Kullanılmış Carl Cloos Schweißtechnik Gmbh Glc 403 Pa-Ts satın al (73.694)

Koşul: iyi (kullanılmış), Üretim yılı: 1999, approx. 23 pieces OTTO hazardous goods containers, 600L, Large Packaging "IBC" – used -: Price per piece ex location: €395 (net)! Manufacturer: Otto Containersysteme GmbH Type: 11A/X/01/99/D/OTTO/BAM 0356/2556/1090 Serial number: 33782 Year of manufacture: 1999 Capacity: 600L Tank material: St. W 24 Maximum permissible gross mass: 1,090kg Own weight: 190kg Pgjdpowzyn Dofx Abnol With approval as Large Packaging "IBC" for national (GGVS/GGVE/GGVS) and international (ADR/RID/IMDG-Code) transport of dangerous goods of packing groups I, II + III (X-coding) * Dimensions according to DIN 30741 * Container made of steel, hot-dip galvanized * With hinged, lockable lid * Lid locks in any open position up to approx. 70° with special spring mechanism * Container with only 2 locks at the front * With forklift pockets, securing hooks for PE bags, nameplate and pocket Condition: good Available: immediately Location: D-06766 Bitterfeld-Wolfen

Üretim yılı: 2018, Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 10044/0218, Detaylı fotoğraflar ve ürün teknik özellikleri ekteki PDF dosyasında bulunabilir. Torna tezgahları, alyans ve bilezik işlemek için özel olarak tasarlanmıştır. İç ve dış işleme işlemlerinin iki ayrı makinede ayrılması yüksek verimlilik sağlar. Gerekli tüm torna operasyonları (düz tornalama, radyüs, yan tornalama ve pah kırma) makinelerde herhangi bir değişiklik veya yeniden kurulum gerekmeden ardışık olarak yapılabilir. Teknik parametreler: Pjdpfx Abey S Sz Rjnsgl Parametre | Değer Tahrik: 0,55 kW elektrikli frenli Besleme: 380 V / 50 Hz Devir ayarı: potansiyometre Devir aralığı: 0–1400 dev/dak Boyutlar: 100 × 70 × 130 cm Ağırlık: 170–190 kg

Koşul: yeni, Cutting width: 115 and 82 mm Cutting height: 55 mm Motor power: 2.0 kW Machine weight: approx. 45 kg Mitre saw KS for (glass) glazing bead cutting With manual and electronic length stop Suitable for wood, PVC, aluminium ----- Brief manufacturer description: - Crosscut and mitre saw for precise and user-friendly cutting to length in the bead area - Sturdy grey cast iron construction - Double ball-bearing axle positioned as swing pivot below the material support table for improved cutting accuracy. Cutting always occurs at the rear upper area. - Quick mitre adjustment up to 45° - Adjustable position stops at 90° and 45° - Top blade guard can be connected to extraction system ----- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade diameter: 250 mm Extraction nozzle diameter: 45 mm ----- Technical description: Item 1.1: Crosscut and Mitre Saw Type KS, 2 kW, 400 V, 30/40 mm blade mount Item 1.2: Pivot LEFT Item 1.3: Pneumatic material clamping for KS, both sides of the saw blade, 2 horizontal pneumatic cylinders, actuated by a roller valve during saw stroke, can be switched off Item 1.4: Carbide-tipped saw blade for wood 250 x 2.8 x 40 mm 80 teeth, negative rake ----- Price for the above machine on request! Plus packaging and shipping ----- Available options at extra cost: Pgedpfxjy T R Sqo Abnel Item 1.5: €1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery supply, magnetic tape and magnet sensor reading, 0.1° resolution Item 1.6: €695.00 Machine stand for mitre saw KS ----- Item 2.1: Electronic length stop with support plate €7,290.00 Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Electronic length stop system for bead cutting Travel length: 1.8 m, total length: 2.0 m 10'' touch display, 230 V connection Feed rate: 40 m/min Direct measurement system - repeat accuracy +/- 0.1 mm Operating modes: (1) automatic absolute stop, (2) cutting lists, (3) pusher cutting lists, (4) incremental measurement, (5) fine adjustment Program storage for up to 999 cutting lists USB import and direct editing of cutting lists at terminal Stop folds back With support foot Item 2.2: €295.00 Support 2 m, right, 110 mm wide, with support leg ----- Item 3.1: Manual length stop €600.00 Length stop 2 m, left, with 110 mm wide support, with scale, stop slider can be folded back and with support leg Item 3.2: €295.00 Support 2 m, right, 110 mm wide, with support leg ----- (Technical data according to manufacturer – subject to change!) All prices listed are net, plus statutory VAT.

