Kullanılmış Fliegl Sds 390 Gardine Standard Ultralight Coil satın al (19.648)

Koşul: ikinci el, Fonksiyonellik: kontrol edilmemiş, makine/araç numarası: WFDFLT21301003569, boş ağırlık: 2.400 kg, azami yük ağırlığı: 11.000 kg, toplam ağırlık: 13.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2014, lastik boyutu: 285/70 r19,5, Üretim yılı: 2014, Further information Bdsdpoi Rizmefx Abzsc Fine-grained steel welded construction, fifth wheel coupling, manufacturer of our choice for twin kingpins with ball bearing turntable ring, maximum steering angle 20°, telescopic support leg, 2 wheel chocks with holders, steel underrun protection, partial mudguards. CLG lower coupler drawbar with certified 50 mm towing eyes for dolly and truck. BPW disc brake axles, air suspension with lift & lower valve. 2-line compressed air brake system, spring-loaded parking brake, Duomatik coupling head at the front with connection lines to the truck, 2 foolproof coupling heads for the semi-trailer. EBS electronic braking system with EBS connector at the front, with connection cable, CAN router, EBS connection cable to the semi-trailer. Note: The trailer may only be towed by vehicles that can guarantee effective ABS function! Axle load detection for trucks via EBS, not installed on the truck. 24 Volt, multi-chamber LED tail lights, yellow LED side marker lights, 2 white front position lights in LED, 2 white/red lane departure LED rear marker lights. 1 x 15-pin connector at front with connection cable to the truck, 1 x 15-pin connector with connection cable to the semi-trailer, cabling prepared for camera system. Country of registration: Germany, with Dekra approval, prepared for single-line license plate holder, contour marking with reflective tape according to ECE R 048, side in white, rear in red. Fifth wheel height approx.: 1150 mm

Koşul: ikinci el, makine/araç numarası: WFDFLT21301006798, boş ağırlık: 2.600 kg, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 13.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2017, lastik boyutu: 285/70 r19,5, Üretim yılı: 2017, Further Information: Fine-grain structural steel welded construction, fifth wheel according to our choice of manufacturer for 2'' kingpins, telescopic landing leg, wheel chocks with holder, steel underrun protection, half-shell mudguards, removable upper sections. Drawbar with certified 50 mm towing eye, undercoupler drawbar. BPW disc brake axles, air suspension with lift & lower valve, mechanical dolly steering system (required in Germany to comply with BO-Kreis regulations). Bjdpfxei Rivte Abzsdc 2-line compressed air braking system, spring-loaded parking brake, Duomatic coupling head at front with connection lines to tractor unit, Duomatic coupling head to semitrailer including connecting spiral, EBS electronic braking system with EBS connector at front and connecting cable, EBS connection cable to semitrailer with CAN router, axle load detection for trucks via EBS (not installed on truck). Attention: The trailer may only be towed by tractor units that ensure proper ABS functionality! 24 Volt, multi-chamber tail lights, side yellow LED lighting, 2 white position lights at front, 2 white/red lane marker lights at rear, 1 x 15-pin plug at front with connection cable to truck, 1 x 15-pin socket with spiral cable to semitrailer, cable for reversing camera system with socket. With Dekra approval, prepared for single-line license plate holder, contour marking with reflective tape according to ECE R 048 (white at sides, red at rear); warning sign according to ECE - 70. Saddle height approx.: 960 mm

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT34202036640, boş ağırlık: 6.213 kg, azami yük ağırlığı: 35.787 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, bir sonraki muayene (TÜV): 05/2026, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.600 mm, yükleme alanı hacmi: 27 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.310 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, lastik durumu: 80 yüzde, renk: sarı, Üretim yılı: 2025, The images are archive photos; the vehicle may still be in use! Fifth Wheel Height approx.: 1200 mm Chassis - Tipper Semi-Trailer Basic lightweight design, fifth wheel plate with replaceable 2" kingpin, patented curved front section. Foldable underrun protection with spring assistance for easier operation. Integrated mudguard bracket with stone-repellent surface. Axles & Suspension SAF disc brake axles with 430 mm disc diameter. Axles/chassis laser measured, reducing tire wear and fuel consumption. Air suspension. First axle is a self-lifting axle with forced lowering and starting aid, activated by pressing the brake three times (starting aid operational with axle overload up to 30% and max. 25 km/h). Braking System Bdsdpfoyylapjx Abzoc 24 Volt EBS electronic braking system with front EBS socket (without connecting cable), external test port for brake cylinder pressure at EBS module, with lift & lower valve. Paver brake, electric control from the truck without truck installation. Automatic tipper lowering with shut-off valve. TPMS (Tire Pressure Monitoring System) according to ECE R 141, display in tractor unit via EBS (truck must be pre-equipped, only monitors standard tires). Axle load detection via EBS CAN-bus signal, display in cab (truck must be pre-equipped, no installation required). Wheels and Tires 385/65 R22.5 steel rims Electrics Side yellow LED lights linked to indicators (flashing side marker lights). Two front white position lights in LED, two rear white/red lane marker lights in LED. Side-mounted LED work lamps on both sides, two additional LED work lights recessed in rear section. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection). Operation hydraulically via truck PTO. Bodies Steel round body with "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mounting. Interior access at the front wall. Greenline – conical and aerodynamic body shape. "Membrane" tailgate – hydraulic rear flap with large upward opening, approx. 2200 mm clearance height. Side walls continuous 5 mm thick; floor continuous 8 mm thick. Insulated body version – Fliegl Asphalt Profi Thermo, front, side, bottom, and rear insulated with Fliegl Isotherm. "Flip Top sliding cover" with automatic rear closure (folding framework). Cover is pre-assembled forward, electrically operated with 7-pin plug at front (charging socket) without connecting cable, no truck installation. Operable on the trailer and via remote control. Operating Notes For transports of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion from aggressive materials. The stated gross weight is technically possible but may not be achievable depending on cargo while observing legal axle, support, and fifth-wheel loads (poor driving and tracking may occur due to incorrect weight distribution). Paintwork Frame – DB 7350 Nova Grey "10 years corrosion warranty" Support legs – Black coated Body – RAL 1007 Narcissus Yellow Tarpaulin – RAL 7038 Agate Grey

