showroom.

Koşul: ikinci el, Üretim yılı: 2007, 1 pc mitre saw KALTENBACH TL450 with 2x roller conveyors, each approx. 200x47x120cm Ppjdpfx Aney D Nciexjr Colour: as shown, in accordance with pictures and inspection Year of manufacture: 2007 Condition: used Location of goods: warehouse Payment method: advance payment by bank transfer Shipping: Collection only from location Ditzingen-Heimerdingen

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2020, çalışma saatleri: 200 h, Fonksiyonellik: tamamen fonksiyonel, kol uzunluğu: 1.437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Configuration: Panasonic TM 1400 G3 robot (6 axes, 1437 mm reach, 6 kg payload), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, with accessories and safety equipment. What makes this workstation unique is its capability to safely weld aluminum, in addition to steel and stainless steel. The process is highly synchronized with wire feeding. It can locate welds and respond to arc height changes. This is a very proficient system. Ppjdpfoy Efmgex Anxer I am selling this set because our original capacity expectations were not met (we do not have enough production volume in the hundreds/thousands of pieces). During its lifetime (about 5 years), the workstation was turned on for approximately 200 hours and actually welded only during test runs, less than one hour in total. So it is practically as good as new. It’s a pity for it to remain unused. All support has been provided directly by ValkWelding. In case of sale, they can arrange installation, commissioning, and staff training by agreement.

Koşul: iyi (kullanılmış), güç: 338 kW (459,55 bg), yakıt türü: dizel, renk: sarı, Üretim yılı: 2017, çalışma saatleri: 22.072 h, Donanım: klima, Teknik Bilgiler Motor markası: SAA6D140E-5 Azami hız: 40 km/s Boş ağırlık: 33.925 kg Fonksiyonellik Yükleme alanı hacmi: 40.000 l Psdpfsyyuddjx Anxopr Durum Teknik durum: iyi Görsel durum: iyi Kimlik FIN: T5145 Seri numarası: KMTHM013EHD008452 Ek Bilgiler Maksimum taşıma kapasitesi: 40.000 kg Emisyon seviyesi: Stage II / Tier II Teslimat şartları: EXW Taşıma ölçüleri (U x G x Y): 11,105 x 3,45 x 3,735 Üretim ülkesi: JP Ek Bilgiler Daha fazla bilgi için Antonio Francisco Pinto, Jeroen Heindryckx, Bart Apers veya Matthias Eyckmans ile iletişime geçin. = Ek seçenekler ve donanımlar = - Akü ana şalteri - Arka kapak - Döner uyarı lambası

Koşul: iyi (kullanılmış), güç: 338 kW (459,55 bg), yakıt türü: dizel, renk: sarı, Üretim yılı: 2017, çalışma saatleri: 22.996 h, Donanım: klima, Teknik Bilgiler Motor Markası: SAA6D140E-5 Azami Hız: 40 km/h Boş Ağırlık: 33.925 kg Fonksiyonel Kasa Hacmi: 40.000 l Durum Teknik Durum: iyi Görsel Durum: iyi Psdsyyuc Hspfx Anxjpr Kimlik FIN: T5143 Seri Numarası: KMTHM013TFD008323 Ek Bilgiler Maksimum Taşıma Kapasitesi: 40.000 kg Emisyon Seviyesi: Stage II / Tier II Teslim Şartları: EXW Taşıma Ölçüleri (U x G x Y): 11.105x3.45x3.735 Üretim Ülkesi: JP Ek Bilgiler Daha fazla bilgi için lütfen Antonio Francisco Pinto, Jeroen Heindryckx, Bart Apers veya Matthias Eyckmans ile iletişime geçin. = Diğer Opsiyonlar ve Donanımlar = - Akü Ana Kesme Şalteri - Arka Kapak - Dönüşlü Uyarı Lambası

Koşul: iyi (kullanılmış), güç: 338 kW (459,55 bg), yakıt türü: dizel, renk: sarı, Üretim yılı: 2017, çalışma saatleri: 16.134 h, Donanım: klima, Teknik Bilgiler Motor markası: SAA6D140E-5 Azami hız: 40 km/s Boş ağırlık: 33.925 kg Fonksiyonel Yük alanı kapasitesi: 40.000 l Durum Teknik durum: iyi Optik durum: iyi Kimlik FIN: T5158 Seri numarası: KMTHM013TFD008337 Ek Bilgiler Maksimum taşıma kapasitesi: 40.000 kg Emisyon seviyesi: Stage II / Tier II Teslimat koşulları: EXW Podpfoyyudkjx Anxopr Taşıma boyutları (U x G x Y): 11,105x3,45x3,735 Üretim ülkesi: JP Ek Bilgiler Daha fazla bilgi için Antonio Francisco Pinto, Jeroen Heindryckx, Bart Apers veya Matthias Eyckmans ile iletişime geçin. = Ek seçenekler ve aksesuarlar = - Akü ana şalteri - Arka kapak - Dönüşlü uyarı lambası

