Kullanılmış Stas 300Zx - 92M3 Biostar Nl Apk 09-2026 satın al (14.846)

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2008, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium parts, continuous rubber strip pressure-bonded to the longitudinal members, maximum stability via integrated tipping shaft with wear-resistant, pressed-in special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit Axles and Suspension, Disc Brakes Jost-disc axle units 3 x 9 tonnes with DCA air suspension, lift and lower valve, load gauge, 3rd axle automatically liftable Tyres and Wheels Lajdpfjxf Spfex Ap Isb 6 wheels with tyres size 385/65 R 22.5 approx. 50-60% tread on silver steel rims, 11.75x22.5 ET 120 Landing Legs Mechanical support legs, load capacity 2 x 20 t, swing feet used for air suspension Brake System According to E.C. standard, two-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E system 2S/2M, with RSS (Roll Stability Support), ALU air tank Electrical System According to StVZO regulations, with two 5-chamber Aspöck LED tail lights, 24 Volt system with two 7-pin and one 15-pin socket at the front, EBS socket, with LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Dump Bed ALU dump body, side walls with welded vertical aluminium profiles, floor approx. 6 mm in highly wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall angled design in 4 mm ALU with reinforcing profiles for hydraulic cylinder mounting, side walls in 3 mm hard alloy, straight rear wall, automatic pneumatic (lockable) universal tailgate with pendulum and 2/3-1/3 barn door configuration, double hinge, made from 4 mm thick aluminium, 1 grain chute with water protection, wear plates fitted on side approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Hydraulic cylinder mounted at the front wall, operating pressure 150 bar, brand Edbro, with approx. 2 m hydraulic hose and 1" quick-release coupling Accessories 6 Parlok plastic mudguards with 2 Stas splash guards, 3 m aluminium ladder, reinforced and foldable underrun protection with 2 towing eyes, one foldable side underrun guard, catwalk on front wall with access ladder (left side), 3 swivelling ALU bows, 1 central additional bow holder, rolling tarp with aluminium tube in centre, rolling tarp system, approx. 660g/m² quality, tarp fastener with quick-action lock (no lashing straps), wheel brace, 2 chocks, toolbox type 800, continuous splash flap on underrun guard, etc. Offer and images are subject to prior sale/change.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2021, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.200 mm, yükleme alanı hacmi: 53 m³, Chassis, Lightweight Version Made of aluminum (15-6-12) Two fully-automated, welded I-beams longitudinally, with welded cross members. Chassis width: 1,600 mm Axles and Suspension: 430 mm disc brakes, 'Off-Road Version', SAF Intradisc Light axle units, 3 x 9 t with SAF air suspension, centrally aligned with the chassis longitudinal member, 1st axle liftable via air bags with starting aid and manual forced lowering, SmartBoard info center, Hebert lowering valve, front load pressure gauge Lodoyiw T Espfx Ap Ioab Wheels and Tires on Aluminum Rims 6 wheels with 385/65 R 22.5 tires, approx. 50% tread, wheels 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims Kingpin 2” screw-in on an 8 mm thick 'light' mounting plate Landing Legs Support winches, each with 20 t capacity, swing foot for air suspension Brake System According to EC standards, dual-line Wabco system, spring-loaded parking brake acting on two axles, and Wabco EBS-E incl. RSS (Roll Stability System), Wabco SmartBoard Info Center, aluminum air tank system Electrical System According to German Road Traffic Licensing Regulations (StVZO), with 3 round triple-chamber Aspöck tail lights, 24-volt system with 2x7-pin and 1x5-pin sockets, 2x7 side marker lights, 2 centrally mounted LED reversing lights, 1 round fog lamp, 4 LED work lights, 1 interior LED light, 4 red LED position lights in rear door frame All air and electrical lines are properly laid in plastic conduits! Tipper Body / Tipping Body, "Smooth Construction" Body internally fully welded, aluminum tipping body, 30 mm thick plank profiles (2-3 mm), 600 mm wide welded side panels, 8 mm thick highly wear-resistant floor alloy (5383H34/HB 110) with 90° profile to side wall, 4 mm reinforced, straight front wall, universal straight rear door with two half-and-half swing doors and a grain chute, universal door automatic pneumatic operation with separate lockable lever, swingable ALU rear hoop, two hold-downs with rubber buffers on the tipper body fixed to the front wall frame. Hydraulic System—Tipping Cylinder with "Cladding" Mounting Hydraulic cylinder mounted on front wall with working pressure of 150 bar, Edbro brand, with approx. 