Koşul: yeni, Üretim yılı: 2023, Fonksiyonellik: tamamen fonksiyonel, dönme hızı (dk.): 870 dev/dak, hacim debisi: 23.500 m³/saat, giriş akımı türü: trifaze, toplam ağırlık: 23 kg, giriş: 800 mm, presleme: 180 Pa, giriş voltajı: 380 V, güç: 1,1 kW (1,50 bg), bijon dairesi çapı: 800 mm, giriş frekansı: 50 Hz, NEW! Industrial Axial Fan, 800 mm Diameter, 23,500 m³/h, 180 Pa Ziehl-Abegg FC080-SDS.6K.V7 VT0121 5 units in stock Brand: Ziehl-Abegg Model: FC080-SDS.6K.V7 Year of manufacture: 2023 - Air flow rate (m³/h): 23,500 - Maximum air pressure: 170 Pa This Ziehl-Abegg spiral fan is highly versatile in its applications: air extraction, drying, air circulation, air supply. Three-phase motor, 2-stage, 1030 W/400 W, 870/630 rpm 400 V AC (±10 %) Δ/Y, 50 Hz, 1.65/1.05 A, protection class IP54 - Frequency: 50/60 Hz - Power supply: 400 V, 50 Hz, protection class IP54 - Connection type: terminal box - Diameter (impeller/turbine): 800 mm - Protection class: IP54 - Airflow direction: impeller to mounting bracket - Operating temperature range: -25 °C to +55 °C - Speed (rpm): 890/650 - Current (A): 2.7/1.6 - 7-blade impeller made from galvanized sheet steel - Electrical connection via terminal box Bodpoyfv Igefx Abzjdc - Ball bearings - Overload protection via thermostat - Airflow direction: impeller to mounting bracket - Insulation class: F - RoHS compliant: Yes - Installation: on bearings - Dimensions: 850 x 850 x 220 mm - Weight: 23 kg

Koşul: ikinci el, azami yük ağırlığı: 28.560 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2023, bir sonraki muayene (TÜV): 03/2026, yükleme alanı uzunluğu: 12.032 mm, yükleme alanı genişliği: 2.352 mm, yükleme alanı yüksekliği: 2.698 mm, yükleme alanı hacmi: 68 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2023, Donanım: ABS, FLIEGL 3-Axle Fixed Container Chassis with High-Cube 40 FT Container First registration: 2023 Permissible total weight (technical): 38,000 kg Chassis tare weight: 3,640 kg High-Cube container tare weight: 5,800 kg SAF axles with large disc brakes, 430 mm 1st axle is a LIFT AXLE with traction aid Equipped with vehicle driving stability system Axle load detection 6x 385/55 R 22.5 tyres 40 FT high-cube container with the right side wall designed as doors (multi-wing), door dimensions L 2,340 x W 2,585 mm Rear portal doors Internal dimensions (LxWxH): 12,032 x 2,352 x 2,698 mm Volume: 68 cbm Fits 25 Euro pallets Accessible with pallet truck and forklift Condition: A1 RENTING is the new BUYING – also available from us as full-service rental. Bsdpfjvzk Naex Abzsdc

Koşul: yenilenmiş (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT21801013661, boş ağırlık: 3.500 kg, azami yük ağırlığı: 14.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2024, toplam uzunluk: 9.770 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.150 mm, süspansiyon: hava, lastik boyutu: 265/70 R19,5", renk: gri, Üretim yılı: 2024, Please note: The images are archive photos; the vehicle may still be in use! Weights and Dimensions: Gross weight: 18,000 kg Unladen weight (basic version) approx.: 3,500 kg +/- manufacturing tolerances Payload approx.: 14,500 kg Axle load: 9,000 kg Overall length approx.: 9,770 mm Maximum overall width: 2,550 mm Bdodpeyxq H Eofx Abzoc Roller track length approx.: 7,080 mm Loading height approx.: 1,150 mm Drawbar height approx.: 800 mm Drawbar length approx.: 2,500 mm Chassis: Turntable Trailer for Waste Management Fine-grain steel welded construction 2 longitudinal beams with cross members, upper side of the longitudinal beams designed as a container roller track in a wear-resistant version, rear loaded, with run-up bevel. Suitable for roll-off containers with lengths of 6.0 / 6.5 / 7.0 m. Container Locking System: - 2 pairs of locking hooks recessed into the floor - Pneumatically operated The container locking system is a 2-point internal locking mechanism; securing roll-off containers with an internal frame is not possible (for transporting roll-off containers with subframes according to DIN 30722) (Roll-off containers are loaded and unloaded from the rear) Turntable with heavy-duty ball race Wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Half-shell mudguards Plastic toolbox, W=600 / H=425 / D=460 mm, lockable Open storage box for container net Drawbar turntable trailer coupling Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring Axles & Suspension SAF disc brake axles "Axle/chassis laser alignment" for reduced tire wear and fuel consumption Air suspension with lift & lower valve Wheels and Tyres 265/70 R 19.5" as per manufacturer's choice 8 steel rims in twin arrangement, factory silver finish Brake System 2-line compressed air braking system Spring-loaded parking brake Immobilizer: When the container locking system is open, the spring-loaded parking brake is activated Vehicle Stability Control System Duomatic connector at the front, with connecting line to the towing vehicle 24V EBS (Electronic Braking System) with EBS connector at the front, including connection cable Note: The trailer may only be towed by vehicles equipped to ensure the proper function of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red outline marker lights at the rear 1 x 15-pin socket at the front, with connection cable 2 additional LED work lights at the rear, switched via the reverse light Please note: The images are archive photos; the vehicle may still be in use!

