Kullanılmış Gooseneck Gooseneck satın al (288)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Brahmenau
2.237 km
çöp kamyonu
Mercedes-BenzActros 2540 L 6x2 / EHP 7000
Çağrı
Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 34103, kilometre: 28.900 km, güç: 290 kW (394,29 bg), ilk tescil: 09/2024, yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 6x2, dingil mesafesi: 4.300 mm, yakıt: dizel, renk: beyaz, şoför kabini: gündüz kabini, vites türü: yarı otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik-hava, yükleme alanı hacmi: 33 m³, Donanım: ABS, Takograf, diferansiyel kilidi, ek farlar, elektrikli ayna, elektrikli cam sistemi, hava yastığı, hız sabitleyici, kamyon kaydı, klima, merkezi kilitleme, çekiş kontrolü, The mileage of the vehicles on offer may vary, as some vehicles are currently in rental service.
Further similar vehicles available upon request.
M2Q engine OM470, R6, G2B gearbox G 211-12/14, steered trailing axle, 290 l fuel tank, 60 l AdBlue, front underrun protection, ABS, ASR, ESP, lane departure warning, attention assist, Active Brake Assist 5, cruise control, tyres: 1st axle 385/55 R22.5, 2nd and 3rd axles 315/70 R22.5
MirrorCam, comfort driver's suspension seat, functional passenger seat, multimedia cockpit, navigation system, digital radio, air conditioning
Fedjyc R U Nspfx Almegb
Rear section: "L-Kelpie" net loading volume 33m³; net fill hopper volume: 9.6 m³; compaction plate with scraper to floor; hydraulically folding cab protection roof; driver's cab GRP protection roof; follower panel with inverted cab protection roof; third hatch as wind deflector, Sulo lid opener; quiet and low-wear rotary vane pump; clearly arranged control unit, all loading functions operated by a single control lever (joystick) and operator guidance via colour display; discharge function operable from the cab; self-diagnosis system with plain text display; fork, extended, adjustable on both sides (adjustment range 1,280mm–1,890mm) and integrated 1.1 lifting device (container compliant with 840 2-3); LED arm marking lights, without indicators; 2 arm guide rollers in tipping position; 1x LED rotating beacon mounted at the top rear; 1x LED work light at the fill hopper; 1x LED work light behind driver's cab; 2x LED gooseneck lights, bottom marker lights; 2x LED upper marker lights; 1 LED rotating beacon at bottom right rear; 2 LED strobe lights at the front under the protection roof; 2 LED work lights at the front; LED peripheral lighting with automatic cut-off at 15 km/h; 2 LED reversing lights on both sides, coupled to reverse gear; central lubrication system incl. electric pump; camera system—front camera, rear monitoring, and roof camera for fill hopper; remote control with position lock; engine speed increase by remote control; contour marking; bracket for shovel and broom; aluminium ladder with ascent limiter; 2x A-signage; fork scale—MOBA.
Küçük ilan
Brahmenau
2.237 km
çöp kamyonu
Mercedes-BenzActros 2540 L 6x2 / EHP 7000
Çağrı
Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 34102, kilometre: 29.990 km, güç: 290 kW (394,29 bg), ilk tescil: 09/2024, yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 6x2, dingil mesafesi: 4.300 mm, yakıt: dizel, renk: beyaz, şoför kabini: gündüz kabini, vites türü: yarı otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik-hava, yükleme alanı hacmi: 33 m³, Donanım: ABS, Takograf, diferansiyel kilidi, elektrikli ayna, elektrikli cam sistemi, elektronik denge programı (ESP), hava yastığı, hidrolik direksiyon, hız sabitleyici, kamyon kaydı, klima, merkezi kilitleme, çekiş kontrolü, The mileage of the vehicles offered may vary, as some vehicles are currently in rental service! Further comparable vehicles available upon request.
Technical specifications:
- Engine: M2Q OM470, inline 6-cylinder
- Transmission: G2B G 211-12/14
- Steering tag axle
- 290 l fuel tank, 60 l AdBlue tank
- Front underrun protection
- ABS, ASR, ESP, Lane Keeping Assist, Attention Assist, Active Brake Assist 5, cruise control
- Tyres: 1st axle 385/55 R22.5, 2nd and 3rd axles 315/70 R22.5
Fjdpeyc R T Eefx Almogb
- MirrorCam
- Driver’s comfort air-suspended seat, functional co-driver’s seat
- Multimedia cockpit, navigation system, digital radio, air conditioning
Rear section:
- "L-Kelpie" body
- Net loading volume: 33 m³
- Net feed hopper volume: 9.6 m³
- Packing plate with scraper to the floor
- Hydraulic folding cab roof protection
- GRP cab protection roof
- Follower panel with inverted cab protection roof
- Third hatch as wind deflector
- Sulo lid opener
- Quiet and low-wear vane cell pump
- Clear control panel: all loading functions operated with a single joystick and guided via color display
- Discharge operation can be controlled from the driver’s cab
- Self-diagnosis system with plain text display
- Fork extension, adjustable on both sides (adjustment range 1,280 mm–1,890 mm), with integrated 1.1 container grab (according to EN 840 2-3)
- LED arm marking lights, without indicators
- 2 arm guide rollers in tipping position
- 1x LED beacon mounted on the upper rear
- 1x LED work light at the feed hopper
- 1x LED work light behind the cab
- 2x LED gooseneck clearance lights, lower position marker lights
- 2x upper LED marker lights
- 1x LED beacon, lower rear right
- 2x LED strobe lights at the front under the protection roof
- 2x front LED work lights
- LED surround lighting with automatic shut-off above 15 km/h
- 2x reversing LED work lights, activated when reverse is engaged
- Central lubrication system including electric pump
- Camera system: front camera, rear area monitoring, roof camera for hopper surveillance
- Radio remote control with position binding
- Engine speed increase via remote control
- Contour marking
- Mountings for shovel and broom
- Aluminium ladder with ascent limiter
- 2x A-signage
- MOBA fork scale
Küçük ilan
Parma
2.155 km
Diğerleri
Zorzisemirimorchio hospitality racing motorhome usato
Çağrı
Koşul: ikinci el, makine/araç numarası: 1, boş ağırlık: 15.000 kg, azami yük ağırlığı: 15.000 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/1994, yükleme alanı uzunluğu: 13.800 mm, yükleme alanı yüksekliği: 2.500 mm, süspansiyon: hava, lastik boyutu: 265.70 r 19.5, renk: koyu kırmızı, Üretim yılı: 1994, Donanım: ABS, Semi-trailer hospitality unit converted for office use and viewing, Zorzi gooseneck chassis, year 1994, racing outfitting year 2012, roof can be raised electro-hydraulically for a walkable and equipped second floor, side doors, rear opening, lateral storage compartments, ground floor equipped with 3 furnished rooms, air suspension, good condition. Dealer: Interdrive Srl - Parma.
Fgedpfxsk Aw Urs Almeb

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Parma
2.155 km
Alçak yükleyici inşaat makineleri
Nooteboomcarrellone culla 2 assi nooteboom ribassato usato
Çağrı
Koşul: ikinci el, boş ağırlık: 9.800 kg, azami yük ağırlığı: 37.700 kg, toplam ağırlık: 47.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/1999, yükleme alanı uzunluğu: 12.600 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 500 mm, süspansiyon: hava, lastik boyutu: 245.70 r 17.5, renk: trafik turuncu, Üretim yılı: 1999, Donanım: ABS, Nooteboom low loader with trough, 2 axles with air suspension, EBS, 2 steering tridec axles from turntable, adjustable via linkage, lower deck measuring 6.0 m in length x 50 cm ground clearance, adjustable and detachable gooseneck, payload capacity up to 47.5 tons, year 1999. Dealer: INTERDRIVE SRL – Parma.
