Kullanılmış Saeulenschwenkkran Schwenkkran Drehkran 125 Kg 3650Mm (2815) satın al (68.720)

Durumu: yeni, Üretim yılı: 2026, Kabin 4-eksen kontrollü Temizleme kalıplar, çelik yüzük, ingot patlatma basınç alüminyum, lastik kalıp, basarak araçlar, vb kalıpları. Jets seyahat serbestçe programlanabilir. 2 adet otomatik meme ve parçalar temizlik için 1 St el meme. HARDOX pikap ve yem kumlama makinesi uzun süreli kullanım için canı cehenneme. Teknik özellikleri ilgili sorular için vb bize ulaşın yazılı olarak veya telefonla. 1971 Harth ve Seifert - Georg Fischer - SAH beri Großenlüder sitesinde üretimi ve Seidl - Oliver Fritz GmbH & Co. KG uzun süredir bilinen kişiler ile makineler temelidir. Kdjdpfx Aaodrtanegjk

Durumu: yeni, Üretim yılı: 2026, Shot blasting abrasive feed screw 5m with metering cover For installation as a cross conveyor screw to the bucket elevator at the end of the hall (inserting abrasive across the full hall width with a forklift). - 5m plus outlet to the bucket elevator, solid flight screw Ø250mm with 5mm thick screw blades. - Can be used as an abrasive storage hopper. Shot blasting system draws media automatically via level sensor as needed. - Depending on installation depth, up to 24 hours of continuous blasting without cleaning the hall required. - Hall cleaning in 10 minutes using forklift or wheel loader. Kdedpfx Asynz Idoagsk - Very low maintenance and repair costs compared to a complete conveyor floor. - Particularly suitable for very heavy workpieces. - Lower acquisition costs compared to a fully covered conveyor floor. - Lower foundation costs compared to a fully covered conveyor floor. - Can be inserted across the entire hall width, unlike a sweep pit. - Very high temporal warranty.

Durumu: yeni, Üretim yılı: 2026, 200L mobile pressure blasting pot, suitable for construction sites or stationary use. Fittings are safely mounted under the handle. Ideally suited for robust construction site applications. comprising: - 200L pressure vessel - Pre-screen - Weather protection lid - Water separator - Pressure regulator - Adjustable conveying air (airflow for pot and blast hose) - Blast hose Ø25mm, 10m - Venturi blast nozzle Ø8mm (air consumption at 6 bar approx. 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blast helmet Safety equipment: - Dead man's switch with control cable - Remote-controlled quick venting Optional: Ksdpfx Aajynr E Tjgedk - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with bucket and lid adapter for several hours of blasting without refilling - etc. Made in Germany

Durumu: yeni, Üretim yılı: 2026, 140L mobile pressure blasting pot for construction site or stationary use. Fittings securely mounted under the handle. Ideally suited for robust construction site applications. Includes: - 140L pressure vessel - Pre-filter sieve - Weather protection cover - Water separator - Pressure regulator - Adjustable conveying air (airflow regulation for pot and blast hose) Kdsdpoynr E Hsfx Aagek - Blast hose Ø25mm, 10m - Venturi blast nozzle Ø8mm (Air consumption at 6 bar: approx. 3.57 m³/min) - Abrasive mixing valve, Y-piece, rubberized for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety features: - Dead-man switch with control cable - Controlled quick air release Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with Hobbock and lid for extended blasting without refilling - etc. Manufactured in Germany.