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2018, Fonksiyonellik: tamamen fonksiyonel, Galvanizli hava tankı - 5000 l sunuyoruz. Üretici - OKS Otto Klein GmbH Maksimum çalışma basıncı - 11 bar Üretim yılı 2018. Boyutlar: Çapı - 1400 mm Pgsdpey Slkrjfx Abnol Yüksekliği - 3570 mm Ağırlık - 1050 kg Tank, armatürler dahil olarak sunulmaktadır - emniyet ventili, manometre ve flanşlar.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2020, CLOOS QIROX Roboticzna Linia Spawalnicza – Podwójny System Bramowy – 2020 Opis ogólny Na sprzedaż: wysokowydajna linia spawalnicza oparta na renomowanym systemie CLOOS QIROX, przeznaczona do zautomatyzowanego spawania średnich i dużych konstrukcji stalowych. System składa się z dwóch spawających robotów bramowych pracujących na wspólnej osi liniowej, połączonych ze stołami obrotowymi, co umożliwia wydajne spawanie długich elementów oraz złożonych zespołów. To nowoczesne (rok produkcji 2020), przemysłowe rozwiązanie odpowiednie do ciężkiej produkcji, spawania konstrukcji stalowych, ram oraz produkcji seryjnej. Wyposażenie i konfiguracja kluczowa Roboty Model: CLOOS QIROX QRC 410 Rok: 2020 Typ: 6-osiowy robot przegubowy Udźwig: 10 kg (na nadgarstku) Powtarzalność: ±0,1 mm Zasięg roboczy: ok. Ø 5000 mm Procesy spawalnicze: MIG/MAG, TIG, opcjonalnie cięcie i integracja czujników ✔ Wysoka dynamika i precyzja ✔ Konstrukcja modułowa do elastycznych zastosowań ✔ Odpowiedni do złożonych ścieżek spawalniczych i długich spoin Sterowniki Model: QIROX Controller QC2.02 / QRC 410 Sterownik bazujący na komputerze przemysłowym PC Jednoczesne sterowanie robotem i osiami zewnętrznymi Zasilanie: 3x 400V / 32A 3x 400V / 19A Częstotliwość: 50/60 Hz Moc: do 21,5 kVA ✔ Solidna obudowa szafy sterowniczej ✔ Optymalny interfejs operatora ✔ Wysoka dokładność prowadzenia ścieżki i stabilność procesu Stoły obrotowe (pozycjonery) Model: CLOOS QR-CTU-100-09 2.0 Maksymalny udźwig: 10 000 N (≈1 000 kg) – w pozycji V 20 000 N (≈2 000 kg) – w pozycji H Moment obrotowy: do 1600 Nm Moment wychylający: 8800 Nm Moc napędu: 4,5 kW ✔ Programowalne osie synchronizowane z robotem ✔ Idealne do spawania skomplikowanych geometrii ✔ Umożliwia optymalne pozycjonowanie i dostępność spawów Układ systemu Podwójny system bramowy (2 roboty na wspólnej osi liniowej) Długi obszar roboczy do dużych konstrukcji Zintegrowane stoły robocze do długich elementów Przeznaczony do: ram konstrukcji stalowych długich zespołów spawanych Typowe zalety tej konfiguracji: Poszerzony zasięg pracy dzięki osi liniowej Możliwość równoległego spawania Wysoka wydajność i skrócony czas cyklu Zalety ✔ Wysoka wydajność i powtarzalność ✔ Doskonała jakość spoin ✔ Elastyczna konfiguracja (różne części i gabaryty) ✔ Niezawodność przemysłowa CLOOS ✔ Do produkcji seryjnej i jednostkowej Typowe zastosowania Konstrukcje stalowe Psdpfsyvaahsx Abnjgl Ramy maszyn Komponenty motoryzacyjne Elementy budowlane Ciężka produkcja Najważniejsze cechy techniczne (podsumowanie) Roboty: 2x QIROX QRC 410 Osie: roboty 6-osiowe + osie zewnętrzne Sterowanie: QIROX QC2.02 Pozycjonery: udźwig do 2 000 kg Zasilanie: 400V / 50–60 Hz Rok: 2020 Typ systemu: bramowa linia spawalnicza Stan techniczny i dostępność Stan: bardzo dobry, w pełni sprawny Możliwość testu pod napięciem Możliwość demontażu i wysyłki na cały świat