Koşul: iyi (kullanılmış), güç: 338 kW (459,55 bg), yakıt türü: dizel, renk: sarı, Üretim yılı: 2017, çalışma saatleri: 21.766 h, Donanım: klima, Teknik Bilgiler Motor markası: SAA6D140E-5 Azami hız: 40 km/s Boş ağırlık: 33.925 kg Fonksiyonel Yükleme alanı hacmi: 40.000 l Durum Podpfx Aneyyuc Toxspr Teknik durum: iyi Görsel durum: iyi Kimlik Bilgileri FIN: T5144 Seri numarası: KMTHM013HHD008451 Ek Bilgiler Maks. taşıma kapasitesi: 40.000 kg Teslimat koşulları: EXW Taşıma ölçüleri (U x G x Y): 11.105x3.45x3.735 Üretim ülkesi: JP Ek Bilgiler Daha fazla bilgi için Antonio Francisco Pinto, Jeroen Heindryckx, Bart Apers veya Matthias Eyckmans ile iletişime geçebilirsiniz. = Diğer opsiyonlar ve aksesuarlar = - Akü ana şalteri - Arka kapak - Döner ikaz lambası

Koşul: iyi (kullanılmış), Üretim yılı: 2018, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 313026, testere bıçağı çapı: 450 mm, toplam uzunluk: 10.000 mm, toplam yükseklik: 2.000 mm, toplam genişlik: 1.200 mm, toplam ağırlık: 2.000 kg, KALTENBACH SKL 450 H Semi-automatic Cold Circular Saw Pedpfxoy Dcr Do Anxspr - Operating voltage: 3 x 400 V - Frequency: 50 Hz - incl. roller conveyors Note: The item must be picked up definitively between 07 and 09 July 2026 on a date to be agreed upon. FCA D-71263 Weil der Stadt – loaded onto truck

Koşul: iyi (kullanılmış), Üretim yılı: 1998, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 119349, testere bıçağı çapı: 450 mm, toplam uzunluk: 12.000 mm, toplam yükseklik: 2.000 mm, toplam genişlik: 1.200 mm, toplam ağırlık: 1.500 kg, KALTENBACH SKL 450 H Cold Circular Saw (completely overhauled) - Saw blade diameter: 400/450 mm - Saw blade mount: 50/4 x 14/80 - Working range for round material at 90°: 135/160 mm - Square at 90°: 125/145 mm - Profiles at 90°: 300 x 40 mm / 320 x 50 mm - Profiles horizontal at 45°: 220 x 60 mm / 250 x 40 mm Psdpfxjy Dcrws Anxspr - Profiles vertical at 45°: 60 x 130 mm / 100 x 150 mm - Saw motor: 3.7 / 4.7 kW - Cutting speed: 1950/3900 m/min - Infeed roller conveyor T3, outfeed roller conveyor T3 with length measuring device L45E, one starter piece: 2000 mm, horizontal clamping system SKL 450 Note: The machine has been completely overhauled! Note: The item must be picked up, bindingly, between 07 and 09 July 2026 at a mutually agreed date. FCA D-71263 Weil der Stadt – loaded onto truck

Koşul: iyi (kullanılmış), CRATHERN, PERONDI IA630, NA 900'ün satışı. Podjud Axgepfx Anxjpr

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2014, Glaslift 400 - dış mekan cam kaldırıcı, Glasheber, Glaslift, vinç, Uplifter, Winlet, Glassrobot Cam, pencere, sac levha için manipülatör - lift, vinç - 2014 yılı - maksimum taşıma kapasitesi 400 kg Ppsdpovwbfqefx Anxer - bir otomatik uzatma - döndürme - 4 vakum vantuzu - elektrikli tahrik - iki akü - entegre şarj cihazı İhracat fiyatı Taşıma imkanı (sadece inceleme veya ödeme sonrası) - durumu fotoğraflardaki gibi İhracat fiyatı Bu kaldırıcıyı Polonya'da görebilirsiniz - Piwniczna Zdrój - Krakow'a 120 km mesafede