2.5 m hydraulic hose and loose end 1”, tipping angle appx. 48° Accessories 6 Parlok mudguards, full-width splash guard mounted on underrun protection, no spare wheel holder, foldable aluminum side underrun protection (right), large Type 860 toolbox, approx. 3 m aluminum ladder, 3 central aluminum swing hoops, approx. 150 mm raised, additional mid mount, roll tarp with central skylight and extra reinforcement in wear areas, quality approx. 660 g/m², roll tarp system with quick-tension closure, all-round rubber rope at rear with two tension hooks to fasten on rear swing hoop, walkway on the frame, rear tarp edge has welded-in rubber cord for water protection, robust foldable underrun guard, 2 "Clear-Pass" spray flaps on the mudguard (EU standard), ALU grain funnel with dust sack fixed to the side of the frame, holders for shovel, broom, and scraper above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, yükleme alanı uzunluğu: 10.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 50 m³, Chassis light version Laodpfx Aoxf Sn Iop Isb Aluminium (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brakes 430 mm "Off Road Version" SAF Intradisc axle units 3 x 9 t with SAF air suspension, central air bag arrangement next to the chassis longitudinal beams, 1st axle liftable with drive-off aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with trailing steering, electrically lockable, Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres, approx. 40-50 % tread remaining, with Alcoa aluminium rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminium rims Landing Gear Mechanical version with single-side operation, 2 speeds, with swing foot for air suspension, 2x20t static load capacity Braking System According to E.C. standards, twin-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E including RSS (Roll-Stability-System), Wabco Smartboard info center, aluminium air reservoir system Electrical System According to StVZO regulations, with 2 five-chamber lamps type Aspöck Ecopoint 2, 24-volt system with 2x7- and 1x15-pin sockets, with lateral outline marker lights, 2 separate LED reversing lights at the rear. All air and electrical lines neatly installed in plastic tubing. Tipping Body/Bin Body, fully welded interior Aluminium bin, side walls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded, floor 8 mm thick high wear-resistant alloy (5383H34/HB 110), bulkhead 4 mm reinforced in straight version, rear wall as double swing doors in straight version with 2 half/half doors each with a grain chute, pneumatic floor vibrators underneath, rear hanger made of aluminium, swing-out, two hold-downs with rubber buffers on the tipper bin attached to the frame at the bulkhead, Hydraulic System Tipping cylinder with "cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted to the bulkhead, working pressure 220 bar, make Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48° Accessories 6 Parlok mudguards, full-width spray flaps fitted to underrun protection, aluminium spare wheel holder, foldable lateral underrun protection right-hand side, large 860-type toolbox, approx. 3 m aluminium ladder, 3 mid-position, approx. 150 mm raised swing bars, rolling tarp with central light strip and separate reinforcements at wear points, approx. 660 g/m² quality, with rolling tarpaulin system, perimeter rubber cord in rear end of tarp with two tension hooks to fix onto the rear swing bar, catwalk on bin with access on left, side tarp lock with tensioning straps, rear tarp closure with welded-in rubber cord for water resistance, robust foldable aluminium underrun guard with two towing eyes left and right including locking pins, 2 "Clear-Pass" spray flaps on the mudguard to EC standard, etc. Offer and images non-binding.

