Kullanılmış Berg & Schmid Velox 350 Va Mps satın al (11.933)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Uygunluk
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Makine üreticisi
- Üretici Z'den A'ya
- Makine üreticisi
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Uygunluk
- Uygunluk
Küçük ilan
Velen
2.612 km
Alüminyum daire testere
BERG & SCHMIDVELOX 350 VA MPS
Ara
Durumu: kullanılmış, Saw blade diameter: 350 mm
Cutting capacity at 90° (round): 120 mm
Cutting capacity at 90° (square): 110 mm
Cutting capacity at 90° (flat): 200 x 88 mm
Cutting capacity at 45° (round): 115 mm
Cutting capacity at 45° (square): 110 mm
Cutting capacity at 45° (rectangle): 150 x 80 mm
Total power requirement: 1.5 / 1.8 kW
Machine weight approx.: 0.59 t
Dimensions (L x W x H): 1.9 x 1.4 x 1.8 m
Hydropneumatic fully automatic
- Mitre cuts left/right
- Head tilt cuts up to 45° (swivel)
- Hydro-pneumatic saw head control
- Pneumatic double clamping device
Kjdpfxod Iinze Aagsdk
- Pneumatic vertical clamping device
- Electro-pneumatic material feed with material hold-down
- Vernier for fine length adjustment
- Integrated coolant spray system
- Chip extraction connection at saw blade guard
- Minimum remaining piece length in automatic mode: 210 mm
MPS control system:
- Storage of cut start/end positions
- Display of power consumption, piece count, cutting time, etc.
- Adjustable water cooling
- Cutting pressure regulator
Küçük ilan
Velen
2.612 km
Alüminyum daire testere
BERG & SCHMIDVELOX 350 VA MPS
Ara
Durumu: kullanılmış, Üretim yılı: 2009, Testere bıçağı çapı 350 mm
90 derecede kesim alanı: dairesel 120 mm
90 derecede kesim alanı: kare 110 mm
90 derecede kesim alanı: düz 200x88 mm
45 derecede kesim alanı: dairesel 115 mm
45 derecede kesim alanı: kare 110 mm
45 derecede kesim alanı: dikdörtgen 150x80 mm
Toplam güç gereksinimi 1,5/1,8 kW
Kdjdpsyrhu Sofx Aagjk
Makine ağırlığı yaklaşık 0,59 ton
Boyutlar U x G x Y 1,9 x 1,4 x 1,8 m
Hidropnömatik tam otomatik
· Sol/Sağ açılı kesim
· Kafa eğimli kesim 45°'ye kadar (dönüşlü) s.a./s.o.
· Pnömatik çift sıkıştırma tertibatı
· Pnömatik dikey sıkıştırma tertibatı
· Entegre soğutucu püskürtme sistemi
MPS kontrol sistemi:
· Kesim başlangıcı/bitişi kaydı
· Akım tüketimi, parça adedi, kesim süresi gösterimi
· Ayarlanabilir su soğutma
· Kesme basınç regülatörü
Küçük ilan
Velen
2.612 km
Alüminyum daire testere
BERG & SCHMIDVELOX 350 HA MPS
Ara
Durumu: kullanılmış, Saw blade diameter: 350 mm
Cutting range at 90°: round 120 mm
Cutting range at 90°: square 110 mm
Cutting range at 90°: flat 200 x 88 mm
Kjdpfsd Iin Ajx Aagedk
Cutting range at 45°: round 115 mm
Cutting range at 45°: square 110 mm
Cutting range at 45°: rectangle 150 x 80 mm
Total power requirement: 1.5/1.8 kW
Machine weight: approx. 0.27 t
Dimensions (L x W x H): 1.1 x 0.95 x 1.7 m
- Hydropneumatic semi-automatic
- Mitre cut left/right 45°
- Head tilt cuts up to 45° (shiftable)
- Ball bearing table
- Pneumatic double clamping device
- Machine base with mist spray unit
- Chip extraction nozzle on saw blade guard

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Königsbach-Stein
2.390 km
Hafif metal / alüminyum daire testere
Berg & SchmidVelox 350 VA
Ara
Durumu: kullanılmış, Üretim yılı: 1999, makine/araç numarası: 012563001, dönüş hızı (maks.): 3.600 dev/dak, giriş voltajı: 400 V, Alüminyum profillerin açılı (gönye) kesimi için
Üretim yılı: 1999
Peşin ödeme
Kdodpfjwl Uzyjx Aagsk
Nakliye maliyetleri dahil değildir
Küçük ilan
Aichwald
2.329 km
Tam otomatik alüminyum daire testere
Berg & SchmidVelox 350 VA
Ara
Durumu: mükemmel (kullanılmış), Üretim yılı: 2010, Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 580 kg, Hassas alüminyum daire testere makinesi
VELOX 350 VA-MPS tam otomatik hidropnömatik makine
Ø 350 mm'ye kadar testere bıçakları için, sol + sağ 45° gönye kesimleri ve 45° sol + sağa kadar eğimli kesimler.
