Kullanılmış Mbo Für K/T 76 satın al (86.350)

Koşul: yeni, makine/araç numarası: eca976917d325d4adc41b69e8, boş ağırlık: 7.200 kg, azami yük ağırlığı: 27.800 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r 22,5, Further information Chassis semi-trailer for freight forwarding High-strength fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, main frame reinforcement for 25 t at the center of gravity over 3 m loading length when retracted. 13 pairs of hooks for lashing strap attachment welded to the crossmembers 23 pairs of lashing rings recessed into the outer frame, each rated for 3.5 t Outer frame with load-lock profile for lashing strap attachment Note! Not usable with side walls! 24 t 2-speed landing gear in reinforced version for unhitching while loaded, single-sided operation, with semi-circular lower section and straight mounting plate, with thrust compensation Wheel chocks with holders Aluminum side underrun protection Rear underrun protection Half-shell mudguards With anti-spray mud flaps in accordance with EU regulations 1 spare wheel carrier for 1 spare wheel, with wheel fastening kit 1 stake storage box, closed at the sides, open at the top, below the loading area, doors on both sides, W=450 mm/H=400/420 mm/D=2460 mm 6 pairs of extendable stake pockets for square tube stanchions 80x80 mm, extendable from loading width 2000 mm to 3100 mm 4 pairs of stake pockets recessed in the outer frame for square tube stanchions 80x80 mm 11 stake pockets centrally recessed in the floor for square tube stanchions 80x80 mm, with reinforcement beams, installed between the outer stake pockets 5 x 3 pairs of stake pockets on the outer longitudinal beams for square tube stanchions 80x80 mm, including reinforcement beams – for load securing to the front and rear during transport of reinforcing steel mesh, 2x5000 mm or 2x6000 mm 6 lightweight plug-in stanchions W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized, top with cable guides for strap tensioning 12 lightweight plug-in stanchions W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized with lashing rings welded to both sides at the bottom Note: Stake pockets/plug-in stanchions are not designed for sole securement of long materials, pipes, etc. without additional lashing 2 plastic tool boxes, with drawer and shelf, W=650/H=520/D=670 mm, lockable with a padlock (lock not included) 6 reinforcing steel winches with wire cable and counter hook, with cable feed-through in the outer frame, 1 removable plug-in gearbox for reinforcing steel winches supplied loose (without frame mounting) Telescoping Main frame telescopic, extendable by max. 4000 mm and lockable at approx. every 500 mm Locking with pneumatic bolt locking + frame locking indicator on both sides, operation via manual button, control for brake/locking and suspension on driver’s side, ahead of the axles Storage compartment between longitudinal beams when extended Axles & Suspension SAF disc brake axles with 430 mm disc diameter Rear axle is self-steering, with automatic reverse lock via reversing light, with additional lock function on the trailer via hand button, and manual override in the tractor unit (pin 10), no truck installation required. Dodpfx Alji Ri Szsmjkl Offset axle spacing mm Air suspension 1st axle with automatic lift, also electrically controllable from the truck, with starting aid, no truck installation required (starting aid functional up to 30% axle overload and max. speed of 25 km/h) Brake System 2-line compressed air brake system Color-coded line routing for easy servicing Spring-actuated parking brake 2 error-proof coupling heads at the front, without connectio