Koşul: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, Özellikle küçük işletmeler ve jant kaplama firmaları için tasarlanmıştır. Ledpsg Ngt Njfx Ap Ijab Tesis komple set olarak şunlardan oluşmaktadır: Toz boya fırını: Genişlik x Yükseklik x Derinlik 1200 x 1600 x 1200 mm, 15 KW Toz boya kabini: Genişlik x Yükseklik x Derinlik 2000 x 2240 x 920 mm ROMER ProfiSpray serisinin en yeni toz tabancası Hepsi birlikte 16.990,00 € + KDV, nakliye ve montaj hariçtir.

Koşul: yeni, azami yük ağırlığı: 28.240 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.820 mm, yükleme alanı hacmi: 91 m³, Donanım: ABS, Stock no. 5559 New vehicle in stock – available immediately! Purchase, rental, or rent with a purchase option upon request! Side tarpaulin retrofit available for an additional charge! Stas 91 m² moving floor / 10 mm flat floor / TÜV load certificate ---- * Manufacturer: Stas * Model: BIOSTAR – Walking Floor trailer * First registration: – (New vehicle) * Color: Galvanized chassis, body in RAL 7016 silver grey, tarpaulin SIO 7340 * Volume: approx. 91m³ (13.50m long x 2.475m wide x 2.64m to 2.82m high) * Gross weight: 36,000 kg * Unladen weight (according to registration): 7,760 kg * Payload: 28,240 kg * Axles: 3x SAF axles / 1st axle liftable / starting aid / disc brakes * Tires: 385/65 R22.5 new on Speedline Diamond aluminium rims * Wheelbase: 7.85 m * Suspension: ECAS air suspension with raise and lower function * ABS / EBS * Cargo Floor CF 500 SL-C with remote control and control box rear left * 21 flat floor boards, 10 mm * 12 pairs of retractable lashing rings in the floor * Welded aluminium end caps * Complete emptying partition with brushes and stainless steel handles * Service door in front wall * Swing doors (50/50) with pneumatic locking * 2x locking bars * Swivelling rear cross member at door closure * Hydraulic connections at the front with 3 m hoses and * Connection possibility beneath the body without hoses * Operator platform with ladder front left * Fifth wheel height: 1,150 mm * Single mudguards * Full load landing legs * Rear aluminium underride guard (one piece, foldable) * Rolling tarpaulin (900g/m²) with tensioning straps * Steel roof bows, foldable and longitudinal lashing straps * 1x tool box rear left * 1x aluminium ladder, 3.80 m long * Load pressure gauge * Smartboard * TPMS tire pressure monitoring system * Aluminium rear buffer * 1x extendable ladder at the rear right * 2x LED work lights in front of axles * 2x LED reversing lights at the rear * 1x LED work light inside front wall Lsdpfx Apov Emk Ue Isab * 2 x 3 function lights in upper rear door cross beam New vehicle in stock – available immediately! Purchase, rental, or rent with purchase option upon request! Note regarding possible errors in the ad: Despite careful preparation, occasional errors in text or specifications cannot be ruled out. We accept no liability for mistakes, changes, or prior sale. All information provided without guarantee. Please contact us to verify details or for further questions.

Koşul: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 40 m³, Donanım: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle with lift, starting aid and electric actuation, raise/lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires mounted on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gear with single-sided operation, brake system according to E.E.C. standard, dual-line Westinghouse system, spring brakes acting on two axles, EBS electronic braking system from Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system per Road Traffic Licensing Regulations (StVZO) with two Aspöck five-chamber lights, 24-volt system, aluminum tipper body, hydraulics by Edbro incl. approx. 2 m hydraulic hose, 6 PVC mudguards with rubber splash flaps, side underrun protection, rear underrun protection, catwalk on the frame, fully welded, LL rubber gasket, spindle locks on the rear door, prepared for vibrating plate installation, mud-proofed! Lajdpfxsu Dvw Es Ap Isb ADDITIONAL EQUIPMENT AVAILABLE ON REQUEST COLOR FREELY CHOICEABLE +590¤ delivery charge *Pictures and offers are subject to change*

Koşul: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 56 m³, Donanım: ABS, Chassis light version In aluminium (15-6-12) Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and Suspension 430 mm disc brakes Jost (formerly Mercedes DCA) axle assemblies, 3 x 9 t with air suspension, centrally mounted air bellows aligned to the longitudinal beams, first axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, raise-lower valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R22.5 from leading manufacturers (manufacturer's choice), steel rims 11.75 x 22.5 ET 120 Landing Legs Mechanical design, single-sided operation, 2-speed, pivoting foot for air suspension Brake System According to E.G. standards, dual-line Wabco system, spring-loaded parking brakes acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System) and Premium Modulator, Wabco Smartboard Infocenter, aluminium air tank system Electrical System According to StVZO guidelines with 2 Aspöck Ecopoint 2 five-chamber lights, 24 Volt system with 2x 7-pin and 1x 5-pin socket, with side marker lights, 2 separate LED reversing lamps at rear, 1 LED headlight inside Tipping Body/Body Full Interior Welding Aluminium tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide fully welded, floor 8 mm high-wear alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as universal door in straight design with 2-leaf doors (2/3-1/3 split) and one grain chute (alternatively 1/2-1/2 split, each with a grain chute), aluminium round profile welded to seal the door gap on sides and bottom of rear doors, rear doors partially smooth-panelled in aluminium, universal door operation automatic pneumatic with separate lockable lever, rear canopy in ALU, pivotable, two hold-downs with rubber stops attached to tipping body frame at front wall Lasdpfxjfi Nmus Ap Isb Hydraulic System Tipping Cylinder with Large Casing Hydraulic cylinder front-mounted, max. working pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flaps across entire vehicle width attached to underrun protection, ALU spare wheel holder, right side underrun protection foldable, large toolbox Type 860, approx. 3 m aluminium ladder, 3 centre-pivot ALU hoops raised by approx. 150 mm, additional central hoop mount to hold up to 2 hoops for larger loading width, roll tarp with central light strip and separate reinforcement at wear areas, approx. 660 g/m² quality with roll tarp system, circumferential rubber cord at rear tarp edge with two hooks at rear pivot hoop, catwalk on frame in chassis colour, tarp closure with quick-release fastener, rear tarp end welded-in rubber seal against water ingress, robust foldable underrun guard with two optional towing eyes left & right incl. safety pins, 2 'Clear-Pass' spray flaps at mudguards (EG standard), ALU grain funnel with plan sack mounted on frame side, holders for shovel, broom and scraper mounted above axles, etc. + €590 delivery charge Available in 50m³ – 56m³ Load compartment length: 9,700 mm and 10,500 mm * Price varies depending on equipment