Kesim aralığı:
- 90° 120mm yuvarlak, 105mm kare, 200x80mm düz
- 45°L 65mm yuvarlak, 60mm kare, 180x50mm düz
- 45°R115mm yuvarlak, 100mm kare, 150x80mm düz
Standart donanım:
- Çok işlevli ekrana sahip son teknoloji mikro işlemci kontrolü
- Aşağıdaki fonksiyonlara sahip güvenlik paketi:
Kdedpfx Aerpiu Deagjk
1. minimum giriş basıncı izleme
2. mengene izleme/malzeme sıkıştırma
- Testere kafasının hidro-pnömatik kontrolü
- Pnömatik çift sıkıştırma cihazı
- Pnömatik dikey sıkıştırma cihazı
- Elektro-pnömatik malzeme besleme ünitesi
- İnce uzunluk ayarı için Nonius
- Entegre soğutma sıvısı püskürtme cihazı
- Talaş çıkarma sistemi için bağlantı parçası
Hız 3600 min-1
Küçük ilan
Velen
2.612 km
Alüminyum daire testere
BERG & SCHMIDVELOX 350 VA CNC
Ara
Durumu: kullanılmış, Testere bıçağı çapı: 350 mm
Ksdpfx Aaod Iinyogjdk
90° kesim aralığı: yuvarlak 120 mm
90° kesim aralığı: kare 110 mm
90° kesim aralığı: düz 200x88 mm
45° kesim aralığı: yuvarlak 115 mm
45° kesim aralığı: kare 110 mm
45° kesim aralığı: dikdörtgen 150x80 mm
Toplam güç gereksinimi: 1,5/1,8 kW
Makine ağırlığı: yaklaşık 0,59 t
Boyutlar (U x G x Y): 1,1 x 0,95 x 1,7 m
Yeni makine için özel fiyat dahil:
- Starter Kit 2
- Mikro püskürtme ünitesi
Teşhirimizde gösterime hazır!!
Rulolu konveyör isteğe bağlı!!
Hidropnömatik tam otomatik
· Sol/Sağ gönye kesim
· Testere kafası 45°'ye kadar açılı kesim (şifter) sağ/sol
· Pnömatik dikey sıkıştırma düzeni
· Testere bıçağından önce ve sonra çapaksız kesim için mengeneler
· Malzeme baskı silindiri
· Entegre soğutucu sıvı püskürtme ünitesi
· Testere kapağında talaş emiş bağlantısı
· Tek adımlı besleme 530 mm
· Parça uzunluğu min. 4 mm maks. 9.999 mm
Profil kesimlerinde B & S Coolmatic Plus kullanımı zorunludur.
CNC Kontrol:
· 90'dan fazla kesim programı için buton ve uzunluk, adet ve açıya göre 99 alt program
· Bilyalı vidalı mil ile 2.000 mm otomatik besleme ünitesi
Otomatik uzunluk telafili artan besleme.
Parça uzunlukları 25 – 9.999 mm arası ayarlanabilir.
· Testere çerçevesi ve sıkıştırma mekanizmaları için tam hidrolik kontrol
· 3 farklı malzeme besleme hızı seçilebiliyor
· Kolay veri girişi ile tüm iş akışının görselleştirilmesi
Küçük ilan
Almanya
2.357 km
-Otomatik - yatay şerit testere
BERG & SCHMIDGBS 255 VA-I MPS
Ara
Durumu: yeni, Cutting capacity at 90 degrees: round 255 mm
Cutting capacity at 90 degrees: square 240 mm
Cutting capacity at 90 degrees: rectangular 300 x 180 mm
Saw blade length: 2,765 x 27 x 0.9 mm
Table height: 870 mm
Blade speed: 18 - 110 m/min
Total power requirement: 1.5/1.8 kW
Machine weight: approx. 0.63 t
Space required: approx. 1.8 x 1.85 x 1.85 m
Mitre band saw, fully automatic GBS 250 Super VA-I MPS
• Mitre left 45° automatic operation
• Mitre left 60° semi-automatic operation (cuts without programming)
• Shock-proof and ergonomic control panel with oil-resistant EPDM cover
a.
• Material height sensor c. (automatic cut start detection)
• Frame and gearbox made from a single casting, very quiet and low-vibration cutting
• Removable chip tray (disinfectable)
• Easy top access to saw, material, and feed unit
• Foldable safety cover
• Fine adjustment for feed
• Semi-automatic cutting!