Koşul: ikinci el, Hamur üç makaralı açıcı Pjdpfey Akd Eox Abnogl

Koşul: mükemmel (kullanılmış), For sale: professional fire pumps PFJ (PFJ Pumpen und Feuerlöschtechnik GmbH, Germany), model TS 8/8 DIN 14410. ⚙️ Technical specifications: Model: TS 8/8 DIN 14410 Capacity: 800 l/min Operating pressure: 8 bar Nominal speed: approx. 2725 rpm Year of manufacture: 2 units – 1993, 32 operating hours, 98 operating hours 1 unit – 1997, 164 operating hours Weight: approx. 162 kg Manufacturer: PFJ GmbH Jöhstadt – Made in Germany 🔧 Technical condition: Pumps fully operational, start and run properly Normal signs of use (scuffs, scratches – visible in the photos) Used equipment but in good technical condition Complete as shown in the photos 📦 Included: Combustion engine pump Control panel Lighting All items shown in the photos 💡 Applications: Fire brigade / Volunteer fire department Water drainage Industrial and construction works Fire protection systems ℹ️ Additional information: Price is for 1 unit Possibility to buy as a set Shipping available Pjdpoyyxiwefx Abnegl

Koşul: mükemmel (kullanılmış), Üretim yılı: 2004, Ben satacağım Zincirli vinç Elektrikli - 12T. -2,8 m/sn. -Carl Stahl. Pgedpev Unuaofx Abnsl -Hücre ∅ 16. - 5.5kW 400V motor. - 2004

Koşul: ikinci el, Üretim yılı: 1998, Makine komple durumdadır - Sökümden önce son ana kadar çalıştı. Tüm parçalar mevcut olup satılıktır. Pgjdpfx Aboyzgh Denjl

Koşul: mükemmel (kullanılmış), Weiss Water Spray Test System Model: SWT 600/800-S Manufacturer: Weiss Umwelttechnik GmbH For sale is a professional water spray test system by Weiss Umwelttechnik. The system is designed for standard-compliant water, spray water, and ingress protection testing according to IPX1, IPX2, IPX3, IPX4, IPX4K, and IPX9K. Ideal for industrial applications, automotive, electronics, quality assurance, development, test laboratories, and research/material testing. Operation is via an integrated touch control panel. Test procedures can be performed automatically. Psdpfxezachce Abnsgl System Manufacturer: Weiss Umwelttechnik GmbH Model: SWT 600/800-S Spray Water Test Unit Test Methods: IPX1 IPX2 IPX3 IPX4 IPX4K IPX9K Features: -- Stainless steel test chamber -- Rotating test table -- Swivel arm system -- Water circulation -- Existing test accessories Electrical Data Supply voltage: 3/N/PE AC 400 V ±10% Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram no.: 82962 CE certification available Water Supply Water inlet: R 3/4" Water outlet: R 1 1/4" Supply pressure: approx. 2 to 6 bar Test pressure IPX9K: adjustable, approx. 80 to 100 bar Technical Data Turntable speed: approx. 1 to 5 rpm Swivel speed: approx. 60°/s Permissible ambient temperature: approx. 10 °C to 35 °C Noise level: approx. 88 dB(A) Heat emission to environment: -- Average: approx. 1 kW -- Maximum: approx. 3.5 kW Equipment -- Touch control panel -- Stainless steel test chamber -- Rotating test table -- Swivel arm -- Water circulation pump -- Nozzle ring / spray ring -- High-pressure unit -- Flow meter -- ESD earth bonding point -- CE mark -- Robust industrial design Dimensions / Weight Test chamber SWT 600/800: Approx. 2,350 x 2,400 x 2,650 mm Test chamber without hinges and door lock: Approx. 2,350 x 2,400 x 1,850 mm Test chamber weight: approx. 650 kg High-pressure unit dimensions: Approx. 850 x 1,200 x 800 mm High-pressure unit weight: approx. 380 kg Total weight: approx. 1,030 kg Documentation -- Operating manual -- EC declaration of conformity -- Quality inspection certificate -- Technical documentation as shown in photos Accessories -- Nozzle ring / spray ring -- Test and spray components -- Swivel arm accessories -- Flow meter -- Connection components -- Tools and keys -- Documentation and papers Condition Used system sourced from industrial application. Visual condition as shown in images. The unit powers on. Display and user interface are functional and visible. No further technical inspection, calibration, or comprehensive functionality check performed. Inspection and on-site testing welcome by appointment. Scope of Delivery -- Weiss Umwelttechnik SWT 600/800-S water spray test system -- High-pressure unit -- Turntable and swivel arm -- Test and spray accessories as shown in the images -- Operating manual and documentation -- Accessories as per photos Note: The table shown in the images is not included. Loading upon arrangement possible. Transport and shipping require a suitable freight forwarder. Dimensions, weights, and technical data have been partially taken from supplier documentation; information may vary. Commercial sale without warranty. Subject to changes, errors, and prior sale.