Koşul: yenilenmiş (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT44001000966, boş ağırlık: 9.400 kg, azami yük ağırlığı: 30.600 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2010, toplam uzunluk: 12.120 mm, toplam genişlik: 27.500 mm, toplam yükseklik: 900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5", renk: kırmızı, Üretim yılı: 2010, The images are archive photos! Permissible / technical total weight: 24,000 / 40,000 kg Permissible / technical payload approx.: 14,600 / 30,600 kg Permissible / technical axle load: 24,000 / 40,000 kg Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance Overall length approx.: 12,120 mm Maximum overall width: 2,750 mm Gooseneck length approx.: 2,850 mm Low bed platform length in the drive-aisle area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loading height in the low bed, laden, approx.: 900 mm Drawbar height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis – Low-loader trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium 1 plastic toolbox Extendable side extensions to 3,250 mm (not on the rear bevel) (Track width of the construction machinery or vehicles to be transported must not exceed external frame width of 2,750 mm) Storage compartment for timber planks at the center of the loading area 70 mm timber planks for widening to 3,000 mm 2 pairs of stake pockets in the low bed, recessed in the longitudinal beams of the floor Lashing rings low-loader: 2 pairs of lashing rings on the gooseneck, each 5t 1 pair of lashing rings in the rear bevel 4 lashing rings recessed centrally in the floor 2 pairs of keyhole profiles in the drive aisle for inserting longitudinal guide rails and for load securing 6 pairs of lashing mushrooms embedded in the low bed external frame, each 10t 5 pairs of stake pockets embedded in the low bed external frame 4 additional pairs of 10t lashing rings: 1x on the gooseneck 3x recessed in the low bed floor Drawbar and towing equipment: Turntable-type trailer drawbar with certified 50 mm towing eye Axles + Suspension: Drum brake axles Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation front and rear (rocker balancing) Wheels and tyres: 235 / 75 R 17.5" Steel twin wheels, factory silver Brake system: 2-line compressed air braking system Spring-actuated parking brake 2 unmistakable coupling heads at front with connecting lines to towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Note: This trailer may only be towed by vehicles that ensure ABS functionality! Bdodpfeyxq A Hsx Abzsc Floor: Front gooseneck with steel / chequer plate covering then 70 mm softwood flooring, steel / chequer plate in the wheel arch area Rear bevel with 70 mm softwood flooring Loading ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, wood-covered Hydraulically operated via tractor PTO Operational notes: An exemption permit is required for 10,000 kg axle load, only indivisible loads permitted!!! Note! Excessive length and width require a permanent special permit. When applying for an exemption in regulated heavy transport, axle load monitoring is mandatory for air-suspended vehicles!!! This applies to all deviations from § 34 German Road Traffic Licensing Regulations (StVZO) (axle and permissible total weight exceedance) requiring a § 70 exception permit. The specified total weight is technically feasible; however, depending on the cargo, the total weight may not be reached while observing permissible axle/support/king pin loads. (Poor driving and tracking characteristics may occur with improper load distribution) The images are archive photos!

Koşul: ikinci el, azami yük ağırlığı: 28.410 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2012, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 700 mm, FLIEGL yan camlı ve 3 akslı dorse Yararlı yük: 28.410 kg Tip: SDS350 Fren: Disk fren Aks: BPW Bjdpfswgghnjx Abzjdc + Havalı süspansiyon 2x destek ayağı (JOST) Uzunluk: 13,60 m Genişlik: 2,40 m Yükseklik: 0,70 m Finansman/kiralama alanında da partnerlerimizle size memnuniyetle destek oluruz. Tüm bilgiler garanti edilmez. Hata ve ara satış hakkı saklıdır.

Koşul: ikinci el, ilk tescil: 09/2016, renk: diğer, Üretim yılı: 2016, Donanım: ABS, = Diğer seçenekler ve donanımlar = - BPW dingilleri - Kaldırılabilir dingil - Davlumbaz frenler = Notlar = Fliegl, 2016, BPW dingilleri, Birinci dingil kaldırılabilir, davlumbaz frenler = Firma bilgileri = Banka bilgileri: Rabobank Hesap No: 39.33.10.655 IBAN: NL73RABO0393310655 SWIFT kodu: RABONL2U Bdedpfxoy Avafo Abzoc - İşlemden önce banka bilgilerimizi mutlaka kontrol edin! - Araç rezervasyonu depozito olmadan mümkün değildir. - Tüm ilan edilen araçlarda yazım ve metin hataları yapma hakkımız saklıdır.

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2007, yükleme alanı uzunluğu: 7.280 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 2.900 mm, süspansiyon: hava, dingil mesafesi: 1.810 mm, renk: diğer, Üretim yılı: 2007, = Additional Options and Accessories = - Rear doors = Notes = Tail lift: Dhollandia DHSM, underrun protection flap, 00 kg WFDFLT218700571 7.28 x 2.49 x 2.90 = Further Information = Axle brand: BPW Suspension: air suspension Axle 1: Tyre tread left: 55%; Tyre tread right: 55% Axle 2: Tyre tread left: 55%; Tyre tread right: 55% Body builder: TRS Iceland Technical condition: very good Visual condition: very good Registration number: WX-TZ-33 = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a reply within 8 hours. Prices are excluding VAT. No rights can be derived from the given information. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (available on WhatsApp and Viber). MOB: Dutch (available on WhatsApp and Viber). When making payment via bank transfer, funds need to be transferred to our bank account below. Always check the payment details stated on our website. If you have received different information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U Bjdpfx Ajymqd Sebzjdc

Koşul: mükemmel (kullanılmış), resimlere bakın; daha kapsamlı bağlama cihazları mevcuttur! Bdodpfxjha U U Ro Abzec Eğer ilgileniyorsanız lütfen bizimle iletişime geçin!

