Kullanılmış Ekomak Eko-30D Vst satın al (822)

Durumu: yeni, boş ağırlık: 865 kg, azami yük ağırlığı: 1.835 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.050 mm, yükleme alanı genişliği: 1.840 mm, yükleme alanı yüksekliği: 2.050 mm, yükleme alanı hacmi: 15,5 m³, renk: siyah, inşaat yüksekliği: 2.690 mm, çalışma genişliği: 2.350 mm, Hydraulics, automatic reversing system, hot-dip galvanising, unbraked, tandem with 30 mm steel panel sandwich body, braked, 2 lashing rails, 8 lashing rings, *IMMEDIATELY AVAILABLE* Tandem with 30 mm steel panel sandwich body, braked, 2 lashing rails, 8 lashing rings Technical Data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATE! - Gross vehicle weight: 2,700 kg - Unladen weight: 865 kg - Payload: 1,835 kg - Internal dimensions: 405 x 184 x 205 cm (L x W x H) - Overall external dimensions: 563 x 235 x 269 cm (L x W x H) - Loading edge height: 59 cm - Tyres: 185R14C steel rim - Brake: yes - Jockey wheel: yes - 100 km/h approval: available at extra cost - Including vehicle documents Superstructure: - Floor: Finnish birch multiplex panel - Walls: 30 mm steel sandwich panel Lrjdpju Htngjfx Aiqsk - Roof material: 25 mm GRP sandwich - Suspension: ALKO rubber torsion axle - Number of lashing rings: 8 units (750kg/daN each) - Rear door: yes, double-leaf - Tailgate: no - Tailgate material: N/A - Rear door/tailgate function: cam locking system - Rear door/gate passage dimension: N/A - Interior light: available at extra cost - Support legs: available at extra cost - Overrun device & brake: yes - Chassis/frame: V-drawbar, hot-dip galvanised - Light connector: 13-pin - Road registration: COC documents Standard Equipment: - Robust V-drawbar, hot-dip galvanised - Tandem axle - Overrun brake system by ALKO - Floor panel made from Finnish multiplex - Side walls made from very robust 30 mm steel sandwich panel - Roof made from 25 mm GRP sandwich - Two-leaf rear doors - Doors with special sealing profiles, made from hard/soft composite plastics - Stainless steel cam-lock system and galvanised hinges - Rear frame and edging profiles made from special aluminium profiles - 8 lashing points in the floor, lashing force 750 kg each - Pre-fitted lashing rails on both sides - Automatic jockey wheel - Automatic reversing system - Plastic mudguards - 13-pin connector - Reverse light - High-capacity safety lighting - Integrated rear fog light - Structure is splash water protected - Registration documents: COC papers Special equipment included in the price: - Side door 700 mm wide, lockable from inside and outside Retrofittable accessories at extra cost – please inquire: - Anti-theft device - Rear supports - 100 km/h approval with shock absorbers - Side door - Motorcycle wheel chocks - Motorcycle rails - Motorcycle lashing straps - Lashing straps - Additional lashing rings - Additional slotted rail systems for tie-down straps & blocking bars - Bead rail with rubber coating for securing straps & blocking bars - Blocking bars (steel or aluminium) - Interior lighting - Reverse lights - And much more New vehicle with warranty and TÜV. We are happy to offer suitable financing! Descriptions and images are copyright protected! Over 800 trailers are immediately available in our stock! We have been authorised specialist retailers & repair workshops for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberté / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. Nationwide delivery in Germany available at extra charge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Subject to errors, omissions, and prior sale -

Durumu: yeni, boş ağırlık: 735 kg, azami yük ağırlığı: 1.965 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.050 mm, yükleme alanı genişliği: 1.840 mm, yükleme alanı yüksekliği: 2.050 mm, yükleme alanı hacmi: 11,7 m³, renk: siyah, inşaat yüksekliği: 2.690 mm, çalışma genişliği: 2.350 mm, Hydraulics, automatic reversing mechanism, hot-dip galvanization, unbraked, tandem with 30mm steel sandwich construction, braked, 2 lashing rails, 6 lashing rings, * AVAILABLE IMMEDIATELY * Tandem with 30mm steel sandwich construction, braked, 2 lashing rails, 6 lashing rings Technical Data: - Type: New vehicle - TÜV (inspection): New/2 years - Availability: IMMEDIATE! - Permissible total weight: 2,700 kg - Unladen weight: 735 kg - Payload: 1,965 kg - Internal dimensions: 305 x 184 x 205 cm (L x W x H) - Total external dimensions: 454 x 235 x 269 cm (L x W x H) - Loading edge height: 59 cm Lrjdpju Skuusfx Aiqjk - Tyres: 185R14C steel rims - Brakes: Yes - Jockey wheel: Yes - 100 km/h approval: Optional at extra cost - Incl. vehicle documents Description: - Reinforced, stably bolted V-drawbar - Very stable aluminum frame - Frame is extremely torsion-resistant due to its solid construction - Floor panel made of Finnish multiplex - Numerous cross beams provide high point load capacity - Body made of robust 30mm insulated steel sheet sandwich panels - Outer layers; hot-dip galvanized, additionally powder-coated steel sheet - Roof: 25mm GRP sandwich - Double-leaf rear door with lockable stainless steel rod lock - Interior headroom: approx. 200 cm - Interior width: approx. 184 cm - 2x maneuvering handles at the front - Doors with special hard/soft plastic sealing profiles - Rear frame made of hot-dip galvanized steel, solidly welded - 4 internal recessed lashing rings in the floor (750 daN/kg) - Slot-hole lashing rail on both sides, height: 90cm - 100mm circumferential interior impact protection - Maintenance-free ALKO rubber torsion axles - Automatic reverse system - ALKO overrun device and parking brake - Plastic mudguards - 13-pin plug - Reversing lights - Large-dimension safety lighting - Integrated rear fog light - Rear-frame mounted recessed lighting - Central automatic jockey wheel Optional accessories available – please inquire: - Anti-theft device - Rear supports - 100km/h approval with shock absorbers - Side door - Motorcycle wheel chocks - Motorcycle rails - Motorcycle lashing straps - Additional lashing straps - Additional lashing rings - Additional slot-hole rails for tension belts and load bars - Lath rail with rubber coating for tension belts & load bars - Load bars, steel or aluminum - Interior lights - Reversing lights, and much more New vehicle with warranty and TÜV approval. We also offer tailored financing options! Descriptions and images are subject to copyright! Over 800 trailers available from stock! For more than 30 years: Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix – Authorized dealer & service workshop – delivery throughout Germany available at extra cost! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389, 46399 Bocholt Errors, omissions and prior sale excepted.

Durumu: yeni, boş ağırlık: 1.178 kg, azami yük ağırlığı: 2.322 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.000 mm, yükleme alanı genişliği: 1.700 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 12,9 m³, renk: gri, inşaat yüksekliği: 2.600 mm, çalışma genişliği: 2.240 mm, Hydraulics, automatic reversing system, hot-dip galvanization, * IMMEDIATELY AVAILABLE * VEZEKO VT 3500 RAMP/DOOR COMBINATION | DRIVE/BARRIER GATE CROSS PARTITION 400X170X190CM LIVESTOCK TRAILER RAMP RUBBER 3X VENTILATION INTERIOR LIGHTING TECHNICAL SPECIFICATIONS: - Brand: Vezeko - Model: VT 3500 - Vehicle type: Livestock trailer - Vehicle condition: New vehicle - First registration: none - MOT / Inspection: 2 years from first registration - Internal dimensions (L x W x H): 400 x 170 x 190 cm - External dimensions (L x W x H): 572 x 224 x 260 cm - Floor loading height: 51 cm - Perm. gross weight: 3,500 kg - Unladen weight: 1,178 kg - Payload: 2,322 kg - Chassis: Low-bed trailer (wheels beside body) - Tyres: 185R14C - Suspension: AL-KO rubber torsion axle - Jockey wheel: Yes, automatic - 100 km/h approval: Optional, retrofittable EQUIPMENT: - Brakes: Yes - Number of axles: 2 - Floor: Aluminium chequer plate pan on multiplex wood - Wall material: Aluminium, double-walled, anodized - Roof material: Tarpaulin - Number of animals: 2 - Suitable for livestock types: Sheep, goats, small animals, cattle, calves, pigs - Overrun brake: AL-KO - Galvanization: hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Mudguards: Aluminium chequer plate - Standing area: 6.8 m² - Double deck: No - Dividing gate: Yes - Internal cross partition: Yes - Windows: Side sliding windows with bars - Front exit: No - Rear door/flap material: Aluminium with rubber covering and anti-slip strips - Interior light: Yes, at rear - Rear lighting: Incandescent bulbs, recessed in side bars - Side lights: Lane marker lights at rear - Lighting connector: 13-pin - Vehicle documents: EC Certificate of Conformity (COC) DESCRIPTION: - Aluminium chequer plate pan, bent and welded on film-coated plywood floor - Reinforced, solidly bolted V-drawbar - Very stable welded steel frame - Frame completely hot-dip galvanized by immersion - Many cross members for high point load resilience - Aluminium walls, anodized, double-walled, 25mm - Tie-up facility with rod and 3 tie rings - Access door on right side (in driving direction), with 2 robust toggle latches - Massive, hot-dip galvanized welded tarpaulin frame - Vent opening at the front - 2 side bars for additional stability - Vent openings, one pair, left and right, barred from inside - Rear portal, continuously welded, hot-dip galvanized, heavy-duty design - Rear flap with lid - door combination - Interior light at rear with switch - Rear tarpaulin completely closed over tailgate, fitted with tensioning rubber - Non-slip rubber on the loading ramp with integrated anti-slip strips - Swinging aluminium drive barrier gate 1400mm at the rear - Cross partition 1400mm, aluminium, infinitely adjustable - Maintenance-free AL-KO rubber suspension axle - Automatic reversing system - AL-KO overrun device and handbrake - 13-pin plug - Reversing lights - Large-size safety lighting - Integrated rear fog light - Lane marker lights fitted at rear - Automatic jockey wheel, centrally mounted Accessories can be retrofitted - just ask: - 100km/h approval with shock absorbers - Reversing lights - Tool box New vehicle with warranty and MOT. We are happy to offer you suitable financing! Descriptions and images are protected by copyright!! Over 800 trailers immediately available in our stock! For over 30 years: Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist deal Lredpfx Aju Ht A Deiqek