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.880 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 47 m³, Donanım: ABS, Tipping semi-trailer with ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3x9 t axles with air suspension, 1st axle lift with starting aid and electric activation, raising and lowering valve for air suspension, Wabco SmartBoard, brake wear indicator, 6 wheels with 385/65 R22.5 size tires mounted on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gears with single-sided operation, braking system compliant with EEC standards, dual-circuit system, spring actuators operating on two axles, and Wabco EBS electronic system with RSS (Roll Stability Support), aluminum air tank, electrical system in accordance with StVZO with 2 Aspöck five-chamber tail lights, 24 volt system, aluminum tipping body, Edbro hydraulic system with about 2 m hydraulic hose, 6 PVC mudguards with rubber splash guards, lateral underrun and side impact protection, catwalk on the chassis, fully welded, long-life rubber seals, spindle locks on the rear door, body optionally also available mud-tight! Combination tail door split 2/3–1/3 with grain slider and automatic pneumatic locking. ADDITIONAL EQUIPMENT AVAILABLE ON REQUEST COLOR OPTION FREELY SELECTABLE +590€ transfer costs Ljdpfx Aeu Dvw Sop Isab Also available in models Z9–Z13 *Pictures and offers are non-binding*

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg). Landing gears Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet. Ledpfxjgcw Rio Ap Ijab Brake system According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator. Electrical system According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside. Body/tipper body — "Body fully welded inside" Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead. Hydraulic system "Cargo Floor" 24 board system — smooth version! Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1

Koşul: yeni, azami yük ağırlığı: 28.840 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.660 mm, yükleme alanı genişliği: 2.250 mm, yükleme alanı yüksekliği: 2.350 mm, yükleme alanı hacmi: 50 m³, Donanım: ABS, Example: STRONG & LIGHT, now also available for heavy-duty applications, starting from 40 m³ loading volume and 6,600 kg. STRONG & LIGHT, now also available for heavy-duty applications, from 40m³ loading volume and 6,600kg Lajdpfxehfiqcj Ap Ieb ----Example: High-quality aluminium chassis with high-strength steel body, ACTUAL WEIGHT 7,160 KG, Chassis with 3x9t DCA axles, equipped with 430mm disc brakes, 6x steel rims, 1st axle as lift axle with starting aid, aluminium drop-leg supports (can be uncoupled when loaded), foldable underrun protection, digital load pressure gauge (indicates axle load), toolbox, access ladder, Body made from HB450 steel plates, floor thickness 5mm, side walls and rear doors made from 4mm HB450 steel sheets, swing doors (split 1/2 - 1/2) with grain chute on the right, remote unlock for rear doors, doors sealed with round steel (alternative rubber seal available – mud-tight), rolling tarpaulin with central pipe, aluminium fender to protect the roof tarpaulin during loading, platform mounted on the frame, EdBro tipping cylinder with long sleeve, loading height = 3,650mm. (Some vehicles shown include special equipment options) ----For further equipment details and a detailed vehicle offer, please contact us. Various loading volumes, vehicle lengths and heights available. Paintwork and equipment specifications as per customer's requirements +500¤ delivery costs All offers and images subject to change.