Üretim yılı: 2025, çalışma saatleri: 2 h, Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, toplam uzunluk: 900 mm, toplam genişlik: 800 mm, toplam yükseklik: 1.900 mm, lazer çalışma saati: 2 h, lazer gücü: 30 W, lazer dalga boyu: 1.064 nm, soğutma tipi: hava, lazer tipi: fiber lazer, lazer kaynak üreticisi: Raycus, The universally applicable LAS 28 XL laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminum, and plastics. Depending on the requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser is now indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and item numbers can be automatically incremented by the software after presetting. Furthermore, the software can extract data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it into predefined fields. Use of a handheld scanner is also possible. Standard equipment includes a laptop with holder, Windows operating system, and laser software. Optionally, the LAS 28 XL laser model can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side arms for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber Laser 30 Watt • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (larger optional) • Marking software EZCAD in German/English • Signal lamp to display operating status • Optional: rotary axis (3-jaw chuck) • Optional: fume extraction (incl. activated carbon filter) • Optional: side arms for large workpieces (one- or two-sided) • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Max. workpiece height approx. 300mm • Electrically adjustable Z-axis • Laptop incl. holder with Windows operating system • Aluminum profile frame Pgsdpfx Absqfcvijnel • Air-cooled • Door width approx. 700mm / Door height (pass-through): approx. 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 100 kg

Koşul: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, mil uzunluğu: 1.064 mm, giriş voltajı: 230 V, giriş akımı türü: Klima, lazer gücü: 30 W, soğutma tipi: hava, toplam genişlik: 1.500 mm, toplam yükseklik: 2.050 mm, toplam uzunluk: 900 mm, çalışma aralığı: 600 mm, toplam ağırlık: 120 kg, garanti süresi: 12 aylar, yükseklik ayar tipi: elektrikli, kapı açıklığı genişliği: 700 mm, kapı açıklık yüksekliği: 400 mm, tarama alanı uzunluğu: 150 mm, tarama alanı genişliği: 150 mm, masa uzunluğu: 600 mm, masa genişliği: 600 mm, gereken genişlik: 1.550 mm, gereken yükseklik: 2.100 mm, lazer dalga boyu: 1.064 nm, çalışma yüksekliği: 950 mm, giriş frekansı: 50 Hz, The universally applicable laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows texts, numbers, 2D codes, QR codes, and logos to be implemented with just a few clicks—no extensive programming knowledge required. Serial and item numbers can be incremented automatically by the software after initial configuration. Additionally, the software can read data (such as drawing numbers, project descriptions, etc.) from existing tables and transfer them automatically to predefined fields. The use of a hand scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical components. Further options, such as side arms for marking long parts, movable Z-axis, drawer systems, etc., are also available. Made in Germany Fiber Laser 30 Watt • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm • Signal lamp to indicate operating status • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction unit (incl. activated carbon filter) • Marking software EZCAD in German / English (other software options available on request) • Pilot laser (simple preview, plain text preview) Pgjdpfxjy T Ixns Abnel • Focus finder (easy focus adjustment) • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Frame made from aluminum profile • Air-cooled • Door width approx. 700mm / Door height (pass-through): approx. 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH); with monitor bracket approx. 1500 x 800 x 1900mm (LxWxH) • Weight: approx. 120 kg