Durumu: yeni, boş ağırlık: 695 kg, azami yük ağırlığı: 2.005 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.550 mm, yükleme alanı genişliği: 1.520 mm, yükleme alanı yüksekliği: 1.930 mm, yükleme alanı hacmi: 10,3 m³, renk: siyah, inşaat yüksekliği: 1.930 mm, çalışma genişliği: 2.030 mm, Hydraulics, automatic reversing mechanism, hot-dip galvanized, unbraked, tandem with 30mm steel sheet sandwich construction walls, braked, 2 lashing rails, 4 lashing rings, * IMMEDIATE AVAILABILITY * tandem with 30mm steel sheet sandwich structure walls, braked, 2 lashing rails, 4 lashing rings Technical Data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATE! - Permissible total weight: 2,700kg - Unladen weight: 695 kg - Payload: 2,005 kg - Internal dimensions: 355 x 152 x 193 cm (L x W x H) - Overall external dimensions: 515 x 203 x 193 cm (L x W x H) - Loading height: 59 cm - Tyres: 185R14C steel rim - Brakes: yes - Jockey wheel: yes - 100km/h approval: optional at extra charge - incl. registration documents Superstructure: - Floor: plywood, Finnish multiplex panel - Walls: 30mm steel sheet sandwich - Roof material: 25mm GRP sandwich - Chassis: ALKO rubber torsion axle - Number of lashing points: 4 pcs (750kg/daN each) - Rear door: yes, double-winged - Tailgate: no - Tailgate material: - - Tailgate/door function: bolt locking - Clearance dimension rear door/gate: - - Interior light: optional at extra charge - Support legs: optional at extra charge - Overrun device & brake: yes - Frame/chassis: V-drawbar, hot-dip galvanized bath - Lighting connector: 13-pin plug - Registration papers: COC documents Standard Equipment: - robust V-drawbar, hot-dip galvanized in immersion bath - tandem axle - ALKO overrun device - Finnish multiplex floor plate - side walls made of highly robust 30mm steel sheet sandwich - roof made of 25mm GRP sandwich - double-wing rear doors - doors with special sealing profiles made from hard/soft plastic - stainless steel bolt locking and galvanized hinges - rear frame and edging profiles made of special aluminum sections - 4 lashing points in the floor, pull force 750kg each - lashing rails fitted on both sides - automatic jockey wheel - automatic reversing mechanism - plastic mudguards - 13-pin plug - reversing lights - large-dimensioned safety lighting - integrated rear fog lamp - superstructure splashwater-proof - Registration documents: COC documents Optional Accessories on request: - anti-theft device - rear props - 100km/h approval with shock absorbers - side door - motorbike chocks - motorbike rails - motorbike lashing straps - additional lashing rings - additional slot-perforated rails for tie-down and shoring bars - stick rails with rubber cover for tie-downs and shoring bars - shoring bars, steel or aluminum - interior lights - reversing lights - and much more Lsdpsu Htknjfx Aiqsrk New vehicle with warranty and TÜV. We are happy to offer you suitable financing! Descriptions and photos are protected by copyright!! Over 800 trailers immediately available at our site! We have been your professional dealer and repair workshop for brands like Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years – delivery throughout Germany possible for an extra charge! Trailer Center BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, mistakes, and prior sale reserved.

Durumu: yeni, boş ağırlık: 830 kg, azami yük ağırlığı: 2.670 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.550 mm, yükleme alanı genişliği: 1.840 mm, yükleme alanı yüksekliği: 2.050 mm, yükleme alanı hacmi: 13,6 m³, renk: gümüş, inşaat yüksekliği: 2.670 mm, çalışma genişliği: 2.370 mm, Hydraulics, automatic reverse function, hot-dip galvanization, unbraked, tandem with 30mm steel sandwich construction walls, braked, 2 lashing rails, 6 lashing rings, *IMMEDIATELY AVAILABLE* Tandem with 30mm steel sandwich construction walls, braked, 2 lashing rails, 6 lashing rings Technical Specifications: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATE! - Permissible total weight: 3,500 kg - Unladen weight: 830 kg - Payload: 2,670 kg - Internal dimensions: 355 x 184 x 205 cm (L x W x H) - Overall external dimensions: 521 x 237 x 267 cm (L x W x H) - Loading edge height: 59 cm - Tyres: 185R14C steel rim - Brakes: yes - Jockey wheel: yes - 100 km/h package: available at extra cost - incl. vehicle documents Vehicle Body: - Floor: plywood, Finnish multiplex panel - Walls: 30mm steel sandwich - Roof material: 25mm GRP sandwich - Chassis: ALKO rubber torsion axle - Number of lashing rings: 6 pcs. (750kg/daN) - Rear door: yes, double-wing - Tailgate: no - Tailgate material: - - Tailgate/door function: rod lock - Passage opening rear door/tailgate: 179 x 200 cm - Interior lighting: available at extra cost - Stands: available at extra cost - Overrun device & brakes: yes, - Frame/chassis: V-drawbar, hot-dip galvanized - Lighting plug: 13-pin - Approval: COC documents Standard Equipment: - Reinforced, bolted V-drawbar - Very robust aluminium frame - Chassis is highly torsion-resistant due to its robust design - Floor panel made of Finnish multiplex - Numerous cross members for high point load capacity - Body made of extremely sturdy, insulated, 30mm steel sandwich - Surface layers made of hot-dip galvanized and additionally powder-coated steel sheet - Roof made of 25mm GRP sandwich - Double-wing rear door with stainless steel rod lock, lockable - 2x manoeuvring handles at front - Doors with special seal profiles made of hard/soft plastic - Rear frame made from hot-dip galvanized steel, solidly welded - 6 internal recessed lashing points in the floor (750 DaN/kg) - Both sides fitted with slotted-hole lashing rails, h = 90 cm - 100 mm edge protection around interior - Maintenance-free ALKO rubber suspension axles - Automatic reverse function - ALKO overrun device and parking brake - Plastic mudguards - 13-pin plug - Reversing lights - Large, high-visibility safety lighting - Integrated rear fog lamp - Lighting recessed into rear frame - Automatic jockey wheel centred - Registration papers: COC papers Optional Accessories (on request): - Anti-theft device - Rear supports - 100 km/h approval with shock absorber - Side door - Motorcycle wheel chocks - Motorcycle rails - Motorcycle tie-down straps - Additional lashing rings - Additional slotted-hole rails for tie-down straps and cargo bars - Moulding rail with rubber coating for tie-down straps and cargo bars - Load bars steel or aluminium - Interior lights - Reversing lights - and much more New vehicle with warranty and TÜV. Financing options available! Descriptions and images are copyright protected!! Over 800 trailers available immediately! We have over 30 years’ experience as specialists and service partners for Brian James, Humbaur, Hapert, Unsinn, Cheval Liberté, Koch, Debon, Stedele, TPV, Tohaco, Vezeko, Variant, Vlemmix. Workshop & repairs. Nationwide delivery in Germany available for an extra charge! Lrsdpfju Htnasx Aiqok Anhaenger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Subject to error, omission, and prior sale.