Automatic sawing with microprocessor control
Adjustable for 2 program levels
Semi-automatic operation
Fully automatic operation
Keded Iip Aspfx Aagodk
Start after entering desired quantity and length: material positioning, cutting, and piece counting until program completion
• MPS control for input of required quantity of feed cycles
• All key machine data is displayed on the LED display during the cutting process (current consumption, cutting time, quantity)
• Input data is stored in RAM memory
• The self-diagnostic circuit automatically displays any irregularities as error messages and monitors the entire process
• Feed unit is mounted on a floating bearing
• Length adjustment via handwheel and vernier with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm or, via reversing automatic, repeatable 1 – 29 times; remnant piece length 210 mm
Küçük ilan
Velen
2.612 km
Alüminyum daire testere
BERG & SCHMIDVELOX 350 PN
Ara
Durumu: yeni, Saw blade diameter: 350 mm
Cutting capacity at 90 degrees (round): 120 mm
Cutting capacity at 90 degrees (square): 110 mm
Cutting capacity at 90 degrees (flat): 200 x 88 mm
Cutting capacity at 45 degrees (round): 115 mm
Cutting capacity at 45 degrees (square): 110 mm
Cutting capacity at 45 degrees (rectangular): 150 x 80 mm
Total connected load: 1.5/1.8 kW
Machine weight approx. 0.22 t
Kdjdpfx Ajd Iin Dsagsk
Dimensions (L x W x H): 0.7 x 0.9 x 1.9 m
ATTENTION: SPECIAL OFFER!!!
- Mitre cutting left/right up to 45°
- Head tilt cuts up to 45° (compound mitre)
- Pneumatic double quick-release clamping device
Clamping jaws close when lowered
- Ball-bearing table
- Machine base
- High-torque and powerful
- High-quality workmanship
Küçük ilan
Velen
2.612 km
Soğuk dairesel testere - otomatik
BERG & SCHMIDVKS 370 VA MPS
Ara
Durumu: yeni, Saw blade diameter: 370 mm
Kedpfx Aasd Iin Hjgedk
Cutting capacity at 90 degrees: round 120 mm
Cutting capacity at 90 degrees: square 100 mm
Cutting capacity at 90 degrees: rectangle 180x100 mm
Working height: 925 mm
Saw blade speed: 15 - 70 rpm
Total power requirement: 1.8/2.2 kW
Machine weight approx. 0.71 t
Required space approx. 1.9 x 1.45 x 2.1 m
SPECIAL PROMOTIONAL PRICE!!!
High-performance vertical circular saw, hydro-pneumatic fully automatic. (20192)
- Mitre cuts left 60° and right 45°
- Hydro-pneumatic control of the saw unit
- Electro-pneumatic material feed unit
- Smooth-running, high-performance worm gear drive with large gear ratio, integrated in a robust cast housing for optimal cutting results
- Vise with double clamping arm for minimal burr, plus quick side shift for mitre adjustment
- Precision prismatic guide for the gear head, laterally adjustable
- Extra stable base frame with built-in automatic cooling system
- Large chip drawer
- Chip removal brush integrated in the saw blade guard
MPS Control:
- Storage of cut start/end positions
- Display of power consumption, part count, cutting time, etc.
- Adjustable water cooling
- Cutting pressure regulator
IMPORTANT: Price does not include saw blade!!! (Saw blade price: EUR 204,-)
Küçük ilan
Wiefelstede
2.603 km
Alüminyum daire testere
Berg & SchmidtVelox 350
Ara
Durumu: iyi (kullanılmış), Alüminyum giyotin testere, Alüminyum daire testere, Alüminyum yarı otomatik daire testere, giyotin testere, cam çıta testeresi, metal giyotin testere, giyotin ve açılı kesim testere, alüminyum-metal daire testere, hafif metal daire testere
-Üretici: Berg & Schmidt, masif alt şasili Alüminyum-Metal Daire Testere Velox 350
-Testere bıçağı: Ø 350 mm / 1400/2800 d/d
-Kesme yüksekliği: 100 mm
-Kesme genişliği: 170 mm
Kjdpfsr A H R Tsx Aagsdk
-Çift açılı kesim: 45°
-Tahrik: 1,3 / 1,7 kW
-Çift sıkıştırma tertibatı: pnömatik
-Ölçüler: 890/600/H1670 mm
-Ağırlık: 198 kg
Küçük ilan
Aach
2.336 km
Soğuk testere
BERG & SCHMIDSBS 300 VA-1/CNC
Ara
Durumu: yenilenmiş (kullanılmış), Üretim yılı: 2019, Çift Kollu Yüksek Performanslı Şerit Testere Otomatı
BERG & SCHMID SBS 300 VA-1/CNC
Üretim yılı: 2019