Koşul: yeni, makine/araç numarası: 56c59c8aba35227ffb44c9f75, boş ağırlık: 11.350 kg, azami yük ağırlığı: 26.650 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Jumbo Chassis Semi-Trailer Steel welded construction with closely spaced cross members, reinforced design, low-loader outer frame profile, suitable for transporting construction machinery up to 32,000 kg and a maximum external machine width of 2550 mm, fifth wheel plate with interchangeable 2'' kingpins. Rear slant approx. 1200 mm at 7°. Enclosed upper ramp shaft with steel/tread plate. In the low-bed section, omega rail laterally below the outer frame serves as a hanging strip for tarpaulins and distance holders for the lashing mushrooms, not in the wheel area. For the lift table: an additional fixed lightweight outer frame with omega profile allows for the lift table to be raised with closed tarpaulin! 24 t, 2-speed landing gear with single-side operation, half-round base and straight mounting plate, with thrust compensation. Free swing radius to rear: approx. 1950 mm. Rear support foldable 2 wheel chocks with holders Side underrun protection made of aluminium Quarter-shell mudguards at front and rear of each axle Anti-spray flaps behind each axle Rear underrun protection made of steel Full-width spray flap across the rear 4 stainless steel toolboxes, w=800/h=350/d=350 mm, with polished doors, lockable; 2 each on FR-left and FR-right in front of the 1st axle Lift table after gooseneck, approx. 3000 mm long, hydraulically liftable for driving over the gooseneck, with mechanical locking in raised position (cylinder angled for good ground clearance, Fliegl standard). Controls on FR-right + additional operation via wireless remote control (same as ramp operation). Lift table can be raised with tarpaulin closed! Tarpaulin hanging on lift table area on an additional lightweight fixed outer frame with omega profile, lift table can be raised with closed tarpaulin! Lashing mushrooms remain usable even when table is lowered! Lashing points Gooseneck: 4 pairs of 5 t lashing rings recessed into outer frame 2 pairs of lashing mushrooms, both above and on the sides, recessed into outer frame Low-bed: 8 pairs of lashing mushrooms, both top and side, recessed into outer frame, each 10 t 't 9 pairs of 5 t in outer frame Axles & Suspension Dkedoi Riw Aspfx Almol SAF drum brake axles Last axle steered, with automatic reverse lock via reversing light, and additional lock feature on vehicle via hand button Air suspension with lift & lower valve + auto-reset function H & S function with quick venting 1st axle is an automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid is functional up to 30% axle load exceedance and up to a max. speed of 25 km/h) Axle lift is below recommended driving height, therefore no guarantee for tire damage Wheels and Tyres 235 / 75 R 17.5 from leading manufacturers Steel twin wheels, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 tamper-proof coupling heads at front, no connecting line EBS, electronic braking system with EBS socket at front, no connecting cable Note: The trailer may only be towed by trucks that guarantee the effectiveness of the ABS! Axle load detection in the truck via EBS, without truck installation (no calibrated scale) Electrical System 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front, in LED 2 white/red lane marker lights at the rear 1 rotating beacon with holder, switchable via parking light (removable beacon) 2 pairs of warning signs, double LED illuminated and e

Koşul: yeni, makine/araç numarası: 087c7b6bc0c6118a84279fb46, boş ağırlık: 4.100 kg, Further Information Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without raised edges, load area beveled downward by approx. 8° behind the rear axle. Longitudinal beams made from steel profiles. Steel frame hot-dip galvanized, with stainless steel plate at the bending point as rope guide—flush with the floor. For trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm. Towing Coupling Towing coupling ball head D24.8: (height from ground to top approx. 480 mm), towing capacity 2,800 kg, incl. installation and electrical wiring with 7-pin socket. Accessories/Modifications 2 holders for wheel chocks, foldable aluminium side underrun protection – transferred from the truck! Steel underrun protection, quarter-shell mudguards with mudflaps – transferred from the truck! Dodpfsi Riytsx Almskl Storage Boxes Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included). 1 holder for 3 fuel canisters. 1 stainless steel storage box, w=600 / h=400 / d=500 mm, with polished door, lockable, contains control valve and electrohydraulic pump unit. Control box with circumferential door seal and sealing sleeves on rear (splash proof according to technical feasibility). Electrics Adjustment of existing taillights, 2 additional LED work lights recessed into front wall, switched via parking light with switch on outer front wall left side, 1 LED work light at rear, with integrated reversing camera incl. color flat screen monitor, monitor with suction cup mount and 24V power supply, voltage converter 24/12V, 1 7-pin 12V socket = plug adapter. Floor Mega Grip galvanized serrated grating, steel grating 50/4 mm incl., mesh size 50 mm. Top side with anti-slip serration, continuous over the entire main frame platform. Lashing Rings 12 pairs of pivot-mounted lashing rings on the outer frame—each rated 10 tons. One at the very front and one at the very rear. One lashing ring at the very rear in the center for winch cable attachment. 12 lashing points recessed centrally in the floor, each rated 5 tons (not included in rear bevel). Headboard Headboard made from steel sheet, height 1,500 mm. Fixed, with corner posts the height of the front wall. Each with 2 x 12 suspension brackets for lashing chains on left and right sides of the headboard. Winch Electric winch, 24 volt, pull rating approx. 6,350 kg, mounted centrally at headboard (recessed into loading platform), operated by radio remote control, rope length min. 35 m x 9.5 mm, with roller fairlead, with rope pressure plate, incl. overload protection, freewheeling clutch, hand control with approx. 5 m control cable, winch certification, civil engineer test report, inspection book, operating manual. Ramps Length 3,500 mm – 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg/pair (also during ramp loading), electrohydraulically foldable and laterally adjustable – incl. electrohydraulic pump unit. Ramp angle approx. 8° with lowered rear axle. Ramp base made of hot-dip galvanized steel grating (same as loading platform), with anti-slip serration. Ramps can be contracted to approx. 170 mm, hydraulic ramp extension. Ramp prepared for operation at loading docks with full load capacity. Ramp locking with 2 tension straps. Ramp tip offset (nose min. 150 mm) suitable for resting on loading ramps. Ramp operation labeling. Descent brake valve for lowering ramp. Support Height-adjustable support legs at rear, foldable a