Koşul: iyi (kullanılmış), Hidrolik silindir, destek silindiri, hidrolik piston, baskı pistonu - Piston kolu: Ø 50 mm - Boru: Dış Ø 145 mm Bdedpfx Abofrzrpozsc - Stroke: 385 mm - Toplam uzunluk: kapalı 683 mm - Bağlantı: Delik Ø 40 mm - Hidrolik pres imalatı için ideal - Adet: 9 parça - Fiyat: adet başı - Ölçüler: 683/145/H270 mm - Ağırlık: 41 kg/adet

Koşul: yeni, makine/araç numarası: 8b1f4087611d72661dc0b3869, boş ağırlık: 4.750 kg, azami yük ağırlığı: 30.250 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.000 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22.5, Further Information Chassis, Semi-Tipper Fine-grained steel welded structure, lightweight basic design, kingpin plate with replaceable 2" kingpin Curved front wall, patented 24 t, 2-speed landing gear, single-sided operation, with straight base, without compensating support Foldable underrun protection Half-shell mudguards Tow hook at rear Bdedji Ri Nfjpfx Abzsc Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Axles in off-road version, Air suspension 1st axle automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against corrosion Brake System 2-line compressed air brake system, color-coded line routing for easy servicing. Spring-actuated parking brake 2 front fool-proof coupling heads, without connecting line EBS, electronic braking system with EBS socket at front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With raise & lower valve Vehicle - driving stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via truck display, via EBS, without truck installation (prerequisites must be met in the truck; only for standard tire fitment). Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked with the indicator "Flashing side marker lights" 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin fool-proof sockets at front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw sleeve, fixed part, NW 48 mm (without hose connection) Operated hydraulically via the truck's PTO Tipping Body Steel round trough in Stone Master Design, made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic unit including ladder at the front wall. Greenline – conical and aerodynamic trough shape Shovel and broom holder on front wall exterior. Membrane tailgate Tailgate as swing door with double-joint hinge, externally mounted with two-point hook locking. 2 clamping screws with lever locks at the lower sides. Side walls continuous 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized construction, Standing platform with access ladder, connection plate for air/electric and brakes with generous space for optimal operability. Tarpaulin rolls to the right side for depositing, with central locking on the left. Country of Approval / Plates Germany With Dekra inspection and certificate (according to §13 EG – FGV) Body strength according to EN 12642 24/7 Service Hotline Prepared for single-line number plate holder Contour marking with reflective strips according to ECE R 048, side white and rear red Painting Frame DB 7350 Nova grey 10-year warranty against corrosion Landing legs black coated Trough RAL color as desired, single color Tarpaulin RAL color as desired, single color Available in thermally insulated version!

Koşul: yeni, makine/araç numarası: 113bec9dd54d24fa34a088424, boş ağırlık: 4.400 kg, azami yük ağırlığı: 28.600 kg, toplam ağırlık: 33.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı yüksekliği: 1.750 mm, yükleme alanı hacmi: 30 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.400 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, Further information Chassis for semi-trailer tipper Fine-grain steel welded structure in lightweight design, fifth wheel plate with exchangeable 2" kingpin Patented curved front wall 24-ton, 2-speed landing gear, single-sided operation, with straight lower section, without load compensation 2 wheel chocks with holders Folding underrun protection Half-shell mudguards Tarp pole with holder 2 rear towing hooks Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment reduces tire wear and fuel consumption Axles in off-road version Air suspension 1st axle is a self-lifting axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded line routing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting hose EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With raise & lower valve Vehicle driving stability system Wheels and tires 385/65 R22.5, manufacturer at their discretion Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the tractor unit's display, via EBS, not installed on truck (functionality must be supported by the truck. Only for standard tires). Electrics 24 Volt, multi-chamber lamps, side yellow LED lighting Side yellow LED lighting linked to indicators "flashing side markers" 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, static part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body Aluminium box body, made of high-quality, wear-resistant material. Front wall 5 mm thick, externally mounted side walls made from 30 mm hollow-chamber profiles, precisely welded, with aggregate-resistant upper belt section. Internal access ladder at front wall (not compatible with Cramaro). Shovel and broom holder outside on front wall. Greenline – conical and aerodynamic body design Membrane tailgate Tailgate as swinging flap with double jointed hinge, externally mounted with 2-way hook locking. Tailgate with rubber seal. Note! Heat resistant up to max. 170°C! Floor fully 6 mm thick Standing platform with access ladder, connector plate for air/electrics and brake with large open space for optimal operability. Roll tarp foldable on passenger side (FR-right), with central locking on driver's side (FR-left) Country of registration / Plates Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Conspicuity markings with reflective tape according to ECE R 048, white at the sides and red at the rear Bdedpei Rizijfx Abzsc Paintwork Frame: DB 7350 Novagrau "10-year warranty against rust-through" Body: RAL to customer preference, single color Roll tarp: RAL 7035 light grey

Koşul: yeni, makine/araç numarası: 4499ca1b286f9f653066b5693, boş ağırlık: 4.900 kg, azami yük ağırlığı: 30.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı yüksekliği: 1.600 mm, yükleme alanı hacmi: 27 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.150 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22.5, Further Information Chassis Tipper Semi-Trailer Fine-grained steel welded construction in basic lightweight design, kingpin plate with replaceable 2'' kingpin Patented curved front wall 24 t, 2-speed support legs, single-side operation, with straight base, without compensation Folding underrun protection Half-shell mudguards Towing hook at the rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment for reduced tire wear and fuel consumption Axles in off-road specification Air suspension 1st axle with automatic lift axle, including forced lowering and start assist Hot-dip galvanized lift axle mechanism with 10-year warranty against corrosion Braking system 2-line compressed air brake system, color-coded air lines for easy service Spring-loaded parking brake 2 mistake-proof coupling heads at the front, without connecting hose EBS (Electronic Braking System) with EBS socket at the front, without connection cable Note: The trailer may only be towed by vehicles that can ensure the effectiveness of the ABS! With lift & lower valve Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System compliant with ECE R 141, display via truck monitor, via EBS, without truck installation (requirement must be met in truck; only for standard tires) Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked with indicators ('flashing side marker lights') 2 x 7-pin mistake-proof sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Body Steel round body in Stone Master design, made of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic unit and step on the front wall. Greenline – conical and aerodynamic body design External shovel and broom holder on front wall. Membrane - rear wall Rear wall as pendulum tailgate with double-joint hinge, externally mounted with dual hook locking. 2 clamping screws with toggle latches at the lower sides. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear and weight optimized construction. Standing platform with ladder, connection plate for air/electric and brakes with large free space for optimum operability. Roll tarpaulin stored to the FR-right, with central locking on FR-left Country of registration/ License plates Germany With Dekra approval and expert report (according to §13 EC - FGV) Body stability according to EN 12642 24/7 service hotline Prepared for single-line license plate holder Bodpji Ri Nijfx Abzedc Contour markings with reflective tape per ECE R 048, white on sides, red at rear Paintwork Frame DB 7350 Nova grey 10-year warranty against corrosion Support legs coated in black Body RAL color on request, single color depending on availability Roll tarpaulin RAL color on request, single color Also available with hydraulic rear wall

