Kullanılmış Fliegl Dhks-420 Thermo Basic Plus satın al (10.020)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Triptis
2.248 km
Damperli yarı römork
FLIEGLDHKS-420 Thermo Basic plus
Çağrı
Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT34202036640, boş ağırlık: 6.213 kg, azami yük ağırlığı: 35.787 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, bir sonraki muayene (TÜV): 05/2026, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.600 mm, yükleme alanı hacmi: 27 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.310 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, lastik durumu: 80 yüzde, renk: sarı, Üretim yılı: 2025, The images are archive photos; the vehicle may still be in use!
Fifth Wheel Height approx.: 1200 mm
Chassis - Tipper Semi-Trailer
Basic lightweight design, fifth wheel plate with replaceable 2" kingpin, patented curved front section. Foldable underrun protection with spring assistance for easier operation. Integrated mudguard bracket with stone-repellent surface.
Axles & Suspension
SAF disc brake axles with 430 mm disc diameter. Axles/chassis laser measured, reducing tire wear and fuel consumption. Air suspension. First axle is a self-lifting axle with forced lowering and starting aid, activated by pressing the brake three times (starting aid operational with axle overload up to 30% and max. 25 km/h).
Braking System
24 Volt EBS electronic braking system with front EBS socket (without connecting cable), external test port for brake cylinder pressure at EBS module, with lift & lower valve. Paver brake, electric control from the truck without truck installation. Automatic tipper lowering with shut-off valve.
TPMS (Tire Pressure Monitoring System) according to ECE R 141, display in tractor unit via EBS (truck must be pre-equipped, only monitors standard tires). Axle load detection via EBS CAN-bus signal, display in cab (truck must be pre-equipped, no installation required).
Wheels and Tires
385/65 R22.5 steel rims
Electrics
Side yellow LED lights linked to indicators (flashing side marker lights). Two front white position lights in LED, two rear white/red lane marker lights in LED. Side-mounted LED work lamps on both sides, two additional LED work lights recessed in rear section.
Kledsyylapspfx Adzot
Hydraulics
Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection). Operation hydraulically via truck PTO.
Bodies
Steel round body with "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mounting. Interior access at the front wall. Greenline – conical and aerodynamic body shape. "Membrane" tailgate – hydraulic rear flap with large upward opening, approx. 2200 mm clearance height. Side walls continuous 5 mm thick; floor continuous 8 mm thick. Insulated body version – Fliegl Asphalt Profi Thermo, front, side, bottom, and rear insulated with Fliegl Isotherm.
"Flip Top sliding cover" with automatic rear closure (folding framework). Cover is pre-assembled forward, electrically operated with 7-pin plug at front (charging socket) without connecting cable, no truck installation. Operable on the trailer and via remote control.
Operating Notes
For transports of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion from aggressive materials. The stated gross weight is technically possible but may not be achievable depending on cargo while observing legal axle, support, and fifth-wheel loads (poor driving and tracking may occur due to incorrect weight distribution).
Paintwork
Frame – DB 7350 Nova Grey "10 years corrosion warranty"
Support legs – Black coated
Body – RAL 1007 Narcissus Yellow
Tarpaulin – RAL 7038 Agate Grey
Küçük ilan
Triptis
2.248 km
Damperli yarı römork
FLIEGLDHKS 390 Thermo 27 m³
Çağrı
Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902035294, boş ağırlık: 5.663 kg, azami yük ağırlığı: 29.337 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2024, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 3.310 mm, yükleme alanı hacmi: 27 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.310 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: mavi, Üretim yılı: 2024, The images are archive photos // Multiple units available! // The vehicle is still incoming!
Chassis, Tipping Semi-Trailer
Basic lightweight design, fifth wheel plate fitted with replaceable 2” kingpin
Curved front wall
Central telescopic support, uncoupling when loaded not possible
Folding underrun protection
Half-shell mudguards
Tarpaulin support bar with bracket
Tow hook at rear
Axles & Suspension
BPW disc brake axles with 430 mm disc diameter
Axles/chassis laser-aligned
1st axle as automatic lift axle, additionally controllable electrically from the truck, including forced lowering and starting aid, no truck installation required
Braking System
2-line compressed air braking system
Spring-loaded parking brake
2 anti-mixing coupling heads at the front, no connecting line
24V EBS electronic braking system with EBS socket at the front, without connecting cable
Automatic tipping lowering with shut-off valve
Trailer info module to display vehicle data such as axle loads (not a calibrated scale), mileage, and diagnostic/system notifications
Axle load detection via EBS CAN bus signal
Wheels & Tyres
385/65 R22.5
Polished aluminium rims
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
Ksdpfx Aoyu Rlljdzslt
2 white LED position lights at the front
2 white/red lane position marker lights at the rear
2 x 7-pin and 1 x 15-pin anti-mixing sockets at the front
Hydraulics
High-pressure cylinder max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, without hose connection
Body/Bin
Steel round body in “Stone Master Design” made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mounting
Internal access at the front wall
External shovel and broom holder at the front wall
Rear wall as pendulum tailgate, externally mounted with double hook locking. 2 clamping screws with T-handles at the bottom sides.