Durumu: yeni, Üretim yılı: 2026, Taşınabilir 100 litrelik basınçlı kumlama kazanı, şantiyelerde veya sabit kullanım için uygundur. Tüm armatürler güvenli bir şekilde tutma kolu altında yerleştirilmiştir. Zorlu şantiye koşulları için oldukça uygun. İçerik: - 100 litrelik basınçlı kazan - Ön elek - Hava koşullarına dayanıklı kapak - Su ayırıcı - Basınç regülatörü - Üfleme havası ayarı (kazan ve kumlama hortumu için hava miktarı) - Kumlama hortumu Ø25mm, 10m - Venturi kumlama memesi Ø8mm (Hava tüketimi 6 bar’da yaklaşık 3,57 m³/dk) - Aşınmayı azaltan, lastik kaplamalı Y tipi kum/hava karıştırma vanası - 10m hava hortumlu nefes alma hava filtresi - Kumlama başlığı/koruyucu kask Kedpfjynr Emjx Aagjdk Emniyet donanımı: - Kumanda kablolu ölü adam switch - Kontrollü hızlı havalandırma Opsiyonel ekipmanlar: - Daha büyük tutma kolu ve hortum askısı - Islak kumlama başlığı - Solunum havası ısıtıcısı - Takviye ile uzun süreli kesintisiz kumlama için varil ve kapaklı taşıma çerçevesi - vs. Almanya'da üretilmiştir.

Durumu: yenilenmiş (kullanılmış), Kullanılmış K + G Wetter WW 130mm açılı öğütücü, hem taze hem de hafif donmuş ürünleri öğütmek için tasarlanmış güvenilir ve dayanıklı bir cihazdır. Küçük ve orta ölçekli üretim tesisleri için mükemmeldir. Tamamı paslanmaz çelikten yapılmıştır, bu da işte en yüksek hijyeni ve bakım kolaylığını garanti eder. İki hıza sahiptir 11/19kW Plaka delikleri: 2, 3, 5, 8, 10, 12 mm Üretici firma: K+G Wetter Model: WW 130 Yükseklik: 1950 mm Genişlik: 1400 mm Uzunluk: 1500 mm Ağırlık: 800 kg Kapasite: 185l l Elektrik güç kaynağı: 400V 50Hz 3N Toplam güç: 11/19kW Boğaz Çapı: 130 mm Ksdpfx Aask Tzwlsgjdk

Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, güç: 0,48 kW (0,65 bg), giriş voltajı: 380 V, giriş akımı: 2 A, Donanım: devir hızı sonsuz değişken, Bu kullanılmış Hubert+Moser KG 80KF3 şerit testereyi, üretim yılı bilinmemekle birlikte, satışa sunuyoruz. Herhangi bir sorunuz varsa veya daha fazla bilgiye ihtiyacınız olursa, lütfen bize mesaj gönderin veya bizi arayın. Kdjdpoymflqofx Aagsk

Durumu: iyi (kullanılmış), Üretim yılı: 2005, çalışma saatleri: 15.606 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 50 t, dolum açıklığı genişliği: 1.050 mm, dolum ağzı uzunluğu: 1.250 mm, balya uzunluğu: 1.200 mm, balya genişliği: 1.100 mm, balya yüksekliği: 700 mm, balyanın ağırlığı: 500 kg, güç: 30 kW (40,79 bg), hacim debisi: 160 m³/saat, Good day, We hereby offer you, without obligation, a used baler from the manufacturer Presto GmbH & Co. KG, type HPK 50 B. The following technical data have been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we cannot assume any liability. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Pressing force (main ram): 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Kdjdpjyplwfsfx Aagek Throughput under operating conditions (with a bulk density of 60 kg/m³): approx. 6.7 t/h Machine weight (press): 12.5 t Note: The machine has been serviced in our workshop (the main control valve on the hydraulic block was replaced) and tested under operating conditions, both in manual and automatic mode. The machine documentation is available in German. Viewing of the baler is possible by appointment at our workshop. We would be pleased if this machine is of interest to you. Your Serviceteam Mertens & Frowein GmbH

Durumu: mükemmel (kullanılmış), Çerçeve Kdedomkfd Sjpfx Aagjk (28388) SPH 360 mm Ağırlık 37 kg Boyutlar, çizime bakınız