Koşul: yeni, makine/araç numarası: f80f2330e1318ef03bc20755e, boş ağırlık: 3.200 kg, azami yük ağırlığı: 35.800 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further information Fine-grained steel welded construction in lightweight design, fifth-wheel plate with replaceable 2" kingpin, only 2 longitudinal members as double-T-beams for subsequent mounting of a headboard rack at the front in the new/current design, outer frame slightly angled with load-lock profile for lashing strap attachment. Note! In order to attach straps in conjunction with drop sides, the sides must be opened! 24 t, 2-speed landing gear with single-sided operation, straight base, without slide compensation, wheel chocks with holders, foldable aluminium side underrun protection, extendable galvanized steel rear underrun protection, half-shell mudguards - loose, not installed!, with anti-spray flaps behind each axle, 1 plastic water tank, capacity approx. 30 l, installed on the left (direction of travel). BPW disc brake axles with 430 mm disc diameter, axles/chassis laser aligned to reduce tyre wear and fuel consumption, air suspension, first axle with automatic lift axle, additionally manually lowerable, operable via push button on the vehicle. 2-line air brake system, with 1 standard central air reservoir, spring-loaded parking brake, 2 interlock-safe coupling heads at the front, without connecting line, EBS (Electronic Braking System) with EBS socket at the front, without connection cable, EBS 2S/2M, test connection for brake cylinder pressure leading outside on the EBS module. Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! With lifting and lowering valve, control unit + brakes integrated in the frame as with tipper semi-trailers, mounted in front of the axles. Dksdpoi Riwqefx Almel Brake lining wear indicator on disc brakes via ABS/EBS lamp on the truck. 385/65 R22.5 Continental make, steel rims, factory silver. 24-volt multi-chamber lights, side-mounted yellow LED lighting as on tipper semi-trailers, 3,000 mm width must be observed, 2 front white position lights in LED, loose, 2 white/red lane marker lights at the rear, 2 x 7-pin interlock-safe sockets at the front, without connecting cable. Germany, approval to EC 2007/46 for complete vehicle, 24/7 service hotline, prepared for double one-line license plate holder: 1 x plastic and 1 x stainless steel interchangeable holder. Warning panel according to ECE-70, aluminium, loose, EBS, safe parking, without contour marking / reflective tape according to ECE R 048. Frame: DB 7350 Nova Grey, Landing legs: black coated. Immediately available!