“Pendelrückwand” spacers can be hooked into the clamping screws
Side walls are 4 mm thick throughout, floor 4/5 mm thick, wear- and weight-optimized construction
Fliegl S.T.E.P. - swivel standing platform at front with folding access ladder for side entry in FR-left, only in conjunction with "Flip Top sliding roof"
Body in insulated version, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom, and rear with Fliegl Isotherm sheet cladding
“Flip Top Sliding Roof,” automatic rear closure as folding bow. Roof slides forward. Electrically operated roof with 7-pin socket (charging socket at the front without cable included, tractor socket loose, no truck installation, operation on trailer and via remote control)
7-pin coiled connection cable to the truck for the sliding roof. Truck must be equipped with socket
Operating Instructions
For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent damage and rusting by the material.
The specified total weight is technically possible; depending on the load, it may not be possible to reach the total weight while observing all permissible axle, support, and fifth wheel loads. Note: Not suitable for chemically aggressive media (e.g. acids, chlorine compounds, sulfur compounds, substitute fuels). Vehicles with tipping bodies are intended only for non-chemically aggressive cargo.
Paintwork
Frame: DB 7350 Novagrau
Support legs: galvanized
Body: RAL 5002 Ultramarine Blue
Roll tarp: RAL 5002 Ultramarine Blue
Küçük ilan
Triptis
2.248 km
Damperli yarı römork
FLIEGLDHKS 390 Thermo 27 m³
Çağrı
Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902035293, boş ağırlık: 5.663 kg, azami yük ağırlığı: 29.337 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2024, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.600 mm, yükleme alanı hacmi: 27 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.310 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", renk: mavi, römork freni: frenli römork, Üretim yılı: 2024, The images shown are archive photos // Multiple units available! // The vehicle is still inbound!
Chassis Semi-Tipper
Basic lightweight construction, fifth wheel plate with replaceable 2" kingpin,
Patented curved front panel
Central telescopic support leg, uncoupling while loaded is not possible; when uncoupled, the vehicle must be parked on a backward slope.
2 wheel chocks with holders
Foldable underrun protection
Underrun protection with spring assistance for easier operation
6 partial shell fenders
Klodeyux H Djpfx Adzot
Integrated fender bracket, stone-repellent surface
Splash guards behind last axle, asphalt version, attached with a hinge to the fender, includes upper fender mounting option, shortened fender
Tarpaulin bar with holder
2 towing hooks at the rear
Axles & Suspension
BPW disc brake axles with 430 mm disc diameter
"Axle/Chassis laser alignment" to reduce tire wear and fuel consumption
Air suspension
1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid, no truck installation required
"Hot-dip galvanized lift axle mechanism" with 10-year warranty against corrosion
Braking System
2-line air brake system
Color-coded line routing for easy service
Spring-actuated parking brake
2 error-proof coupling heads at the front, without connecting hose
24 Volt EBS (Electronic Braking System) with EBS socket at the front, without connection cable
Including lift & lower valve
Vehicle stability control system
Paver brake, electrically operable from the truck, no truck installation required
Automatic tipping height reduction with shut-off valve
Trailer Info Module for vehicle data display
Axle load detection via EBS CAN bus signal
Wheels and Tires
385/65 R22.5, brand at manufacturer’s discretion
Polished aluminum rims
Protective caps for wheel bolts
Electrics
24 Volt, multi-chamber tail lamps, side-mounted amber LED marker lights
2 white LED position lights at the front
2 white/red lane marker lights at the rear
2 × 7-pin and 1 × 15-pin error-proof sockets at the front, without connection cable
Side-mounted LED work lights on both sides
Additional integrated LED work lights recessed in the rear
Hydraulics
High-pressure cylinder max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, stationary section, nominal width 48 mm
Hydraulic operation via truck PTO
Body
Steel round body in “Stone Master Design” made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount.
Interior step on the front wall.
Shovel and broom holder on the front wall, outside
“Membrane” rear wall
Rear wall as pendulum flap, externally mounted with double hook locking. 2 clamping bolts with T-handle locks at the bottom sides.
“Distance holder for pendulum tailgate” can be hooked into the clamping bolts
Grain slider centrally positioned
Fliegl S.T.E.P. – foldable front safety platform with ascent ladder, for side entry FR-left
Body in insulated version, Fliegl Asphalt Profi Thermo, sheet metal cladding
“Flip Top sliding cover,” automatic tailgate as a folding bow. The cover extends forward. Electrically operated cover, with 7-pin socket (charging socket) at the front without connection cable, includes separate tractor unit socket, controls on the trailer and via remote control.
7-pin spiral connection cable to the truck for the sliding cover; corresponding socket must be present on the truck.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Triptis
2.248 km
Kipper
FlieglDHKS 390 - 25 m³ Asphaltprofi Thermo
Çağrı
Koşul: yeni, makine/araç numarası: 7383bc2b7f580f0cb319b52f7, boş ağırlık: 5.400 kg, azami yük ağırlığı: 33.600 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.960 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22.5, Further Information
Chassis Semi-Trailer Tipper
Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2" kingpin
Patented curved front bulkhead
Central telescopic landing leg, uncoupling when loaded not possible; when uncoupled, the vehicle must be positioned with a rearward incline.
Wheel chocks with holder
Foldable underrun protection
Half-shell mudguards
Integrated mudguard bracket with stone-repellent surface
Splash guards behind the last axle in asphalt specification, hinged to mudguard, with hook-in option at the top of the mudguard, shortened mudguard
Towing hook at rear
Axles & Suspension
SAF disc brake axles, 430 mm disc diameter
Laser-measured axles/chassis to reduce tire wear and fuel consumption
Axles in off-road version
Air suspension
First axle: automatic lift axle, including forced lowering and traction aid
Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty
Braking System
2-line compressed air braking system. Color-coded hoses for easy maintenance.