Koşul: yeni, azami yük ağırlığı: 29.560 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.600 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 60 m³, Donanım: ABS, Stock no. 5640 Laodexl Ntuspfx Ap Ieb For sale, rent, or rent with a purchase option upon agreement! Approx. 60 m³ STAS agricultural walking floor trailer with integrated grain funnel / service door etc. ---- * Manufacturer: STAS * Model: FARMSTAR – Agricultural Walking Floor Trailer * First Registration: – (New vehicle) * Colors: Chassis RAL 9005, Body RAL 7001, Tarpaulin SIO 7500 * Volume: approx. 60 m³ (10.60 m length x 2.48 m width x 2.30 m height) * Axles: 3x SAF axles / 1st axle lift axle + traction assistance / disc brakes * Tires: 385/65 R22.5 with Speedline Diamond aluminum rims * Wheelbase: 6.25 m * Suspension: Air suspension with raise and lower function * Gross weight: 36,000 kg * Unladen weight (manufacturer’s specification): 6,440 kg * Payload: 29,560 kg * ABS / EBS * CARGO FLOOR CF 500 SL-C with wireless remote control and operator console at rear left * 21-board floor system, 6 mm ribbed * Welded aluminum end caps * Rear end plate made of aluminum * Integrated grain hopper * Additional guides beneath the floor profiles * Emptying partition with brushes and stainless steel handles * Front wall made from aluminum plank profiles * Service door in the front wall * Side walls smooth inside and out (grain version), fully welded * Inspection window in the rear left side wall * Swing doors (50/50) * 4x locking rods * Swiveling rear door crossbeam * Hydraulic connections front with 3 m hoses and * Connection possibility beneath the body without hoses * Pressure 1" female * Return 1" female * Operating platform with access ladders front left and right * Coupling height 1,150 mm * Single mudguards * Heavy-duty landing legs * Rolling tarpaulin (900g/m²) with quick-lock system * Folding aluminum roof bows * Folding rear aluminum lighting bracket * Aluminum air tank * 1x toolbox front left * 1x toolbox rear right * Shovel and broom holder left side * 1x aluminum double-sided access ladder (2x 8 steps) fixed on right * 1x extendable ladder at rear right * Smartboard * TPMS tire pressure monitoring system * LED 5-chamber taillights * 2x LED working lights in front of the axles * 2x LED reversing lights at rear * 1x internal LED working light at front wall * 2 x 3-function lamps, mounted at top in the rear door crossbeam For sale, rent, or rent with a purchase option upon agreement! Notice regarding possible errors in the listing: Despite careful preparation, errors may occasionally occur in the text or details. We accept no liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or to clarify any further questions.

Koşul: ikinci el, toplam ağırlık: 39.000 kg, ilk tescil: 01/2013, bir sonraki muayene (TÜV): 07/2025, Donanım: ABS, 59 cubic meter tipper Full aluminium body Unladen weight: 7,570 kg SAF axles with disc brakes Tyres: 60% Good condition Lsdevwhvpspfx Ap Ieab Belgian registration Price: €23,900 net

Koşul: incelemesiz (kullanılmış), Üretim yılı: 1977, Fonksiyonellik: kontrol edilmemiş, makine/araç numarası: 100377, masa uzunluğu: 860 mm, masa genişliği: 600 mm, toplam ağırlık: 5.000 kg, maksimum strok hızı: 300 dev/dak, No minimum price – guaranteed sale to the highest bidder! Bids require timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Stroke rate: 60 – 300/min Table dimensions: 830 mm x 600 mm Decoiler Model: KEMMERICH V 500 AE Diameter: 1,500 mm MACHINE DETAILS Lasdpoy D R Rzsfx Ap Ijb Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,500 x 2,400 mm Machine weight: 5,000 kg EQUIPMENT Press force measuring device (Model: GERLACH PKV 100) External reference: 66

Koşul: yeni, Üretim yılı: 2026, çalışma genişliği: 510 mm, alan performansı: 2.300 m²/saat, toplam ağırlık: 230 kg, garanti süresi: 12 aylar, su tankı kapasitesi: 42 l, Technical Data: CONDITION - NEW! Year of manufacture: 2026! Manufacturer: Hako Model: Scrubmaster B45 CL TB510 Type: Compact scrubber-dryer Country of origin: Germany Wheel drive: Yes Charger: Built-in Power supply: Battery Battery type: Sonnenschein GF12105 V (12V 105 Ah) Water tank type: AntiBac Number of included brushes (pcs): 1 Brush width (mm): 510 Squeegee width (mm): 860 Water tank: Clean / Dirty (l): 42 / 42 Theoretical area coverage (m²/h): 2300 Operational weight (kg): 230 Scope of delivery and features: ANTIBAC WATER TANK INTEGRATED SPRAY GUN FOR APPLYING CHEMICALS 510 mm medium-hard disc brush, Laedpfx Asy Tl I Tjp Ieb 860 mm squeegee Oil-resistant squeegee blades, 2 x 12V 105Ah Sonnenschein batteries Built-in charger Advantages: The AntiBac tank used in Hako machines is made from material with antibacterial properties. This reduces the growth of bacteria and fungi inside, improves the machine's hygiene, and minimizes unpleasant odors. This solution is particularly advantageous in areas with high hygiene requirements, such as hospitals and food processing plants, and also helps to keep the tank in good condition for a longer time. Additional equipment: The chemical spray gun integrated into Hako scrubber-dryers allows manual application of cleaning or disinfecting agents directly from the machine. The system is connected to the chemical tank and the "Chemical on Demand" dosing system, enabling the operator to apply the product precisely where needed. Main features of this solution: Manual spraying of hard-to-reach areas, Disinfection of vertical surfaces, corners, shelves, and handles, Chemicals are drawn directly from the scrubber system, Controlled chemical dosing, Reduced detergent consumption, Faster spot cleaning without a separate sprayer.