Kdedsyw H Enepfx Aagok
Yuvarlak kesim çapı: 300 mm
Kare kesim çapı: 300 mm
Yassı kesim boyutları: 300 mm x 260 mm
Şerit hızı: 20 – 100 m/dak
Modern SNC 20 kontrol sistemi
Frekans kontrollü testere tahriki
Piktogramlı kumanda düğmeleri
Tahrikli talaş fırçası
Şerit gerilimi hidrolik
Sıkma basıncı ayarı
İş lambası
Talaş konveyörü
2 m makaralı konveyör
Küçük ilan
Ahaus
2.615 km
şerit testere
BERG & SCHMID (IMET)BS 350 AFI-E + ESC
Ara
Durumu: işlem için hazır (kullanılmış), Üretim yılı: 1998, Kesme çapı 305 mm
90 derecede kesme aralığı: düz 350 x 200 mm
45 derecede kesme aralığı: yuvarlak 250 mm
45 derecede kesme aralığı: düz 230 x 200 mm
60 derecede kesme aralığı: yuvarlak 175 mm
60 derecede kesme aralığı: düz 170 x 100 mm
Bant hızı 18 - 110 m/dak
Maksimum mengeneli genişlik 350 mm
Şerit testere ebatları 3370 x 27 x 0.9 mm
Motor gücü 1,5 / 1,8 kW
Ksdpfsyy A Hyjx Aagsdk
Makine ağırlığı yaklaşık 880 kg
Boyutlar U-G-Y 1700 x 2200 x 2000 mm
Donanım:
- sağlam, elektro-hidrolik tam otomatik şerit testere
- kullanıcı dostu kontrol paneli
- 45°'ye kadar sola açılı kesim
. otomatik çalışmada mümkündür
- 60°'ye kadar açılı kesim
. sadece yarı otomatikte mümkündür
- Otomatik basınç kapamalı
. hidrolik ünite (boşta)
- Sabit makine gövdesi
* büyük talaş çekmecesi ve otomatik soğutma ile
- Sonsuz şerit testere hızı ayarı (ESC)
- Hareketli talaş fırçası
- Minimum artık parça 80 mm
- Kullanım kılavuzu (PDF)
Küçük ilan
Almanya
2.357 km
Otomatik şerit testere - yatay
BERG & SCHMIDSBS 300 VA-I / CNC
Ara
Durumu: yeni, Cutting diameter round: 300 mm
Cutting diameter square: 300 mm
Cutting diameter flat: 300 x 260 mm
Saw blade length: 3920 x 34 x 1.1 mm
Table height: 780 mm
Band speed: 20 – 100 m/min
Total power requirement: 3.7 kW
Machine weight: approx. 1.65 t
Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m
Unused exhibition machine!!!!
2-column high-performance automatic bandsaws of the SBS series
• Modern SNC 20 control unit for CNC version
• Frequency-controlled saw drive
• Work light
• Driven chip brush
• Hydraulic blade tensioning
• Adjustable clamping pressure
• Double vice (before and after the blade)
• Creep mode for positioning
• Bundle clamping prepared for electric and hydraulic operation
Kjdpfx Asxfwbteagodk
• Chip conveyor
The SNC 20 control unit allows convenient and straightforward entry of up to 20 different cutting operations (length and quantity). When entering the required dimensions, the system automatically calculates the cutting waste and the number of feed strokes. In addition, the error code display system enables fast troubleshooting.
Including blade tracking (EUR 1,800)
Küçük ilan
Almanya
2.357 km
-Otomatik - yatay şerit testere
BERG & SCHMIDSBS 300 VA-I / CNC
Ara
Durumu: yeni, Cutting diameter round: 300 mm
Cutting diameter square: 300 mm
Cutting diameter flat: 300 x 260 mm
Saw blade length: 3920 x 34 x 1.1 mm
Table height: 780 mm
Band speed: 20 - 100 m/min
Total power requirement: 3.7 kW
Machine weight: approx. 1.65 t
Kedpfxjfb Nbfj Aagsdk
Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m
SPECIAL OFFER PRICE!!!!
2-column high-performance bandsaw machines of the SBS series
The SBS series impresses with advanced technology, high quality, durability, and an unrivaled comprehensive standard equipment package.
• Modern SNC 20 control for CNC models
• Frequency-controlled saw drive
• Operator buttons with pictograms
• Work light
• Powered chip brush
• Hydraulic blade tensioning
• Clamping pressure regulation
• Double vice (in front of and behind the blade)
• Creep mode for positioning
• Electrically and hydraulically prepared bundle clamping
• Chip conveyor
The SNC 20 control system allows convenient and straightforward input of up to 20 different sawing tasks (length and quantity). When the target size is entered, the controller automatically calculates the cutting waste and the number of feed strokes. In addition, the error code display system enables fast diagnosis and troubleshooting.