Spring-loaded parking brake
2 mistake-proof coupling heads at the front, without connecting line
EBS (Electronic Braking System) with EBS socket at the front, no connection cable
Attention: The trailer may only be towed by towing vehicles that ensure ABS function!
With raise & lower valve
Vehicle stability system
Wheels and Tires
385/65 R22.5
Steel rims, factory silver
"TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the tractor unit's display, via EBS, not installed on the truck (the truck must be equipped accordingly; only for standard tire set).
Electrics
24 Volt, multi-chamber lamps, yellow side LED lighting
Yellow side LED lighting linked to turn indicator, "flashing side marker lights"
2 white position lamps at the front
2 white/red lane marker lamps at the rear
2 x 7-pin mistake-proof sockets at the front, without connection cable
Hydraulics
High-pressure cylinder max. 250 bar, with HDK screw coupler, fixed part, NW 48 mm (without hose connection)
Hydraulic operation via PTO of the truck
Body
Klodpfx Adoi Rix Iezot
Steel round body in Stone Master design made from highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic system and access on the front wall.
Membrane rear wall
Rear wall as pendulum flap, externally mounted with double hook locking. 2 clamping screws with handwheels at the lower sides.
Continuous 4 mm thick side walls, floor 4/5 mm thick, wear- and weight-optimized construction.
Body in insulated version, Fliegl Asphalt Profi Thermo; front, side, bottom, and rear insulated with Fliegl Isotherm. BASIC tarpaulin cover, tarpaulin cladding
Standing platform with access, connection plate for air/electricity and brakes with large clearance for optimal operability.
Roll-up tarpaulin stored on right-hand side, central locking on left-hand side
Country of Registration / License Plates
Germany
Type approval according to EC 2007/46
Body strength according to EN 12642
24/7 service hotline
Manufacturer certificate for thermal vehicles according to RS 10 - 2013
Prepared for single-line license plate holder
Warning sign to ECE - 70
Paintwork
Frame: DB 7350 Nova Grey
"10-year anti-corrosion warranty"
Landing legs: galvanized
Body/Side tarpaulin: RAL as desired, single color
Roll-up tarpaulin: RAL 7035 light grey
Thermal insulation also available in BASICplus (sheet metal cladding) and Premium (stainless steel cladding)!
Küçük ilan
Roosendaal
2.760 km
Soğutulmuş/dondurulmuş konteynerler
THERMO KINGNEW 10FT REEFER / THERMOKING MAGNUM PLUS
Çağrı
Koşul: yeni, Üretim yılı: 2025, renk: beyaz, Yeni ve kullanılmamış 10 ft soğutucu konteyner
Thermoking Magnum Plus soğutma ünitesi
-40 °C'ye kadar soğutma
+30 °C'ye kadar ısıtma
= Daha fazla bilgi =
Genel Bilgiler
İmalat yılı: Nisan 2025
Model yılı: 2026
Ölçüler
Boyutlar (U x G x Y): 299 x 244 x 259 cm
Ağırlıklar
Boş ağırlık: 2.360 kg
Yük kapasitesi: 24.000 kg
Azami toplam ağırlık: 26.358 kg
Fonksiyonellik
Soğutma aralığı: -40 °C ile +30 °C
Soğutma motoru: elektrikli
Durum
Genel durum: çok iyi
Teknik durum: çok iyi
Optik durum: çok iyi
Kedpoy Ix D Defx Adzjlt
Daha fazla bilgi
Daha fazla bilgi için Arne Honingh ile iletişime geçebilirsiniz.
Küçük ilan
Roosendaal
2.760 km
Soğutulmuş/dondurulmuş konteynerler
THERMO KINGNEW 10FT REEFER / THERMOKING MAGNUM PLUS
Çağrı
Koşul: yeni, Üretim yılı: 2025, renk: beyaz, Yeni ve kullanılmamış 10 ft soğutucu konteyner
Thermoking Magnum Plus soğutma ünitesi
-40 °C'ye kadar soğutma
+30 °C'ye kadar ısıtma
= Daha fazla bilgi =
Genel Bilgiler
İmalat yılı: Nisan 2025
Model yılı: 2026
Ölçüler
Boyutlar (U x G x Y): 299 x 244 x 259 cm
Ağırlıklar
Boş ağırlık: 2.360 kg
Yük kapasitesi: 24.000 kg
Azami toplam ağırlık: 26.358 kg
Fonksiyonellik
Klsdpfoy Ixwdsx Adzjt
Soğutma aralığı: -40 °C ile +30 °C
Soğutma motoru: elektrikli
Durum
Genel durum: çok iyi
Teknik durum: çok iyi
Optik durum: çok iyi
Daha fazla bilgi
Daha fazla bilgi için Arne Honingh ile iletişime geçebilirsiniz.
Küçük ilan
Nisterau
2.495 km
Damperli yarı römork
FLIEGLStahlhalbschalenmulde 3x9t iso, DHKS 390, 24 cbm
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 28.550 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2020, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.200 mm, yükleme alanı yüksekliği: 1.300 mm, yükleme alanı hacmi: 24 m³, Üretim yılı: 2020, Donanım: ABS, Havalı süspansiyon, kaldırılabilir dingil, BPW disk, EBS, PVC yarım çamurluklar, ortada düşme destek ayağı, alüminyum jantlar, katlanabilir yan koruma, termal izolasyon, üstten monte arka duvar, merdivenli yürüme platformu, PVC arka duvar brandası, PVC makaralı branda.