Koşul: mükemmel (kullanılmış), Üretim yılı: 2007, BA 600-2 CNC, Horizontal Machining and Boring Center SW Schwäbische Werkzeugmaschinen GmbH Travel Axes: X-axis: 600 mm Y-axis (alternate position): 600 (975) mm Podjy Swq Repfx Abnsgl Z-axis: 500 mm Control: Siemens 840D control, side-mounted Feed / Rapid Traverse Rates: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average Acceleration: X, Y, Z: 2.5 m/s² Measuring System: Direct position measuring system X, Y, Z Spindles: Spindle speed (stepless): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontally arranged side by side Spindle distance: 600 mm Spindle bearing diameter: 100 mm Liquid-cooled motor spindles with AC technology Working Area: Swing carrier with straight gearing, max. transport load 2,000 kg Swivel time 0/180 degrees: approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. transport load 700 kg, rotational speed 25 rpm Partition wall between machining and loading areas Tool Magazine: 2 x 50 tools HSK-A 100 chain magazine Tool change time (chip-to-chip) 4.48 sec Max. tool diameter 100 mm 250 mm with adjacent pocket free Max. tool length 420 mm Max. tool weight 20 kg Equipment: Centralized lubrication Oil minimum-quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant filtration with compact belt filter Hydraulic system Maintenance unit Water chiller Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other Details: Very good condition Setup in parallel to main time Available from December 2023 / January 2024

Koşul: ikinci el, Üretim yılı: 2017, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 35220, basınç: 10 bar, nominal ısı çıkışı: 5.057 kW (6.875,60 bg), Kullanılmış yüksek basınçlı buhar kazanı - Buhar kapasitesi: 7.000 kg/saat - Ekonomizer - Karıştırıcı soğutucu Pgjdpfxey Ukcrs Abnel - Çift yakıtlı brülör: Weishaupt WM-GL-50 (ses yalıtım kapağı dahil) - Çift pompalı istasyon: Grundfos CR10-12 - Yağ emme ünitesi - Sıcaklık koruma modu (72 saat) - Gerekli tüm armatürler mevcut - İsteğe bağlı: 25 m³ buhar tankı Kazan ve tank 2024'ten beri kuru şekilde devre dışı bırakıldı. Kontrol sistemi halen test edilebilir. Söküm hariçtir (EXW). Belgeler, fotoğraflar, bilgiler (TÜV, brülör bakımı vb.) talep üzerine.

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2019, toplam yükseklik: 2.110 mm, toplam genişlik: 1.413 mm, toplam ağırlık: 640 kg, ürün uzunluğu (maks.): 1.413 mm, eksen sayısı: 6, Bu CLOOS QIROX QRC 350-E 2019 yılında üretilmiştir. Maksimum 15 kg taşıma kapasitesine ve 4500 mm'ye kadar çalışma aralığına sahiptir. QC 2 Master kontrol sistemi ile donatılmış olup, 8,4" dokunmatik ekranlı bir el programlama cihazı içerir. Robot, 12 eksene kadar genişletmeyi destekler ve entegre kaynak yazılımı ve dijital bir arayüz ile birlikte gelir. Bu CLOOS QIROX QRC 350-E kaynak robotunu satın alma fırsatını değerlendirin. Bu makine hakkında daha fazla bilgi için bizimle iletişime geçin. Ekstra Bilgi • Robotik ve Kontrol Birimi • Maks. taşıma kapasitesi: 15 kg • Çalışma aralığı: 0-4500 mm • Dijital girişler/çıkışlar: 16 • Seri arayüz: Evet • CAN veri yolu: Evet • USB arayüzleri: 2 • Flash bellek: 8 GB • Tampon modülü: 24 V • 12 eksene kadar genişletilebilir • Kaynak Teknolojisi Güç kaynağı: Dahil • Kaynak arayüzü: Entegre • Kaynak ve fonksiyon testi: Dahil olanlar • Torç temizleme: CMR-8-C torç temizleme cihazı • dik Robotik kaynak torcu: Dahil • Sensörler Dokunsal sensör: Evet • Ark sensörü: İş Parçası Konumlandırıcısının Dahil Edilen Teknik Verileri • Yük kapasitesi: 10 kN • Nominal tork: maks. 1600 Nm • Devrilme momenti: maks. 8800 Nm • Kütle atalet momenti: 900 kgm² Pjdpfex D Hdhsx Abnsgl • Dönme aralığı: +,- 360° • Dönme aralığı: 370° • Kaynak Dumanı Emme kapasitesi: 3000 - 4320 m³/h • Motor gücü: 5,5 kW • Bağlantı gerilimi: 3 x 400V/50 Hz • Gürültü seviyesi: 65 dB(A) • Ağırlık: 640 kg • Boyutlar (G x D x Y): 1413 x 1413 x 2110 mm