Koşul: yeni, makine/araç numarası: c78894767223a51dd199030f3, boş ağırlık: 4.600 kg, Further Information Frame Steel welded construction made of high-tensile fine-grained steel, hot-dip galvanized, flat platform without raised edges. The loading area is sloped downward by approx. 8° behind the rear axle. Longitudinal beams made from steel profiles. Steel frame, hot-dip galvanized, with stainless steel (NIRO) sheet at the bend for cable guiding, flush with the floor. Suitable for trucks with wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm. Tow Coupling Tow coupling with 24.8 mm tow ball (height from ground to top approx. 480 mm), towing capacity 2,800 kg. Includes installation and electrics with 7-pin socket. Dkjdpok Unitefx Almel Accessories/Modifications 2 holders for wheel chocks, folding aluminum side underrun protection – transferred from the truck! Steel underrun protection, quarter shell mudguards with mudflaps – also taken from the truck! Toolbox Plastic tool case with drawer and shelf, width 650 mm, height 520 mm, depth 670 mm, lockable with padlock (padlock not included). 1 holder for 3 petrol canisters. 1 stainless steel toolbox, width 600 mm, height 400 mm, depth 500 mm, with polished door, lockable; contains control valve and electrohydraulic pump unit. Control box features all-round door seal and rear sealing grommets (splash water protected according to technical possibilities). Electrics Adaptation of existing rear lights, 2 additional LED work lights integrated into the front wall, switched via parking light with switch on the outside left of the front wall. 1 rear LED work light with integrated reversing camera, including color LCD monitor, screen with suction mount and 24 V power supply, voltage converter 24/12V, 1 seven-pin 12V socket = adapter socket. Floor Mega Grip made of toothed galvanized steel grating, 50/4 steel grating, mesh width 50 mm. Upper surface with non-slip serration, fully installed over main frame platform. Lashing Rings 12 pairs of lashing rings, freely swiveling on the outer frame, each rated for 10 tons. One at the very front, the last at the very rear. 1 lashing ring in the center at the rear for winch cable attachment. 12 lashing points embedded in the center of the floor, each rated for 5 tons (excluding rear slope). Front Wall Front wall made of sheet steel, height 1,500 mm. Fixed, with corner posts matching the front wall height. 2 x 12 mounting brackets for lashing chains, mounted left and right on the front wall. Winch Electric winch, 24 Volt, pulling force approx. 6,350 kg, mounted centrally at front wall (recessed with loading bridge), operated via radio remote control, cable length min. 35 m x 9.5 mm, with roller fairlead, cable pressure plate, incl. overload protection, free-spooling clutch, hand controller with approx. 5 m control lead, winch certification, engineering inspection report, inspection book, operating manual. Loading Ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg/pair (also for ramp loading), electrohydraulically tiltable and laterally shiftable – incl. electrohydraulic pump unit. Approach angle approx. 8° with lowered rear axle. Ramp surface made of hot-dip galvanized steel grating (like the loading bridge floor), with non-slip serration. Ramps can be compressed to approx. 170 mm, ramps extendable hydraulically. Ramps preconfigured for operation on loading docks at full load capacity. Ramp locking with 2 lashing straps. Ramp tips set back (nose min. 150 mm) suitable for docking at loadi

Koşul: iyi (kullanılmış), Kaynak kemeri - Kaynak kemeri: plastiklerin kaynağı için, maske üretim makinesinden - Termik levhalar/Havalandırma memeleri: her biri 2 adet - Ölçüler: fotoğraflara bakınız - Adet: 3 adet kemer mevcut - Fiyat: adet başı - Boyutlar: 240/100/H55 mm - Ağırlık: 0,7 kg/adet Djdpfx Aljxwlxwemjkl

Koşul: iyi (kullanılmış), Yağ dolum istasyonu, taze yağ için pnömatik pompa, uzaktan yağ dağıtım aparatı, yağ verme cihazı, yağ dolum cihazı, yağ transfer pompası, şanzıman yağı pompası, hidrolik yağ pompası, santrifüj şanzıman yağı pompası Dksdpfx Aodl Smnelmjl - Çalışma şekli: manuel - 2x: ayrı depo ve pompalar - Geri dönüş: tanka - Ölçüler: 800/530/Y1100 mm - Ağırlık: 88 kg/adet

Koşul: ikinci el, Üretim yılı: 2018, (Model) için uygundur: U 400_____Burada şunları satıyoruz: Mercedes Benz Unimog U 400 385/65R22.5 için 2 adet 10 delikli jant, kaplamalı, soğuk tabanlı, 160 K, çıtalı profil. Diş derinliği yaklaşık %80-90 Başka sorularınız varsa lütfen bizimle iletişime geçin.Depolama yeri:94491 Hengersberg Dkedpfjyq Ar Njx Almel