Durumu: yeni, boş ağırlık: 1.315 kg, azami yük ağırlığı: 2.185 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 2.470 mm, yükleme alanı genişliği: 1.780 mm, yükleme alanı yüksekliği: 1.050 mm, yükleme alanı hacmi: 5 m³, renk: gümüş, inşaat yüksekliği: 1.740 mm, çalışma genişliği: 1.860 mm, E-hydraulics / Radio Remote Control / 105 cm High Galvanized Steel Tipper Body, Auto-Reverse, Hot-Dip Galvanized, Roof Window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / Radio Remote Control / 105 cm High Galvanized Steel Tipper Body Technical Specifications: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATE! - Permissible total weight: 3,500 kg - Unladen weight: 1,315 kg - Payload (with tipper body): 2,185 kg - Internal dimensions: 247 x 178 x 105 cm (L x W x H) - Overall external dimensions: 397 x 186 x 174 cm (L x W x H) - Tyres: 195/50R13C steel rims - Brakes: Yes - Jockey wheel: Yes, reinforced automatic - 100 km/h: Available at extra cost - Incl. vehicle documents Vehicle Construction: - Floor: None / chassis only - Side walls: None / chassis only - Side wall height: - - Chassis: Low loader, ALKO rubber suspension axle - Tipping function: Hooklift - Hydraulics: Electric with radio remote control - Tipping angle: -- - Hydraulic cylinder stages: 1 stage - Overrun device & brake: ALKO - Frame/chassis: Welded steel frame, dark painted - Superstructure: incl. 1x 105 cm galvanized steel tipper body - Lashing eyes: none - Supports: none - Ramps: none - Lighting plug: 13-pin - Approval: COC documents Standard Equipment: - Very robust welded steel frame - Frame fully dark painted - Additional longitudinal beams fully welded - E-hydraulic tipping system with battery box - Radio remote control - Hooklift system for containers, flatbeds or box bodies - Auto reverse system - ALKO overrun device and parking brake - Rear ramp for tilted operation - Long lever latches - Very robust bolted reinforced V-drawbar - 13-pin plug - Reversing lights - Large-dimension safety lighting - Integrated rear fog light - Rear-frame integrated lighting - Central automatic jockey wheel - Registration documents: COC included INCLUDES ACCESSORIES: - 100 cm roll-off tipper container, galvanized (immediately available!) ALTERNATIVE OPTIONS: - Additional 100 cm roll-off tipper container, galvanized, for a surcharge (immediately available!) - 40 cm roll-off tipper container, galvanized, for a surcharge Lrsdpfx Aeu Hr Edoiqok - 60 cm roll-off tipper container, galvanized, for a surcharge - Roll-off flatbed with side walls, for a surcharge (immediately available!) Accessories available for retrofitting – please enquire: - Removable box body - Spare wheel - Battery - 230V charger - Flat tarpaulin - High tarpaulin - Net hooks - Additional lashing eyes - Reversing lights - Lashing straps - Much more New vehicle with warranty and TÜV. We gladly offer suitable financing options! Descriptions and images are protected by copyright! Over 800 trailers available from stock! For more than 30 years: Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix – Specialist Dealer & Repair Workshop – Nationwide delivery possible at extra cost! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted -

Durumu: yeni, boş ağırlık: 845 kg, azami yük ağırlığı: 1.855 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.050 mm, yükleme alanı genişliği: 2.040 mm, yükleme alanı yüksekliği: 2.050 mm, yükleme alanı hacmi: 17,2 m³, renk: siyah, inşaat yüksekliği: 2.690 mm, çalışma genişliği: 2.550 mm, Hydraulics, automatic reversing function, hot-dip galvanising, unbraked, tandem chassis with 30mm steel sheet sandwich construction, braked, 2 lashing rails, 8 lashing eyes, * IMMEDIATE AVAILABILITY * Tandem chassis with 30mm steel sheet sandwich construction, braked, 2 lashing rails, 8 lashing eyes Technical data: - Type: New vehicle - MOT: New/2 years - Availability: IMMEDIATE! - Permissible gross weight: 2,700 kg - Unladen weight: 845 kg - Payload: 1,855 kg - Internal dimensions: 405 x 204 x 205 cm (L x W x H) - External dimensions: 563 x 255 x 269 cm (L x W x H) - Loading edge height: 59 cm - Tyres: 185R14C, steel rims - Brakes: yes - Jockey wheel: yes - 100 km/h approval: at extra charge - incl. vehicle documents Body construction: - Floor: Finnish birch multiplex board - Walls: 30mm steel sheet sandwich - Roof material: 25mm GRP sandwich - Undercarriage: AL-KO rubber torsion axle - Number of lashing eyes: 8 pcs (750 kg/daN rated load per point) - Rear door: Yes, two-leaf - Rear tailgate: No - Tailgate material: - - Tailgate/door mechanism: Rod lock system - Rear door/tailgate clearance: - - Interior lighting: available at extra charge - Support legs: available at extra charge - Overrun device & brakes: yes - Chassis/frame: V-drawbar, hot-dip galvanised bath immersion - Lighting connector: 13-pin - Registration: COC documents Standard features: - Sturdy V-drawbar, hot-dip galvanised by immersion - Tandem axle - AL-KO overrun device - Floor panel made of Finnish multiplex - Sidewalls made of very robust 30mm steel sheet sandwich - Roof made of 25mm GRP sandwich - 2-wing rear door - Doors with special sealing profiles, made of hard/soft plastic - Stainless steel rod lock and galvanised hinges - Rear frame and edging profiles made of special aluminium extrusions - 8 lashing points on the floor, each with 750 kg load capacity - Lashing rails pre-installed on both sides of the trailer - Automatic jockey wheel Ledou Skryjpfx Aiqerk - Automatic reversing function - Plastic mudguards - 13-pin connector - Reversing light - Large-size safety lighting - Integrated rear fog light - Weather-resistant/sealed superstructure - Registration documents: COC papers Retrofit accessories available - please inquire: - Anti-theft device - Rear support legs - 100km/h approval with shock absorbers - Side door - Motorcycle wheel chocks - Motorcycle stand rails - Motorcycle lashing straps - Additional lashing straps - Additional lashing eyes - Additional slotted rails for tie-down straps & load bars - Rubber-coated lath rails for straps & load bars - Load bars (steel or aluminium) - Interior lights - Reversing lamps - and much more New vehicle supplied with warranty and MOT. We are happy to offer you a suitable financing option! Descriptions and images are protected by copyright!! Over 800 trailers available immediately on site! We are a certified specialist dealer and workshop for these brands for over 30 years: Brian James, Humbaur, Hapert, Unsinn, Cheval Liberte, Koch, Debon, Stedele, TPV, Tohaco, Vezeko, Variant, Vlemmix – Sales, repairs, workshop – Nationwide delivery available for a surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, omissions and prior sale excepted.

Durumu: yeni, boş ağırlık: 871 kg, azami yük ağırlığı: 1.829 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.200 mm, yükleme alanı genişliği: 1.600 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 9,7 m³, renk: gri, inşaat yüksekliği: 2.470 mm, çalışma genişliği: 2.050 mm, Hydraulics, automatic reverse, hot-dip galvanization, * IMMEDIATE AVAILABILITY * VEZEKO VT 2700 ALU RAMP-/DOOR-COMBINATION 320X160X190CM LIVESTOCK TRAILER RUBBER RAMP VENTILATION PEN BAR TECHNICAL DATA: - Brand: Vezeko - Model: VT 2700 - Vehicle type: Livestock trailer - Vehicle condition: New vehicle Lredeu Hrufepfx Aiqsk - First registration: Unregistered - TÜV/HU: 2 years from initial registration - Interior dimensions (LxWxH): 320 x 160 x 190 cm - Exterior dimensions (LxWxH): 464 x 205 x 247 cm - Loading height (floor): 51 cm - Permissible total weight: 2,700 kg - Curb weight: 871 kg - Payload: 1,829 kg - Chassis: Low-loader (wheels mounted beside the platform) - Tyres: 185R14C - Suspension: ALKO rubber torsion axle - Jockey wheel: Yes, automatic - 100 km/h approval: Optional, can be retrofitted EQUIPMENT: - Brakes: Yes - Number of axles: 2 - Floor: Aluminium tread plate pan on multiplex wood panel - Wall material: Aluminium, anodised, double-wall - Roof material: Tarpaulin - Number of animals: 2 - Suitable for: Sheep, goats, small livestock, cattle, calves, pigs - Overrun device/brake: ALKO - Galvanization: Hot-dip galvanised - Drawbar: V-drawbar, bolted, C-profile - Mudguards: Steel mudguards - Standing area: 5.1 m² - Double-decker: No - Sorting gate: Optional - Internal cross partition: Optional - Windows: Side sliding windows, grilled - Front exit door: No - Rear door/lid material: Aluminium, rubber-coated and with tread strips - Interior light: Optional, retrofittable - Rear lighting: Incandescent bulbs, lamps recessed in side struts - Side lighting: Lane-keeping indicators - 13-pin lighting connector - Vehicle documents: COC papers DESCRIPTION: - Aluminium tread plate pan edged and welded to phenolic wood floor - Reinforced bolted V-drawbar - Very sturdy welded steel frame - Frame fully hot-dip galvanised via immersion bath - Multiple cross beams for high point load capacity - 25 mm double-wall anodised aluminium side walls - Tie rail with bar and 3 tying rings - Access door on right side (in direction of travel) with 2 robust cam lever locks - Massive, hot-dip galvanised welded tarpaulin rack - Roll-up front ventilation flap in tarpaulin - 2 side struts for added stability - One pair of side ventilation openings, left & right, grilled from inside - Rear portal: Continuously welded, hot-dip galvanised, solid design - Rear tailgate with separate integrated flap (door combination) - Non-slip rubber mat on loading ramp with integrated tread strips - Removable pen bar extending in front of the rear ramp - Maintenance-free ALKO rubber torsion axle - Automatic reverse - ALKO overrun brake and parking brake - 13-pin connector - Reversing light - Large-dimension safety lights - Integrated rear fog light - Lane-keeping side lights fitted at rear - Central automatic jockey wheel Accessories available/retrofit—please inquire: - 100 km/h approval with shock absorbers - Sorting gate - Internal partition - Interior light - Reversing light - Storage box New vehicle with warranty and TÜV. Financing options available. Descriptions and images are protected by copyright!! Over 800 trailers available from stock! For more than 30 years: specialist dealer and workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix – Service, repairs and delivery possible Germany-wide for a surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, omissions and prior sale e