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT45001013946, boş ağırlık: 12.100 kg, azami yük ağırlığı: 37.900 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 3.200 mm, toplam uzunluk: 13.750 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.070 mm, süspansiyon: hava, lastik boyutu: 205/65 R 17,5 ", azami hız: 90 km/s, renk: mavi, Üretim yılı: 2024, Donanım: hidrolik arka platform, The images are archive photos; the vehicle may still be in use! Bdsdpjylkywofx Abzsc Jumbo Low Loader Chassis For transporting construction machinery up to 36,000 kg and a maximum outer width of 2,500 mm. Fifth wheel plate with replaceable 2" kingpin. Rear bevel approx. 1,500 mm and 7°. Ramp roller at the top closed with steel/tread plate. Trailer internal length (B-measure): 12,000 mm Free rear swing radius approx.: 2,350 mm Spare wheel holder with 1 spare wheel Plastic toolbox In the recessed deck, Omega rail on the lower outer frame as a hanging rail for tarpaulin and spacer to the lashing pins; not in the wheel area. Lashing Eyes Gooseneck: - 5 pairs of lashing eyes recessed in the outer frame, each rated at 5 tons - 2 pairs of lashing pins recessed top and side in the outer frame, each rated at 10 tons Recessed deck: - 7 pairs of lashing pins recessed top and side in the outer frame, each rated at 10 tons - 9 pairs of lashing eyes recessed in the outer frame, each rated at 5 tons - 3 pairs of folding lashing eyes additionally recessed in the low bed floor, each rated at 10 tons, positioned: 1x before the goose neck, 1x before the 1st axle, and 1x after the 3rd axle Axles & Suspension - Drum brake axles - Last 2 axles are self-steering - Air suspension with raise/lower valve + auto reset function - H & S function with quick release Wheels and Tires - 205/65 R 17.5 for 8,000 kg axle load (tech.) at max. 90 km/h - Steel rims in twin arrangement Brake System - 2-line air brake system - Spring-loaded parking brake - 2 fail-safe coupling heads at the front, without connecting line - Knorr EBS Electrics - 2 pairs of dual LED-illuminated and extendable warning panels - 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front - 24 volt, multi-chamber LED lights - Flashing side marker lights - Rotating beacon with bracket - LED work lamp inside on the front wall - 2 additional LED reversing work lights at the rear, activated by reverse gear Floor Reinforced for a maximum forklift axle load of 10,000 kg at a minimum tire width of 300 mm (Deformation possible!) Stanchions - 3 pairs of sliding stanchions, adjustable down the entire length, with 4-way pockets; only the rear 2 segments are equally long! - Pair of stanchion positions: 1x gooseneck, 3x recessed deck Stake Slats - 5 rows of wooden stake slats Access Ramps - Ramp surface with "Mega Grip" made of serrated grid (max. forklift axle load 9,000 kg at minimum 200 mm tire width) - Hydraulically operated via dedicated electric unit installed in a stainless steel box on front-right, incl. ramp control. Additionally, radio remote control incl. rear support operation, customer risk! - NATO socket on truck required, incl. spiral cable connecting to truck. Cable must be unplugged during driving! Truck not included. - Steel across the full width, approx. 3,300 mm long + 3 aluminum folding sections approx. 900 mm each, total ramp length 4,100 mm. If required, additional phenolic plate (max. 9 mm high) below aluminum sections for minimal approach angle. Ramp load capacity 26,000 kg, reinforced construction, top ramp roller with steel/tread plate. Ramp secured for transport with top link! Detailed specification on request!

Koşul: yeni, makine/araç numarası: 745183e095a8a43501797c66c, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/2022, lastik boyutu: -, Further Information Tandem Platform Trailer Type TPS 180 Standard Construction Material with Forklift Mounting Weights and Dimensions: Gross weight: 18,000 kg Unladen weight (basic version) approx.: 4,600 kg +/- manufacturing tolerance Payload approx.: 13,400 kg Drawbar load: 1,000 kg Overall length approx.: 9,925 mm Maximum overall width: 2,550 mm Overall height approx.: 3,150 mm Internal length approx.: 7,750 mm Internal width approx.: 2,480 mm Platform height approx.: 1,200 mm Coupling height approx.: 380 mm Drawbar length approx.: 2,150 mm Chassis Central Axle Trailer Fine-grain structural steel welded construction Outer frame, new version, slightly angled, with load-lock profile for attaching lashing straps 1 pair of landing gears at the front, with straight lower section, operated from the right side Bdjdpendwdhefx Abzoc 2 wheel chocks with holders Aluminum lateral underrun protection Steel rear underrun protection Quarter-shell mudguards 2 plastic toolboxes, with drawer and shelf, width = 650 mm / height = 520 mm / depth = 670 mm, lockable with padlock (padlock not included) Mounting for truck-mounted forklift at the rear, incl. 2 fork pockets, 2 extendable support tubes, chain securing mount with locking pin. Rear underrun guard with lighting unit foldable. Includes 2 loose rubber bumpers for rear wall protection, counterweight recommended! Note! Reduced ground clearance with forklift possible, potentially poorer trailing performance – no warranty! (Forklift own weight up to max. 1,900 kg for trailers). (With proximity switch for forklift control in combination with lift axle) Due to the forklift mounting, the axles are shifted to the rear; be aware of load distribution when driving without the forklift. Customer responsibility! Note! Forklift mounting! Carrying a forklift can significantly reduce the drawbar load. Front counterweight required! On wet and slippery roads, an additional customer-provided ballast weight or a load at the front bulkhead of at least 2 t is necessary; in this case, reduce speed and adapt driving to road and vehicle conditions. The forklift must always be secured with chains during transport. Distance between mast and body max. 45 mm; forklift tines must rest at the end of the fork pockets. We assume that the towing vehicle does not have a steering or lift axle, or that the steering axle is always locked or the lift axle is always on the ground. Towing Device Central Axle Trailer Drawbar with certified 50 mm towing eye, forwarding version (not suitable for trucks with tail lifts) Underrun coupling drawbar Foldable bracket with spring assist on the drawbar, for routing of connection cables to the truck Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension with lift & lower valve 1st axle automatic lift axle with proximity switch, for lift axle (only for operation with forklift) Wheels and Tires 385/65 R 22.5 to manufacturer’s choice Steel rims, factory silver Braking System 2-line compressed air brake system Spring-loaded parking brake Vehicle – Driving Stability System Duomatic connection at front, with connecting line to the tractor unit, connection on front right EBS, Electronic Braking System with EBS connector at front, including connection cable Attention: The trailer may only be towed by vehicles that guarantee effective ABS operation! Electrics 24 Volt, multi-chamber LED lights, lateral yellow LED lighting, license