Küçük ilan
Almanya
2.357 km
Şerit testere - yatay
BERG & SCHMIDDGS 350/450 HA-I Easy 34
Ara
Durumu: yeni, Cutting capacity at 90°: round 350 mm
Cutting capacity at 90°: square 330 mm
Cutting capacity at 90°: rectangular 450 x 320 mm
Saw blade length: 4250 x 34 x 1.1 mm
Blade speed: 40 + 80 m/min
Table height: 845 mm
Saw blade width: 34 mm
Total power requirement: 2.2 kW
Machine weight approx. 0.985 t
Space requirement approx. 1.4 x 2.0 x 2.2 m
Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I
· Mitre cuts left and right up to 60° without machine conversion
· 34 mm saw blade width
· Large, ball-bearing mounted rotary material support table
· Saw blade guides positioned via extra-wide linear guideway
· Heavy-duty, robust gearbox
· Large-area clamping plates
· Infeed and outfeed rollers
· Removable chip tray (for cleaning/disinfection)
· Freestanding, safe, and ergonomic control panel
· Storage for blades and consumables
· Cutting pressure regulator, feed rate controller
· Fully hydraulic vise
· Quick clamping (front loading)
· Material height sensor (automatic cut start recognition)
Semi-automatic operation:
1. Clamp material
2. Start saw
3. Rapid descent to material edge or direct cutting for serial cuts
4. Switch off saw blade
5. Raise frame just above material
6. Open vise
Ksdpefgyicjfx Aagsdk
Optimal, material-independent cutting results via fine adjustment of the saw frame using:
* Pressure control valve (cutting pressure/power)
* Feed rate control valve (speed)
* Clearly labeled switch with pictogram, easy and intuitive operation
Küçük ilan
Almanya
2.357 km
-Otomatik - yatay şerit testere
BERG & SCHMIDSBS 330 VA-I / CNC
Ara
Durumu: yeni, Cutting diameter round: 330 mm
Cutting diameter square: 330 mm
Cutting diameter flat: 400 x 330 mm
Saw band length: 4570 x 34 x 1.1 mm
Table height: 800 mm
Band speed: 20 - 100 m/min
Total power requirement: 3.7 kW
Machine weight: approx. 2.35 t
Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m
SPECIAL OFFER PRICE!!!!
Kdedpfjfb Nbgsx Aagok
2-Column High-Performance Bandsaw Machines of the SBS Series
The SBS series stands out due to its advanced technology, high quality, durability, and an unrivalled comprehensive standard equipment package.
• Modern SNC 20 control unit for CNC versions
• Frequency-controlled saw drive
• Operator buttons with pictograms
• Work light
• Powered chip brush
• Hydraulic band tensioning
• Adjustable clamping pressure
• Double vice (before and after the band)
• Creep speed for positioning
• Bundle clamping electrically and hydraulically prepared
• Chip conveyor
The SNC 20 control allows for easy and straightforward input of up to 20 different sawing jobs (length and quantity). When the required measurement is entered, the control automatically calculates the cutting allowance and the number of feed strokes. Additionally, the error code display system offers fast fault analysis for troubleshooting.
Küçük ilan
Almanya
2.357 km
-Otomatik - yatay şerit testere
BERG & SCHMIDSBS 460 VA-I / CNC
Ara
Durumu: yeni, Cutting diameter round: 460 mm
Cutting diameter square: 460 mm
Cutting diameter flat: 460 x 460 mm
Saw blade length: 5450 x 41 x 1.3 mm
Table height: 800 mm
Band speed: 20 - 100 m/min
Total power requirement: 5.5 kW
Machine weight: approx. 3.2 t
Dimensions (L x W x H): 2,675 x 2.15 x 2.05 m
SPECIAL OFFER PRICE!!!!
2-Column High-Performance Bandsaw Automats of the SBS Series
The SBS series impresses with advanced technology, high quality, durability,
and an unrivaled extensive standard equipment package.
• Modern SNC 20 control system for CNC versions
Kdsdpfx Aaofg E Hvsgek
• Frequency-controlled saw drive
• Control buttons with pictograms
• Work light
• Powered chip brush
• Hydraulic blade tensioning
• Clamping pressure regulation
• Double vice (before and after the blade)
• Creep speed for positioning
• Bundle clamping electrically and hydraulically pre-installed
• Chip conveyor
The SNC 20 control system allows convenient and straightforward input of
up to 20 different sawing assignments (length and quantity). When the
target size is entered, the control system automatically calculates
the kerf loss and the number of feed cycles. The error code display system also enables quick troubleshooting and error analysis.