Koşul: ikinci el, We offer used shelving units for sale here. TECHNICAL DATA Manufacturer: FX Rauscher Type: P30 Condition: used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Shelf load: 100 kg Number of levels: 6 Plug-in assembly Usage: single-sided Material: galvanized steel PRICE €1,216.25 net (5 starter bays + 20 add-on bays) €1,447.34 gross incl. VAT Volume pricing Starter bays: 1 - 5 units: €70.00 net 6 - 20 units: €66.63 net 21 - 50 units: €63.25 net from 51 units: €59.88 net Add-on bays: 1 - 5 units: €50.00 net 6 - 20 units: €47.50 net 21 - 50 units: €45.00 net from 51 units: €42.50 net Large quantities available directly from stock. YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann Pedpfx Anoy Hqt Ioxopr TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at an additional cost, depending on delivery location and shipment size. Please contact us for an individual quote. PROJECT PLANNING Our sales team will gladly prepare a non-binding, customized offer tailored to your requirements. PAYMENT TERMS Payment conditions are to be agreed upon in case of order. The price is quoted per unit/net price unless otherwise stated (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK in Nordhorn deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for trade, industry, and crafts. We constantly offer attractive second-hand items from various manufacturers and brands at competitive conditions. Please feel free to contact us if you have any questions. Four Success Factors – The building blocks of DLK. Warehouse Technology | Levelmaker® | Logistics | Solutions

Koşul: ikinci el, We are offering used shelving racks for sale. TECHNICAL DATA Manufacturer: FX Rauscher Type: P30 Condition: Used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Shelf load capacity: 100 kg Number of shelves: 6 pcs Assembly: Boltless plug-in system Use: Single-sided Material: Galvanized steel PRICE €85.20 net (1 starter bay) €101.39 gross incl. VAT Bulk Prices Starter bays: 1 - 5 pcs: €70.00 net each 6 - 20 pcs: €66.63 net each 21 - 50 pcs: €63.25 net each 51 pcs and above: €59.88 net each Extension bays: 1 - 5 pcs: €50.00 net each 6 - 20 pcs: €47.50 net each 21 - 50 pcs: €45.00 net each 51 pcs and above: €42.50 net each Large quantities available directly from stock. YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for pick-up. Delivery or shipping is possible for an additional charge. The extra costs depend on the destination and the volume of the shipment and can be provided upon request. PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, customized offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly of the goods. PAYMENT TERMS Terms of payment are to be agreed upon when placing an order. The price is per unit/net price or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. Ppedpjy Hqtnjfx Anxjr ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and workshops. We always have a range of interesting used offers from various manufacturers/brands at attractive conditions. If you have any questions, please feel free to contact us. "Vier gewinnt" – The Four Building Blocks of Success at DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions.

Koşul: ikinci el, We offer used shelving racks here. TECHNICAL DATA Manufacturer: FX Rauscher Ppedpfxoy Hqr Re Anxor Type: P30 Condition: used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Shelf load: 100 kg Number of levels: 6 pcs Boltless assembly Usage: single-sided Material: galvanized steel PRICE €270.00 net (1 base unit + 4 add-on units) €321.30 gross incl. VAT Graduated prices Base units: 1–5 units: €70.00 net y 6–20 units: €66.63 net 21–50 units: €63.25 net from 51 units: €59.88 net Add-on units: 1–5 units: €50.00 net 6–20 units: €47.50 net 21–50 units: €45.00 net from 51 units: €42.50 net Large quantities available ex stock. YOUR CONTACTS AT OUR COMPANY: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible at an additional charge. The extra costs depend on the delivery location and the size of the consignment and can be provided upon request. PROJECT PLANNING Our sales team will gladly prepare a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. TERMS OF PAYMENT Payment terms are to be agreed upon when placing an order. The price is a unit/net price or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, warehouse mezzanines, textile storage as well as machines for the trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at favorable conditions. If you have any questions, please do not hesitate to contact us. Connect Four – The success pillars of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Koşul: ikinci el, We are offering used shelving rack units here. TECHNICAL DATA Manufacturer: FX Rauscher Type: P30 Condition: used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Compartment load: 100 kg Number of levels: 6 pcs. Boltless assembly Use: single-sided Material: galvanized steel PRICE €506.50 net (2 starter bays + 8 add-on bays) €602.74 gross incl. VAT Pedpfx Aoy Hqrkonxepr Tiered prices Starter bays: 1 - 5 units: €70.00 net 6 - 20 units: €66.63 net 21 - 50 units: €63.25 net from 51 units: €59.88 net Add-on bays: 1 - 5 units: €50.00 net 6 - 20 units: €47.50 net 21 - 50 units: €45.00 net from 51 units: €42.50 net Large quantities available directly from stock. YOUR CONTACT PERSONS AT OUR COMPANY: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item can be collected from our warehouse. Delivery or shipping is available at extra cost. Additional costs depend on the delivery location and the scope of the shipment and can be individually requested from us. PROJECT PLANNING Our sales team is happy to prepare a non-binding, tailored quotation to suit your needs. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The price is to be understood as unit/net price or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, warehouse platforms, textile storage systems as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The four pillars of DLK: Storage Technology | Levelmaker® | Logistics | Solutions.