Durumu: yeni, boş ağırlık: 960 kg, azami yük ağırlığı: 2.540 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 5.420 mm, yükleme alanı genişliği: 2.090 mm, renk: gümüş, inşaat yüksekliği: 1.000 mm, çalışma genişliği: 2.150 mm, Hydraulics, reverse automatic, drive-on ramp, full aluminum floor / tridem / tiltable loading area / electric winch / wheel chock bar / spare wheel, fully hot-dip galvanized, * AVAILABLE IMMEDIATELY * incl. full aluminum floor / tridem / tiltable loading area / electric winch / wheel chock bar / spare wheel. Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATE! - Permissible gross weight: 3,500 kg - Unladen weight: 960 kg - Payload: 2,540 kg - Internal dimensions: 542 x 209 x 0 cm (L x W x H) - Total external dimensions: 725 x 215 x 100 cm (L x W x H) - Loading edge height: 61 cm - Tyres: 195/55R10C steel rim - Brakes: yes - Jockey wheel: yes, automatic - 100km/h approval: optional at extra cost - incl. vehicle documents Body structure: - Floor: full aluminum floor - Side walls: none - Side wall height: 0 cm - Chassis: platform trailer, AL-KO rubber suspension axle - Tipping function: yes - Hydraulics: manual hydraulics - Drive-on angle: approx. - Wheel stopper: adjustable wheel chock bar - Overrun device & brakes: AL-KO - Frame/chassis: welded steel frame, hot-dip galvanized - Lashing eyes: 14 pieces in the floor (750kg/each) - Winch: yes, electric with battery, winch post adjustable left and right - Supports: rear support - Ramps: not required, built-in drive-on wedges - Lighting connector: 13-pin - Registration: COC papers Standard equipment: - Tridem / 3-axle - Aluminum floor – extremely robust - Electric winch, movable left & right, as well as longitudinally adjustable - incl. 12V battery for winch - Weather protection cover for winch - 1 moveable wheel chock bar - Very sturdy welded steel frame - Tiltable loading area via manual hydraulics + 2 lift cylinders - Frame fully hot-dip galvanized by immersion - Multiple transverse beams for high point load - Additional continuous longitudinal reinforcements welded in - 14 lashing eyes inside the loading area, rubber-coated (750kg/each) - Reverse automatic - AL-KO overrun device and parking brake - AL-KO coupling head - Very robust reinforced V-drawbar - 13-pin plug - Reversing lamps - Large, dimensioned safety lighting - Integrated rear fog lamp - Swiveling lighting - Central automatic jockey wheel - Approval documents: COC papers Optional accessories – available on request: - 100km/h approval with shock absorbers - Anti-theft device - Tarpaulin body - Side walls - Additional wheel stoppers - Tool box - More lashing eyes - Reversing lights - Lashing straps Lrsdpfxou Hry Uo Aiqsk - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing options! Descriptions and images are copyright protected!! Over 800 trailers immediately available from us! For over 30 years, we have been a specialist dealer and service center for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix. Workshop and repairs – Germany-wide delivery available for an extra charge! Anhaenger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, mistakes, and prior sale excepted.

Durumu: yeni, boş ağırlık: 1.145 kg, azami yük ağırlığı: 2.355 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 2.470 mm, yükleme alanı genişliği: 1.780 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 1,8 m³, renk: gümüş, inşaat yüksekliği: 1.740 mm, çalışma genişliği: 1.860 mm, E-hydraulics / Radio remote control / Dropside body with 35 cm aluminium side panels, automatic reverse mode, hot-dip galvanizing, roof window, * IMMEDIATE AVAILABILITY * incl. e-hydraulics / radio remote control / platform body with 35 cm aluminium side panels. Technical Specifications: - Type: New vehicle - TÜV: New / 2 years - Availability: IMMEDIATE! - Permissible total weight: 3,500 kg - Unladen weight: 1,145 kg - Payload (with platform): 2,355 kg - Internal dimensions: 247 x 178 x 35 cm (L x W x H) - Overall external dimensions: 397 x 186 x 174 cm (L x W x H) - Tyres: 195/50R13C, steel rims - Brakes: Yes - Support wheel: Yes, reinforced automatic - 100km/h compliance: at additional cost - Incl. vehicle documents Body Structure: - Floor: None / chassis only - Side panels: None / chassis only - Side panel height: -- - Chassis: Low loader, ALKO rubber suspension axle - Tipping function: Hooklift - Hydraulics: Electric with radio remote control - Tipping angle: -- - Hydraulic cylinder stages: Single stage - Overrun brake & brake: ALKO - Frame/Chassis: Welded steel frame, dark painted - Attachment: Incl. 1x platform with aluminium side panels - Tie-down rings: Without - Supports: Without - Ramps: Without - Lighting plug: 13-pin - Registration: COC documents Standard Equipment: - Very robust welded steel frame - Frame completely dark painted - Additional continuous longitudinal members welded in - E-hydraulics for tipping, battery in box - Radio remote control - Hooklift for use with skip, platform or box bodies - Automatic reverse function - ALKO overrun device and parking brake - Rear loading flap for tilted operation - Long lever locks - Very robust, bolted, reinforced V-drawbar - 13-pin plug - Reversing light - Large safety lights - Integrated rear fog lamp - Rear frame recessed lighting - Automatic support wheel centrally positioned - Registration papers: COC documents INCLUDED ACCESSORIES: - Roll-off platform with 35 cm side panels (immediate availability!) ALTERNATIVELY: - Roll-off skip container 100 cm, hot-dip galvanized, at extra cost (immediate availability!) - Roll-off skip container 40 cm, hot-dip galvanized, at extra cost - Roll-off skip container 60 cm, hot-dip galvanized, at extra cost - Additional roll-off platform with side panels, at extra cost (immediate availability!) Optional accessories, available on request: - Detachable box body - Spare wheel - Battery - 230V charger - Flat tarpaulin - High tarpaulin - Net hooks Ljdpfxou Hr D Tj Aiqsrk - Additional tie-down rings - Reversing light - Lashing straps - And much more New vehicle with warranty and TÜV. We are happy to offer a tailored financing solution! Descriptions and images are protected by copyright!! Over 800 trailers immediately available from us! We have been official specialist dealers & service partners for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. Workshop and repair service. Delivery throughout Germany available for an additional charge! Trailer Center BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, omissions and prior sale excepted.

Durumu: yeni, boş ağırlık: 913 kg, azami yük ağırlığı: 1.787 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.050 mm, yükleme alanı genişliği: 2.040 mm, yükleme alanı yüksekliği: 2.050 mm, yükleme alanı hacmi: 17,2 m³, renk: siyah, inşaat yüksekliği: 2.690 mm, çalışma genişliği: 2.550 mm, Hydraulics, automatic reverse, hot-dip galvanization, unbraked, tandem trailer with 30mm steel sandwich panel construction, braked, 2 load securing rails, 8 lashing rings, * IMMEDIATE AVAILABILITY * Tandem trailer with 30mm steel sandwich panel construction, braked, 2 load securing rails, 8 lashing rings Technical Specifications: - Type: New vehicle - TÜV: New/2 Years - Availability: IMMEDIATE! - Permissible total weight: 2700kg - Unladen weight: 913kg - Payload: 1,787kg - Internal dimensions: 405 x 204 x 205 cm (L x W x H) - Total external dimensions: 563 x 255 x 269 cm (L x W x H) - Loading height: 59 cm - Tyres: 185R14C steel rim - Braking system: Yes - Jockey wheel: Yes - 100km/h approval: At extra cost - Including vehicle documents Body Construction: - Floor: Finnish plywood, multiplex panel - Side walls: 30mm steel sandwich panel - Roof material: 25mm GRP sandwich construction - Chassis: AL-KO rubber suspension axle - Number of lashing rings: 8 pcs. (750kg/daN) - Rear door: No - Tailgate: Yes - Tailgate material: Aluminium - Tailgate/door lock: Drop rod latch - Passage size rear door/tailgate: 199 x 199 cm - Interior lighting: Optional, extra charge - Props/supports: Optional, extra charge - Overrun brake & braking system: Yes - Frame/chassis: V-drawbar, hot-dip galvanized - Lighting connector: 13-pin - Registration: COC documents Standard Equipment: - Sturdy V-drawbar, hot-dip galvanized by full immersion - Tandem axle - AL-KO overrun brake - Floor made from Finnish multiplex - Sidewalls made from massive 30 mm steel sandwich panels - Roof made from 25mm GRP sandwich - 2-door rear opening - Doors with special sealing profiles (hard/soft plastic) - Stainless steel drop rod latch and galvanized hinges - Rear frame and edging profiles made from special aluminium profiles - 8 lashing points in the floor, tensile force 750 kg per point - Trailer equipped on both sides with pre-installed lashing rails - Automatic jockey wheel - Automatic reversing function - Plastic mudguards - 13-pin plug - Reversing lights - Large-dimensioned safety lighting - Integrated rear fog light - Splash-water protected superstructure - Registration documents: COC papers Included Special Equipment: - Aluminium loading ramp instead of rear wing door Optional accessories (on request, retrofittable): - Anti-theft device - Rear supports - 100km/h approval with shock absorbers - Side door Ledpfou Htgcex Aiqork - Motorcycle wheel chocks - Motorcycle rails - Motorcycle tie-down straps - Additional lashing straps - Additional lashing rings - Additional slot-hole rails for tie-down and load-securing bars - Rod rail with rubber coating for tie-down and load-securing bars - Load-securing bars in steel or aluminium - Interior lighting - Reversing lights - And much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing options! Descriptions and images are protected by copyright! Over 800 trailers immediately available from stock! We have been specialist dealers and service workshop for over 30 years for brands such as Brian James, Humbaur, Hapert, Unsinn, Cheval Liberte, Koch, Debon, Stedele, TPV, Tohaco, Vezeko, Variant, Vlemmix, and more. Nationwide delivery in Germany available at extra cost! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, omissions, and prior sale excepted.