Küçük ilan
Almanya
2.357 km
Otomatik şerit testere - yatay
BERG & SCHMIDGBS 255 VA-I CNC
Ara
Durumu: yeni, Cutting capacity at 90 degrees, round: 255 mm
Cutting capacity at 90 degrees, square: 240 mm
Cutting capacity at 90 degrees, rectangle: 300 x 180 mm
Saw band length: 2,765 x 27 x 0.9 mm
Table height: 870 mm
Band speed: 18 - 110 m/min
Control: CNC
Kdodpfx Aed Iipzoagok
Total power requirement: 1.5/1.8 kW
Machine weight: approx. 0.63 t
Space requirements: approx. 1.8 x 1.85 x 1.85 m
Mitre band saw, fully automatic, GBS 255 Super VA-I CNC
• Left mitre 45° automatic operation
• Left mitre 60° semi-automatic operation (cuts without programming)
• Material height sensor (automatic cut start detection)
• One-piece cast frame and gearbox, ensuring very quiet and low-vibration cutting
• Removable chip tray (for cleaning/desinfection)
• Impact-resistant and ergonomic control panel with oil-resistant EPDM cover
• High-performance positioning via incremental encoder (CNC)
• Top accessibility to saw, material, and feed unit
• Foldable safety cover
• Fine feed adjustment
• Semi-automatic cut
• CNC control to optimize working processes:
Input options for various parameters such as batch quantities and material lengths, automatic kerf calculation
• CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g., one sawing program with multiple cut lengths
• Automatic feeding unit (CNC) via ball screw spindle with incremental advance and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, minimum leftover length 170 mm.
Küçük ilan
Almanya
2.357 km
-Otomatik - yatay şerit testere
BERG & SCHMIDGBS 310/400 VA-I CNC
Ara
Durumu: yeni, Cutting range at 90 degrees: round 310 mm
Cutting range at 90 degrees: square 280 mm
Cutting range at 90 degrees: rectangular 400x250 mm
Saw blade length 4020x34x1.1 mm
Blade speed 18 - 100 m/min
Table height 890 mm
Total power requirement 2.2 kW
Machine weight approx. 0.99 t
Space requirement approx. 1.85 x 2.2 x 2.0 m
Mitre band saw, fully automatic, GBS 310/400 VA-I CNC
• Left mitre 45°, automatic operation
• Left mitre 60°, semi-automatic operation (cuts without programming)
• Material height probe (automatic cut start detection)
• Frame and gearbox made from a single casting, very quiet and low-vibration cutting
• Removable chip tray (for cleaning/disinfection)
• Shockproof and ergonomic control panel with oil-resistant EPDM cover
• Optimal access to saw, material and feed unit
• Foldable safety cover
• Fine adjustment of feed
• Semi-automatic cutting!
• CNC control to optimize workflows
Input options for various parameters such as quantities and material lengths,
automatic calculation of the kerf
• CNC control for 10 different sawing programs with 99 sub-programs for
various lengths and quantities, e.g. one sawing program with various
different cut lengths
• Automatic feed unit (CNC) via ball screw incremental feed
Kdedsd Iiprjpfx Aagek
with automatic length compensation. Adjustable for cut lengths from
2 mm to 9,999 mm, remnant length 170 mm.
Küçük ilan
Almanya
2.357 km
Otomatik şerit testere - yatay
BERG & SCHMIDGBS 305 VA-I CNC
Ara
Durumu: yeni, 90 derecede kesme alanı: yuvarlak 305 mm
90 derecede kesme alanı: kare 260 mm
90 derecede kesme alanı: dikdörtgen 350 x 200
Testere bıçağı uzunluğu 3375 x 27 x 0,9 mm
Bıçak hızı 18 - 100 m/dak
Masa yüksekliği 880 mm
Toplam güç gereksinimi 1,5/1,8 kW
Makine ağırlığı yaklaşık 0,84 t
Alan gereksinimi yaklaşık 1,85 x 1,9 x 2,0 m
Tam otomatik gönye şerit testere
• Sol gönye 45°, otomatik çalışma
• Sol gönye 60° yarı otomatik çalışma (programlamadan kesimler)
• Malzeme yükseklik sensörü (otomatik kesim başlangıcı algılama)
• Tek parçadan yapılmış çerçeve ve dişli, çok sessiz kesim ve çok düşük titreşim
• Çıkarılabilir talaş tepsisi (dezenfeksiyon)
• Yağa dayanıklı EPDM kapaklı darbeye dayanıklı ve ergonomik kontrol paneli
• Testere, malzeme ve besleme ünitesine üstten erişim
Kdsdeupw R Aopfx Aagjk
• Katlanır emniyet kapağı
• Hassas besleme ayarı
• Yarı otomatik kesim!