Fgsdjpdqvlepfx Almob
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglZTS 200 P
Çağrı
Koşul: yeni, makine/araç numarası: 535119ca408d3bd5a8e74be51, boş ağırlık: 6 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-loader Trailer
Welded steel construction
Turntable with heavy-duty ball bearing slewing ring, tool box recessed in the turntable frame
Foldable rear support
Wheel chocks with holders
Aluminium side underrun protection
Half-shell mudguards on 1st axle, quarter-shell mudguards in front of and behind the 2nd axle
with anti-spray mudflaps behind each axle
1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with padlock (lock not included)
Extendable deck widenings to 3,000 mm (not in rear chamfer)
(the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm), central compartment for timber planks on the loading area, 70 mm planks for widening to 3,000 mm
Lashing Points Low-loader
3 pairs of 10 t lashing points integrated in the floor at the front
6 pairs of lashing mushrooms, 10 t each, recessed at the top and side in the outer frame
1 x after gooseneck, remaining distributed in between, spacing not greater than 1,200 mm
1 x rear chamfer
5 pairs of ring lashing eyes in the outer frame, 5 t each (instead of stake pockets)
Trailer Drawbar Assembly - Turntable trailer
Drawbar with tested 40 mm towing eye
Axles & Suspension
SAF drum brake axles
Axles/chassis laser measured to reduce tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings
Wheels and Tyres
235 / 75 R 17.5
As per manufacturer's choice
Steel rims in twin arrangement, factory silver
Braking System
2-line compressed air braking system
Spring-loaded parking brake
2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit
ABS and ALB, with ABS plug at the front, with connecting cable
Note: This trailer may only be towed by tractor units that ensure the effectiveness of the ABS!
Electrics
24 Volt, multi-chamber lights, yellow LED side markers
2 white/red lane marker lights at the rear
2 white position lights at the front
1 revolving beacon with holder, switchable via parking light (beacon removable)
Fgedei Ri N Hopfx Almsb
2 pairs of warning signs, double LED illuminated, extendable to 3,000 mm
2 x 7-pin interchange-proof plugs at the front, with connecting cable
Deck
Front section with steel floor,
then 70 mm softwood floor, wheel arch areas with steel/chequer plate covering
Rear chamfer with 70 mm softwood floor
Low-loading area incl. rear chamfer 8,200 mm
Access Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Additional foldable ramp lock at the bottom (prevents side slippage of ramps, not in combination with hydraulic side ramp adjustment)
Wood covering
Assisted by spring lifters
Operating Notes
Special permit is required for 10,000 kg axle load. Permit must be applied for individually in each federal state; the legislator is not obliged to guarantee a permit for 20 t GVW. Customer's responsibility.
The specified total weight is technically possible, depending on the load, the permissible gross weight may not be achievable due to axle/support/saddle load restrictions.
Registration / Plates
Country of registration: Germany
Test approval according to EC 2007/46
24/7-Service Hotline
Prepared for two-line number plate holder
Contour marking with reflective strips according to ECE R 048, white on sides and red at rear
Warning sign according to ECE - 70
Paintwork
Frame: DB Novagrau
Ramps: hot-dip galvanised
Note: Archive photos!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglZTS 200
Çağrı
Koşul: yeni, makine/araç numarası: 2b58968e34fac93b429a256e9, boş ağırlık: 5 kg, azami yük ağırlığı: 12 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis – Low-bed Trailer
- Steel welded construction
- Turntable with heavy-duty ball race, storage box recessed in turntable front section
- Foldable rear support
- Wheel chocks with holders
- Aluminum side underrun protection
- Full-width rear spray flap
- Quarter shell mudguards in front of 1st axle
- Spare wheel carrier for 1 spare wheel, with attachment kit
- Spare wheel, same brand and specification as base tires, steel rim
- Plastic toolbox with insert shelf, dimensions: width=620 / height=360 / depth=440 mm, lockable with a padlock (lock not included)
Tie-down Points Low-bed
- 3 pairs of lashing points, each rated for 10 tons, integrated into the floor at the front
- 6 pairs of lashing studs, inserted in the upper and side outer frame, each for 10 tons; 1 in the gooseneck area, remaining distributed with max spacing of 1200 mm; 1 at rear incline
- 5 pairs of ring-type lashing eyes recessed into the outer frame, each rated for 5 tons (convertible to stake pockets)
Trailer Drawbar/Turntable
- Drawbar with tested 40 mm towing eye
Axles & Suspension
- SAF drum brake axles
- Axles/chassis laser aligned to reduce tire wear and fuel consumption
- Parabolic suspension with maintenance-free steel-rubber bushings
Wheels and Tires
- 235/75 R17.5
- Tire brand at manufacturer’s discretion
- Steel twin-mounted rims, factory silver
Braking System
- 2-line air brake system
- Spring-loaded parking brake
- 2 reverse-polarity-proof coupling heads at the front, with connecting lines to the towing vehicle
- ABS and ALB, with ABS plug at the front, connection cable, voltage converter for 12/24 volt operation
Note: A 7-pin 12V socket on the tractor/hauler is required (required for electrics with voltage converter!)
Warning: The trailer may only be towed by vehicles that guarantee the effectiveness of the ABS!
Electrics
- 24 volts, multi-chamber lighting, yellow LED side markers
- 2 white/red track lights at the rear
- 2 white position lights at the front
- Additional LED work light at the rear, operated via reverse gear
- 2 x 7-pin reverse-polarity-proof plugs at the front, with connecting cable
- 1 x 7-pin agricultural plug
- Voltage converter 12/24 volt (for electrics only, not for ABS/EBS)
Floor
- Steel floor in the front area, followed by 70 mm softwood floor
- In the wheel arch area: steel / chequer plate covering
- Rear incline with 70 mm softwood floor
- Low-bed platform including rear incline: 8,200 mm
Access Ramps
- Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
- Wooden overlay
- Spring-lift assisted
Fodpei Ri Nxofx Almsgb
Operating Instructions
- A special permit is required for 10,000 kg axle load. The permit must be applied for separately in each federal state; approval for 20-ton GVW is at the discretion of the authorities – customer’s responsibility.
Country of Registration / License Plates
- Registration country: Germany
- With Dekra inspection and expert's report (according to §13 EC-FGV)
- 24/7 service hotline
- Prepared for two-line license plate holder
- Reflective contour marking as per ECE R 048, white on the sides and red at the rear
Paintwork
- Frame: DB 7350 Novagrau
- 10-year anti-perforation warranty
- Drawbar: galvanized or painted black, depending on manufacturer's choice
- Ramps: hot-dip galvanized
Note: Archive images!
Küçük ilan
Triptis
2.248 km
Flatbed/branda
FlieglSDS 470 Jumbo für Staplertransporte
Çağrı
Koşul: yeni, makine/araç numarası: 56c59c8aba35227ffb44c9f75, boş ağırlık: 11.350 kg, azami yük ağırlığı: 26.650 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Fedji Riw Aopfx Almsgb
Jumbo Chassis Semi-Trailer
Steel welded construction with closely spaced cross members, reinforced design, low-loader outer frame profile, suitable for transporting construction machinery up to 32,000 kg and a maximum external machine width of 2550 mm, fifth wheel plate with interchangeable 2'' kingpins. Rear slant approx. 1200 mm at 7°. Enclosed upper ramp shaft with steel/tread plate.
In the low-bed section, omega rail laterally below the outer frame serves as a hanging strip for tarpaulins and distance holders for the lashing mushrooms, not in the wheel area. For the lift table: an additional fixed lightweight outer frame with omega profile allows for the lift table to be raised with closed tarpaulin!
24 t, 2-speed landing gear with single-side operation, half-round base and straight mounting plate, with thrust compensation. Free swing radius to rear: approx. 1950 mm.
Rear support foldable
2 wheel chocks with holders
Side underrun protection made of aluminium
Quarter-shell mudguards at front and rear of each axle
Anti-spray flaps behind each axle
Rear underrun protection made of steel
Full-width spray flap across the rear
4 stainless steel toolboxes, w=800/h=350/d=350 mm, with polished doors, lockable; 2 each on FR-left and FR-right in front of the 1st axle
Lift table after gooseneck, approx. 3000 mm long, hydraulically liftable for driving over the gooseneck, with mechanical locking in raised position (cylinder angled for good ground clearance, Fliegl standard). Controls on FR-right + additional operation via wireless remote control (same as ramp operation). Lift table can be raised with tarpaulin closed!
Tarpaulin hanging on lift table area on an additional lightweight fixed outer frame with omega profile, lift table can be raised with closed tarpaulin! Lashing mushrooms remain usable even when table is lowered!
Lashing points
Gooseneck:
4 pairs of 5 t lashing rings recessed into outer frame
2 pairs of lashing mushrooms, both above and on the sides, recessed into outer frame
Low-bed:
8 pairs of lashing mushrooms, both top and side, recessed into outer frame, each 10 t
't 9 pairs of 5 t in outer frame
Axles & Suspension
SAF drum brake axles
Last axle steered, with automatic reverse lock via reversing light, and additional lock feature on vehicle via hand button
Air suspension with lift & lower valve + auto-reset function
H & S function with quick venting
1st axle is an automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid is functional up to 30% axle load exceedance and up to a max. speed of 25 km/h)
Axle lift is below recommended driving height, therefore no guarantee for tire damage
Wheels and Tyres
235 / 75 R 17.5
from leading manufacturers
Steel twin wheels, factory silver
Braking System
2-line compressed air braking system
Spring-loaded parking brake
2 tamper-proof coupling heads at front, no connecting line
EBS, electronic braking system with EBS socket at front, no connecting cable
Note: The trailer may only be towed by trucks that guarantee the effectiveness of the ABS!