Klsdpfx Asy Dy Agedzst
Küçük ilan
Triptis
2.248 km
Kipper
FlieglDHKS 390 -25 m³
Çağrı
Koşul: yeni, makine/araç numarası: 7d479432c7290a73a46ff6365, boş ağırlık: 5.000 kg, azami yük ağırlığı: 34.000 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.960 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22.5, Further Information
Chassis Tipper Semi-Trailer
Fine-grained steel welded construction in basic lightweight design, fifth wheel plate with replaceable 2-inch kingpin
Patented Curved Front End
Central telescopic support leg; uncoupling under load is not possible; when uncoupled, the vehicle must be positioned with a rearward incline.
Wheel chocks with holder
Folding underride guard
Half-shell mudguards
Integrated mudguard holder with stone-repellent surface
Tarpaulin rod with bracket
Tow hook at the rear
Axles & Suspension
SAF disc brake axles with 430 mm disc diameter
Laser-aligned axles/chassis to reduce tire wear and fuel consumption
Axles in off-road specification
Air suspension
1st axle automatic lift axle, including forced lowering and start-up aid
Hot-dip galvanized lift axle mechanism, 10 years warranty against rust penetration
Braking System
2-line compressed air brake system, color-coded piping for easy maintenance
Spring-loaded parking brake
2 fail-safe coupling heads at the front, without connecting line
EBS, electronic braking system with EBS socket at the front, without connection cable
Note: The trailer may only be towed by towing vehicles that ensure ABS functionality!
With raising & lowering valve
Vehicle stability system
Wheels and Tires
385/65 R22.5
Steel rims, factory silver
'TPMS' Tire Pressure Monitoring System according to ECE R 141, display via the truck’s dashboard through EBS (installation on truck required; only applies to original tires)
Electrics
24 Volt, multi-chamber lights, lateral yellow LED lighting
Lateral yellow LED lighting linked to indicators ('flashing side lights')
2 x 7-pin fail-safe sockets at the front, without connection cables
Hydraulics
Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, nominal width 48 mm (without hose connection)
Operation hydraulically via truck PTO
Body (Tipping Body)
Steel round body in Stone Master Design, made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic system and access steps at front wall.
Greenline – conical and aerodynamic trough shape
Shovel and broom holder on the front wall, outside
Membrane tailgate
Kedpfx Adoi Ri Dpjzslt
Tailgate as pendulum flap with double joint hinge, external with double hook locking. Two clamping screws with T-bar locks at the lower side edges.
Continuous 4 mm thick side walls, 4/5 mm thick floor, wear- and weight-optimized construction
Standing platform with access, connection plate for air/electric and brakes with extra-large operating space for best accessibility
Roll tarpaulin stows on FR-right, with central locking on FR-left
Registration Country / Plates
Germany
Approval according to EC 2007/46
Body stability according to EN 12642
24/7 service hotline
Prepared for single-line number plate holder
Warning plate according to ECE-70
Contour marking with reflective strips according to ECE R 048, white on sides, red at rear
Painting
Frame: DB 7350 Novagrau
"10 years warranty against rust penetration''
Support legs: galvanized
Body: RAL color of your choice, single tone
Roll tarpaulin: RAL 7035 light grey
Küçük ilan
Triptis
2.248 km
Kipper
FlieglDHKS 390 - 27 m³
Çağrı
Koşul: yeni, makine/araç numarası: 74dd481d88dffaf9218e6ee58, boş ağırlık: 5.200 kg, azami yük ağırlığı: 33.800 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.600 mm, yükleme alanı hacmi: 27 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.110 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, Further information
Chassis
Semi-trailer tipper chassis made of fine-grain steel welded construction in basic lightweight design. Fifth wheel plate with interchangeable 2" king pin.
Patent-pending curved front wall.
Central telescopic support leg; uncoupling while loaded is not possible, when uncoupled the vehicle must be inclined rearwards.
Klsdpfx Adsi Ri A Iozjt
Wheel chocks with holder.
Foldable underride protection.
Half-shell mudguards.
Integrated mudguard brackets with stone-repellent surface.
Tarpaulin bar with holder.
Tow hook at rear.
Axles & Suspension
SAF disc brake axles with 430 mm disc diameter.
Axles / chassis measured by laser for reduced tire wear and fuel consumption.
Axles in off-road specification.
Air suspension.
1st axle automatic lift axle, including forced lowering and start-up aid.
Hot-dip galvanized lift axle mechanism, 10 years warranty against corrosion.
Brake System
2-line air pressure brake system, color-coded lines for easy servicing.
Spring-actuated parking brake.
2 foolproof coupling heads at the front, without connection line.
EBS electronic braking system with EBS socket at the front, without connection cable.
Note: The trailer may only be towed by towing vehicles that ensure ABS functionality!
With raise and lower valve.
Vehicle stability control system.
Wheels and Tires
385/65 R22.5.
Steel rims, factory silver.
"TPMS" tire pressure monitoring system according to ECE R 141, display via driver display in towing vehicle, via EBS, no truck installation. (Truck must be equipped as prerequisite. Only on original fitment).