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 2.580 kg, Üretim yılı: 2004, yük kapasitesi: 8.000 kg, Heavy-duty trailer Condition: Ready for operation and fully functional Technical condition: Good Description: Tandem trailer - 2-axle trailer MÜLLER MITTELTAL ETS-TA-B 10.7 - Payload 8,000 kg - Unladen weight 2,580 kg - Perm. total weight 10.7 tons - Galvanized low-loader with heavy-duty (mechanical) loading ramp - Ramp length approx. 2 m - 12V lighting system - Internal loading area length 5.50 m - Internal width 2 m - Total length incl. drawbar 7 m - Loading height 60 cm - Sidewalls approx. 35 cm high - Good tires Lajdpfxsy N H D Is Ap Ieb

Koşul: yeni gibi (sergi parçası), Üretim yılı: 2008, makine/araç numarası: 288457-290911, Fonksiyonellik: tamamen fonksiyonel, Makine tamamen yenidir, hiç kullanılmamıştır Lsdpfx Apovp Smve Ieab

Koşul: yeni, I-profil çelik - düz 80x20 (d1200) mm I-profil çelik - dikey 80x25 (d2100) mm Köşebent demir 50x50x6 (d1000) mm Katı malzeme - çap 40 (d800) mm Kare profil malzeme 60x60x3 (d4000) mm Dikdörtgen profil 80x30x3 (d6000) mm Maks. boru çapı 70x2 (d1600) mm Alın çapı 60 mm Silindir çapı 177 mm Bükme hızı 6,4 m/dak Toplam güç ihtiyacı 4 kW Makine ağırlığı yaklaşık 970 kg Makine ölçüleri 1400x950x1450 mm Donanım: - Çelik konstrüksiyondan makine gövdesi (ST-52) - Hidrolik motor ve dişli ile tahrik - Miller özel çelikten (42CrMo4), sertleştirilmiş ve taşlanmış - Standart silindir seti - Alt silindirler hidrolik olarak yukarı/aşağı ayarlanabilir - Alt silindirler için dijital gösterge - Ayrı kumanda paneli - Yan doğrultma makaraları tek yönde manuel ayarlanabilir Ledpfjyv Nwqox Ap Ieab - Manuel yağlama - Yatay ve dikey çalışma imkanı - Kullanma kılavuzu

Koşul: yeni, I-profili - dik 100 x 20 (d 2100) mm Boru çapı maks. 100 x 3 (d 3000) mm Köşe profili 80 x 80 x 8 (d 2000) mm Kare malzeme 50 x 25 x 2 (d 600) mm Solid malzeme - çap 60,0 (d 1000) mm I-profili - yatay 120 x 30 (d 600) maks. 140 mm Takım tutucu 80,0 Devir hızı 4,2 dev/dak Ağırlık 1600 kg Boyutlar 1240 x 1375 x 1540 mm Donanım: - Kaynaklı çelik konstrüksiyon gövde (St-52) Lasdpfx Aoyv Nniep Isb - Valslar 3 ayrı hidrolik motor tarafından tahrik edilmektedir - Özel çelik dişliler - Miller özel çelikten üretilmiş, sertleştirilmiş ve taşlanmıştır - Manuel yağlama - Kılavuz valslar hidrolik olarak ayarlanabilir - Alt valslar hidrolik olarak yukarı-aşağı hareket edebilir - Ayrı ve taşınabilir kumanda paneli - Yatay ve dikey çalışma imkanı - Üretim kalitesi CE, ISO 9001 - 2015, TSEK ve TURQUM sertifikalıdır

Koşul: yeni, Yuvarlak malzeme 40 mm Boru çapı 70x2 mm Dikdörtgen malzeme 80x30x3 mm Köşe çelik 50 x 5 mm I-profil – dikine 50 x 15 mm Laedpfxjyv Nk Ro Ap Iob Varlık çapı 157 mm I-profil – yatay 80 x 16 mm Mil çapı 50 mm Bükme hızı 2,95 m/dak Toplam güç ihtiyacı 1,1 kW Makine ağırlığı yaklaşık 500 kg Yer ihtiyacı yaklaşık 1000x950x1450 mm Donanım: - 3 tahrikli merdane - Özel çelikten (42CrMo4) yapılmış, sertleştirilmiş ve taşlanmış miller - Bir set standart merdane - Alt silindirler hidrolik olarak yukarı ve aşağı ayarlanabilir - Alt silindirler için dijital gösterge - Ayrı kontrol paneli - Tek yönde manuel ayarlanabilir yan doğrultma makaraları - Manuel yağlama - Yatay ve dikey çalışma