Axle load detection in the truck via EBS, without truck installation (no calibrated scale)
Electrical System
24 volt, multi-chamber lights, side yellow LED lighting
2 white position lights at the front, in LED
2 white/red lane marker lights at the rear
1 rotating beacon with holder, switchable via parking light (removable beacon)
2 pairs of warning signs, double LED illuminated and e
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglVTS S 400 Parab/Hydr.
Çağrı
Koşul: yeni, makine/araç numarası: 408ba9a39bbb8087056d6e563, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis Lowbed Trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
2 wheel chocks with holder
Side underrun protection made of aluminium
Full-width rear splash guard
Semi-shell mudguards on 1st and 2nd axles with anti-spray flaps behind each axle, anti-spray flaps in front of and behind 3rd and 4th axles
Excavator arm recess over the rear axles, running to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes rated 5 t each in the excavator arm recess at the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear incline
1 plastic toolbox, with insert shelf, w=620/h=360/d=440 mm, lockable with padlock (lock not included)
1 storage box recessed in the gooseneck in the floor with lid, W=720 mm/L=520 mm/D=170 mm
Extendable width to 3,000 mm (not in the rear incline) (track width of machines or vehicles to be transported must not exceed outer frame width of 2,550 mm)
Timber beams 70 mm for extension to 3,000 mm
Storage compartment for timber beams under loading area
Lashing rings lowbed (40 lashing points)
1 pair of lashing rings on gooseneck, each 5t
9 pairs of lashing studs, integrated in the top and side of outer frame, each 10t
2 x on gooseneck in front
7 x in the lowbed area
6 pairs of lashing holes in the outer frame of the lowbed area, 5 t each (for tie-down straps)
3 additional pairs of folding lashing rings, each 10 t
1 x inside next to main frame at start of lowbed
1 x on gooseneck (protrudes)
1 x recessed in the floor behind the last axle
Trailer drawbar assembly
Drawbar with tested 50 mm towing eye, towing eye inclined at 8°, D-value minimum 160 kN
Axles & Suspension
Drum brake axles
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation front and rear (rocker compensation)
Wheels and Tires
235 / 75 R 17.5
as selected by manufacturer
Steel twin wheels, factory silver
Brake system
2-line air brake system
Spring-loaded parking brake
2 anti-mismatch coupling heads at front, with connection lines to truck
ABS and ALB, with ABS plug at front, with connection cable
Electrics
24 volt, multi-chamber lights, side yellow LED lighting
2 white position lights at front
2 white/red marker lights at rear
2 x 7-pin anti-mismatch plugs at front, with connection cable
1 LED rotating beacon with holder, controlled via parking light (beacon detachable)
2 pairs of warning signs, double LED-illuminated and extendable to 3,000 mm
Floor
Gooseneck at front with steel/aluminium chequer plate covering
followed by 70 mm softwood floor, with steel/aluminium chequer plate over wheel wells
Rear incline with 70 mm softwood floor
Access ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
with timber surfacing
Hydraulic, powered via tractor PTO with flow restrictor, controlled laterally front left
Hydraulic connection with SVK plug NW 10/3, including connecting hose
Fgodpfxji Ri Das Almob
Approval country / Plates
Approval country: Germany
24/7 service hotline
Prepared for two-line number plate holder
Contour marking with reflective tape as per ECE R 048, side white and rear red
Warning sign according to ECE - 70
Paintwork
Frame hot-dip galvanized including passivation, 15 years corrosion perforation warranty
Drawbar galvanized or black, as per manufacturer’s choice
Access ramps hot-dip galvanized
Note: Images are for illustrative purposes (archive images)!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS 300 P mit Radmulde
Çağrı
Koşul: yeni, makine/araç numarası: ede0610378cbe39cc4883251d, boş ağırlık: 24.000 kg, azami yük ağırlığı: 7.550 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low Loader Trailer
Steel welded construction
1st pair of wheel recesses integrated into the steel platform in the driving aisle area, tapered for entry, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note!
The frame is 400 mm higher than the wheel recess in the main beam area.
If machines are to be transported and the total height needs to be checked, we kindly request the technical datasheet of the machine types with exact specifications (if total height is exceeded -> customer risk, approval required). Depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer.
Turntable with heavy-duty ball bearing slewing ring, toolbox integrated into the turntable front section
Rear support foldable
2 wheel chocks with holders
Side underrun protection in aluminium
Rear mudflaps across the full width
Extendable widening to 3,000 mm (not in rear bevel area)
(The track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550 mm)
Storage compartment for wooden planks in the centre of the loading area
70 mm wooden planks for widening to 3,000 mm
Lashing points for low loader
3 pairs of lashing points integrated into the front floor, each 10 t Incl.
6 pairs of lashing mushrooms recessed in the upper and side external frame, each 10 t
1 x in the gooseneck area
The rest distributed in between, distance not greater than 1200 mm
1 x rear bevel
5 pairs of stake pockets recessed into the external frame, inside 70 x 40 mm (convertible to 5 t ring lashing points, not included)
Drawbar for turntable trailer
Fgjdpfxji Ri Rys Almjb
Drawbar with certified 40 mm towing eye
Axles + Suspension
SAF drum brake axles
Axle/undercarriage laser measured for reduced tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber mounting
Brake System
2-line compressed air brake system
Colour-coded piping for easy servicing
Spring-actuated parking brake
2 non-interchangeable coupling heads at the front with connecting lines to the truck
ABS and ALB, with ABS socket at the front, including connection cable
Attention: The trailer may only be towed by vehicles that ensure the effective operation of the ABS!
Wheels and Tyres
235 / 75 R 17.5
manufacturer's choice
Steel rims in twin arrangement, factory silver
Electrics
24 Volt, multi-chamber lights, side-mounted yellow LED lighting
2 white front position lights
2 white/red rear marker lights
2 x 7-pin non-interchangeable plugs at the front, with connection cable
1 LED beacon with holder, switched via parking light (removable beacon)
2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm
Floor
Steel floor in the front section, incl.
followed by 70 mm softwood floor, wheel arch areas with steel/checkered plate covering
Rear bevel with 70 mm softwood floor
Low loader platform incl. rear bevel 8,200 mm
Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
covered with wood
with spring lift assistance
Operating Instructions
With 10,000 kg axle load an exemption permit is required, only indivisible loads possible!!!
The total weight stated is technically feasible; depending on the cargo, the total weight may not be achievable within the permitted axle, support, and fifth wheel loads (Poor driving and trailing behaviour possible due to incorrect load distribution)
Country of Approval / Plates
Country of approval: Germany Incl.
with Dekra approval and certificate (acco
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTL 300 Agrar
Çağrı
Koşul: yeni, makine/araç numarası: b50cac2c60a813b0968994fa0, boş ağırlık: 5.700 kg, azami yük ağırlığı: 18.300 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
- Steel welded construction
- Turntable with robust ball-bearing slewing ring
- Foldable rear support
- 2 wheel chocks with holders
- Full-width rear mudguards
- Prepared for extension to 3,000 mm (holes in the outer frame, not in the rear bevel)
Lashing Points Low-bed
- 1 pair of lashing cutouts recessed at the front in the longitudinal beam at the gooseneck, each rated for 10t
- 7 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated for 10t
- 1x at the front on the gooseneck
- 5x in the low-bed area
- 1x in the rear bevel
- 12 pairs of lashing holes in the outer frame, each rated for 5t (for tensioning strap hooks)
- 5x gooseneck, 6x low-bed, 1x rear bevel
Drawbar Hitch Turntable Trailer
- Drawbar with tested 40 mm towing eye
Axles & Suspension
- Drum brake axles, manufacturer’s choice
- Laser-aligned axles/chassis to reduce tire wear and fuel consumption
- Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balance)
Wheels and Tires
- 235 / 75 R 17.5 Fulda
- Steel twin wheels, factory silver
Brake System
- 2-line compressed air brake system
- Spring-loaded parking brake
- 2 confusion-proof coupling heads at the front, connection lines to tractor vehicle
- Connection lines approx. 60 cm extended
- Without ABS, but with mechanical ALB, max. 60 km/h permissible
Electrics
- 12 volts, multi-chamber lights, no side yellow LED lights, side reflectors
- 2 white position lights front
- 2 white/red lane marker lights rear
- 1x 7-pole 12-volt plug at the front, with connection cable, extended by approx. 60 cm
- 1 LED beacon with bracket, switched via parking light (removable beacon)
- 2 pairs of illuminated, extendable warning boards up to 3,000 mm
Floor
- Gooseneck front with steel / checker plate covering
- Toolbox recessed into drive-over slope at gooseneck
Fgedpfxsi Ri Ago Almjb
- Then 70 mm softwood floor, with steel / checker plate covering in wheel arch area
- Rear bevel with 70 mm softwood floor
- Low-bed platform including rear bevel: 5,900 mm
Loading Ramps
- Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
- Wood covered
- Supported by spring assist
Operating Instructions
- For 10,000 kg axle load, a special permit is required; only indivisible loads permitted!