Koşul: iyi (kullanılmış), Üretim yılı: 2016, çalışma saatleri: 317 h, kaldırma yüksekliği: 6.200 mm, yakıt türü: elektrikli, Drivetrain Drive: Wheel Weights Unladen weight: 1,875 kg Functional Data Lifting capacity: 350 kg Working height: 820 cm CE marking: yes Condition Technical condition: good Visual condition: good Additional Information Transport dimensions (L x W x H): 248 x 81 x 199 cm Platform type: Flat platform Further Information Please contact Tobias Mayr for further details. Haulotte Compact 8 with 8.20m working height – Electric Scissor Lift Outstanding productivity Load capacity up to 350 kg Driveable at full working height Suitable for both indoor and outdoor use with the same load capacity Optimal operating time Robust, reliable, easy to maintain Brand: Haulotte Model: Compact 8 Year of manufacture: 2016 Pgodpfxoy U Dvfj Abnsl Operating hours (read): 317 Batteries from 2022 Net weight approx. 1,875 kg Working height approx. 8.20 m Platform height: 6.20 m Load capacity: 350 kg Gradeability: 25% Built-in charger Extendable platform up to 323 cm length UVV safety inspection can be carried out upon request. Dimensions: Length: 248 cm Width: 81 cm Height: 199 cm Miscellaneous: Affordable delivery available Europe-wide. Viewings by appointment only. We accept your equipment/construction machinery in part exchange. We are happy to offer you a tailor-made financing or leasing solution (for business customers only). If you have any questions, please contact us. All prices are ex location 86684 Holzheim. All information is non-binding. Subject to change, printing and transmission errors, and prior sale. All information regarding color, equipment, condition, features, etc. of the offered vehicles is given without guarantee. Subject to errors, omissions, and prior sale.

Koşul: ikinci el, Üretim yılı: 2021, makine/araç numarası: ITJ514296, AIR ENERGIE CONTROL 3+ kontrol ünitesi, Maksimum basınç 13 bar Pgjdey Sqiyepfx Abnsl

Koşul: ikinci el, Üretim yılı: 2021, makine/araç numarası: ITJ719403, AIR ENERGIE CONTROL 3+ kontrol ünitesi, maksimum basınç 13 bar. Pgedpfx Asy Sqkdjbnol

Koşul: ikinci el, Üretim yılı: 2012, Automated system / Field of application: chrome plating, nickel plating, copper plating / Programs: pre-cleaning, pretreatment, metallization, post-treatment / Base materials: ABS and ABSPC / Technical data: Goods window per carrier 2800 mm x 1700 mm x 300 mm, max. 8 square meters of electroplated surface per carrier, cycle time 3.00 min. (system), cycle time 2.50 min. (demetallization) / Capacity: 20 carriers per hour, clear spacing anode/anode (chrome) 700 mm, (copper) 700 mm, (nickel) 700 mm, clear entrance dimension 550 mm (in direction of travel), 3100 mm (width), bath dimensions (rinsing) 3100 mm x 700 mm / Power consumption: Drives: transport system 133 kW, filter 194 kW, exhaust air 229 kW, wastewater plant 150 kW, switchgear 704 kW, rectifier approx. 3190 kW, heating energy approx. 1410 kW / Comprising: automatic loading system with 135 carriers, 5 loading and unloading stations, wastewater treatment plant and exhaust air system / Tanks, electroplating baths, and exhaust system made of chemically resistant plastics. NOTE: Various ongoing expansions and modernizations of the plastic electroplating system since 2015! Pedpfxoy Rvtuo Abnegl

Koşul: ikinci el, Kayar bantlı manyetik konveyör, manyetik kayar konveyör DGS System GmbH Z-konveyör, kayar bantlı konveyör, konveyör bant, manyetik bantlı konveyör Tip no: MBF 326P31,75 Com. no: 44489-10 Yapım yılı 2017 Kızak genişliği 300 mm Kalıcı mıknatıslar arasındaki mesafe 250 mm Yerleştirme uzunluğu yakl. 3400 mm (gövde kutusuna kadar) Kaydırma uzunluğu yaklaşık 3900 mm (üst yapı kutusu olmadan) Kızak yüksekliği 210 mm Pgsdpfx Asi Huzxsbnjl Yerleştirme genişliği gövde 370 mm Tesviye ayakları için dişli bağlantıların kayma genişliği 410 mm Gövde kutusunda ekleme genişliği 470 mm Taşıma yüksekliği - boşaltma yüksekliği yakl. 1040 mm Konveyör hızı yaklaşık 2 metre/dak. Motor gücü kayış tahriki 0,37 kW Şebeke bağlantısı 400 Volt, 50 Hz - Kalıcı mıknatıslarla donatılmış sirkülasyon zinciri Alan gereksinimi U x G x Y 5200 x 700 x 1500 mm Ağırlık 410 kg Çok iyi durumda