Durumu: yeni, boş ağırlık: 775 kg, azami yük ağırlığı: 1.925 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.550 mm, yükleme alanı genişliği: 1.840 mm, yükleme alanı yüksekliği: 2.050 mm, yükleme alanı hacmi: 13,6 m³, renk: siyah, inşaat yüksekliği: 2.670 mm, çalışma genişliği: 2.370 mm, Hydraulics, automatic reversing system, hot-dip galvanizing, unbraked, tandem with 30 mm steel panel sandwich body, braked, 2 lashing rails, 6 lashing rings, * IMMEDIATELY AVAILABLE * Tandem with 30 mm steel panel sandwich body, braked, 2 lashing rails, 6 lashing rings Technical specifications: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATE! - Gross vehicle weight: 2700 kg - Unladen weight: 775 kg - Payload: 1,925 kg - Internal dimensions: 355 x 184 x 205 cm (L x W x H) - Overall external dimensions: 521 x 237 x 267 cm (L x W x H) - Load edge height: 59 cm - Tyres: 185R14C steel rims - Brake: yes - Support wheel: yes - 100km/h approval: on request at extra cost - Including vehicle documents Body details: - Floor: plywood, Finnish multiplex board - Walls: 30 mm steel sandwich panel - Roof material: 25 mm GRP sandwich - Chassis: ALKO rubber suspension axle - Number of lashing rings: 6 pcs (750 kg/daN) - Rear door: Yes, double-winged - Rear flap: No - Rear flap material: - - Rear flap/door function: Bolt lock - Passage dimension rear door/flap: - - Interior light: optional extra - Supports: optional extra - Overrun device & brake: yes - Frame/chassis: V-drawbar, hot-dip galvanized by immersion - Lighting connector: 13-pin - Approval: COC papers Standard equipment: - Sturdy V-drawbar, hot-dip galvanized by immersion - Tandem axle - Overrun device by ALKO - Floor panel made of Finnish multiplex - Side walls made of heavy-duty steel sandwich panel, 30 mm thick - Roof made of 25 mm GRP sandwich - Double-wing doors at the rear - Doors with special sealing profiles of hard/soft plastic - Stainless steel bolt lock and galvanized hinges - Rear frame and edging profiles made from special aluminum sections - 8 lashing points in the floor, lashing capacity 750 kg per point - Trailer fitted on both sides with lashing rails - Automatic support wheel - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing light - Large, heavy-duty safety lighting - Integrated rear fog light - Body: splash-proof - Registration documents: COC papers Retrofittable accessories - available on request: - Anti-theft device - Rear supports - 100 km/h approval with shock absorbers - Side door - Motorcycle wheel chocks - Motorcycle stand rails - Motorcycle tie-down straps - Lashing straps - Additional lashing rings - Additional slotted rails for tie-down straps & blocking bars - Lath rails with rubber coating for tie-down straps & blocking bars - Blocking bars in steel or aluminum - Interior lighting - Reversing light - and much more. Lsdeu Htk Uopfx Aiqsrk New vehicle with warranty and TÜV. Tailored financing options available! Descriptions and images are copyright protected! Over 800 trailers immediately available from stock! We have been specialist dealers and repair workshop for over 30 years for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix. Nationwide delivery in Germany available at additional cost! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, omissions, and prior sale excepted.

Durumu: yeni, boş ağırlık: 405 kg, azami yük ağırlığı: 895 kg, toplam ağırlık: 1.300 kg, yükleme alanı uzunluğu: 2.850 mm, yükleme alanı genişliği: 1.570 mm, renk: gümüş, inşaat yüksekliği: 1.020 mm, çalışma genişliği: 2.060 mm, Full-surface loading floor / Wide loading ramp / 2x motorcycle wheel chock, *IMMEDIATELY AVAILABLE* incl. full-surface loading floor / wide loading ramp / 2x motorcycle wheel chock. Technical Specifications: - Brand: Vezeko - Model: Motovan B13 - Vehicle type: Motorcycle trailer - Vehicle condition: New vehicle - First registration: None - TÜV/MOT: 2 years from initial registration - Internal dimensions (L x W x H): 285 x 157 x 0 cm - External dimensions (L x W x H): 402 x 206 x 102 cm - Loading height of the floor: 45 cm - Permissible total weight: 1,300 kg - Kerb weight: 405 kg - Payload: 895 kg - Chassis: Low loader (wheels beside the body) - Tyres: 165R13C - Suspension: ALKO rubber torsion axle - Jockey wheel: Yes - 100km/h approval: Optional, retrofittable Body: - Brakes: Yes - Number of axles: 1 - Floor: Steel sheet - Loading area: Fully enclosed loading floor - Side panels: - - Side panel height: 0 cm - Number of motorcycles: 2 - Tilting / lowering function: None - Hydraulic pump: - - Charging function battery: - - Overrun brake: ALKO - Frame/chassis: Welded steel frame - Galvanisation: Hot-dip galvanised - Drawbar: Continuous V-drawbar, square tube - Mudguards: Plastic mudguards - Spare wheel: Optional, retrofittable - Motorcycle chock: Yes - Ramp compartment: No - Ramp/loading ramp: Yes - Ramp angle: approx. 14° - Supports: Optional, retrofittable - Lashing rings: 14 - Rear lighting: Bulb type - Side lighting: - - Electrical connector: 13-pin - Vehicle documents: COC papers DESCRIPTION - Perforated steel floor, extremely robust - Perforated profile within the loading floor for lashing Lrsdpfxju Hta Nj Aiqsk - 2x freely positionable motorcycle wheel chocks - Very stable welded steel frame - Fully hot-dip galvanised frame by immersion process - Continuous double-folding rear ramp - Low-profile chassis with shallow ramp angle - 14 lashing rings mounted to the frame - Highly robust reinforced V-drawbar - Automatic reverse mechanism - ALKO overrun device and handbrake - ALKO coupling head - 13-pin connector - Reversing light - Large, high-visibility safety lighting - Integrated rear fog light - Centrally mounted automatic jockey wheel Retrofittable accessories – please enquire: - 100 km/h approval with shock absorbers - Anti-theft lock - Storage box - Reversing light - Lashing straps - and much more New vehicle with warranty and TÜV. Financing options available! Descriptions and images are copyrighted! Over 800 trailers immediately available! For over 30 years - Official dealers and repair workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix. Delivery available throughout Germany at extra cost! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Subject to errors, omissions, and prior sale -

Durumu: iyi (kullanılmış), Kondenstop, basınç düşürücü vana, buhar kapanı, vana, çekvalf, kontrol vanası -Üretici: Bekomat Ecoair, buhar kapanı tipi KA02 ACO AO / AK 05 -Voltaj: 230VAC/50Hz -Sıcaklık: +1°C/+60°C -Nominal basınç: maks. 16 bar -Miktar: 3x mevcut -Fiyat: adet başına Lredpfevuzpkox Aiqok -Taşıma boyutları: 220/140/H150 mm -Ağırlık: 1,6 kg/adet.

Durumu: kullanılmış, Üretim yılı: 1968, Roller diameter: 500 mm Throat depth: 1050 / 485 mm Workpiece height: 300 mm Saw blade length: 3920 - 4050 mm Cutting speed: 15 - 940 m/min Table height: 1040 mm Table dimensions: 750 x 800 mm Ledpfx Asiqp Ereiqjrk Table tilt: 15 degrees Total power requirement: 4.0 kW Machine weight: approx. 1750 kg Space requirement: approx. 2100 x 1000 x 2100 mm - Unique mitre range left/right up to 30° acute angle - Mitre adjustment via lockable indexing every 15° - Saw blade adjustable for optimal cutting angle - Hydraulic vise, on both sides - Electric blade breakage monitoring - Smooth-running saw carriage on preloaded linear ball guides - Additional table 450 x 450 mm - Machine lamp

Durumu: kullanılmış, Üretim yılı: 2013, makine/araç numarası: HF 130: 0130410, toplam ağırlık: 1.910 kg, iç uzunluk: 5.000 mm, iç genişlik: 2.159 mm, toplam uzunluk: 6.530 mm, toplam genişlik: 2.480 mm, toplam yükseklik: 3.640 mm, dönüş hızı (maks.): 1.400 dev/dak, güç: 1,5 kW (2,04 bg), Teknik Veriler Kapasite: 15cbm Boş ağırlık: 1910kg Şanzıman tipi: Çift şanzıman 063/130 Üretici: HF lnventer Elektrikli motor gücü: l,SkW Motor devir sayısı: 1400 rpm Şanzıman oranı: 1/400 Seri numarası: HF 130: 0130410 NMRV063: 708271842 Lrsdpfx Aier Dridoqok Güç kaynağı: 400 VAC Zincir sıyırıcı: 168-1 Z=22 Çekme kuvvetinin kaldırılması: Rulman seti UCP207, 2 adet. Kaplin: Evet, LC170 l 1tk Zincir sıyırıcı: 168-1 Z=25 Genleşme milini sökün: UCT207 Rulman seti 61, 2 adet. Bölme tespiti: UCP204 Rulman seti, 2 adet Silindir sayısı: 10 Tosk tipi: 6006