- The specified total weight is technically possible; depending on the load, the permissible axle/support/saddle loads may not be achieved (poor tracking and maneuverability possible due to improper load distribution)
Country of Registration/Plates
- Country of registration: Germany
- With Dekra inspection and certificate, for max. 60 km/h approval, towing vehicle LoF (for Switzerland, max. 40 km/h possible)
- Prepared for two-line license plate holder
- No ECE R 048 compliant contour marking / reflective strips
Paintwork
- Frame: DB 7350 Novagrau
- 10-year warranty against rust-through
- Drawbar galvanized or black, manufacturer’s choice
- Loading ramps hot-dip galvanized
Note: Archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglVTS S Parab/Feder
Çağrı
Koşul: yeni, makine/araç numarası: 15431365fe5515297a6a9fb05, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty slewing ring
Foldable rear supports
2 wheel chocks with holders
Aluminum side underrun protection
Full-width rear mudflap
Half-shell mudguards for 1st and 2nd axles with anti-spray mudflaps behind each axle; anti-spray mudflaps in front of and behind the 3rd and 4th axles
Digger arm recess above the rear axles, extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep; 2 pairs of lashing holes (5 t each) in the digger arm recess, laterally on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear incline
1 plastic toolbox with shelf insert, W=620/H=360/D=440 mm, lockable with a padlock (padlock not included)
1 storage box recessed into neck section in the floor, with lid, W=720 mm / L=520 mm / D=170 mm
Extendable widenings to 3,000 mm
70 mm wooden planks for widening to 3,000 mm
Storage compartment for wooden planks under the loading area
Low-bed trailer lashing points (40 lashing options)
1 pair of 5 t lashing eyes on gooseneck
9 pairs of 10 t lashing pins, recessed into the top and side of the external frame
2 x on the front gooseneck
7 x in the low-bed area
6 pairs of 5 t lashing holes in the external frame of the low-bed (for hook-in tie-down straps)
3 additional pairs of foldable lashing eyes, each 10 t
1 x inside next to the main frame at the start of the low-bed
1 x on the gooseneck (overhanging)
1 x recessed in the floor behind the last axle
Trailer drawbar
Towing bar with tested 50 mm towing eye, 8° inclined towing eye, D-value at least 160 kN
Axles & Suspension
Drum brake axles
Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization front and rear (rocker compensation)
Wheels and tyres
235 / 75 R 17.5
Manufacturer’s choice
Steel rims, twin wheel configuration, factory silver
Brake system
2-line compressed air brake system
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front, with connection lines to towing vehicle
ABS and ALB, with ABS socket at the front, with connecting cable
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white position lights at the front
2 white/red tracking lights at the rear
Fjdpfx Alei Ri A Sjmegb
2 x 7-pin non-interchangeable plugs at the front, with connecting cable
1 LED beacon with holder, operated via parking lights (removable beacon)
2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm
Floor
Front gooseneck section with steel/chequer plate covering
Proceeding with 70 mm softwood flooring, steel/chequer plate covering in the wheel arch area
Rear incline with 70 mm softwood flooring
Loading ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Wood-covered
With spring lift assistance
Registration/country plates
Country of registration: Germany
24/7-Service Hotline
Prepared for two-line license plate holder
Conspicuity markings with reflective strips according to ECE R 048, side white and rear red
Warning panel according to ECE - 70
Paintwork
Frame hot-dip galvanized incl. passivation—15-year corrosion warranty
Towing bar galvanized or black, at manufacturer’s option
Ramps hot-dip galvanized
Note: These are archive photos!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglZTS 200 Mähdrescher
Çağrı
Koşul: yeni, makine/araç numarası: 6d88bda3a1ee2464a81b34f36, boş ağırlık: 4 kg, azami yük ağırlığı: 13 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
Steel welded construction, with slight central pre-camber, turntable with heavy-duty slewing ring, wheel chocks with holder, quarter-circle mudguards in front of and behind each axle.
Lashing Eyes for Low-Bed
Over front axle:
2 pairs of ring lashing eyes at 5t each, front at the gooseneck
Low-bed:
4 pairs of lashing eyes, side-mounted in the low-bed at 6t each
5 pairs of lashing eyes at 5t between the longitudinal beams
Drawbar / Turntable Trailer Coupling
Drawbar with certified 40 mm towing eye, mechanically length-adjustable and lockable in 6 x 100 mm steps
(Drawbar length 1,700 - 2,300 mm)
Axles & Suspension
BPW drum brake axles with 10t axle load each, automatic slack adjusters. Axle endurance braking test rated up to 105 km/h, rear axle manually removable. To remove: release air locking and lower the rear to the ground. Then disconnect the hoses at the rear module, insert the transport bar into one of the rear bushings, and, by gently pressing down and simultaneously pulling back, uncouple the rear (parking brake released). After loading or unloading, move the rear module into place and connect up to the marking. Then raise to driving height and reconnect hoses. Confirm bolt locking (visual check to ensure bolt locks) and test rear functionality.
Air suspension with raise/lower valve
Wheels and Tyres
235 / 75 R 17.5, from leading brands, steel rims in twin arrangement, factory silver finish
Braking System
2-line air brake system, spring-loaded parking brake, 2 fail-safe coupling heads front, with connecting lines to tractor unit, EBS (Electronic Braking System) with EBS plug front, incl. connection cable.
Attention: This trailer may only be towed by tractor vehicles capable of guaranteeing effective ABS operation!
Electrics
24-volt system, multi-chamber lights, yellow side LED lighting, 2 white position lights front, 2 white/red lane marker lamps rear, rotating beacon with holder, operated via parking light circuit (beacon removable), 2 pairs of warning plates, double LED illuminated, extendable up to 3,300 mm, removable with plug, 2 x 7-pin fail-safe plugs front with connection cable, 1 x 7-pin agricultural plug, voltage transformer 12/24 volts (for electrical system only, not ABS/EBS)
Floor
Steel/chequer plate floor on gooseneck, between longitudinal and cross members with perforated plate covering. Axle covers not drivable, extension to 3,000 or 3,300 mm possible.
Operating Notes
Note! For 10,000 kg axle load, special approval is required. Approval must be requested separately in each German federal state; a commitment for 20t gross weight is not guaranteed by law. Customer risk.
Special approval required if overall towing length exceeds 18,750 mm. Observe country-specific registration regulations.
The specified gross vehicle weight is technically feasible; depending on the load, gross weight may not be achievable while adhering to permissible axle, support, and fifth-wheel loads.
Observe BO-circle regulations!!!
Registration / Plates
Registration country: Germany, with Dekra inspection and report (according to §13 EC - FGV), prepared for single-line number plate holder, warning plate according to ECE-70, contour marking with reflective tape according to ECE R 048
Paintwork
Front frame hot-dip galvanized with passivation, rear frame RAL9006 silver, drawbar KTL black
Fedpfx Alei Ri N Aemjgb
Note: Archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS 300
Çağrı
Koşul: yeni, makine/araç numarası: f8fb99947a1c19bc4d63549ff, boş ağırlık: 6 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 24 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty ball bearing race
Foldable rear support
2 wheel chocks with holder
Side underrun protection made of aluminium
Full-width rear spray flaps
Half-shell fenders on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles
1 plastic tool box, with shelf, w=620/h=360/d=440 mm, lockable with padlock (padlock not included)
Extendable widening to 3,000 mm (not at the rear chamfer) (the track width of machines or vehicles to be transported must not exceed 2,550 mm outer frame width)
Central storage compartment for wooden beams on the loading area
70 mm wooden beams for widening to 3,000 mm
Lashing points on low loader
1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated 5t
7 pairs of mushroom lashing points, recessed at top and side in outer frame, each rated 10t
1x at the front on the gooseneck
6x in the drop deck
First lashing point 250 mm from front, last max. 250 mm from rear, distance between lashing eyes not greater than 1,100 mm
5 pairs of stake pockets recessed in side frame, internal dimension 70 x 40 mm (convertible for 5t ring lashing eyes, not included)
2 pairs of additional fold-down lashing eyes, each rated 10t
1x on the gooseneck (projecting)
1x recessed in the floor behind the last axle
Trailer turntable drawgear
Drawbar with certified 40 mm towing eye
Axles & Suspension
SAF drum brake axles
Axle/chassis laser alignment to reduce tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (equalising rocker)
Wheels and Tyres
235 / 75 R 17.5
Manufacturer's choice with M&S marking
Steel wheels in twin arrangement, factory silver
Brake System
2-line compressed air braking system
Spring-loaded parking brake
2 non-interchangeable coupling heads at front, with connection lines to the towing vehicle
ABS and ALB, with ABS connector at front, with connection cable
Brand: Wabco or Knorr
Note: This trailer may only be towed by vehicles which ensure the proper functioning of the ABS!