Electrics
24 Volt, multi-chamber tail lights, side yellow LED lights.
Side yellow LED lights linked to indicators ("blinking side marker lights").
2 white position lights front.
2 white/red lane marker lights rear.
2 x 7-pin foolproof sockets at the front, no connection cable.
Hydraulics
Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw-on coupling, fixed part, NW 48 mm (no hose connection).
Operation hydraulically via truck PTO.
Body
Steel rounded tipper body in "Stone Master" design, made of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic system with access ladder at front wall.
"Greenline" – tapered and aerodynamic body design.
Shovel and broom holder externally at front wall.
Membrane rear wall.
Rear wall as pendulum flap with double-joint hinge, external mounting with double hook lock. 2 clamping screws with toggle locks at lower sides.
Continuous 4 mm thick side walls, floor 4/5 mm thick. Wear- and weight-optimized construction.
Standing platform with access, connection plate for air/electrics and brakes with ample space for optimal handling.
Roll tarp depositable on right side, with central locking on left.
Registration Country / Plates
Germany.
Type approval according to EC 2007/46.
Superstructure strength according to EN 12642.
24/7 service hotline.
Prepared for single-line license plate holder.
Warning sign according to ECE-70.
Contour marking with reflective tape as per ECE R 048, white on sides and red at rear.
Paintwork
Frame: DB 7350 Nova grey.
"10-year corrosion protection warranty".
Support legs: galvanized.
Body: RAL of choice, single color.
Roll tarp: RAL 7035 light grey.
Küçük ilan
Triptis
2.248 km
Kipper
FlieglDHKS 390 - 31 m³
Çağrı
Koşul: yeni, makine/araç numarası: 637ca014c140e4e48dc3231a0, boş ağırlık: 5.700 kg, azami yük ağırlığı: 33.300 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.700 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.600 mm, yükleme alanı hacmi: 31 m³, toplam uzunluk: 9.090 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.110 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, Further information
Chassis Semitrailer Tipper
Fine-grained steel welded construction, lightweight basic design, fifth wheel plate with interchangeable 2" kingpin
Curved front panel patented
24 t, 2-speed landing gear, single-sided operation, with straight lower part, without compensating device
Wheel chocks with holders
Foldable underrun protection
Half-shell mudguards
Integrated mudguard holders, stone-repellent surface
With anti-spray splash guards only on rearmost axle
Tarp pole with holder
Tow hook at rear
Axles & Suspension
BPW disc brake axles with 430 mm disc diameter
Axle/chassis laser alignment to reduce tyre wear and fuel consumption
Air suspension
1st axle is an automatic lift axle, including forced lowering and start-assist function
Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through
Braking system
2-line compressed air braking system, color-coded lines for easier servicing
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front, without connecting line
EBS (Electronic Braking System) with EBS socket at the front (no connecting cable)
Attention: The trailer may only be towed by tractors which guarantee the effectiveness of the ABS!
With lift & lower valve
Vehicle stability system
Wheels and Tyres
385/65 R22.5
Steel rims, factory silver
"TPMS" Tire Pressure Monitoring System according to ECE R 141, display on the tractor dashboard via EBS, no truck installation (must be pre-equipped in the truck, only for standard tyres)
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
Side yellow LED lighting linked to blinking indicators “flashing side markers”
2 x 7-pole non-interchangeable sockets at the front, without connecting cable
Hydraulics
Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed section, NW 48 mm (no hose connection)
Klodpji Rivdefx Adzst
Operation: hydraulically via PTO on the truck
Body/Tipper
Steel round body in “Stone Master Design” made of highly wear-resistant HB 400/450 steel. Sloped front wall with exterior hydraulic cylinder mounting.
Internal front-wall entry access.
Greenline – conical and aerodynamic body design
Shovel and broom holder outside on the front wall
Tailgate
Membrane tailgate – pendulum flap with double-joint hinges, externally mounted with double hook locking. 2 clamping screws with wing locks at the bottom left/right.
Side walls continuously 4 mm thick, floor 4/5 mm thick. Wear- and weight-optimized construction.
Standing platform with steps, connector plate for air/electric and brakes with large clearance for optimal operability
Roll tarp, can be stored on passenger side, central lock on driver side
Registration/Signage
Country of registration: Germany
Type approval per EC 2007/46
Body strength per EN 12642
24/7 service hotline
Prepared for single-row number plate holder
Warning panel in accordance with ECE - 70
Contour marking with reflective tape according to ECE R 048, white on sides & red at the rear
Paintwork
Frame: DB 7350 Novagrau
"10-year anti-perforation warranty"
Landing gear legs: black coated
Body: RAL of choice, single color
Roll tarp: RAL 7035 light grey
Küçük ilan
Triptis
2.248 km
Kipper
FlieglDHKS 390 - 50 m³ LightMaster Agrar
Çağrı
Koşul: yeni, makine/araç numarası: 2f960ff7c44de83fd060ec5df, boş ağırlık: 6.750 kg, azami yük ağırlığı: 32.250 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.150 mm, yükleme alanı hacmi: 50 m³, toplam uzunluk: 10.300 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.670 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, Further information
Chassis Semi-Tipper
Fine-grain steel welded construction, in basic lightweight design, fifth wheel plate with interchangeable 2-inch kingpin
Patented curved front panel
24-ton, 2-speed landing gear, single-side operation, with straight lower part, without load compensation
Wheel chocks with holder
Folding underrun protection
Half-shell mudguards
Integrated mudguard brackets, stone-resistant surface
Tarp rod with holder
Tow hook at the rear
Axles & Suspension
BPW disc brake axles with 430 mm disc diameter
Axles/chassis laser-measured: reduces tire wear and fuel consumption
Air suspension
1st axle with automatic lift axle, including forced lowering and starting aid
Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through
Braking system
2-line compressed air brake system, color-coded line routing for easier service
Spring-actuated parking brake
2 non-interchangeable coupling heads at the front, without connecting line
EBS, electronic braking system with EBS socket at the front, without connecting cable
Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS!