Koşul: ikinci el, kilometre: 317.270 km, güç: 130 kW (176,75 bg), ilk tescil: 06/2019, yakıt türü: dizel, toplam ağırlık: 3.500 kg, bir sonraki muayene (TÜV): 06/2026, vites türü: mekanik, emisyon sınıfı: Euro 6, yükleme alanı uzunluğu: 4.130 mm, yükleme alanı genişliği: 1.760 mm, yükleme alanı yüksekliği: 1.930 mm, Donanım: ABS, elektronik denge programı (ESP), klima, merkezi kilitleme, Volkswagen Crafter kamyonet, yüksek ve uzun panelvan, iç kaplamalı kasa, yan duvar kaplaması 4 mm plastik petek levha, zemin 9 mm kaymaz kontrplak, yük sabitleme halkaları mevcut, ayrıca katlanabilir rampa (fotoğraflara bakınız), sağda sürgülü kapı, Euro6, muayenesi 06/2026 tarihine kadar geçerli, lastikler: yaz lastiği, Avusturya aracı, iyi durumda, boş ağırlık: 2.273 kg, dingil mesafesi: 4.490 mm, şasi no: WV1ZZZSYZK9061742, İletişim: Ivelina Redl (Rusça, Bulgarca, Sırpça, İngilizce, Almanca) TelNo. , Hatalar ve ara satış hakkı saklıdır! Laodpfx Aoy Eki Hjp Isb

Koşul: mükemmel (kullanılmış), Üretim yılı: 2020, CLOOS QIROX Roboticzna Linia Spawalnicza – Podwójny System Bramowy – 2020 Opis ogólny Na sprzedaż: wysokowydajna linia spawalnicza oparta na renomowanym systemie CLOOS QIROX, przeznaczona do zautomatyzowanego spawania średnich i dużych konstrukcji stalowych. System składa się z dwóch spawających robotów bramowych pracujących na wspólnej osi liniowej, połączonych ze stołami obrotowymi, co umożliwia wydajne spawanie długich elementów oraz złożonych zespołów. To nowoczesne (rok produkcji 2020), przemysłowe rozwiązanie odpowiednie do ciężkiej produkcji, spawania konstrukcji stalowych, ram oraz produkcji seryjnej. Wyposażenie i konfiguracja kluczowa Roboty Model: CLOOS QIROX QRC 410 Rok: 2020 Typ: 6-osiowy robot przegubowy Udźwig: 10 kg (na nadgarstku) Powtarzalność: ±0,1 mm Zasięg roboczy: ok. Ø 5000 mm Procesy spawalnicze: MIG/MAG, TIG, opcjonalnie cięcie i integracja czujników ✔ Wysoka dynamika i precyzja ✔ Konstrukcja modułowa do elastycznych zastosowań ✔ Odpowiedni do złożonych ścieżek spawalniczych i długich spoin Sterowniki Model: QIROX Controller QC2.02 / QRC 410 Sterownik bazujący na komputerze przemysłowym PC Jednoczesne sterowanie robotem i osiami zewnętrznymi Zasilanie: 3x 400V / 32A 3x 400V / 19A Częstotliwość: 50/60 Hz Moc: do 21,5 kVA ✔ Solidna obudowa szafy sterowniczej ✔ Optymalny interfejs operatora ✔ Wysoka dokładność prowadzenia ścieżki i stabilność procesu Stoły obrotowe (pozycjonery) Model: CLOOS QR-CTU-100-09 2.0 Maksymalny udźwig: 10 000 N (≈1 000 kg) – w pozycji V 20 000 N (≈2 000 kg) – w pozycji H Lsdpfx Apoyvaahe Isab Moment obrotowy: do 1600 Nm Moment wychylający: 8800 Nm Moc napędu: 4,5 kW ✔ Programowalne osie synchronizowane z robotem ✔ Idealne do spawania skomplikowanych geometrii ✔ Umożliwia optymalne pozycjonowanie i dostępność spawów Układ systemu Podwójny system bramowy (2 roboty na wspólnej osi liniowej) Długi obszar roboczy do dużych konstrukcji Zintegrowane stoły robocze do długich elementów Przeznaczony do: ram konstrukcji stalowych długich zespołów spawanych Typowe zalety tej konfiguracji: Poszerzony zasięg pracy dzięki osi liniowej Możliwość równoległego spawania Wysoka wydajność i skrócony czas cyklu Zalety ✔ Wysoka wydajność i powtarzalność ✔ Doskonała jakość spoin ✔ Elastyczna konfiguracja (różne części i gabaryty) ✔ Niezawodność przemysłowa CLOOS ✔ Do produkcji seryjnej i jednostkowej Typowe zastosowania Konstrukcje stalowe Ramy maszyn Komponenty motoryzacyjne Elementy budowlane Ciężka produkcja Najważniejsze cechy techniczne (podsumowanie) Roboty: 2x QIROX QRC 410 Osie: roboty 6-osiowe + osie zewnętrzne Sterowanie: QIROX QC2.02 Pozycjonery: udźwig do 2 000 kg Zasilanie: 400V / 50–60 Hz Rok: 2020 Typ systemu: bramowa linia spawalnicza Stan techniczny i dostępność Stan: bardzo dobry, w pełni sprawny Możliwość testu pod napięciem Możliwość demontażu i wysyłki na cały świat