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white front position lights
2 white/red rear outline marker lights
2 x 7-pin non-interchangeable plugs at front, with connection cable
1 LED rotating beacon with holder, switched via parking lights (removable beacon)
2 pairs of warning panels, double LED illuminated and extendable to 3,000mm
Floor
Gooseneck at front with steel/chequer plate covering
Storage box recessed on the transition slope to gooseneck
After that, 70 mm softwood floor, steel/chequer plate covering in wheel arch area
Rear slope with 70 mm softwood floor
Low-bed platform including rear slope 6,500 mm
Loading ramps
Fgedei Riwfjpfx Almeb
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
Additional ramp safety support, foldable underneath (prevents lateral slipping of the ramps, not in conjunction with hydraulic side ramp shift)
Wooden inlay on ramps
Spring lifting assistance
Operating instructions
At 10,000 kg axle load, an exemption permit is required, only indivisible loads possible!!!
The stated total weight is technically possible; depending on the load, the gross weight may not be achievable while adhering to permissible axle, support, and kingpin loads. (Poor driving and trailing behaviour may result from incorrect load distribution)
Country of registration/Plates
Country of registration: Germany
Approval according t
Küçük ilan
Triptis
2.248 km
Platform açık
FlieglSZS 310 Jumbo Plateau Holz
Çağrı
Koşul: yeni, makine/araç numarası: e7fbe178b85a202cade7e95af, boş ağırlık: 5 kg, azami yük ağırlığı: 22 kg, toplam ağırlık: 29 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis: Semitrailer for Forwarding Operators
Fine-grain structural steel welded construction, fifth wheel plate with replaceable 2" kingpin, with two kingpin positions.
Outer frame slightly inclined with Load-Lock profile for lashing strap hooks.
Note! To hook lashing straps in combination with side walls, the side walls must be opened!
2 pairs of lashing eyes recessed in the gooseneck outer frame, each rated at 5 tonnes.
8 pairs of lashing eyes recessed in the outer frame at the lowbed area, each rated at 5 tonnes.
24-ton 2-speed landing gear, single-sided operation, with straight base, without compensating mechanism.
2 wheel chocks with holder.
Aluminum side underrun protection.
Steel rear underrun protection.
Quarter-shell mudguards in front of and behind axle assembly.
2 stainless steel toolboxes, width=600/height=400/depth=500 mm, with polished, lockable door.
2 pairs of stake pockets recessed in the gooseneck outer frame, inner dimension 70 x 40 mm.
6 pairs of stake pockets recessed in the outer frame at the lowbed area, inner dimension 70 x 40 mm.
Internal width between stakes: 2420 mm!
3 lashing/stake rails in the lowbed, transversely embedded in the floor, over the entire width to the outer frame (usable internal width between outer removable stakes approx. 2170 mm), approx. 100 mm high; with 20 mm round steel bars, top and bottom, spacing between bars approx. 60 mm. Bottom finished with angle sheet, half open downward. Suitable for lashing and inserting stakes 80 x 80 mm.
Removable stakes, width=80/depth=50/length=1200 mm, hot-dip galvanized.
Removable stakes, width=80/depth=80/length=1200 mm, hot-dip galvanized.
Note: Stake pockets/removable stakes are not intended for the sole securing of long materials, pipes, etc. without additional lashing.
Mechanical rear extension with hand crank, extendable by approx. 1,500 mm, lockable every 500 mm. Comes with support beam, load capacity over the entire width: 2,000 kg at 500 mm, 1,000 kg at 1,000 mm, and 500 kg at 1,500 mm. Includes retractable rear underrun protection with lighting.
2 pairs of removable stakes, width=80/depth=80/length=1200 mm, hot-dip galvanized.
Open storage compartment for removable stakes, at the front wall or under the loading area (for 10 removable stakes 80 x 50 x 1200 mm and 4 removable stakes 80 x 80 x 1200 mm).
Axles + Suspension
SAF drum brake axles.
Fgodpfx Alji Ri Hvsmsb
Axle/chassis laser alignment - reduces tire wear and fuel consumption.
Last axle is self-steering with automatic reverse lock via reverse light, and additional lock function on the vehicle via hand knob.
Air suspension with raise & lower valve.
Wheels and Tires
235 / 75 R 17.5
Manufacturer's choice.
Steel twin wheels, factory silver.
Braking System
2-line compressed air brake system.
Spring-loaded parking brake.
2 foolproof coupling heads at the front, without connecting line.
EBS, electronic braking system with EBS socket at the front, without connecting cable.
Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!
Axle load detection via EBS CAN bus signal for display in the truck cab. The truck must be correspondingly equipped; no truck installation or calibrated weighing system included.
Electrics
24 Volt, multi-chamber tail lights, yellow LED side marker lights.
2 white position lights at the front.
2 white/red track marker lights at the rear.
2 x 7-pin sockets at the front, without connecting cable.
2 additional LED work lights at the rea
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglVTS 400
Çağrı
Koşul: yeni, makine/araç numarası: f79a9f15e7131d57a512793ab, boş ağırlık: 8.900 kg, azami yük ağırlığı: 15.100 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-loader Trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear supports
2 wheel chocks with holders
Side underrun protection in aluminium
Rear spray flaps over the entire width
Quarter shell mudguard in front of the 1st axle
Extendable side extensions to 3,000 mm (not in rear chamfer area)
(The track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm)
Storage compartment for timber planks in the middle of the loading platform
70 mm timber planks for extension to 3,000 mm
Lashing eyes low-loader
1 pair of lashing eyes on the gooseneck, each with 5 t capacity
Fsdpfx Alji Ri Izemogb
9 pairs of lashing mushrooms recessed in top and side of outer frame, each with 10 t capacity
2 x on the gooseneck front
7 x in the low bed
6 pairs of lashing holes in the outer frame of the low bed, each with 5 t capacity
(for attaching tie-down straps)
Coupling Device for Turntable Trailer
Drawbar with certified 50 mm towing eye
Axles/Suspension
SAF drum brake axles
Laser-aligned axles/chassis - reduces tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical inclusion
Axle load compensation front and rear (rocker balance)
Wheels and Tyres
235 / 75 R 17.5
Manufacturer’s choice
Steel twin wheels, factory silver
Braking System
2-line compressed air braking system
Spring-loaded parking brake
2 fail-safe coupling heads at the front, with connection lines to the towing vehicle,
ABS and ALB, with ABS plug at the front, with connection cable
Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS!
Electrics
24 volt, multi-chamber lamps, yellow LED side lights
2 white position lights at the front
2 white/red lane marker lights at the rear
1 LED beacon with bracket, switched via parking lights (removable lamp)
2 pairs of double warning boards, LED illuminated, extendable to 3,000 mm
2 x 7-pin fail-safe plugs at the front, with connection cable
Floor
Gooseneck front with steel/checker plate
then with 70 mm softwood floor, in the wheel arch area with steel/checker plate
Rear ramp with 70 mm softwood floor
Loading Ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
timber-covered
Hydraulically operated via tractor power take-off with throttle, control on the left side at the front
Hydraulic connection with SVK plug NW 10/3, incl. hose
Operating Instructions
For an axle load of 10,000 kg, a special permit is required, only indivisible loads allowed!!!