Durumu: kullanılmış, Üretim yılı: 1989, Teknik detaylar: Uzunluk: 12.200 mm Genişlik: 2 500 mm Yükseklik: 2.600 mm Kdodpfsu N Anhox Aagok Makine ağırlığı yaklaşık: Kendi ağırlığı yaklaşık 4,5 t 2 konteyner 40 feet, ısıtmalı Yangın söndürme maddesi konteyneri - Yalıtımlı konteyner (gıda soğutmalı konteyner) Deutsche Bahn (DB) tarafından kabul 20.000 litre su tanklı yangın söndürme konteyneri 2 adet galvanizli kilitleme çubuğuna sahip 2 kanatlı arka kapılar, her biri 1 inç ve kanat başına 4 menteşe (paslanmaz çelik vidalarla tutturulmuş bağlantı parçaları) Uzunlamasına kaynaklı profillerden oluşan 65 mm yüksekliğindeki T-ızgaradan yapılmış zemin Karıştırma istasyonu, ilgili elektronik ve borulama ile birlikte, pompa istasyonu (pompasız) Verilen konteyner ölçüleri dış ölçülerdir. İD. *

Durumu: iyi (kullanılmış), Üretim yılı: 1973, makine/araç numarası: 73040, Kabartma presi Baier GEBA 1/F, montaj yüksekliği 90 mm, basınç kapasitesi 800 kg, çalışma boyutu 10 cm x 14 cm, üretim yılı 1973, makine numarası 73040, iyi durumda, hemen teslime hazır Kdodpfx Aajvt Rpqegjk İlginizi çekerse firmamızın diğer makineleri hakkında da sizleri bilgilendirmekten mutluluk duyarız. Randevu alarak makinemizi tesisimizde inceleyebilirsiniz.

Durumu: kullanılmış, Üretim yılı: 1984, yük kapasitesi: 3.200 kg, Şu anda stokta 3 adet mevcut. Tek Kirişli Yarı Portal Vinç Üretici: Christmann & Pfeifer KG Kaldırma Donanımı: Demag Model: PLV 168 NF Kapasite: 3200 kg Yürüyüş Takımı: Demag Tip: 13/6PF 12/4 Kanca Çalışma Mesafesi: 4800 mm Ray Masafası (Merkezden merkeze): 8110 mm Ağırlık: Yaklaşık 2 ton/adet Fiyat, her bir parça için yüklemeye hazır teslim olarak belirtilmiştir. Kjdpfjw Ugu Aex Aagodk Vinçler demonte edilmiştir ve nakliyeye uygun şekilde ambalajlanmıştır. Makine yerinde görülebilir. Tüm bilgiler taahhütsüzdür. Ön satış hakkı saklıdır.

Durumu: mükemmel (kullanılmış), Üretim yılı: 2017, çalışma saatleri: 150.050 h, Fonksiyonellik: tamamen fonksiyonel, kontrolör üreticisi: Heidenhain, kontrolör modeli: iTNC530, döner tabla çapı: 500 mm, toplam ağırlık: 13.000 kg, maksimum mil hızı: 14.000 dev/dak, iş mili çalışma saatleri: 6.950 h, soğutucu temini: 20 bar, mili burnu: HSK 63, takım magazinindeki yuva sayısı: 60, Donanım: devir hızı sonsuz değişken, talaş konveyörü, yağ buharı separatörü, • Condition: Excellent condition • Operating hours: 6,950 • KESSLER rotary table, Ø 500 mm • Tool magazine: 60 stations, HSK-A63 Kdodpfxjx Hg Ibo Aagjk • Internal coolant supply: 20 bar, with belt filtration system • Coolant unit: Automatic coolant level monitoring • Air through the spindle • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch system), incl. workpiece measurement preparation • Collision monitoring: POS DCM module • Media supply: 3-channel media supply through table center • Viewing: Rotating inspection window • Handwheel Please send us your inquiry directly via our website if you are interested in the machine. Due to technical reasons, submitting a direct inquiry for an offer via third-party portals is difficult and may only be possible with a delay.

Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, güç: 4 kW (5,44 bg), yakıt türü: dizel, toplam ağırlık: 550 kg, azami yük ağırlığı: 500 kg, zincir durumu: 100 yüzde, Üretim yılı: 2025, Donanım: hidrolik, kauçuk paletler, Tracked Dumper 500S The professional high-lift dumper for maximum efficiency on the construction site The Tracked Dumper 500S stands for powerful material transport, precise unloading, and reliable technology. With its hydraulic lifting function up to 1,200 mm, it is the ideal solution for direct discharge into containers, trailers, or elevated loading platforms – efficient, safe, and time-saving. Thanks to its compact dimensions, high payload, and robust design, the Tracked Dumper 500S is perfect for confined construction sites, rough terrain, and continuous professional use. Your advantages: - Hydraulic lift and tip function (90°) for convenient unloading - Lift height up to 1,200 mm – ideal for containers and trailers - Powerful Koop 173 diesel engine (4.0 kW, EU Stage V) - High payload of 500 kg with compact exterior dimensions - Optimum traction thanks to wide crawler track undercarriage - Sturdy, low-maintenance and durable construction - Ideal for construction, landscaping, municipal applications, and agriculture Technical data: Engine: Koop 173 diesel engine Power: 4.0 kW Emission standard: EU Stage V Performance & Capacity: Unladen weight: 550 kg Payload: 500 kg Skip volume: 200 l Kodoyml D Hspfx Aagodk Skip dimensions: 1,050 × 730 × 730 mm Lift & tip function: Max. lifting height: up to 1,200 mm Tipping height: 1,050 mm Tipping reach: 220 mm Tipping angle: 90° Operation: hydraulic Undercarriage: Type: crawler track Track width: 180 mm Ground contact length: 1,000 mm Ground clearance: 110 mm Track gauge: 520 mm Performance: Travel speed: up to 4 km/h Gradeability: up to 20° Minimum turning radius: 1,150 mm Dimensions: Overall dimensions (L × W × H): 1,570 × 880 × 1,450 mm Undercarriage width: 700 mm The Tracked Dumper 500S impresses wherever reliability, agility, and lifting performance are required: - Building and civil engineering - Landscaping and horticulture - Municipal services - Agriculture - Material handling in confined spaces Net price: €3,800 (RRP) Location: Rheda-Wiedenbrück Inspection possible by appointment Save now – better price available! Take advantage of our attractive promotions. An inquiry is worthwhile!

Durumu: mükemmel (kullanılmış), Üretim yılı: 2011, Fonksiyonellik: tamamen fonksiyonel, güç: 9,7 kW (13,19 bg), Technical Data Cardboard Shredder (2-Shaft Shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Year of manufacture: 2007 Throughput: 130 m³/hour Speed: 37/9 rpm Motor power: 7.5 / 2.2 kW Electrical connection: 32 A Shredder internal dimensions: 1,490 x 1,320 x 530 mm (L x W x H) Shredder external dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine weight: 0.45 t Application of the machine: The PZA cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cardboard boxes from the returns department before pressing them into bales. The boxes were manually placed onto the feed conveyor, transported directly via a flat belt conveyor to the shredder, and shredded. The pre-shredded cardboard was then conveyed over several hundred meters to the baling press for compaction. Kdsdpfeu Tha Ijx Aagok Scope of delivery: 1 unit Presto Cardboard Shredder (2-Shaft Shredder) type PZA Remarks: The cardboard shredder was an essential component of the disposal line and received regular maintenance to ensure high availability for the returns department. The machine is in good condition and ready for immediate use. The price is stated per unit, ex works our warehouse in Siddeburen, Netherlands. All documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Inspection by appointment possible. We assume no liability for the technical specifications or any possible errors.