Koşul: yeni, makine/araç numarası: 8af4af460e7016a96d927f8f6, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 385/55 r22.5, Further Information Chassis Swap Central Axle Trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of guide rollers, removable, front and rear 4 container locks with sturdy outriggers, 20-foot basis for swap bodies 7.15 / 7.45 and 7.82 1 pair gearbox support legs at front, with straight bottom part and single-side operation on FR right 2 wheel chocks with holders Side underrun protection, aluminum Side underrun protection set inward for optimal clearance for swap body supports Underrun guard, steel Half-shell mudguards Splash flaps Central axle trailer towing device Bsdpfoi Riw Ujx Abzodc Towing drawbar with tested 50 mm towing eye, forwarding version (not suitable for trucks with tail lift; exact check required for each order) Drawbar clamped/bolted, easily replaceable and partially adjustable in length! Lower coupler drawbar, free drawbar length approx. 2200 mm Coupling height: 380 (Note! Not printed in the offer; please compare with the technical data on the first page) Folding holder with spring support on the drawbar for guiding the connection cables to the truck Axles + Suspension SAF disc brake axles Axle/chassis laser alignment, reduces tyre wear and fuel consumption Air suspension Brake System 2-line compressed air braking system, color-coded line installation for easy service Air reservoir 208 liters Spring-actuated parking brake 2 fool-proof coupling heads at the front with connection lines to motor vehicle, connection on FR-right EBS, Electronic Braking System with EBS plug at front, with connection cable, connection on FR-right Attention: The trailer vehicle may only be towed by towing vehicles that ensure the functionality of ABS! With lift and lower valve, retaining function in both lower and raised positions Vehicle – Driving Stability System Wheels and Tyres 385/55 R22.5 — Brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lighting, side yellow LED lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable, FR-right connection Additional LED work light recessed in rear, switched on via reverse light LED work light at the front, centered between supports, directed to the rear, switched on via reverse light Registration Country/ Plates Germany With Dekra approval and inspection certification (according to §13 EG – FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, side white and rear red Paint Frame DB 7350 Novagrau 10-year corrosion warranty Attention: Archive images!

Koşul: yeni, makine/araç numarası: 06b624786df9f4b5c196a36b0, boş ağırlık: 3 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 14 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 285 / 70 r 19,5, Further information Chassis Central-Axle Tipping Trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearing 2-speed mechanical support leg at the front Foldable rear support Wheel chocks with holders Steel underrun protection Rear mudflaps along the entire width Quarter-shell mudguards Lockable storage compartment for loading ramps underneath the loading area Central axle drawbar system Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension SAF drum brake axles Axles/chassis laser aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and Tires 285 / 70 R 19.5, manufacturer’s choice Bsdpfxsi Ri Ipo Abzjdc Steel rims, factory silver Brake System 2-line pneumatic brake system Spring-loaded parking brake 2 misconnection-proof coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, including connecting cable Electrics 24 Volt, multi-chamber lamps, side-mounted yellow LED lighting 2 white position lamps at the front 2 white/red lane-keeping lamps at the rear All lighting in LED design (Note! With certain towing vehicles, malfunction warnings may occur even when lights are functioning correctly) 1 x 15-pin plug at the front with connecting cable Hydraulics Three-way tipping gear, hydraulic multi-piston press with lift limiter and safety cable Low-pressure cylinder up to max. 170 bar, without restrictor. If necessary, this must be retrofitted to the truck. Operated hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, including connecting hose Tipper Bodies Robust tipping body with 4 mm steel floor, steel drop-side construction, continuous side walls, drop and swing-mounted with central locking at the bottom. Rear corner stanchions removable. Tailgate drop and swing-mounted, with central locking at the bottom. Load bed length approx. 5,000 mm, side walls with 6 hinges at the bottom. Drop-side return springs (not possible with split side walls) Rear wall swinging and as double-leaf door (non-folding), with door holder and side protection rubber Load bed width: 2,420 mm 5 pairs of lashing eyes in the floor, each for 5 tonnes Registration/Country Plates Country of registration: Germany With Dekra inspection and certification (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized including passivation, 15-year warranty against rust-through Side wall/bodywork RAL 3002, Carmine Red Note: Bridge interior only primed! Note: Archive images!

Koşul: yeni, makine/araç numarası: 5b4d5b70c0e4954373dd5bf0b, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 435/50 r19,5, Further information Chassis Swap Central Axle Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with robust supports on a 20-foot basis for swap bodies 7.15 / 7.45 and 7.82 1 pair of gearbox support legs at the front, with straight base and single-sided operation on the right side (FR) 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Half-shell mudguards Splash flaps Central axle trailer drawbar Drawbar with certified 50 mm towing eye, forwarding version (not suitable for trucks with tail lift, further verification required per order) Underslung drawbar, free drawbar length approx. 2200 mm Coupling height: 380 mm (Note! Value not shown in the offer, please compare with the technical data on the first page) Axles & Suspension SAF disc brake axles Laser-measured axles/chassis to reduce tire wear and fuel consumption Air suspension Brake System 2-line pneumatic brake system, colored line routing for easy servicing Air reservoir 208 liters Spring-loaded parking brake 2 foolproof coupling heads at the front, with connecting lines to the truck, connection on right (FR) EBS, electronic braking system with EBS connector at the front, with connection cable, connection on right (FR) Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With raise/lower valve, holding function in raised/lowered position Wheels and Tires 435/50 R19.5, manufacturer at supplier’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin foolproof connectors at the front, with connecting cable, connection on right (FR) 2 additional LED work lights at the rear, activated via reverse light 1 LED work light front center between the supports, facing to the rear, activated via reverse light Country of Registration / License Plates Germany With Dekra inspection and certificate (according to §13 EC Vehicle Approval Regulation) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau, 10-year anti-corrosion warranty Bdjdpfxsi Ri Iws Abzoc Note: Archive images!