The specified total weight is technically possible, but depending on the cargo, the total weight may not be achieved within the permissible axle/support/saddle loads. (Poor driving and trailing behaviour possible due to incorrect load distribution)
Registration Country / Plates
Registration country: Germany
with Dekra acceptance and report (according to §13 EC - FGV)
24/7 service hotline included
prepared for double-line license plate holder
Contour marking with reflective tape pursuant to ECE R 048, white on the sides and red at the rear
Paintwork
Frame DB 7350 Novagrau
10 year warranty against rust-through
Drawbar galvanised or black, at manufacturer's discretion
Loading ramps hot-dip galvanised
Küçük ilan
Bovenden
2.411 km
Alçak şasi dorse
Göbel LPRS 24, 3-A-Tieflader, Verzinkt,
Çağrı
Koşul: ikinci el, boş ağırlık: 8.370 kg, azami yük ağırlığı: 34.630 kg, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2021, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 1.020 mm, süspansiyon: hava, lastik boyutu: 445/45R19.5, renk: gri, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç yeri: Bovenden, 3 dingil, SAF dingiller, havalı süspansiyon, 1. dingil kaldırılabilir, son dingil takipli yönlendirmeli, ABS (anti blokaj sistemi), sabitleme halkaları, kaldırma & indirme fonksiyonu, ilave edilebilir çıkış rampaları, arka destek, ayaklar, alet kutusu.
Üst yapı: Göbel alçak şasi, 43.000 . eklenebilir rampalar (güçlendirilmiş versiyon) 1.800,00 € net ek ücretle temin edilebilir!
Yükleme alanı: Kuğu boynu 4.500 mm, yatak uzunluğu 9.100 mm, 1. dingil kaldırma yardımcılı, 28 mm mühürlü sert ağaç zemin, her biri 8.000 kg'lık 25 çift ağır yük sabitleme halkası gömme yerleştirilmiş, sapan kancalı kayışlar için yan panel ~500 mm aralıklı ve 5.000kg taşıma kapasiteli, soket kasaları, 80 mm soket direkleri, sıcak daldırma galvanizli şasi, ek ücret karşılığında uygun çekici 2648 LK (17697) ve balast kasası (17699) ile birlikte satılabilir!
Fgjdpjyhraksfx Almob
Yaklaşık 54.160 km kullanılmıştır!
Yükleme yüksekliği yaklaşık 1.020 mm! AKSESUAR BİLGİLERİ GARANTİ EDİLMEZ, değişiklik, ara satış ve hata hakkı saklıdır!
Küçük ilan
Ahaus
2.615 km
Pres freni - hidrolik
ATLANTICHPAT 40.300
Çağrı
Koşul: iyi (kullanılmış), Üretim yılı: 1991, Press force 300 t
Bending length 4100 mm
Clearance between uprights 3710 mm
Stroke – infinitely adjustable 250 mm
Throat depth 330 mm
Installation height 500 mm
Table height 940 mm
Table width 250 mm
Working speed 7.0 mm/sec
Return speed 90.0 mm/sec
Control – conventional
Max. operating pressure 305 bar
Voltage 380 V
Total power requirement 22.5 kW
Weight 25,200 kg
Dimensions (L x W x H) 4320 x 2100 x 3500 mm
Well-maintained condition (!!)
- Inspected condition - Machine video -
?v=rPOBwTfVReo
Equipment:
- Simple, conventional hydraulic press brake
Fgjdpfx Asxab I Tolmob
- Swiveling control panel, front left
- Electromechanical backgauge (X-axis)
* Adjustment via front control panel (pushbutton)
* With analog position display
* Fine adjustment via hand wheel, front
- With 3x backgauge fingers, manually adjustable
- Electromechanical depth stop (Y1+Y2 axis)
* With analog position display
- 1x segmented gooseneck upper tool 85°
- 1x MultiV universal die block with multiple V-openings
- 2x front, sturdy support arms
- 1x movable double foot switch
- 1x movable two-hand control
- Side safety device (swiveling doors)
- Rear safety device (sliding door)
- Original operating manual
Küçük ilan
Ahaus
2.615 km
Pres freni - hidrolik
BAYKALAPH-S 1254 x 35
Çağrı
Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2003, Press force: 35.0 t
Bending length: 1,250 mm
Distance between uprights: 1,095 mm
Fgsdpfxox Dc Uvj Almeb
Stroke – infinitely adjustable: 215 mm
Throat depth: 410 mm
Table height: 800 mm
Installation height: 455 mm
Working speed: 10.0 mm/sec
Return speed: 56.0 mm/sec
Working height approx. 875 mm
Control: DM 51
Operating hours: approx. 13,300 h
Oil capacity: 80.0 l
Max. operating pressure: 240 bar
Voltage: 380 V
Total power requirement: 4.0 kW
Weight: 2,500 kg
Dimensions (L x W x H): 1,700 x 1,450 x 2,250 mm
- Inspected condition - Machine video available -
v=Gn6PZEMmnmY
Equipment:
- Robust CNC-controlled hydraulic press brake
- With DELEM CNC control unit "DM 51"
* Backgauge positioning (X axis)
* Positioning of depth setting (Y1+Y2 axes)
* Program + tool storage possible
* Swiveling control panel at the front left
- CNC electro-motorized backgauge (X axis)
- CNC electro-motorized height adjustment of the backgauge (R axis)
- 2x manually adjustable backgauge fingers
- 1x segmented gooseneck punch – upper tool
- 1x segmented Multi V die – lower tool (16/22/35/50 mm)
- Lateral safety device (swiveling doors)
+ FIESSLER laser safety device
- Rear safety device (swiveling door)
- 1x movable double foot switch
- 2x front support arms
- Operating manual for the machine + CE declaration
Küçük ilan
Ahaus
2.616 km
Pres freni - hidrolik
ERMAKECO BEND EXPERT 26.80
Çağrı
Koşul: yeni, Pressing force 80.0 t
Bending length 2600 mm
Frame gap 2200 mm
Throat depth 250 mm
Ram speed 90.0 mm/sec
Working speed 7.5 mm/min
Return speed 60.0 mm/sec
Stroke length 160 mm
Installation height 380 mm
Table height 900 mm
Oil capacity 150 ltr
Operating voltage 400 Volt
Weight 5227 kg
Dimensions (LxWxH) 3750 x 1950 x 2400 mm
-----
ECO EXPERT CNC electro-hydraulic press brake featuring:
* DELEM CNC control system
* CNC-controlled axes: Y1 + Y2 + X axis
Fedpjxaafwjfx Almjgb
* Manual crowning of the bottom table
-----
Specifications:
- CNC electro-hydraulic press brake
- DELEM CNC control, model "DA-58T"
* Swiveling operator panel, front left
- CNC-controlled axes: Y1 - Y2 and X
- CNC electric-motorized back gauge
* X axis travel: 800 mm
* X axis travel speed: 230 mm/s
* Ball screw drive
- ROLLERI gooseneck upper tool "PS 135.85-R08", system "A"
* With quick-change clamping system
* Includes crowning device in the tool holder
- ROLLERI segmented universal die block "M 460 R"
* Includes 1x die shoe "C 1050-R"
- Manual crowning with analog value display
- FIESSLER AKAS laser safety device in front of the machine (including FPSC)
- Light curtain behind the machine
- 2x stable front support arms
- SIEMENS electrical equipment
- BOSCH/HOERBIGER hydraulic system
- CE marking / Declaration of Conformity
- Operating manual including electrical & hydraulic circuit diagrams
Küçük ilan
Ahaus
2.616 km
Pres freni - hidrolik
ERMAKSPEED BEND PRO 3.175
Çağrı
Koşul: yeni, Press force 175 t
Bending length 3,100 mm
Frame gap 2,600 mm
Frame throat 410 mm
Ram speed 180 mm/sec
Working speed 12.0 mm/min
Return speed 190 mm/sec
Stroke 275 mm
Daylight opening 550 mm
Oil capacity 300 ltr.
Table height 900 mm
Table width 90.0 mm
Operating voltage 400 Volt
Total power requirement 15.0 kW
Weight 9,800 kg
Dimensions (L-W-H) 4,150 x 2,150 x 2,800 mm
The SPEED BEND PRO press brake from ERMAK is an extremely versatile, productive, and precisely controlled machine available in various bending lengths from 1,270 mm to 6,000 mm. It offers a wide range of press capacities from 40–1,500 tonnes to meet your individual requirements. This CNC-controlled press brake can also be configured as a tandem machine, providing you with maximum flexibility in bending lengths. It features numerous functions to ensure simple and safe operation. Its robust machine concept combined with precision CNC control delivers long-lasting and reliable performance. Furthermore, the machine offers an array of expansion and equipment options for customized adaptation to your requirements. The DELEM DA graphical CNC control allows for convenient operation via touchscreens and offers a comprehensive safety package. The machine is easily operated using an LCD touchscreen mounted on the left-side swing arm. Bending operations are initiated using a footswitch. In addition to this safety measure, the operator is protected by a safety laser in the working area and a rear light curtain. The CNC control automatically calculates the pressing force, bending tolerance, crowning settings, embossing force, and tool safety zones.