With raise & lower valve
Vehicle - driving stability system
Wheels and Tires
385/65 R22.5
Steel rims, factory silver
"TPMS" tire pressure monitoring system according to ECE R 141, display via the towing vehicle's display, via EBS, without truck installation (prerequisite must be met in the truck; only for standard tires).
Electrics
24 Volt, multi-chamber lights, yellow LED side marker lights
Yellow LED side marker lights linked to indicator "flashing side marker lights"
2 x 7-pin, non-interchangeable sockets at the front, without connecting cable
Hydraulics
Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection)
Operation hydraulically via truck PTO
Kjdei Rizfjpfx Adzslt
Body
Steel box body made of highly wear-resistant HB 400 steel, sloped front wall with external hydraulic cylinder mount. Shovel and broom holder outside on front wall. Inside with ladder on front wall.
Side walls continuously 3 mm thick, floor continuously 3 mm thick
Membrane tailgate
Internal width at bottom approx. 1,440 mm
Aluminum tailgate, pendulum-mounted with "double-joint hinge" and with two-leaf door split 1/2 to 1/2, top with swing arm, with one grain chute per door
Standing platform with access, connector plate for air/electrics and brakes with large clearance for optimum operability
Roll tarp, to be stowed on FR-right, with central locking on FR-left
Country of registration / plates
Germany
Type approval according to EC 2007/46
Superstructure stability according to EN 12642
24/7 service hotline
Prepared for single-line license plate holder
Warning sign according to ECE-70
Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear
Paintwork
Frame: DB 7350 Novagrau
"10-year warranty against rust-through"
Body: RAL on request, single color
Roll tarp: RAL 7035 light grey
Küçük ilan
Triptis
2.248 km
Kipper
FlieglDHKS 390 - 50 m³ LightMaster
Çağrı
Koşul: yeni, makine/araç numarası: aaa375d3c15c697ac80fb51f9, boş ağırlık: 7.900 kg, azami yük ağırlığı: 31.100 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı genişliği: 2.330 mm, yükleme alanı yüksekliği: 1.950 mm, yükleme alanı hacmi: 50 m³, toplam uzunluk: 11.200 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.470 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, Further information
Chassis semi-trailer tipper
Fine-grain steel welded construction, lightweight design, with slight camber, fifth wheel plate with replaceable 2" king pin
24 t, 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation
Wheel chocks with holder
Foldable underrun protection
Half-shell fenders
Integrated fender bracket, surface designed to repel stones
Tarp bar with holder
Tow hook at rear
Axles + Suspension
BPW disc brake axles with 430 mm disc diameter
Axle/chassis laser alignment to reduce tire wear and fuel consumption
Air suspension
1st axle automatic lift axle including forced lowering and traction aid
Hot-dip galvanized lift axle mechanism, 10-year guarantee against corrosion
Brake System
2-line compressed air braking system, color-coded piping for easy maintenance
Spring-type parking brake
2 fail-safe coupling heads at the front, without connecting line
EBS, Electronic Braking System with EBS socket at the front, without connecting cable
Note: The trailer may only be towed by towing vehicles that ensure ABS functionality!
With raise/lower valve
Vehicle stability system
Wheels and Tires
385/65 R22.5
Steel rims, factory silver
"TPMS" Tire Pressure Monitoring System according to ECE R 141, displayed on the towing vehicle's display via EBS, not installed on truck (the technical requirements for this must be present in the truck. Only applies to basic tires).
Electrics
24 Volt, multi-chamber lights, yellow LED side lighting
Yellow LED side lighting synchronized with indicator "flashing side markers"
2 white position lights at the front
2 white/red lane marker lights at the rear
2 x 7-pin fail-safe sockets at the front, without connecting cable
Hydraulics
Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection)
Operation hydraulically via truck PTO
Klsdpfxei Rizqe Adzjt
Tipping body
Steel trough made from highly wear-resistant HB 400 steel, sloped front wall with external hydraulic cylinder mounting. Foldable aluminium splash guard on front right for roll tarp. Shovel and broom holder on exterior front wall. Internal access at front wall.
Side walls continuous 4 mm thick, floor continuous 5 mm thick
Membrane tailgate
Rear wall with 2-leaf door division 1/2 to 1/2, with 1 slider in the right leaf.
With externally mounted rotary bar lock and mechanical lower lock
Standing platform with access, connection plate for air/electrics and brake with large free space for optimal operability.