Durumu: iyi (kullanılmış), Üretim yılı: 2010, çalışma saatleri: 3.641 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 36 t, dolum açıklığı genişliği: 1.100 mm, dolum ağzı uzunluğu: 1.080 mm, balya genişliği: 1.100 mm, balya yüksekliği: 750 mm, güç: 15 kW (20,39 bg), hacim debisi: 90 m³/saat, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of manufacture: 2010 Operating hours: 3,641 hours Main press force: 36 t Specific pressing force: 467 N/cm² Feed opening dimensions: 1,080 x 1,100 mm (L x W) Cycle time: 34 seconds Fill volume per cycle: 0.85 m³ Theoretical throughput: 90 m³/hour Operating throughput with bulk material density of 35 kg/m³: approx. 51 m³/hour Ksdpfxsu Thh Ee Aagedk Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 15 kW Tying: 4-fold vertical, semi-automatic, with polyester twine Throughput at bulk densities of: 35 kg/m³: 1.8 t/hour 60 kg/m³: 2.5 t/hour 100 kg/m³: 3.1 t/hour Transport dimensions – press only: 4,200 x 1,640 x 2,200 mm (L x W x H) Machine weight (press): approx. 4 t Notes: The baler has been tested for functionality in our workshop, subsequently placed in storage and is therefore available at short notice. Machine documentation (operating manual, CE certificate, electrical and hydraulic circuit diagrams) is included. Inspection can be arranged by appointment. We accept no liability for technical data or possible errors.

Üretim yılı: 2019, Durumu: işlem için hazır (kullanılmış), Bir adet KG Bremen karıştırma tankı ve iki adet karıştırıcı PRG ve IKA mevcuttur. 1) Karıştırma tankı KG Bremen, üretim yılı: 2019, maks. çalışma basıncı: atmosfer, maks. çalışma sıcaklığı: 80°C, hacim: 1150 l, maks. ceketli çalışma aşırı basıncı: 5 bar, maks. ceketli çalışma sıcaklığı: 80°C, malzeme: 1.4301. 2) Hassas karıştırıcı PRG R112M-6, üretim yılı: 2004, karıştırıcı uzunluğu: 930 mm, karıştırma organı çapı: 160 mm. 3) Hassas karıştırıcı IKA RF 04-T-1085, üretim yılı: 1999, toplam uzunluk: 1100 mm, karıştırma organı çapı 1/2: 160 mm/200 mm. Yerinde inceleme mümkündür. Kdsdpfx Aexhntreagsk

Üretim yılı: 1994, Durumu: işlem için hazır (kullanılmış), Bir Emmegi (Pressta Eisele) çift gönye testere mevcuttur. Testere bıçağı çapı: 500mm, testere kafaları: 2, testere başı döndürme aralığı: 90°-45°, kesim uzunluğu aralığı: 250mm-5000mm, maks. kesim yüksekliği: 350mm, maks. kesim genişliği: 160mm. Makine boyutları (X/Y/Z): yaklaşık 5750mm/1250mm/1700mm, ağırlık: yaklaşık 1250kg. Dokümantasyon mevcut. Yerinde inceleme mümkündür. Kjdpfx Aaex Ecufjgedk