• CNC kontrolü ile iş akışlarını optimize edin
Parça numaraları ve malzeme uzunlukları gibi çeşitli parametreleri girme seçeneği,
kesim kanalının otomatik hesaplanması
• Farklı uzunluklar ve parça numaraları için 99 alt programlı 10 farklı testere programı için CNC kontrolü, örn. çeşitli
kesim uzunluklarına sahip 1 kesme programı
• Otomatik uzunluk telafisi olan bilyalı vidalı artımlı besleme yoluyla otomatik besleme ünitesi (CNC). 2 mm'den 9.999 mm'ye kadar kesme uzunlukları için ayarlanabilir, kalan uzunluk 170 mm. Şunları içerir:
- Mikro püskürtme cihazı
- Dengeleme elemanları
Küçük ilan
Velen
2.612 km
Soğuk daire testere
BERG & SCHMIDVKS 370 HA MPS
Ara
Durumu: yeni, Saw blade diameter: 370 mm
Cutting capacity at 90 degrees (round): 120 mm
Cutting capacity at 90 degrees (square): 100 mm
Cutting capacity at 90 degrees (rectangular): 180 x 100 mm
Working height: 925 mm
Saw blade speeds: 15+30 or 30+60 rpm
Total power requirement: 1.8/2.2 kW
Machine weight: approx. 0.44 t
Space requirements: approx. 0.8 x 1.1 x 2.1 m
SPECIAL OFFER PRICE!!!
High-performance vertical circular saw, hydropneumatic semi-automatic. (20185/20188)
· Miter left 60° / right 45°
· Vise with double clamping arm
· Sturdy prismatic saw head guide, dovetail guide adjustable
· Chip brush
· Automatic coolant system
· Metal tension wheel for high torque transmission
· Heavy-duty cast table
Semi-automatic operation:
1. Clamp material
2. Start saw
3. Rapid descent to material start or for serial cuts, cut immediately
4. Saw blade off
5. Raise frame slightly above the material
6. Open vise
MPS control system:
Kjdpfx Asd Iin Ieagedk
· Memory for cut start/end positions
· Display for current draw, piece count, cutting time, etc.
· Adjustable water cooling
· Cutting pressure regulator
ATTENTION: Price does not include saw blade! (Saw blade price: EUR 204)
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Velen
2.612 km
Soğuk dairesel testere - otomatik
BERG & SCHMIDVKS 370 VA CNC
Ara
Durumu: yeni, Saw blade diameter: 370 mm
Cutting capacity at 90 degrees (round): 120 mm
Cutting capacity at 90 degrees (square): 100 mm
Cutting capacity at 90 degrees (rectangular): 180 x 100 mm
Working height: 925 mm
Saw blade speeds: 17 – 70 rpm
Total power requirement: 3.0 kW
Space requirement approx. 1.9 x 1.45 x 2.1 m
SPECIAL OFFER PRICE!!!
Ksdpfx Ajd Iin Eoagodk
High-performance vertical circular saw, fully automatic with hydropneumatic control. (20195)
· Mitre cut, left 60° + right 45°
· Hydro-pneumatic control of the saw unit
· Electro-pneumatic material feed unit
· Smooth-running, high-performance worm drive with high gear ratio, integrated into a stable cast housing to achieve optimal cutting results
· Vise with double clamping arm for burr-free cutting; also with lateral quick-shift for mitre changes
· Precision prism guide for the gearbox head, laterally adjustable
· Especially robust base frame with built-in automatic coolant system
· Large chip drawer
· Chip removal brush inside the saw blade guard
CNC control system:
· Operator panel for more than 90 cutting programs with 99 subprograms for length, quantity, and angle
· Automatic feed unit, 2,000 mm travel via ball screw spindle
Incremental feed with automatic length compensation.
Adjustable for cut lengths from 25 – 9,999 mm.
· Fully hydraulic control of saw frame and clamping devices
· Preselection of 3 different material feed speeds
· Full workflow visualization with simple data entry
NOTE: Price does not include saw blade!!! (Saw blade price: €204)
Küçük ilan
Almanya
2.357 km
Dairesel Metal Testeresi
BERG & SCHMIDVKS 370 VA
Ara
Üretim yılı: 2019, Durumu: işlem için hazır (kullanılmış), Ek Donanım
Starter Kit 1, 2 adet dairesel testere bıçağı ve 10 litre soğutma sıvısı konsantresinden oluşur.
Dengeleme elemanı (1 set = 4 adet), M 12x100 saplama cıvatalı.
Besleme tarafı – sol.
Besleme makaralı konveyör URB 290, uzunluk 3000 mm.
Kdjdpsx Nr Sqsfx Aagjk
URB 290/400 için besleme adaptörü.
Çıkış makaralı konveyör URB 290, uzunluk 2000 mm.
URB 290/400 için çıkarma adaptörü.
Makine için bağlantı parçası, sağ tarafa montajlı.