Üretim yılı: 2025, Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 1, Electric Concrete Grinders Our concrete and terrazzo grinders are multifunctional and meet the expectations of every customer, even the most demanding. The terrazzo grinder is made from the highest quality materials, guaranteeing long-term durability. We understand perfectly well that a floor grinder for concrete surfaces must be efficient and reliable, and the concrete grinders we offer are just that—they have proven themselves in a variety of customer applications. Your satisfaction is paramount, which is why we only offer proven and well-regarded solutions. How to grind concrete or terrazzo? Definitely with a grinder from our store! Concrete grinders—for dry and wet work They are equipped with a 2.2 kW (also 3 kW) / 230 V engine, 120 rpm and a cylindrical gearbox. They are compatible with kidney-shaped grinding plates—available in 400 mm or 500 mm. Some models include a water tank, which can be used to adjust the machine’s weight, as well as a quick connector for water supply. The entire machine is galvanized, features an LED lamp, and an adjustable handle for maximum operator comfort. The concrete floor grinder is also equipped with a safety switch, indicator lights, and two outlets for vacuum connection. In short, it is ideal for use with corundum blocks, diamonds, as well as for grinding concrete floors, cleaning, renovating old concrete, and grinding terrazzo. WE MANUFACTURE: Electric concrete grinders made by Dekor PUHB Poznań. Disc diameter: 405 mm or 500 mm. Various grinding discs can be fitted, including those produced by Dekor. Engine: 2.2 kW/230V. Entire construction is galvanically zinc-coated. Suitable for dry or wet operation. Can connect to a vacuum cleaner. Wide handle adjustment range. Diameter: 405 mm, 120 rpm. Grinding disc is not included. We have a wide selection of discs, which we sell separately (complete with prices and photos on our website). We also offer diamond segments directly from the diamond and segment manufacturer—large selection—including segments for scabbling floors before applying resin and universal diamond mounting plates … Net prices: Grinder SD40 1.5 kW/230 V — price – 6,400.00 PLN Grinder SD40 2.2 kW/230 V – 6,900.00 PLN Grinder SD50 2.2 kW/230 V — price – 8,000.00 PLN Grinder SD50 3.0 kW/230 V (+larger gearbox), 56 kg – price – 8,900.00 PLN (long handle) - Universal disc 400/5, stainless steel - 480 PLN - 500/5 disc, stainless steel - 520 PLN Lodpfswt Dqmox Aiqerk Expansion joint grooving machine (4+2 wheels) – 4,100.00 PLN (milling cutter included) Expansion joint grooving machine (2+1 wheels) – 3,150.00 PLN (milling cutter included) – Diamond with 4 segments "16", ø100, mounted on M8 or M10 screw – 70.00 PLN – Diamond "16", mounted on 3 M6 screws with 2 rectangular segments – 65 PLN – Diamond "16", mounted on 3 M6 screws with 3 square segments – 70 PLN – Diamond "16", HTC slide-in mounting, with 2 diamonds – 70 PLN – Cup wheel ø100, M14 thread, double-row or turbo – 62 PLN – Cup wheel ø125, M14 thread, double-row or turbo – 72 PLN ALL diamonds are made FOR US, to our order, by a company that is a producer of crystalline diamonds and manufactures the segments we request for grinding. PLEASE SEND INQUIRIES BY E-MAIL

Üretim yılı: 2025, Durumu: yeni, The lightweight cordless power trowel (11 kg) is a practical and convenient machine designed for finishing small concrete surfaces, including hard-to-reach areas. It is also suitable for grinding, cleaning, polishing, and smoothing concrete on vibration tables. We manufacture both single-speed and two-speed versions. We have been manufacturing power trowels for over 25 years. FOR THE FASTEST RESPONSE, PLEASE CONTACT US BY EMAIL. Currently, we produce 11 types of trowels, both 230V electric and battery-powered models. Our extensive experience covers thousands of square meters of flooring, giving us a deep understanding of what flooring contractors need and what can ease the demanding work of flooring professionals. We highly value user feedback and implement improvements rapidly. Our production process is based on the Kaizen methodology, a Japanese philosophy meaning "change for the better" (where "kai" means change and "zen" means better). This approach emphasizes continuous improvement through systematic implementation of small, regular changes that lead to gradual but lasting enhancements. As a result, our products are durable and user-friendly. Our trowels can be used for disc-floating concrete, smoothing with crossbars equipped with steel or plastic blades, diamond or corundum grinding, bush hammering, cleaning old concrete with brushes, restoring old surfaces to like-new condition, and polishing terrazzo stairs and floors. In addition, we manufacture special universal plates that can accommodate a variety of our tool attachments. Goods can be shipped by cash on delivery, prepayment, or collected in person in Poznań. Our float discs are made exclusively from high-grade 3mm black or stainless steel sheet. Net prices: - Lightweight cordless trowel (Vander), two-speed + electronic speed adjustment (Vander) – 3350.00 PLN - Lightweight cordless trowel, single-speed with variable speed control – 2900.00 PLN - Handheld cordless trowel, two-speed (Vander) + electronic speed control – 1450.00 PLN Lrsdpjwt Iq Dsfx Aiqsk - Handheld cordless trowel, with variable speed control, complete set – 920.00 PLN - "400" disc included in the set. We operate 24/7. Feel free to email us at any time. We ship via COD, prepayment, or personal collection in Poznań.

Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2025, makine/araç numarası: 1, Beton için ince donatı dağıtıcısı üretiyoruz. Pnömatik iletim. Yüksek performanslı üfleme sistemi. Bu makine, farklı işletmelerde yaygın olarak tercih edilmekte ve VAZGEÇİLMEZDİR. Donatının hassas ve düzgün bir şekilde dağıtılmasını sağlar. YENİ, GELİŞTİRİLMİŞ BİR VERSİYON ÜRETTİK. Ağ, daha büyük cisimlerin (karton, torba gibi) hazneye düşmesini engeller ve bir titreşim cihazı gereksiz hale gelir, ancak istenirse entegre edilebilir. Kullanımı ve taşınması pratiktir. Betonda "kirpi" oluşumunu önler. Donatının, liflerin ve plastikleştiricinin doğrudan beton mikserine beslendiği beton santralleri veya şantiyelerde kullanım için uygundur. Taşıması kolaydır. Makine; tekerlekli bir fan, 5,5 kW/400 V motor, donatının yerleştirildiği bir ağ, 14 cm çapında (iki parçalı – taşınması kolay) bir taşıma borusu, 2 adet 90 derece dirsek ve boruyu taşıyan iki çubuktan oluşan bir son dirsekten oluşur. Ledpfx Aiswt Hfajqork Bu dağıtıcı, kolayca sökülebilen fakat yüksek dayanıklılık sunan birçok uzun ömürlü segmentten oluşur. Hasar veya aşınma durumunda, her bir parça kolayca ve uygun maliyetle değiştirilebilir. Buna rağmen çok sağlamdır. Mümkün olan her yerde, aynı tip flanşlarla bağlantı yapmaya çalıştık. Pratikte, yalnızca iki tür flanşımız var – birisi borular için (yuvarlak), diğeri ise makine parçalarını birbirine bağlayan dikdörtgen şekildedir. ARTIK BORU VE DİRSEKLERİ 3,8 mm KALINLIĞINDA ÇELİKTEN ÜRETİYORUZ. Boru ve dirsekler, çok delikli bir flanş sayesinde farklı yönlere döndürülebilir. Ekstra tekerlekler (ayrıca satılır) hortumların sökülmesine gerek kalmadan dağıtıcının taşınmasını ve ekipmanın hareketini kolaylaştırır. İki teker seçeneği – ayarlanabilir yükseklikli veya sabit yükseklikli. Ayrıca teker iz genişliğini artırdık, böylece makinenin stabilitesi arttı. Dağıtıcıyı sabit olarak bir tesise de kurabiliyoruz. Yüksek fan verimi (5,5 kW/400 V), cihazın çok amaçlı kullanılmasına ve uzun mesafelere malzeme taşınmasına olanak tanır. İki operatörle bir beton mikserinin dolumu yaklaşık 3 dakika sürer. Besleme ağzı altına harici bir vibratör monte etmek mümkündür, fakat çalışma sırasında bu gerekmemektedir. Net fiyat – 14.000,00 PLN veya mevcut PLN/EUR kuru (set şunları içerir: üfleme cihazı, 2 + 1 dirsek, dikey boru, son dirsek, boru takviye elemanları).

Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2025, makine/araç numarası: 1, Beveling Milling Machine for Chamfering Contraction Joints in Concrete Floors and Cutting Grooves in Concrete. On 4 wheels +2 with a 125 mm milling cutter. Mounted on four wheels. Can be connected to a vacuum cleaner. Fully galvanized body, stainless steel guard. Vacuum outlet. Enables chamfering contraction joints. Equipped with a powerful, professional-grade motor. Large milling depth adjustment (up to 30 mm) and adjustable handle. Front and rear guides that run inside the joint ensure precise guidance of the cutter and allow for changing the milling angle, thus the milling width. Wide adjustment range for the handle tilt. 125 mm milling cutter included. Net price – 4,100.00 PLN (EUR 976) PLEASE SEND INQUIRIES PREFERABLY BY E-MAIL Beveling Milling Machine for Chamfering Contraction Joints in Concrete Floors, on 4 wheels +2 with a 180 mm milling cutter Mounted on four wheels. Can be connected to a vacuum cleaner. Fully galvanized body, stainless steel guard. Vacuum outlet. Enables chamfering contraction joints. Equipped with a powerful, professional-grade motor. Large milling depth adjustment (up to 40 mm) and adjustable handle. Front and rear guides that run inside the joint ensure precise cutter guidance when beveling, and allow for changing the milling angle, thus the milling width. Wide adjustment range for the handle tilt. 180 mm milling cutter included. Net price – 4,800.00 PLN (EUR 1,143) Net prices: Contraction Joint Cleaning Machine (without grinder) - 900.00 PLN (EUR 214) Contraction Joint Milling/Cleaning Machine (two functions) - 3,250.00 PLN (EUR 774) As above, galvanized + powder-coated - 3,400.00 PLN (EUR 810) As above, with handle-mounted switch - 4,200.00 PLN (EUR 1,000) As above, additional powder-coating - 4,350.00 PLN (EUR 1,036) Concrete Milling Machine on 4 wheels (125 mm "V" cutter included) - 4,100.00 PLN (EUR 976) Milling Machine on 4 wheels +2, for deep milling, up to 30 mm, "V" 125 mm cutter - 4,200.00 PLN (EUR 1,000) Milling Machine on 4 wheels +2, for deep milling, up to 40 mm (180 mm "V" cutter) - 4,800.00 PLN (EUR 1,143) Additional 125 mm "V" cutter - 290.00 PLN (EUR 69) Additional 180 mm "V" cutter - 540.00 PLN (EUR 129) 200 mm cutter - 440.00 PLN (EUR 105) Contraction Joint Cord Insertion Tool, 8-10 mm - 370.00 PLN (EUR 88) Contraction Joint Cord Insertion Tool, 10-12 mm - 390.00 PLN (EUR 93) Contraction Joint Cord Insertion Tool, above 12 mm - 420.00 PLN (EUR 100) Side Cord Insertion Tool (for wall proximity) - 390.00 PLN (EUR 93) All listed items are in stock. We manufacture concrete milling machines with 125 mm and 180 mm cutters for chamfering contraction joints, widening cracks in damaged concrete floors, and for cutting grooves in concrete floors (including for underfloor heating installation). Lsdpfx Aiswuvm Aoqsrk We operate 24/7 We ship COD, prepayment, or pickup in Poznań. Please contact us via e-mail.

Üretim yılı: 2025, Durumu: yeni, We have been manufacturing power trowels for over 25 years. Currently, we produce trowels in 11 types, available in both 230V electric and battery-powered versions. Having completed thousands of square metres of flooring in the past, we understand what flooring contractors need and which solutions can make difficult jobs easier for professionals in the industry. We truly value user feedback and implement improvements swiftly. PREFERRED CONTACT: E-MAIL Our manufacturing process is based on the Kaizen method. Kaizen, meaning 'change for the better' in Japanese ('kai' – change, 'zen' – good), is a management philosophy focused on the continuous improvement of company processes and operations. It involves introducing small but regular improvements, resulting in lasting, incremental progress. This approach makes our products durable and user-friendly. Our trowels can be used with discs for concrete finishing, blade attachments with metal or plastic edges for smoothing, diamond or corundum tools for grinding, bush-hammering, cleaning old concrete with brushes, or even restoring the surface to an as-new appearance; terrazzo steps and floors can also be ground with our machines. We also manufacture special universal plates compatible with many accessories from our tool range. Goods can be shipped on a cash-on-delivery or prepayment basis, or collected personally in Poznań. Lredpswt H Tdsfx Aiqok Our troweling discs are made exclusively from 3 mm premium-grade steel or stainless steel sheet. Our product portfolio includes electric concrete trowels. Many professionals have already experienced their reliability and proven performance, even in demanding conditions or confined areas with limited workspace. Product Overview: 1. Trowel ZDJ60E 1.1 kW, galvanized, disc included, standard handle, rectangular guard (33 kg) – 3,450.00 PLN (powder-coated version available for an extra 120 PLN) 2. Trowel ZDJ60E 1.1 kW, galvanized, disc included, rectangular guard, with extendable and detachable handle – 3,550.00 PLN 3. Trowel ZDJ60E 1.1 kW, with round guard, standard handle, galvanized, disc included – 3,650.00 PLN (powder-coated version available for an extra 120 PLN) 4. Trowel ZDJ60E 1.1 kW, with round guard, extendable and detachable handle – 3,650.00 PLN 5. Trowel ZDJ60E 1.5 kW, disc included (33 kg without disc) – 3,750.00 PLN (additional LED lamp on motor +100 PLN) 6. Trowel ZDJ60E 1.5 kW, with round guard, disc included – 3,850.00 PLN (powder-coated version available for an extra 120 PLN) 7. 1.1 kW Trowel for precast elements (27 kg/31 kg), disc included – 3,750.00 PLN 8. Trowel for precast elements, disc included, 35 kg – 3,680.00 PLN 9. NAC trowel, lightweight, two gear speeds + electronic speed control, small disc included – 3,350.00 PLN Motor: 1.1 kW / 230V. 120 rpm. Galvanized. Handle with extensive adjustment, extendable and fully detachable. LED lamp, indicator lights, safety switch. Compatible with 60/70/75 cm discs, as well as stones for grinding concrete and terrazzo, and wire brushes. 600 mm disc included. We operate 24/7. Please write to our e-mail.

Durumu: yeni, Üretim yılı: 2025, Fonksiyonellik: tamamen fonksiyonel, giriş voltajı: 400 V, We have been manufacturing pneumatic conveyors for over 20 years, suitable for handling bulk materials such as seeds, grain, peas, corn, as well as conveying wood pellets, sawdust, plastic granulates, sand, and abrasive powders—even corundum and dispersed steel fibers for feeding concrete mixers or use in concrete batching plants. These systems can also be used for aerating various materials, including hay, cereals, herbs, and more. It is also excellent for supplying fresh air into production halls, poultry houses, and cowsheds, as well as for extracting smoke, dust, and harmful welding gases. The system allows for the use of flexible hoses. Our high-performance blower features a 5.5 kW/400V motor. The robust, sectional construction is made from high-grade steel. Pipes and bends are crafted from 3.6 mm thick steel, allowing you to transport even the most challenging materials with excellent durability. We can also supply lightweight and heavy-duty flexible hoses for transporting the above-mentioned materials. Efficient at transporting materials even over longer distances (range depends on the material type). The powerful blower output enables both horizontal and vertical conveying. We have extensive manufacturing experience in this field. On request, we can manufacture some or all elements in STAINLESS or GALVANIZED versions (including pipes). Our production process follows the Kaizen method. Kaizen, meaning "change for the better" in Japanese ("kai" = change, "zen" = better), is a management philosophy and practice focused on continuous improvement of processes and company operations. PLEASE SEND INQUIRIES BY EMAIL FOR BEST RESPONSE. In the standard version, we sell just the blower with a flanged outlet for connecting various pipes. We manufacture steel pipes and bends from 3.6 mm thick steel. Impeller speed: 2800 rpm (OPTION: wide-range electronic speed control available from stock). Using three-phase motor speed controllers offers many benefits, including energy savings, precise torque adjustment, and increased overall system efficiency. Additionally, they reduce energy losses, further improving production efficiency. Our blowers are highly efficient. Lredpfow Aqamex Aiqok The machine is built from interchangeable modules (assembled with M8 screws), which we always have in stock. This allows for versatile customization and application. Individual modules are also available separately (e.g., the blower only). We can tailor the design to the customer’s requirements. The blower is easy to transport (can be moved by one person), and can be carried even with a small car, van, or trailer. Setup is simple, and operation is user-friendly. We also manufacture additional wheels for easier mobility (two types available). Net price for the basic set without electronic speed control: 10,300 PLN / EUR 2,453 Net price with electronic speed control: 13,400 PLN / EUR 3,190 Price for the blower only, without the feed hopper: 10,300 PLN / EUR 2,452 Price for a galvanized distributor (two pipe inlets) for air intake or exhaust (flanges with pipe mounting holes): 1,900 PLN / EUR 452 Price for a galvanized distributor (three pipe inlets) for air intake or exhaust (flanges with pipe mounting holes): 2,400 PLN / EUR 571 Optional wide-range electronic speed controller for the motor and blower: 2,900 PLN / EUR 690 For more information, please contact us by email. We operate 24/7.