Koşul: ikinci el, Technical Data Feed Hopper with Hydraulic Moving Floor and Bag Opener for Recyclables from Yellow Bags and Commercial Waste: Manufacturer: BRT HARTNER GmbH Type: HP5-3035 Year of Manufacture: 2015 Hopper Volume: 30 m³ Drive Power: 17.5 kW Dimensions in Current Condition: 13,200 x 3,050 x 4,350 mm (L x W x H) Condition of the Machine: The feed hopper with bag opener was in operation at a major recycling company, where recyclable materials from yellow bags or commercial waste were tipped into the bunker by wheel loaders, the bags were opened by the bag opener, and the recyclables were conveyed in a metered flow to a sorting system, or the commercial waste was forwarded for further processing. The system operated flawlessly until dismantling and was replaced with a larger system with higher throughput. The machine was dismantled into individual components in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul works were carried out and/or the following spare parts were replaced: - Dismantling of the feed hopper and bag opener into individual components. Cleaning, partial sandblasting, priming, and painting of the steel parts. - Various wear and cover plates were newly manufactured and installed. - Cutting off the worn ends (approx. 40 cm) of the moving floor tubes. Welding on new tubes and smoothing of the moving floor tubes. - Renewal of all sliding plastic plates for the hydraulic moving floor. - Dismantling of the hydraulic power unit for the moving floor, draining any residual hydraulic oil, replacing the oil filters, and refilling with new hydraulic oil. - Replacement of the three hydraulic blocks, all valves, oil sight glass, and all hydraulic hoses of the hydraulic unit. - All three hydraulic cylinders for the moving floor had their seal kits and hydraulic hoses replaced. - All six limit switches (proximity sensors) for the moving floor were replaced. - The conveyor chains on the left and right of the scrape conveyor were replaced. - Seven driver bars on the scrape conveyor were replaced. - The drive motor for the bag opener blades was replaced. - All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. - All sliding plastic plates for the hydraulic movement of the bag opener were replaced. The bag opener can be moved in depth to allow the system to be used for commercial or residual waste without employing the bag opener. - The lateral collision protection plates were replaced on both sides. - Various wear parts of the bag opener were replaced. - The entire system was rewired and electrically reconnected. - The system control in the control cabinet was converted by the manufacturer, BRT Hartner, back to stand-alone single control, and the standard program was reloaded to the control unit. - The system was commissioned and tested by BRT Hartner, as shown in the function video. Pjdpfx Absy Urtfjnegl Remarks: Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is available. Viewing by appointment possible. We assume no liability for technical data or possible errors.

Koşul: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, mil uzunluğu: 1.064 mm, giriş voltajı: 230 V, giriş akımı türü: Klima, lazer gücü: 30 W, soğutma tipi: hava, toplam genişlik: 800 mm, toplam yükseklik: 2.000 mm, toplam uzunluk: 900 mm, toplam ağırlık: 100 kg, garanti süresi: 12 aylar, yükseklik ayar tipi: elektrikli, kapı açıklığı genişliği: 700 mm, kapı açıklık yüksekliği: 400 mm, tarama alanı uzunluğu: 150 mm, tarama alanı genişliği: 150 mm, giriş akımı: 16 A, gereken genişlik: 800 mm, lazer dalga boyu: 1.064 nm, çalışma yüksekliği: 900 mm, alan gereksinimi uzunluk: 900 mm, giriş frekansı: 50 Hz, lazer tipi: fiber lazer, Donanım: duman emişi, The universally applicable LAS 28 XL laser marking system by Systemtechnik Hölzer GmbH is suitable for a wide range of marking requirements. With the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, laser technology has become indispensable in many industries. The powerful laser software enables you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. Serial and part numbers can be incremented automatically by the software after prior setup. Additionally, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. The use of a hand scanner is also possible. Standard scope of delivery includes a laptop with mounting bracket, equipped with Windows operating system and laser software. Optionally, the LAS 28 XL laser model can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral outreach arms for marking long parts, motorized Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064nm • Marking field size: 150x150mm (optionally larger) • Marking software: EZCAD (German/English) • Signal light to indicate operating status • Optional: Rotary axis (3-jaw chuck) • Optional: Digital height measuring system • Optional: Extraction system (incl. activated carbon filter) • Optional: Outreach arms for large components (one-sided, double-sided) • Optional: Autofocus system • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Max. component height approx. 300mm • Electrically adjustable Z-axis • Laptop including mounting bracket with Windows OS • Frame made from aluminum profile • Air-cooled • Door width approx. 700mm / Door height (pass-through): approx. 400mm Psdoywg Sbspfx Abnsgl • Power supply: 230V • Dimensions: approx. 900 x 800 x 2000 mm (LxWxH) • Weight: approx. 100 kg