Koşul: ikinci el, kilometre: 1.136.810 km, güç: 279 kW (379,33 bg), ilk tescil: 07/2009, yakıt türü: dizel, boş ağırlık: 9.600 kg, azami yük ağırlığı: 8.400 kg, toplam ağırlık: 18.000 kg, lastik boyutu: 315/70R22.5, dingil konfigürasyonu: 4x2, dingil mesafesi: 5.500 mm, bir sonraki muayene (TÜV): 08/2025, frenler: sabit gaz kelebeği, renk: beyaz, şoför kabini: gündüz kabini, vites türü: yarı otomatik, emisyon sınıfı: Euro 5, süspansiyon: çelik-hava, koltuk sayısı: 2, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 800 mm, Donanım: ABS, araç içi bilgisayar, diferansiyel kilidi, düşük ses seviyesi, ek farlar, hidrolik direksiyon, hız sabitleyici, kabin, klima, koltuk ısıtıcı, merkezi kilitleme, park ısıtıcısı, sisal lambaları, tır çekici bağlantısı, çekiş kontrolü, Vehicle location: Bovenden, company premises. 1x comfort seat, 1x sleeper berth, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO (power take-off), differential lock, work lights, storage box, leaf-air suspension, tow bar with ball head, trailer coupling air+electric, aluminium fuel tank, low-noise G1, lashing rails, underride protection, side aluminium guards, swing doors, roof hatch, rear-mounted crane, emergency stop, grab control, foldable, 2-point hydraulic outriggers, radio remote control, 3x hydraulic extensions, green environmental badge. Dkedpfxsv Sq H Te Almsl Wheelbase: 5,500 mm; Superstructure: flatbed truck with space for rear crane, loading height approx. 1,100 mm. Accessories details without guarantee, subject to changes, prior sale, and errors!

Üretim yılı: 2020, Koşul: iyi (kullanılmış), yaklaşık 8 - 10 adet sürekli terazi / konveyör sisteminde kullanım için otomatik terazi, Mettler Toledo - ikinci el - kullanılmış Parça başına fiyat: 2.950.-€ fabrika çıkışlı (net), demonte, paketlenmiş ve yüklenmiş! Üretici: Mettler Toledo Örneğin (daha ayrıntılı bir liste takip edecektir) Djdpeq U Rq Hsfx Almjkl Madde 48 Otomatik denge Üretim yılı: 2020 Tip: C 21 TLW250Corgo Maks. 35.000gramm Min: 100gramm T= - 35.000gr 230V Kemer genişliği: yaklaşık 49cm Eleman genişliği: yaklaşık 55cm Uzunluk: 1.07m Terminal / Ekran: ICS469d-cargo ICS4x9-1 110-240V - 50/60Hz, 300mA Hala pozisyonsuz: Otomatik ölçek Üretim yılı: 2014 Tip: ICS469-100 Maks. 40.000gramm Min: 200gram D= 5gr T= - 40.000gr 230V Hala pos. olmadan (tavanın altında asılı): Otomatik tartı Yapım yılı: 20? Tip: C21 TLW250 Kargo Tip: LCC300 Maks. 300kg Min: 200gram D= 5gr T= - 40.000gr 230V

Koşul: yeni, Schaudt Mikrosa TSE 70 c x 25 TSE 70c - 25/8 mil için GMN SN: 385706, kullanılmamış, açılmış orijinal ambalajında, %100 çalışır durumda, teslimat kapsamı fotoğraflardaki gibidir DİKKAT: Lütfen paketleme ve nakliye masrafları hakkında ayrıca bilgi alın! DİKKAT: Paketleme ve nakliye için ayrı ayrı ücret bilgisi alınız! Dodpenri Euofx Almskl

Koşul: yeni, Sinumerik 840D için SE-17m motor kablosu, orijinal ambalajında kullanılmamış, %100 işlevsel, fotoğraflara göre teslimat kapsamı Dkjdpfx Alei D I Tmemel

Koşul: işlem için hazır (kullanılmış), Mitutoyo 519-326 kollu anahtar / MU-Check için ölçüm probu, seri no. fotoğrafa göre, kullanılmış, normal kullanım izleri, %100 işlevsel, teslimat kapsamı fotoğraflara göre Dodpfx Asi Eb Rbslmskl

Koşul: yeni, Steinmeyer 1414.537/20.50.4460.4900 P3P vidalı mil tahriki Schaudt Mikrosa SN:916336 için toplam uzunluk: 4900 mm, diş uzunluğu: 4460 mm, açılmış orijinal ambalajında kullanılmamış, %100 işlevsel, teslimat kapsamı fotoğraflara göre,DİKKAT: Lütfen paketleme ve nakliye ücretlerini ayrıca talep edin! DİKKAT: Lütfen paketleme ve nakliye ücretlerini ayrıca talep edin! Dksdpfx Aoxah Ndjlmsl