Durumu: yeni, TECHNICAL DATA: - Base area: 10,000 x 24,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard P6 raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The platforms can be expanded according to the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Columns - Primary and secondary beams - Bracing cross members - Flooring - Fixing materials Price examples: 30 m² | Area: 5,000 x 6,000 mm | €2,685.00 net, plus shipping costs and VAT 60 m² | Area: 5,000 x 12,000 mm | €4,785.00 net, plus shipping costs and VAT 90 m² | Area: 5,000 x 18,000 mm | €6,855.00 net, plus shipping costs and VAT 120 m² | Area: 5,000 x 24,000 mm | €8,955.00 net, plus shipping costs and VAT Kedpfx Ajxpizajagjdk 60 m² | Area: 10,000 x 6,000 mm | €4,785.00 net, plus shipping costs and VAT 120 m² | Area: 10,000 x 12,000 mm | €8,645.00 net, plus shipping costs and VAT 180 m² | Area: 10,000 x 18,000 mm | €12,495.00 net, plus shipping costs and VAT 240 m² | Area: 10,000 x 24,000 mm | €16,335.00 net, plus shipping costs and VAT Further variants available. Please contact us. Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Collision protection - Diagonal supports instead of bracing cross members available for an additional charge YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & MANUFACTURING TO SIZE This platform system is an example taken from our standard range. Of course, we design and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, assembly height and intended application. Based on your specifications, our design department will create a custom, non-binding offer for you. Whether for a new build, extension or modernization of existing systems, we will support you with solid expertise and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible at an extra charge. The additional costs depend on the place of delivery and the scope of the shipment and can be requested from us individually. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The price is understood as a unit/net price or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown. ABOUT US The company DLK in Nordhorn trades in new and used products from the areas of warehouse logistics, conveyor technology, mezzanine platforms, textile storage as well as machines for trade, industry and crafts. We continuously offer you attractive used equipment from various manufacturers/brands under favourable terms. If you have any questions, please feel free to contact us. ✅ Four strong pillars – The building blocks of DLK success – Warehouse Technology | Levelmaker® | Logistics | Solutions

Durumu: yeni, TECHNICAL DATA: - Base area: 15,000 x 20,000 mm [other variants available] - Grid: 5,000 x 5,000 mm - Top edge of floor finish: 3,340 mm - Clear height: 3,000 mm [customizable] - Floor finish: 38 mm chipboard, P6 raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new Kdjdpfjxpic Rex Aagok The platforms can be extended in the specified grid as standard. Other sizes and heights are available on request. Our team will be happy to advise you! Delivery scope: - Columns - Main and secondary beams - Diagonal cross bracing - Floor finish - Fastening material PRICES: 25 m² | Area: 5,000 x 5,000 mm | €2,345.00 net, plus transport costs and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,135.00 net, plus transport costs and VAT 75 m² | Area: 5,000 x 15,000 mm | €5,835.00 net, plus transport costs and VAT 100 m² | Area: 5,000 x 20,000 mm | €7,645.00 net, plus transport costs and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,555.00 net, plus transport costs and VAT 150 m² | Area: 10,000 x 15,000 mm | €10,985.00 net, plus transport costs and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,175.00 net, plus transport costs and VAT 300 m² | Area: 15,000 x 15,000 mm | €20,515.00 net, plus transport costs and VAT 400 m² | Area: 20,000 x 20,000 mm | €26,675.00 net, plus transport costs and VAT 500 m² | Area: 20,000 x 25,000 mm | €30,035.00 net, plus transport costs and VAT Further variants available. Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Collision protection - Diagonal supports instead of cross bracing, available at an extra charge YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist with transportation and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. The additional costs depend on the delivery location and the volume of the shipment and can be requested individually. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is a single net unit price or as specified in the description text (plus VAT). You will of course receive an invoice stating VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment deals from various manufacturers/brands at competitive conditions. Feel free to contact us with any questions. Four wins – The DLK success modules – Storage technology | Levelmaker® | Logistics | Solutions