Roll tarp can be stowed on the front right, with central locking on front left
Country of registration/plates
Germany
Type approval according to EC 2007/46
Body strength according to EN 12642
24/7 service hotline
Prepared for single-line license plate holder
Warning panel according to ECE - 70
Contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear
Paintwork
Chassis DB 7350 nova grey
10-year guarantee against corrosion
Support legs black coated
Tipping body: single color, RAL of your choice
Roll tarp: RAL 7035 light grey
Küçük ilan
Avusturya
1.826 km
Tezgah matkabı
FLOTTTB 10 Basic Plus mit Zwischent
Çağrı
Koşul: yeni, Durum: yeni
Teslimat süresi: siparişten itibaren yaklaşık 2–4 hafta
Menşei ülke: Almanya
Fiyat: 2.792,28 €
Çelikte delme kapasitesi: 10 mm
Bağlantı: B 16
Maksimum çıkıntı: 220 mm
Devir aralığı: 250–3.000 dev/dak
Motor: 0,45 kW
Uzunluk: 320 mm
Genişlik: 520 mm
Yükseklik: 820 mm
Ağırlık: 44 kg
Taret strok: 60 mm
Mil–taban mesafesi: 140–315 mm
Tabla ebadı: 300 x 250 mm
Kolon çapı: 70 mm
Sürekli/normal delme kapasitesi: 10/12 mm (E335/ST60 çeliğinde)
Dayanıklı, yüksek kaliteli ve eğimli döner başlık ile kolay devir okuma
Kledpfx Adjy Hf Rzezjt
LED aydınlatma
Hızlı ayarlanabilir ve ergonomik delme derinlik mesnedi
Ortada konumlandırılmış düğmeyle kademesiz devir ayarı
ACİL DURDURMA mantarlı düğme
Termal aşırı yük koruması
Düşük voltaj kesici
Elektrik korumalı delme koruyucu
Schuko fişli bağlantı kablosu (1,2 m)
Tek vardiyada 3 yıl garanti
Ürün No: 217.410; ara masa ve dişli ile masa yüksekliği ayarı
OPSİYONLAR:
Kapılı ve çekmeceli makine dolabı
Delme paketi 2 (mengene & hızlı mandren)
Küçük ilan
Avusturya
1.826 km
Masa tipi yatay işleme tezgahı
FLOTTTB 10 Basic Plus
Çağrı
Koşul: yeni, Durum: yeni
Teslim süresi: siparişi takiben yaklaşık 2 - 4 hafta
Menşei ülke: Almanya
Fiyat: 2292,56 €
Çelikte delme kapasitesi: 10 mm
Bağlantı: B 16
Konsol derinliği: 220 mm
Devir sayısı: 250 - 3000 dev/dak
Motor: 0,45 kW
Uzunluk: 320 mm
Genişlik: 520 mm
Yükseklik: 820 mm
Ağırlık: 44 kg
Mandren inme mesafesi: 60 mm
İş mili – tabla mesafesi: 140 - 315 mm
Klodpfx Ajy Hf Rbedzet
Tabla: 300 x 250 mm
Kolon çapı: 70 mm
Sürekli/standart delme kapasitesi: 10/12 (E335/ST60’da)
Dayanıklı, yüksek kaliteli ve eğimli döner kapak ile kolay devir okuma
LED aydınlatma
Hızlı ayarlanabilir ve ergonomik delme derinliği stoperi
Ortada düğme ile kademesiz devir ayarı
ACİL DURDURMA düğmesi
Termal aşırı yük koruması
Düşük voltaj rölesi
Elektriksel emniyetli delme koruması
1,2 m şebeke kablosu ve Schuko fişi
Tek vardiyada 3 yıl garanti
Ürün no. 217.400 – Ayarlanabilir başlık yüksekliği
OPSİYONLAR (FİYATLAR TALEP ÜZERİNE):
Kapılı ve çekmeceli makine dolabı
Delme Paketi 2 (mengene ve hızlı mandren)
Küçük ilan
Cantù
2.263 km
çalışma merkezi
ALBERTIBASIC PLUS CN
Çağrı
Koşul: iyi (kullanılmış), Code: 0382
Marke: ALBERTI
Modell: BASIC PLUS CN – CE-Ausführung
CNC-Bearbeitungszentrum für Möbel und Beschlagteile – CE-Ausführung
Vertikale "Point-to-Point"-Bohrmaschine mit Durchlaufbetrieb, Plattenbeschickung und Längsbewegung, mit monolithischem Grundrahmen aus elektroschweißtem Stahl. Unabhängige Steuerung von 3 Achsen mit optimierten Bohr- und Einpresszyklen.