Koşul: ikinci el, Üretim yılı: 2003, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 0/200/06/3164, toplam ağırlık: 6.500 kg, toplam uzunluk: 12.600 mm, iş parçası ağırlığı (maks.): 5.500 kg, Softforming kenar bantlama makinesi, çalışır durumda, kullanılmış, üretim yılı 2003. Lodpfjvx Ep Nsx Ap Ioab

Koşul: ikinci el, kilometre: 890.812 km, güç: 235 kW (319,51 bg), ilk tescil: 04/2019, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, bir sonraki muayene (TÜV): 04/2026, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.550 mm, Donanım: ABS, elektronik denge programı (ESP), hidrolik arka platform, klima, navigasyon sistemi, park ısıtıcısı, MAN TGM 18.320 kamyon, açık kasa + brandalı ve hidrolik arka kaldırma platformlu (Scheuwimmer SLSS2509), taşıma kapasitesi: 2.500 kg, yükleme alanı ölçüleri: U: 7,30 m, G: 2,48 m, Y: 2,55 m, yükleme platformu uzunluğu: 2,20 m, buzdolabı, navigasyon, klima, muayenesi 04/2026'ya kadar geçerli, MAN yetkili servisinde full servis geçmişi, lastik durumu: 1. aks yaklaşık %30, 2. aks yaklaşık %40, boş ağırlık: 8.800 kg, dingil mesafesi: 5.425 mm, Avusturya aracı, çok iyi durumda, şasi numarası WMAN28ZZ1KY393756, iletişim: Ivelina Redl (Rusça, Bulgarca, Sırpça, İngilizce, Almanca) Tel.No. , hata ve ara satış hakkı saklıdır! Laedpfx Asyyftiep Iob

Koşul: ikinci el, kilometre: 800.575 km, güç: 235 kW (319,51 bg), ilk tescil: 04/2019, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, bir sonraki muayene (TÜV): 04/2026, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.550 mm, Donanım: ABS, elektronik denge programı (ESP), hidrolik arka platform, klima, navigasyon sistemi, park ısıtıcısı, MAN TGM 18.320 kamyon, açık kasa + brandalı ve Scheuwimmer SLSS2509 kaldırma platformlu, taşıma kapasitesi: 2.500 kg, yükleme alanı ölçüleri: U: 7,30 m, G: 2,48 m, Y: 2,55 m, kaldırma platformu plakası 2,20 m uzunluğunda, buzdolabı, navigasyon, klima, TÜV geçerlilik süresi 04/2026'ya kadar, kamyonda MAN tam servis sözleşmesi vardı, lastik durumu: 1. aks yaklaşık %50, 2. aks yaklaşık %40, boş ağırlık: 8.880 kg, dingil mesafesi: 5.425 mm, Avusturya aracı, çok iyi durumda, Şasi No: WMAN28ZZXKY393903, İletişim: Ivelina Redl (Rusça, Bulgarca, Sırpça, İngilizce, Almanca) Tel No., hata ve ara satış hakkı saklıdır! Lodoyyftcepfx Ap Isab

Koşul: ikinci el, azami yük ağırlığı: 12.900 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2020, bir sonraki muayene (TÜV): 10/2026, Donanım: ABS, Orten PRASQ 18 trailer, beverage body, TÜV valid until 10/2026, aluminum rims, tire condition approx. 50–60% overall, reversing camera, unladen weight: 5,010 kg, Austrian trailer in very, very good condition, chassis no. W0900A218L0004469. Contact: Ivelina Redl (Russian, Bulgarian, Serbian, English, German) Phone: . Subject to errors and prior sale! Laodpfey S Nbzsx Ap Iob