Durumu: yeni, TECHNICAL DATA: - Base area: 20,000 x 15,000 mm [other versions available] - Grid: 5,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm [customizable] - Floor covering: 38 mm particle board, grade P6, raw/white - Load capacity: 500 kg - Colour: RAL of your choice, powder-coated - Condition: new The platforms can be extended in the specified grid as standard. Other sizes and heights available on request. Our team will be pleased to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Floor panels - Fastening material Example prices: 25 m² | Area: 5,000 x 5,000 mm | €2,445.00 net, plus shipping and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,335.00 net, plus shipping and VAT Kdsdpfx Aasxpii Regok 75 m² | Area: 5,000 x 15,000 mm | €6,170.00 net, plus shipping and VAT 100 m² | Area: 5,000 x 20,000 mm | €8,035.00 net, plus shipping and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,945.00 net, plus shipping and VAT 150 m² | Area: 10,000 x 15,000 mm | €11,415.00 net, plus shipping and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,985.00 net, plus shipping and VAT 300 m² | Area: 20,000 x 15,000 mm | €21,425.00 net, plus shipping and VAT 400 m² | Area: 20,000 x 15,000 mm | €28,155.00 net, plus shipping and VAT 500 m² | Area: 20,000 x 25,000 mm | €33,935.00 net, plus shipping and VAT Further variations available Optional accessories: - Railing - Flush wall connection - Staircase - Transfer station - Collision protection - Diagonal supports instead of bracing crosses (at extra cost) YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & PRODUCTION TO MEASURE This platform system is an example from our standard range. Of course, we can develop and manufacture your mezzanine floor according to your specific operational requirements – tailored to your floor space, load capacity, structure height, and the intended area of application. Our planning department will prepare a customized, non-binding quotation based on your specifications. Whether for new buildings, extensions, or modernization of existing systems – we support you with specialist expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist with transport and installation of the goods. This item is available for collection. Delivery or shipping is available at extra cost. Additional costs depend on the destination and size of the shipment and can be requested individually from us. PAYMENT TERMS Payment terms to be agreed upon in case of order. Prices are quoted per item/net or as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ✅ Four wins – The four key success factors at DLK – Warehousing technology | Levelmaker® | Logistics | Solutions

Durumu: yeni, TECHNICAL DATA: - Footprint: 16,000 x 20,000 mm [other variants available] - Grid: 4,000 x 5,000 mm - Top edge of floor covering: 3,340 mm Kodpoxpha Isfx Aagsdk - Clear height: 3,000 mm [adjustable] - Floor covering: Chipboard 38 mm P6 raw/white - Load capacity: 500 kg - Colour: RAL of your choice, powder-coated - Condition: new Scope of delivery: - Columns - Primary and secondary beams - Bracing cross members - Floor decking - Mounting material PRICE examples: 20 m² | Dimensions: 4,000 x 5,000 mm | €2,135.00 net, plus transport and VAT 40 m² | Dimensions: 4,000 x 10,000 mm | €3,825.00 net, plus transport and VAT 60 m² | Dimensions: 4,000 x 15,000 mm | €5,435.00 net, plus transport and VAT 80 m² | Dimensions: 4,000 x 20,000 mm | €7,215.00 net, plus transport and VAT 40 m² | Dimensions: 8,000 x 5,000 mm | €3,725.00 net, plus transport and VAT 80 m² | Dimensions: 8,000 x 10,000 mm | €6,519.00 net, plus transport and VAT 120 m² | Dimensions: 8,000 x 15,000 mm | €9,695.00 net, plus transport and VAT 160 m² | Dimensions: 8,000 x 20,000 mm | €12,755.00 net, plus transport and VAT 120 m² | Dimensions: 10,000 x 12,000 mm | €8,995.00 net, plus transport and VAT 80 m² | Dimensions: 16,000 x 5,000 mm | €6,785.00 net, plus transport and VAT 160 m² | Dimensions: 16,000 x 10,000 mm | €12,472.00 net, plus transport and VAT 240 m² | Dimensions: 16,000 x 15,000 mm | €18,108.00 net, plus transport and VAT 320 m² | Dimensions: 16,000 x 20,000 mm | €23,565.00 net, plus transport and VAT Optional accessories: - Guard rail - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal braces instead of bracing cross members available at extra cost YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOMISED PLANNING & MANUFACTURING The mezzanine platform presented here is an example from our standard product range. Of course, we also develop and manufacture your storage platform exactly according to your business requirements – tailored to your space, load capacity, installation height, and intended area of use. TRANSPORT & INSTALLATION We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged at an additional charge. The extra costs depend on the delivery location and scope of the order and can be inquired on an individual basis. PAYMENT TERMS Payment terms are to be agreed upon order. The price is per unit/net price, or as stated in the description (plus VAT). You will of course receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for commerce, industry, and crafts. ✅ Four wins – The cornerstones for success at DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Durumu: yenilenmiş (kullanılmış), Üretim yılı: 2009, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 30214501, torna boyu: 2.000 mm, toplam uzunluk: 12.000 mm, WFL Millturn M60-G/2000 ÇALIŞMA ARALIĞI Merkez mesafesi mm 2000 Kızak üzerinde dönüş çapı mm 480 ANA SÜRÜCÜ 2 kademeli şanzımanlı AC tahrik Tahrik gücü %100ED kW 60 Maks. iş mili hızı min-1 2600 İş milindeki maks. tork %100 ED Nm 2748 KARŞI IŞ MILI TAHRIKI 2 kademeli şanzımanlı AC tahrik Tahrik gücü %100ED kW 40 Maks. iş mili hızı min-1 3300 İş milindeki maks. tork %100 ED Nm 1830 Kdodpfx Aeu Hl R Toagek ALET TAŞIYICILARI (tek takım taşıyıcı, tornalama-boralama-frezeleme ünitesi) AC sürücü, sürücü gücü %100 ED kW 25 İş mili hızı maks. dak-1 4000 Maks. İş milindeki maks. tork %100 ED Nm 300 X/Z düzlemine dik hareket (Y ekseni) mm 300[-125/+175] Freze milinin dönme açısı (B ekseni) ° -110/+90 DIN 69893 HSK-A63 uyarınca takımlar için mil kafası Ön yatakta mil çapı mm 100 BOYUTLAR Uzunluk (talaş konveyörlü maks. takım magazini) m 11*12 Genişlik/yükseklik m 4,2/3,5