LM 55 M/man. uzunluk durdurucu, ölçüm uzunluğu 2000 mm.
BERG & SCHMID VKS 370 VA 2019 yılında üretilmiştir. CNC frekans dönüştürücülü, tam otomatik hidropnömatik dikey dairesel testere özelliği bulunur. Makinede malzeme akışını optimize eden, besleme tarafında (3 m) ve çıkış tarafında (2 m) makaralı konveyörler mevcuttur. Ayrıca Starter Kit 1, dairesel testere bıçakları ve soğutma sıvısı konsantresi ile birlikte gelir. Bu BERG & SCHMID VKS 370 VA Dairesel Metal Testereyi satın alma fırsatını değerlendirin. Daha fazla bilgi için bizimle iletişime geçin.
Uygulama Tipleri
Kesme
Küçük ilan
Hessisch Lichtenau
2.405 km
Gönye soğuk daire testere, kesme testeresi, HSS bıçaklı metal kesme testeresi, gönye testeresi
BERG & SCHMIDMKS 350
Ara
Durumu: kullanılmış, Gönye daire testere BERG & SCHMID tip MKS 350
Yapım yılı yaklaşık 1980
90° yuvarlak Ø 110 mm'de testere aralığı
90° dikdörtgen için testere aralığı 160 x 90 mm
90° kare 95 x 95 mm için testere aralığı
45° yuvarlak Ø 95 mm'de testere alanı
45° dikdörtgen için testere alanı 120 x 90 mm
45° karede 80 x 80 mm kesme alanı
Testere bıçağı çapı maks. 350 mm
Testere bıçağı hızı 28 ve 56 rpm
Motor gücü yaklaşık 1,8 / 2,5 kW kutup değiştirme
Şebeke bağlantısı 380 Volt, 50 Hz
- Elektrikle değiştirilebilen 2 hıza sahip motor
- 45°'ye kadar kademesiz değişken gönye hızlı ayarı
- Hızlı açılan eksantrik kollu malzeme mengenesi
- Elektrikli soğutma sıvısı pompalı soğutma sıvısı cihazı
Kdjdsquzd Ropfx Aagok
- Malzeme durdurma 350 mm
- Ø 335 mm entegre testere bıçağı
Alan gereksinimi U x G x Y 1250 x 600 x 1200 mm
Ağırlık 240 kg
iyi durumda
Küçük ilan
Almanya
2.249 km
Soğuk daire testere - Dikey - Yarı otomatik
BERG & SCHMIDVKS 350 HA
Ara
Durumu: kullanılmış, Teknik detaylar:
Testere bıçağı çapı: 350 mm
90 derecede kesme aralığı: yuvarlak: 110 mm
90 derecede kesme aralığı: kare: 85 x 85 mm
90 derecede kesme aralığı: düz: 180 x 85 mm
45 derecede kesme aralığı: yuvarlak: sol/sağ: 105 / 110 mm
45 derecede kesme aralığı: kare: sol/sağ: 85 x 85 / 85x85 mm
45 derecede kesme aralığı: düz: sol/sağ: 130 x 85 / 130 x 85 mm
Testere bıçağı deliği: 40 mm
Hız aralığı - kademesiz değişken: 9 / 18 / 36 / 74 / 4step rpm
Döner tabla: Ø 400 mm/dak
Masa döndürme +/-: 60° sağa ve 45° sola °
Basınçlı hava bağlantısı: 7 bar
Toplam güç gereksinimi: yaklaşık 2,2 kW
Makine ağırlığı yaklaşık: 430 kg
Makine boyutları: G: 0,7 x D: 1,01 x Y: 2,1 m
Kjdpfx Aaeu Nilyogsdk
Daire testere, profiller ve katı malzemeler üzerinde 45° içe veya 60° sağa doğru gönyeli kesimlerin yapılabildiği elektro-hidro-pnömatik yarı otomatik bir daire testeredir.
Dikey daire testere
Sağlam, ağır döküm yapı
maks. mengene açıklığı 180mm
kesim sayacı
testere kafasının dikey hareketi: 200mm
Mengene açma genişliği maks. 180mm (çene boyutu G:220 x Y:70mm)
Kontrol paneli üzerinden çalıştırma
*
Sizin için aramayı kolaylaştırıyoruz: "berg & schmid velox 350 va mps"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay



































































































































