Üretim yılı: 2026, Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 140 kg, toplam uzunluk: 900 mm, toplam genişlik: 800 mm, toplam yükseklik: 2.000 mm, giriş frekansı: 50 Hz, lazer gücü: 30 W, lazer dalga boyu: 1.064 nm, tarama alanı uzunluğu: 150 mm, tarama alanı genişliği: 150 mm, soğutma tipi: hava, giriş akımı türü: Klima, lazer tipi: fiber lazer, The universally applicable laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking tasks. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent markings, the use of a laser is now indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and article numbers after initial configuration. Additionally, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a handheld scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber Laser 30W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optional larger) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (including activated carbon filter) • Optional: autofocus system - automatic focus distance determination • Pilot laser (simple preview, contour preview) Podsxuvk Eopfx Abnjgl • Focus finder (easy focus adjustment) • Signal light to indicate operating status • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / Door height (pass-through): 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 2000 mm (LxWxH) • Weight: approx. 120 kg

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2023, Fonksiyonellik: tamamen fonksiyonel, kağıt genişliği (min.): 2.100 mm, kağıt yüksekliği (maks.): 120 mm, toplam uzunluk: 3.300 mm, toplam genişlik: 3.500 mm, toplam yükseklik: 2.100 mm, Bürkle LFC 2100 Liquid Coating System Pgjdpfxjy Szwus Abnjl Application: For liquid coating of digitally printed media. Suitable for the application of primers or protective lacquers, as well as for full-surface finishing of digitally printed media in a continuous process with solvent-free UV lacquers and direct lacquer curing via top-mounted UV radiation. Condition: As new (purchased in 2023) Availability: Immediately Description: For sale is a high-performance coating system from Bürkle, model LFC 2100. The machine was purchased new from Welte in 2023 and has only been used for a few operating hours since then. It is in excellent optical and technical condition (demonstrator quality) and offers a first-class solution for UV finishing of large format prints. The system also includes a cleaning/washing unit with extraction and a second roller (smooth roller). Technical Data & Features: - Maximum working width: 2,100 mm - Substrate thickness: Flexibly adjustable up to 80 mm - Feed speed: Infinitely adjustable (up to 25 m/min) - Drying: Includes powerful UV drying unit (TRUV) for immediate further processing - Controls: Modern operator panel for precise process control Asking Price €150,000 (negotiable) plus VAT | ex-works (EXW) Contact & Inspection The system is still installed and can be inspected and tested under power by prior appointment. (Location: St. Martin bei Lofer, Austria)

Koşul: ikinci el, Üretim yılı: 1992, Teknik detaylar: Çalışma gerilimi: 400/50 V/Hz Basınçlı hava bağlantısı: 7 bar Kontrol: - Maksimum presleme kuvveti: 340–375 t Toplam güç ihtiyacı: 15 kW Makine ağırlığı yaklaşık: 1,4 kg Makine boyutları: 1,4 x 0,8 x 1,6 m Pjdjxv Awzopfx Abnegl Hortum ve Crimp Pres Makinesi ·Hidrolik hortumların seri üretimi (atölye, tamir, üretim hattı). ·Dayanıklı, yüksek presleme kuvveti; büyük hortum çapları ve yüksek basınçlı bağlantı parçaları için uygundur. ·Yağsız yataklar/teknoloji sayesinde temiz çalışma – daha uzun ömür, iş parçasında daha az kir. Çalışma alanı: 6SP’ye kadar tüm hortumlar (SAE 100R 13-14) ve DN 125 veya I.D.5’e kadar pres bağlantı parçaları Presleme aralığı: D=9 ile D=180 mm arasında Pres takımı: çift kama sistemi (yurtiçi ve yurtdışı patentler) Maksimum presleme mesafesi D=20mm Maksimum ayar mesafesi D=10mm Pres programı sayısı: 3