Durumu: kullanılmış, kilometre: 117.608 km, güç: 92 kW (125,09 bg), ilk tescil: 09/1991, yakıt türü: dizel, toplam ağırlık: 7.490 kg, vites türü: mekanik, koltuk sayısı: 3, toplam uzunluk: 5.200 mm, toplam genişlik: 2.350 mm, toplam yükseklik: 3.370 mm, yükleme alanı uzunluğu: 2.350 mm, yükleme alanı genişliği: 2.100 mm, yükleme alanı yüksekliği: 450 mm, Üretim yılı: 1991, Donanım: her tahrikli, kaza yaptı, vinç, Unimog with tipper, winch, recovery supports, and crane U1250 - 427/11 * Unimog 1250 - 427/11 * First registration: 09/1991 * Hours according to meter: 6,587 * Mileage: 117,608 km (reading from odometer) * 5,958 cc with 92 kW (125 HP) * 16-speed manual transmission * Driver's cab with 3 seats * Tire size: 365/80 R 20, tread depth 14-16 mm * Wheelbase: 3,300 mm * Gross vehicle weight: 7,490 kg (reduced), curb weight: 6,960 kg, axle load: front 4,400 kg / rear 4,400 kg * ABS, radio, differential lock, power steering, wheel chocks * Dimensions (L x W x H): 5,500 x 2,265 x 3,400 mm * Crane: HIAB 050 with cable remote control * 3-way tipper, non-functional due to weight reduction, 230cm x 210cm x 45cm with steel side walls * 40mm jaw coupling * 2x rear recovery supports * Winch, front and rear hydraulics * Transmission damaged, drives only in low range * Dashboard damaged, rust damage in driver's cab (see photos) Ksdpfxsyq Ah Dj Aagsdk Further data and more pictures available upon request. This description does not constitute a binding offer and may contain errors, no guarantee for all information provided. Also visit our homepage at

Üretim yılı: 2015, Durumu: kullanılmış, Atık su nötralizasyonu Kapasite: 8 m³/saat Kullanım / Kontrol: Dokunmatik ekranlı kumanda panosu / WAGO Kjdpexbqr Defx Aagjdk Donanım: Nötralizasyon tankı (37 hl); Son kontrol tankı (4,5 hl); Alkali tankı; Asit tankı; Pompalar; Ölçüm, sensör ve kontrol teknolojisi; Kumanda panosu