Koşul: yeni, makine/araç numarası: 535119ca408d3bd5a8e74be51, boş ağırlık: 6 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-loader Trailer Welded steel construction Turntable with heavy-duty ball bearing slewing ring, tool box recessed in the turntable frame Foldable rear support Wheel chocks with holders Aluminium side underrun protection Half-shell mudguards on 1st axle, quarter-shell mudguards in front of and behind the 2nd axle with anti-spray mudflaps behind each axle 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with padlock (lock not included) Bdjdpfx Abji Ri N Hozsc Extendable deck widenings to 3,000 mm (not in rear chamfer) (the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm), central compartment for timber planks on the loading area, 70 mm planks for widening to 3,000 mm Lashing Points Low-loader 3 pairs of 10 t lashing points integrated in the floor at the front 6 pairs of lashing mushrooms, 10 t each, recessed at the top and side in the outer frame 1 x after gooseneck, remaining distributed in between, spacing not greater than 1,200 mm 1 x rear chamfer 5 pairs of ring lashing eyes in the outer frame, 5 t each (instead of stake pockets) Trailer Drawbar Assembly - Turntable trailer Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser measured to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings Wheels and Tyres 235 / 75 R 17.5 As per manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connecting cable Note: This trailer may only be towed by tractor units that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side markers 2 white/red lane marker lights at the rear 2 white position lights at the front 1 revolving beacon with holder, switchable via parking light (beacon removable) 2 pairs of warning signs, double LED illuminated, extendable to 3,000 mm 2 x 7-pin interchange-proof plugs at the front, with connecting cable Deck Front section with steel floor, then 70 mm softwood floor, wheel arch areas with steel/chequer plate covering Rear chamfer with 70 mm softwood floor Low-loading area incl. rear chamfer 8,200 mm Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional foldable ramp lock at the bottom (prevents side slippage of ramps, not in combination with hydraulic side ramp adjustment) Wood covering Assisted by spring lifters Operating Notes Special permit is required for 10,000 kg axle load. Permit must be applied for individually in each federal state; the legislator is not obliged to guarantee a permit for 20 t GVW. Customer's responsibility. The specified total weight is technically possible, depending on the load, the permissible gross weight may not be achievable due to axle/support/saddle load restrictions. Registration / Plates Country of registration: Germany Test approval according to EC 2007/46 24/7-Service Hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, white on sides and red at rear Warning sign according to ECE - 70 Paintwork Frame: DB Novagrau Ramps: hot-dip galvanised Note: Archive photos!

Koşul: yeni, makine/araç numarası: d0373d7a64f0aead858df4eb5, boş ağırlık: 2.621 kg, azami yük ağırlığı: 15.379 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 385/55 r22.5, Further Information Chassis with Swap Body Turntable Fine-grain steel welded construction Fliegl V-Stream frame Front stop, longitudinally adjustable and foldable Pair of guide rollers removable, front and rear 4 container locks with solid outriggers on 20-foot base for swap bodies 7.15 and 7.45 Turntable with heavy-duty ball bearing slewing ring Wheel chocks with holder Side underrun protection aluminium (Fliegl standard) Side underrun protection fitted inward, for optimal clearance to swap body supports Rear underrun protection, steel (Fliegl standard) Rear underrun protection shortened for optimal clearance to swap body supports, light units mounted protected Half-shell mudguards (Front, where technically feasible, otherwise with sheet metal cover + quarter-shell mudguards) With anti-spray flaps behind each axle Rubber rear-end buffer Drawbar trailer turntable coupling Drawbar with certified 40 mm towing eye Parking sockets for electrics/ABS on drawbar Brake/electrics terminal plate on drawbar, EBS and electrics removable, all connection lines to towing vehicle as spiral flex hoses Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Brake System 2-line compressed air brake system Coloured line routing for easier servicing Air reservoir 208 litres Spring-loaded parking brake Duomatic connection at front, with connecting line to truck, spiral cable EBS by Wabco, electronic braking system with EBS plug at front, with removable spiral connection cable Attention: The trailer may only be towed by vehicles that ensure the ABS function! With raise & lower valve, hold function in both raised/lowered positions + auto-reset function, quick release valves on all axles Vehicle Stability Control System Axle load detection via EBS CAN-bus signal, for display in the driver’s cab, truck must be pre-equipped accordingly, no calibration/legal weighing system installed Wheels and Tyres 385/55 R22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber LED tail lights with resistor, side yellow LED lights, LED licence plate illumination (note: on certain towing vehicles, fault diagnostics may occur despite function) Bedpfji Ri Rgox Abzjdc 2 white LED position lights at front 2 white/red LED lane marker lights at rear 1 x 15-pin plug at front, with removable spiral connection Additional LED work lamps at the rear, switched via reverse light LED work lamp front centre between chassis beams, rear-facing, switched via reverse light Registration Country / Plates Germany With manufacturer’s confirmation + brake calculation 24/7 service hotline Prepared for single-line number plate holder Warning plate to ECE-70 Contour marking with reflective tape to ECE R048, white side and red at rear Paintwork Frame DB 7350 Novagrau 10-year warranty against rust-through Attention: Archive pictures!