-----
SPEED BEND PRO electro-hydraulic press brake with:
* increased daylight opening
* extended cylinder stroke
* larger throat depth
-----
Equipment:
- DELEM CNC control model "DA-66T" graphic/touchscreen
Fgjdpfx Ajxabfxslmsb
* 2D graphical touchscreen programming mode
* 3D visualization in simulation and production
* 17" high-resolution color TFT screen
* Bend sequence calculation
* Product programming and full-scale display
* USB interface
- Swiveling touchscreen control unit mounted front left
- CNC-controlled axes: Y1 – Y2 – X – R – Z1 and Z2, as well as CNC crowning
- CNC electro-motorized backgauge
* Travel range: X axis .. 800 mm // R axis .. 250 mm
* Travel speed: X axis .. 500 mm/s // R axis .. 350 mm/s
* On ball screw spindles
* CNC-controlled electro-motorized stop fingers Z1 + Z2
- Segmented gooseneck top tool: ROLLERI 135.85.R08, "System A"
* Including quick-change clamping
* Including crowning device in the tool holder
- ROLLERI segmented universal die block M 460 R
* Including 1x die shoe C 1050-R
- Rear safety device: light curtain
- BOSCH/HOERBIGER hydraulic components
- SIEMENS electrical components
- FIESSLER AKAS laser safety device in front of the machine (incl. FPSC)
- 2x front support arms with SLIDING system (HIWIN linear bearings)
- 1x freely movable double...
Küçük ilan
Ahaus
2.616 km
Pres freni - hidrolik
ERMAKSPEED BEND PRO 4.320
Çağrı
Koşul: yeni, Press force: 320 t
Bending length: 4100 mm
Frame width: 3600 mm
Throat depth: 410 mm
Ram speed: 140 mm/sec
Working speed: 10.5 mm/sec
Return speed: 150 mm/sec
Stroke: 375 mm
Installation height: 650 mm
Table height: 900 mm
Table width: 220 mm
Oil capacity: 400 l
Operating voltage: 400 Volt
Total power requirement: 30.0 kW
Weight: 22,064 kg
Dimensions (HxWxD): 5350 x 2450 x 3150 mm
The SPEED BEND PRO press brake from ERMAK is an extremely versatile, productive, and precisely controlled machine, available in a range of bending lengths from 1,270 mm up to 6,000 mm. It offers a broad selection of press forces from 40 to 1,500 tons to meet your specific needs. This CNC-controlled press brake can also be expanded as a tandem machine, providing you with great flexibility regarding bending lengths. It is equipped with numerous features to ensure simple and safe operation. The robust machine concept, combined with precise CNC control, ensures durable and reliable performance. Additionally, the machine offers a variety of expansion and customization options to tailor it to your requirements. The DELEM DA CNC graphic controller allows convenient operation via touchscreens and offers a comprehensive safety package. The machine is easily operated via an LCD touchscreen mounted on the left swing arm. Bending operations are initiated by actuating a foot switch. In addition to this safety measure, the operator is protected by a safety laser in the working area and a rear light curtain. Using the CNC control, press force, bending tolerance, crowning setting, embossing force, and tool safety zones are automatically calculated.
---
SPEED BEND PRO electro-hydraulic press brake with:
* Increased installation height
* Extended cylinder stroke
* Increased throat depth
---
Equipment:
- DELEM CNC control model "DA-66T" graphic touchscreen
* 2D graphic touchscreen programming mode
* 3D representation in simulation and production
* 17" TFT color screen with high resolution
* Bending sequence calculation
* Product programming and display in actual size
* USB interface
- Swiveling touchscreen control unit, front left
- CNC-controlled axes: Y1 - Y2 - X - R - Z1 and Z2, and CNC crowning
- CNC electro-motor driven backgauge
* Travel: X axis: 800 mm // R axis: 250 mm
* Travel speed: X axis: 500 mm/s // R axis: 350 mm/s
* On ball screws
* CNC-controlled electro-motor stop fingers Z1 + Z2
- Split gooseneck upper tool: ROLLERI 135.85.R08, "System A"
* Including quick-change clamping
* Including crowning device in the tool holder
- 1x universal reversible die block
- Rear safety device: light curtain
- BOSCH/HOERBIGER hydraulic components
- SIEMENS electrical components
- FIESSLER AKAS laser safety device in front of the machine (incl. FPSC)
- 2x front support arms with SLIDING system (HIWIN linear bearings)
Fodpfexaba Njx Almsgb
- 1x freely movable dual foot switch
- CE mark / Declaration of Conformity
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Ahaus
2.616 km
Pres freni - hidrolik
ERMAKPOWER BEND PRO 37.220
Çağrı
Koşul: yeni, Press force: 220 t
Fgsdpfsw U U Rrox Almjb
Bending length: 3760 mm
Frame gap: 3250 mm
Throat depth: 410 mm
Ram speed: 180 mm/sec
Working speed: 10.0 mm/sec
Return speed: 160 mm/sec
Stroke: 275 mm
Installation height: 550 mm
Table height: 900 mm
Table width: 160 mm
Oil capacity: 300 liters
Operating voltage: 400 Volt
Total power requirement: 18.5 kW
Weight: 12,906 kg
Dimensions (L x W x H): 5100 x 2250 x 2900 mm
The POWER BEND PRO press brake from ERMAK is an extremely versatile, productive, and precisely controlled machine, available in various bending lengths from 1,270 mm up to 6,000 mm. It offers a wide range of press forces from 40 to 400 tons to meet your individual requirements. This CNC-controlled press brake can also be extended as a tandem machine, providing great flexibility in bending lengths. It features numerous functions that ensure easy and safe operation. The robust machine design, combined with precise CNC control, guarantees long-lasting and reliable performance. Furthermore, the machine offers a variety of expansion and equipment options to customize it to your specific needs. The DELEM DA CNC graphic control enables convenient operation via touchscreen and includes a comprehensive safety package. The machine can be operated easily via an LCD touchscreen mounted on the left swing arm. Bending operations are initiated by a foot switch. In addition to this safety feature, the user is protected by a safety laser in the working area and a rear light barrier. Via the CNC control, pressing force, bending tolerance, crowning setting, embossing force, and tool safety zones are all calculated automatically.
-----
POWER BEND PRO electro-hydraulic press brake with:
* Increased installation height
* Extended cylinder stroke
* Larger throat depth
-----
Equipment:
- CNC electro-hydraulic press brake
- DELEM CNC control model "DA-58T" graphic/touchscreen
* 2D graphical programming
* 15" high-resolution TFT color screen
* Bending sequence calculation
* Product programming and display in actual size
* USB interface
- CNC-controlled axes: Y1 - Y2 - X - R
- CNC electro-motorized back gauge
* Back gauge with R-axis, on recirculating ball screws
* Travel: X = 800 mm // R = 250 mm
* Travel speed X axis: 230 mm/s
* With 2x manually adjustable stop fingers
- ROLLERI gooseneck upper tool "PS 135.85-R08", system "A"
* incl. quick-change clamp
* incl. crowning device in the tool holder
- 1x universal reversible die block
- Rear safety device: light barrier
- BOSCH/HOERBIGER hydraulic components
- SIEMENS electrical components
- FIESSLER AKAS laser safety device in front of the machine (incl. FPSC)
- 2x front support arms with SLIDING system (HIWIN linear bearings)
- 1x free-moving double foot pedal
- CE marking / Declaration of Conformity
- Operating manual including wiring and hydraulic diagrams
Küçük ilan
Ahaus
2.616 km
Pres freni - hidrolik
ERMAKPOWER BEND PRO 26.100
Çağrı
Koşul: yeni, Pressure 100 t
Bending length 2600 mm
Frame gap 2200 mm
Throat depth 410 mm
Ram speed 200 mm/sec
Working speed 9.5 mm/sec
Return speed 155 mm/sec
Stroke 275 mm
Open height 530 mm
Table height 900 mm
Table width 90.0 mm
Oil capacity 150 ltr.