Koşul: işlem için hazır (kullanılmış), Allo DZEL 320/10-S0 Basınç için elektronik transdüser, seri no. fotoğrafa göre, kullanılmış, normal kullanım izleri, %100 işlevsel, teslimat kapsamı fotoğraflara göre Dsdpfsi D Tz Esx Almjkl

Koşul: işlem için hazır (kullanılmış), Philips 4022 226 4230 NC 9418 830 01701 rafı için Philips fan düzeneği, seri no. fotoğrafta görüldüğü gibi, kullanılmış, normal aşınma belirtileri, %100 işlevsel, teslimat kapsamı fotoğrafta görüldüğü gibi Dodpfei Eckmsx Almokl

Koşul: işlem için hazır (kullanılmış), KUKA Bağlayıcılı Rotor 86 61109H31 1FK6081-6AF71-1ZZ9-Z Motor için Fren SN: P46100/T0, kullanılmış, iyi durumda, %100 işlevsel, fotoğraflara göre teslimat kapsamı Dsdpfx Alou Uxabjmjkl

Koşul: yeni, Siemens 7MF4420-1EA00-1AA1-Z Sitrans P diferansiyel basınç verici, kullanılmamış, %100 çalışır durumda Dedpexahiwjfx Almekl

Koşul: işlem için hazır (kullanılmış), elektronik ürün 8402.087.A Maho elektronik el çarkı için bağlantı kartı. 27.68.956 , seri no. fotoğrafta görüldüğü gibi, kullanılmış, normal aşınma belirtileri, %100 işlevsel, teslimat kapsamı fotoğrafta görüldüğü gibi Djdpfx Aoi D Uriolmekl

Koşul: işlem için hazır (kullanılmış), Turck TBEN-L4-8DIP-8DOP Ethernet F/W sürüm 3.2.9.0 için kompakt çok protokollü I/O modülü, kullanılmış, normal aşınma belirtileri, %100 işlevsel, teslimat kapsamı fotoğraflara göre Dksdpfx Aloxaicljmel

Koşul: işlem için hazır (kullanılmış), AXA VSC-3-2600-S-SK50 + Deublin 1116-416-208 döner beslemeli doğrudan tahrikli ana mil motoru, kullanılmış, normal aşınma belirtileri, %100 işlevsel, teslimat kapsamı fotoğraflardaki gibidir DİKKAT: Lütfen paketleme ve nakliye masrafları hakkında ayrıca bilgi alın! DİKKAT: Paketleme ve nakliye için ayrı ayrı ücret bilgisi alınız! Dsdpfx Aek Ru Dgslmekl

Koşul: işlem için hazır (kullanılmış), Agie MJG 4014 D İletkenlik için ölçüm devresi . 619 782.6 ,kullanılmış, iyi durumda, %100 işlevsel, fotoğraflara göre teslimat kapsamı Dkedpfx Alei D Tw Tjmjl

Koşul: işlem için hazır (kullanılmış), Siemens kontrol 820 için komple monitör ünitesi 12", kullanılmış, normal kullanım izleri, %100 işlevsel, fotoğraflara göre teslimat kapsamı. Djdpfji Ebwdjx Almjkl

Koşul: işlem için hazır (kullanılmış), Philips 4022 226 4230 NC 9418 830 01201 rafı için Philips fan düzeneği, seri no. fotoğrafta görüldüğü gibi, kullanılmış, normal aşınma belirtileri, %100 işlevsel, teslimat kapsamı fotoğrafta görüldüğü gibi Dkedpfx Alsi Eckiemol

Koşul: yeni, Steinmeyer 1516.544/10.80.4467.5469 P5 bilyalı vida toplam uzunluk: 5469 mm, diş uzunluğu: 4467 mm Schaudt Mikroso SN:916160 için, kullanılmamış, açılmış orijinal ambalajında, %100 işlevsel, teslimat kapsamı fotoğraflardaki gibidir, DİKKAT: Lütfen ambalaj ve nakliye masrafları hakkında ayrıca bilgi alın! DİKKAT: Paketleme ve nakliye için ayrı ayrı ücret bilgisi alınız! Dksdpfxoxah I Tj Almsl