Koşul: yeni, makine/araç numarası: 9de849c07b4d917b8d8e1d037, boş ağırlık: 2.990 kg, azami yük ağırlığı: 15.010 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 265/70 r19,5, Further information Chassis Swap Turntable Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-foot base for swap bodies 7.15 and 7.45 meters Turntable featuring a robust ball bearing slewing ring Wheel chocks with holders Aluminum side underrun protection Side underrun protection set inward for optimal clearance to swap body supports Steel rear underrun protection Shortened rear underrun protection for optimum clearance to swap body supports, lighting system mounted in a protected position Quarter-shell mudguards at the front and half-shell mudguards at the rear Coupling device for turntable trailer Drawbar with tested 40 mm towing eye Drawbar mechanically length adjustable in 6 x 100 mm increments (approx. 1700 – 2300 mm), drawbar length currently set to 2200 mm Axles & Suspension SAF disc brake axles Geometry/alignment of axles and chassis by laser to minimize tire wear and reduce fuel consumption Air suspension Brake System 2-line compressed air braking system with color-coded lines for easy servicing Air reservoir 180 liters Spring-loaded parking brake 2 error-proof coupling heads at the front, with connecting lines to the truck EBS by Wabco, electronic braking system with EBS socket at the front, with connecting cable Note: The trailer must only be towed by tractor units that ensure ABS functionality! With lift & lower valve, holding function in both raised and lowered positions Wheels and Tires 265/70 R19.5, manufacturer as specified by OEM Steel twin wheels, factory silver Electrical System 24 Volt, multi-chamber LED lights with resistor, side amber LED lighting, license plate illumination in LED (note: some tractor units may display error messages, although functionality is assured) 2 white LED position lights at the front 2 white/red lane marker LED lights at the rear 2 x 7-pin error-proof plugs at the front, with connecting cables Additional LED work lights on both sides of the rear, operated by the reversing light Central front-mounted LED work light between support beams, rear-facing, operated by the reversing light Registration/Country & Plates Germany With Dekra inspection and certificate (per §13 EC-FGV) 24/7 service hotline Incl. loading for 2/3 stack, loading racks against deposit Bdsdpfoi Ri Rnsx Abzjc Prepared for single-line license plate holder Contour marking with reflective tape in accordance with ECE R 048, white on the sides and red at the rear Painting Frame DB 7350 Nova Grey 10-year anti-perforation warranty Note: Archive images!

Koşul: yeni, makine/araç numarası: 195f80ad09517628522e33a91, boş ağırlık: 7.300 kg, azami yük ağırlığı: 16.700 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis low-loader trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Aluminum side underrun protection Full-width rear mudflap Quarter-shell mudguards in front of the 1st axle 1st pair of wheel recesses embedded in the deep bed lane area after the step, sloped for entry, approx. 1600 mm long at the bottom, approx. 400 mm deep. Note: The frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses embedded between the axles in the deep bed lane area, sloped for entry, approx. 600 mm long at the bottom, approx. 300 mm deep. Note: The frame in the main beam area is 300 mm higher than the wheel recess. Extensions telescopic to 3,000 mm (not at rear taper) (The track width of the construction machines or vehicles to be transported, however, must not exceed the external frame width of 2,550 mm) Extensions telescopic to 3,000 mm, also in the wheel recesses at the bottom, foldable at the wheel recess extensions (widening not at the rear taper) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Lashing eyes low-loader 1 pair of lashing cutouts in the front longitudinal beam, recessed in the area of the step, each rated for 10 t 4 pairs of lashing holes in the external frame, each rated for 5 t (for attachment of lashing straps) 7 pairs of lashing mushrooms recessed at the top and side in the external frame, each rated for 10 t 1 x front in the step 6 x in the deep bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm Drawgear - Turntable trailer drawbar Drawbar with tested 40 mm drawbar eye Axles + Suspension SAF drum braked axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mountings Wheels and tyres 235/75 R 17.5 manufacturer's choice Steel rims in twin arrangement, factory silver Brake system 2-line air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connecting lines to the tractor unit, ABS and ALB, with ABS connector at the front, including interconnecting cable. Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lights, yellow side LED lighting, 2 white position lights in front 2 white/red lane marker lights at rear 2 x 7-pin foolproof plugs at front with connecting cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front step with steel/chequer plate covering Storage box recessed in the approach slope to the step, followed by 70 mm softwood floor, in the wheel housing area with steel/chequer plate covering Rear slope with 70 mm softwood floor Low-loader area including rear slope 6500 mm Bsdpoi Ri Rvsfx Abzedc Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable with wooden covering with spring-assist lifting Operating notes For an axle load of 10,000 kg, a special permit is required; only indivisible loads permitted!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achieved while observing the permissible axle, load and fifth wheel loads. (Poor d

Koşul: yeni, makine/araç numarası: 1acf251a278ec5cde4067a7b1, boş ağırlık: 5.800 kg, azami yük ağırlığı: 22.200 kg, toplam ağırlık: 28.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5, Further information Chassis Semi-Trailer Forwarder Fine-grain steel welded construction, fifth wheel plate with replaceable 2-inch kingpin Outer frame slightly inclined, new version with load-lock profile for lashing straps 24 t, 2-speed landing gear, operated from one side, straight base, without compensating mechanism Free landing gear corner dimension or rear swing clearance approx. 1920 mm 2 wheel chocks with holders Side underrun protection aluminium Rear underrun protection steel Quarter mudguards in front of and behind each axle 1 spare wheel holder for 1 spare wheel, with wheel fastening kit 1 plastic toolbox, with shelf, width=620 / height=360 / depth=440 mm, lockable with padlock (padlock not included) Axles & Suspension Drum brake axles, as per manufacturer’s choice Axles/chassis laser-measured to reduce tyre wear and fuel consumption Air suspension Brake system 2-line compressed air brake system, color-coded line routing for easier servicing Spring-applied parking brake Duomatic coupling front, without connecting hose EBS, electronic braking system with EBS socket at the front, without connecting cable Bedpekv Uvzofx Abzjdc Attention: The trailer may only be towed by towing vehicles that can guarantee the effectiveness of the ABS! With lift & lower valve Vehicle stability system Wheels and tyres 235/75 R17.5, brand at manufacturer’s choice Steel rims, factory silver Electrics 24 volt, multi-chamber tail lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin socket at the front, without connection cable Floor Approx. 30 mm thick phenolic resin plywood for high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front panel / corner posts front 25 mm aluminium hollow section, approx. 1,350 mm high, corner posts steel in volume version Country of registration / plates Germany With DEKRA inspection and certificate (according to §13 EC-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Conspicuity marking with reflective tape in accordance with ECE R 048, white on the sides and red at the rear Paint Frame hot-dip galvanized including passivation, 15-year anti-perforation warranty Front wall aluminium Attention! Archive images shown!