Operating voltage 400 Volt
Total power requirement 7.5 kW
Weight 6850 kg
Dimensions (LxWxH) 3750 x 1950 x 2800 mm
The POWER BEND PRO press brake from ERMAK is an extremely versatile, productive, and precisely controlled machine, available in various bending lengths from 1,270 mm up to 6,000 mm. It offers a wide range of press forces from 40 to 400 tons to meet your specific requirements. This CNC-controlled press brake can also be expanded as a tandem machine, providing you with maximum flexibility in bending lengths. It is equipped with numerous features ensuring simple and safe operation. The robust machine design combined with precise CNC control guarantees durable and reliable performance. Furthermore, the machine offers a variety of expansion and equipment options for customized configuration to your needs. The DELEM DA CNC graphical control allows for convenient operation via touchscreen and provides a comprehensive safety package. The machine can be easily controlled using the LCD touchscreen mounted on the left swing arm. Bending operations are initiated by actuating a foot switch. In addition to this safety device, the operator is protected by a safety laser in the work area and a rear light curtain. The CNC control automatically calculates pressing force, bend tolerance, crowning adjustment, embossing force, and tool safety zones.
-----
POWER BEND PRO electro-hydraulic press brake with:
* increased daylight opening
Fgodexaaqyepfx Almeb
* increased cylinder stroke
* increased throat depth
-----
Equipment:
- CNC electro-hydraulic press brake
- DELEM CNC control model "DA-58T" graphics/touchscreen
* 2D graphical programming
* 15" high-resolution TFT color screen
* Bend sequence calculation
* Product programming and real-size display
* USB interface
- CNC-controlled axes: Y1 - Y2 - X - R
- CNC electro-motorized backgauge
* Backgauge with R-axis, on ball screws
* Travel range: X = 800 mm // R = 250 mm
* X-axis travel speed: 230 mm/s
* with 2x manually adjustable backgauge fingers
- ROLLERI gooseneck top tool "PS 135.85-R08", system "A"
* Including quick-change clamping
* Including crowning device in the tool holder
- ROLLERI segmented universal die block "M 460 R"
* Including 1x die holder "C 1050-R"
- Rear safety device: light curtain
- BOSCH/HOERBIGER hydraulic components
- SIEMENS electrical components
- FIESSLER AKAS laser safety device in front of the machine (incl. FPSC)
- 2x front support arms with SLIDING system (HIWIN linear guides)
- 1x movable double foot switch
- CE mark / Declaration of conformity
- Operating manual including electrical & hydraulic schematic diagrams
Küçük ilan
Ahaus
2.616 km
Pres freni - hidrolik
ERMAKPOWER BEND PRO 12.40
Çağrı
Koşul: yeni, Pressure: 40.0 t
Bending length: 1270 mm
Distance between uprights: 1050 mm
Throat depth: 350 mm
Installation height: 387 mm
Stroke: 170 mm
Table height: 850 mm
Back gauge - adjustable: 800 mm
Adjustment speed: 230 mm/min
Approach speed: 140 mm/sec
Working speed: 10.0 mm/sec
Return speed: 170 mm/sec
Total power requirement: 5.5 kW
Machine weight approx.: 3220 kg
Space requirement approx.: 2150 x 1650 x 2300 mm
The POWER BEND PRO press brake by ERMAK is an extremely versatile, productive and precisely controlled machine, available in various bending lengths from 1,270 mm up to 6,000 mm. It offers a wide range of press forces from 40 to 400 tons, meeting your individual requirements. This CNC-controlled press brake can also be extended as a tandem machine, providing great flexibility in bending lengths. It features numerous functions that ensure easy and safe operation. The robust machine design, combined with precision CNC control, guarantees long-lasting and reliable performance. In addition, the machine offers a variety of options for expansion and equipment, allowing you to tailor it to your specific needs. The DELEM DA CNC graphic control enables convenient operation via touchscreen and offers a comprehensive safety package. The machine can easily be operated via an LCD touchscreen mounted on the left swivel arm. Bending operations are triggered by actuating a foot switch. In addition to this safety feature, the operator is protected by a safety laser in the working area and a rear light barrier. The CNC controller automatically calculates press force, bending tolerance, crowning adjustment, coining force, and tool safety zones.
-----
POWER BEND PRO electro-hydraulic press brake featuring:
* Increased installation height
* Extended cylinder stroke
* Enlarged throat depth
-----
Equipment:
- CNC electro-hydraulic press brake
Fodpfx Alsw U U Rlsmjgb
- DELEM CNC control model "DA-58T" with graphic/touchscreen
* 2D graphic programming
* 15" high-resolution color TFT display
* Bending sequence calculation
* Product programming and life-size representation
* USB interface
_ CNC controlled axes: Y1 - Y2 - X - R
- CNC electro-motorized back gauge
* Back gauge with R-axis, on ball screw spindles
* Travel range: X = 800 mm // R = 250 mm
* X-axis traverse speed: 230 mm/s
* With 2x manually adjustable gauge fingers
- ROLLERI gooseneck top tool "PS 135.85-R08", system "A"
* Including quick-change clamping
* Including crowning device in the tool holder
- ROLLERI segmented universal die block "M 460 R"
* Including 1x die shoe "C 1050-R"
- Safety device at the rear: light barrier
- BOSCH/HOERBIGER hydraulic components
- SIEMENS electrical components
- FIESSLER AKAS laser safety device at the machine front (incl. FPSC)
- 2x front support arms with SLIDING system (HIWIN linear bearings)
- 1x free-moving double foot pedal
- CE mark / Declaration of conformity
- Operating manual including wiring & hydraulic diagrams
Küçük ilan
Ahaus
2.616 km
Pres freni - hidrolik
ERMAKSPEED BEND PRO 4.400
Çağrı
Koşul: yeni, Pressure 400 t
Bending length 4100 mm
Distance between frames 3550 mm
Throat depth 510 mm
Ram speed 110 mm/sec
Working speed 8.4 mm/sec
Return speed 130 mm/sec
Stroke 375 mm
Installation height 650 mm
Table height 1000 mm
Table width 240 mm
Backgauge - adjustable max. 800 mm
Oil capacity 400 ltr.
Operating voltage 400 Volt
Total power requirement 30.0 kW
Weight 26,409 kg
Dimensions L-W-H 5450 x 2650 x 3470 mm
The SPEED BEND PRO press brake from ERMAK is an extremely versatile, productive, and precisely controlled machine available in various bending lengths from 1,270 mm up to 6,000 mm. It offers a wide selection of press forces from 40 to 1,500 tons to meet your individual requirements. This CNC-controlled press brake can also be expanded as a tandem machine, giving you substantial flexibility with bending lengths. It is equipped with numerous features that ensure simple and safe operation. The robust machine design, combined with precise CNC control, guarantees long-lasting, reliable performance. Additionally, the machine offers a range of extension and equipment options, allowing it to be tailored to your specific needs. The DELEM DA CNC graphic control allows convenient operation via touchscreens and includes a comprehensive safety package. The machine can be easily controlled through an LCD touchscreen mounted on the left swing arm. Bending operations are initiated using a foot switch. In addition to this safety feature, the operator is protected by a safety laser in the working area and a rear light curtain. The CNC control of the press brake automatically calculates press force, bending tolerance, crowning adjustment, embossing force, and tooling safety zones.
-----
SPEED BEND PRO electro-hydraulic press brake with:
* Increased installation height
* Increased ram stroke
* Increased throat depth
-----
Equipment:
- DELEM CNC control model 'DA-66T' graphic/touchscreen
* 2D graphical touchscreen programming mode
* 3D visualization in simulation and production
* 17" color TFT display with high resolution
* Bending sequence calculation
* Product programming and display in actual size
* USB interface
- Swiveling touchscreen control unit, front left
- CNC-controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning
- CNC electro-motorized backgauge
* Travel distance: X axis .. 800 mm // R axis .. 250 mm
* Travel speed: X axis .. 500 mm/s // R axis .. 350 mm/s
* with ball screw spindles
* CNC-controlled electro-motorized backgauge fingers Z1 + Z2
- Segmented gooseneck punch: ROLLERI 135.85.R08, 'System A'
* including quick-change clamping
* including crowning device in the tool holder
Fedpfxexaadto Almjgb
- 1x universal reversible die block
- Safety device at rear: light curtain
- BOSCH/HOERBIGER hydraulic components
- SIEMENS electrical components
- FIESSLER AKAS laser safety device in front of the machine (incl. FPSC)
- 2x front support arms with SLIDING system (HIWIN linear bearings)
- 1x freely movable double foot switc...
Sizin için aramayı kolaylaştırıyoruz: "gooseneck gooseneck"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay









































































































































