Üretim yılı: 2025, Durumu: yeni, Hand-operated power trowel for finishing concrete floors is a practical tool for smoothing concrete in hard-to-reach areas. We manufacture two versions—single-speed and two-speed models. Available in 230V electric and battery-powered versions. Also excellent for terrazzo grinding on stairs. We have been producing power trowels for over 25 years. Currently, we offer 11 models: electric (230V) and cordless (battery powered). In the past, we have completed many thousands of square meters of floors and know exactly what flooring contractors need to make their demanding work easier. We value customer feedback and quickly implement improvements based on suggestions. PLEASE SEND INQUIRIES BEST BY EMAIL. Lodowt Ix Iopfx Aiqjrk In production, we use the Kaizen method. Kaizen, which means "change for the better" (in Japanese, "kai" means change and "zen" means for the better), is a management philosophy focused on continuous improvement of processes and company operations. It involves systematically introducing small, regular changes that lead to gradual, sustainable improvements. As a result, our products are durable and user-friendly. Our power trowels can be used for disc troweling concrete, finishing with cross blades (steel or plastic), diamond or corundum grinding, bush hammering, cleaning old concrete with brushes, and even restoring old surfaces to look freshly installed. Ideal also for grinding terrazzo steps and floors. We also produce special universal plates compatible with many of our tools. Goods can be shipped COD, by prepayment, or picked up in Poznań. Trowel discs are manufactured exclusively from premium 3 mm black steel or stainless steel sheets. Net prices: - Cordless hand trowel, two-speed (Vander) + electronic speed control – 1450.00 PLN - Cordless hand trowel with smooth speed control, complete set – 920.00 PLN - NAC hand trowel, lightweight, two-speed + electronic gear changing, small disc included – 3350.00 PLN - Hikoki hand trowel, 2 speeds (150–650 rpm) + electronic speed control, 1200W, with small disc – 1100 PLN - Hikoki hand trowel, 2 speeds (150–650 rpm) + electronic speed control, 1600W, with small disc – 1250 PLN - NAC hand trowel (USA), 2 speeds (180–400; 300–700 rpm) + electronic speed control, 1800W, with small disc – 1250 PLN - Single-speed hand trowel with small disc – 790.00 PLN - Single-speed hand trowel with small disc, 0–970 rpm, 2800W – 830.00 PLN - Hand trowel for concrete and plaster. VIBRATING. Vibrating plate 20x28 cm. Power 370W / 2840 vibrations – 750 PLN - Lightweight cordless trowel (Vander), two-speed + electronic speed control (Vander) – 3350.00 PLN - Lightweight cordless single-speed trowel with smooth speed control – 2900.00 PLN

Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2025, makine/araç numarası: 1, Beton, taş ve terrazzo zeminler için elmas taşlama segmentleri satıyoruz Paslanmaz çelikten ürettiğimiz 500/5 mm evrensel diskler üzerine, "16" tipi, 100 mm çapında ve 4 elmaslı (ve diğer modeller) elmas taşlama segmentleri çok sert betonların agresif taşlanması için montajlanabilir. Ayrıca farklı türlerde reçine bağlı korindon taşlama segmentleri de üretiyoruz. Geniş elmas yüzey alanı sayesinde segmentler ağır tip zemin taşlama makinelerinde, ayrıca kendi üretimimiz olan SD50, SD40 taşlama makineleri ile ZDJ60E perdah makinelerinde (hepsi 230V ile çalışır) kullanılabilir. Listedeki tüm elmas segmentler, tamamen bizim için ve siparişimize özel olarak kristal elmas üreticisi tarafından imal edilmektedir. Elmas taşlama segmentlerini (segmentlerin montajına uygun disklerle birlikte) satıyoruz. Ayrıca zemin kaplaması öncesinde (reçine, boya, seramik vb.) matlaştırma işlemleri için de segmentlerimiz mevcuttur. Net fiyatlar: Lrodpfx Aowuwunoiqsk – 4 segmentli "16" tipi elmas, fi 100, M8 veya M10 vida ile montaj – 70,00 PLN (17 EUR) – "16" tipi elmas, 3 adet M6 vidalı, 2 dikdörtgen segmentli – 70 PLN (17 EUR) – "16" tipi elmas, 3 adet M6 vidalı, 3 kare segmentli – 70 PLN (17 EUR) – "16" tipi elmas, HTC yerleştirme sistemiyle, 2 elmaslı – 70 PLN (17 EUR) – Çift sıralı veya turbo, fi 100, M14 dişli taşlama kabı – 62 PLN (15 EUR) – Çift sıralı veya turbo, fi 125, M14 dişli taşlama kabı – 72 PLN (17 EUR) – "V" tipi elmas freze fi 180 – 540 PLN (129 EUR) – "V" tipi elmas freze fi 125 – 198 PLN (47 EUR) – Elmas freze fi 200 – 470 PLN (112 EUR) – Paslanmaz çelikten, çift sıralı çarklı, komple matlaştırıcı uç – 160 PLN (38 EUR) – Paslanmaz çelikten, üç sıralı çarklı (fi 50 mm) komple matlaştırıcı uç – 220 PLN (52 EUR) – İki sıralı, rulmanlı sadece matlaştırıcı çark – 120 PLN (29 EUR) – Üç sıralı, rulmanlı, çap 50 mm matlaştırıcı çark – 160 PLN (38 EUR) - Paslanmaz evrensel disk 400/5 – 480 PLN (114 EUR) - Paslanmaz evrensel disk 500/5 – 520 PLN (124 EUR) - Ağır taşlama için reçineli böbrek segmenti – 40,00 PLN (10 EUR) - İki adet M6 civatalı taşlanabilir korindon-reçine taş segmenti – 40 PLN (10 EUR) - Taş bloğu "korindon/reçine" 80x160x100 mm (tane boyutu 1-3 mm; 3-5 mm; 5-8 mm) – 120,00 PLN (29 EUR) - "Korindon-reçine" taş (tane boyutu 1-3 mm; 3-5 mm; 5-8 mm), yaklaşık 6 kg, 100x100x270 mm – 190,00 PLN (45 EUR) Fiyatlar değişebilir. Burada listelenen tüm ürünlerimiz Poznan'daki depomuzda stokta mevcuttur, kapıda ödeme veya ön ödemeli olarak kargo gönderimi yapıyoruz, ayrıca Poznan'dan teslim alabilirsiniz. Sorularınızı mail yoluyla çekinmeden iletebilirsiniz. 7/24 hizmet vermekteyiz.

Üretim yılı: 2025, Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, For over 30 years, we have been manufacturing concrete power trowels, now available in 11 variants. We offer models for 230V mains power and battery-powered versions (battery and charger included), with single-speed and two-speed options. FOR FASTEST RESPONSE, PLEASE CONTACT US BY E-MAIL Lightweight trowel for resin and concrete, based on the American NAC drive. Two-speed drive plus smooth electronic speed control. First gear: 180–400 rpm. Second gear: 300–700 rpm. Power: 1800W. Compatible with a disc up to 48 cm, 50 cm spider with troweling blades and convex disc for finishing concrete in Heide parks (we manufacture such discs), bush hammer plate, polishing disc, and brush cleaning attachments. Wide handle adjustment, LED lamp, status indicators, safety switch, small disc included. Ideal for finishing concrete in hard-to-reach places, on balconies, in small rooms, and on vibration tables. Net prices: Lightweight battery-powered trowel (Vander), two speeds + electronic speed adjustment (Vander) – 3,350 PLN (EUR 798) Lightweight battery-powered trowel, single speed, with smooth speed control – 2,900 PLN (EUR 690) Handheld battery-powered trowel, two speeds (Vander) + electronic speed adjustment – 1,450 PLN (EUR 345) Handheld battery-powered trowel, with smooth speed control, complete – 920 PLN (EUR 219) NAC lightweight trowel, two speeds + electronic speed change, small disc included – 3,350 PLN (EUR 798) Handheld Hikoki trowel, two speeds (150–650 rpm) + electronic speed change, 1200W, small disc – 1,100 PLN (EUR 262) Handheld Hikoki trowel, two speeds (150–650 rpm) + electronic speed change, 1600W, small disc – 1,250 PLN (EUR 298) Handheld NAC (USA) trowel, two speeds (180–400; 300–700 rpm) + electronic speed change, 1800W, small disc – 1,250 PLN (EUR 298) Handheld single-speed trowel, small disc – 790 PLN (EUR 188) Handheld single-speed trowel, small disc, 0–970 rpm, 2800W – 830 PLN (EUR 198) Handheld trowel for concrete and plaster. VIBRATING. Vibrating plate 20x28 cm. Power 370W/2840 vpm – 750 PLN (EUR 179) TROWELING DISCS – Convex 38–42 cm, for Heide Parks – 200 PLN (EUR 48) 400/2.5 mm stainless steel disc – 230 PLN (EUR 55) 400/3 mm disc with rounded edge – 220 PLN (EUR 53) 47 cm/3 mm disc with rounded edge – 230 PLN (EUR 55) 47 cm/3 mm stainless steel disc – 260 PLN (EUR 62) Lredpswvhu Uefx Aiqsk 60 cm disc, stainless chrome steel (2.5 mm) – 310 PLN (EUR 74) 60 cm disc, 3 mm (no edge) – 250 PLN (EUR 60) '600' disc with hook-and-loop (for attaching sandpaper or polishing pads) – 350 PLN (EUR 83) 40–50 cm disc, without edge – 150 PLN (EUR 36) MOUNTING HEAD Ø160 mm, stainless, for attaching diamonds, brushes, bush hammer tools. Can be mounted to angle grinders, lightweight or handheld trowels – 350 PLN (EUR 83) Mounting head Ø215 mm, stainless, for attaching 6 diamonds, brushes, bush hammers. Can be mounted to angle grinders, lightweight or handheld trowels – 400 PLN (EUR 95) SPIDER with 6 arms, 3 mounting holes (50 cm) – 360 PLN (EUR 86) Blades or plastic inserts with 3 holes, 0.5 mm steel – 26 PLN (EUR 6) Blades or plastic inserts with 3 holes, 1.0 or 1.5 mm steel – 28 PLN (EUR 7) BUSH HAMMER – complete double-row stainless bush hammer attachment – 160 PLN (EUR 38) Feel free to email us! We operate 24/7.