Kjdoy R U Abjpfx Adzolt
Plattenmaße:
Max.: 3000 x 1200 x 60 mm
Min.: 300 x 110 x 15 mm (automatisches Be- und Entladen)
Min.: 300 x 110 x 8 mm (manuelles Be- und Entladen)
Monoblock-Konfiguration mit unabhängigen Bohrspindeln:
- 16 unabhängige vertikale Bohrspindeln mit 32 mm Achsabstand entlang der Y-Achse (Vormontage)
- 3 horizontale Bohrköpfe, Doppelabgang in X-Richtung mit 32 mm Teilung und vertikalem Niederhalter, seitlich am Monoblock montiert
- 10 unabhängige vertikale Bohrspindeln mit 32 mm Achsabstand entlang der X-Achse (Beschläge)
- 1 horizontaler Bohrkopf, Doppelabgang in Y-Richtung mit vertikalem Niederhalter
Arbeitstisch-Konfiguration:
- Beladestrecke mit geraden, PVC-beschichteten Rollen
- Nutzlänge für Plattenauflage: 2000 mm
- Nutzbreite für Plattenauflage: 840 mm
- Referenzfläche im Maschinenkörper, bestehend aus präzisionsgeschliffenen, PVC-beschichteten frei drehenden Rollen, Nutzbreite 1000 mm
- Arbeitshöhe: 920 mm, höhenverstellbar +/- 30 mm
- Entladestrecke mit geraden, PVC-beschichteten Rollen
- Nutzlänge für Plattenauflage: 2000 mm
- Nutzbreite für Plattenauflage: 840 mm
- Plattenanschlag mit automatischer Positionierung
- Vertikale Spannzangen am Plattenanschlag, automatische Anpassung an Werkstückdicke über Pneumatikzylinder
- Vakuumpumpe 40 m³
Fräseinheit „Elektrospindel“ 9 PS
Werkzeugaufnahme HSK-63F für automatischen/manuellen Werkzeugwechsel. Drehzahl über Programm wählbar (12.000/18.000 U/min). Aggregat geeignet für Fräsarbeiten in X- und Y-Richtung (linear/interpoliert), innerhalb der technischen Maschinenparameter. Rechts- und Linkslauf. Max. Werkzeug-Ø 40 mm. 1 HSK-63F-Aufnahme rechts inklusive.
Automatischer Werkzeugwechsler:
4 Positionen für automatischen Werkzeugwechsel mit max. Ø 40 mm. 4 Werkzeugaufnahmen für Kegel ISO 30 inklusive. Passend zur Fräseinheit. 1 Kegel HSK-63 inklusive.
Kreissägeaggregat:
Unabhängiger Motor 1,8 PS, Drehzahl 12.000 U/min, geeignet für Nutenfräsungen in X- und Y-Richtung, innerhalb der technischen Maschinenparameter. Werkzeugaufnahme mit Flansch, max. Bohrungs-Ø 120 mm, max. Stärke 8 mm.
Bedientafel und Steuerung: Mod. ALBNT (TPA) – Betriebssystem Windows XP, ALBATROS-TPA-Software
Installierte Leistung: 12 kW
Druckluft: 6/7 bar
Absaugung: Geschwindigkeit 30 m/s – Volumenstrom 8686 m³/h
Abmessungen: siehe Beiblatt
Gewicht: 3500 kg
Küçük ilan
Toruń
2.018 km
Boya kabini Model Basic PLUS 7x4
Kabina lakierniczaBasic PLUS 7x4
Çağrı
Koşul: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, toplam uzunluk: 7.000 mm, toplam genişlik: 4.000 mm, toplam yükseklik: 3.130 mm, iç yükseklik: 2.700 mm, iç uzunluk: 6.900 mm, iç genişlik: 3.900 mm, Donanım: kabin, The automotive spray booth is a fundamental piece of equipment in refinishing technologies, enabling paintwork to be carried out in safe and comfortable conditions while minimizing negative impacts on the immediate surroundings and the environment.
Specifications:
- External dimensions: 7000 x 4000 x 3130 mm
- Internal dimensions: 6900 x 3900 x 2700 mm
- Entrance gate: 3000 x 2600 mm (three-winged)
- Service door: 640 x 1800 mm
- Structure: standard steel
- Heat exchanger: standard steel
- Panels: EPS polystyrene
- Total power: 7 kW
- Installation: indoor use only
Spray booth wall structure:
- Thickness: 50 mm
- Insulation: EPS polystyrene
- Color: white
Klodpfsxnbf Ujx Adzet
Spray booth base:
- Booth mounted directly on floor/slab
- Installation exclusively indoors
Double roof:
- Upper exterior layer:
- Corrugated sheet metal panels
- Internal structure:
- Partially grated construction
Air exchange system (intake system):
- 5.5 kW jet fan – 1 unit
- Output: 20,000 m³/h
- Belt drive
- No air circulation control
Lighting (side lights):
- 20 side lamps
- No option for ceiling lighting
Air heating system:
- Single-stage Riello G10 oil burner, 54–120 kW
- Burner control: manual
- Heating-up time: 20 minutes
Spray booth access and doors:
Main doors:
- Dimensions: 3200 x 2600 mm
- 3-leaf door system
Service doors:
- Booth equipped with service door
- Pressure locks
Spray booth filtration:
- Intake: Pre-filter
Ceiling filter: Primary high-throughput filtration.
Filter specification:
- Weight: 600 g/m³
- Thickness: 50 mm
- Airflow: 900 m³/h
- Retention efficiency: 97 %
- Air velocity: 0.25 m/s
- Dust holding capacity: 650 g/m³
- Max. temperature: 100 °C
- Filtration class (EN 779): M5
- Fire resistance (DIN 53438): F1
Küçük ilan
Polonya
2.465 km
EMCO Turn 420 MC Plus
EMCOTurn 420 MC Plus
Çağrı
Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2005, maksimum mil hızı: 5.000 dev/dak, Çubuk çapı (maks.): 26 mm, toplam genişlik: 2.200 mm, toplam yükseklik: 2.200 mm, X ekseni hareket mesafesi: 78 mm, Y ekseni hareket mesafesi: 210 mm, toplam ağırlık: 2.900 kg, kontrolör üreticisi: SIEMENS, kontrolör modeli: SINUMERIK 840D with EMCO specials, eksen sayısı: 4, Bu EMCO Turn 420 MC Plus 2005 yılında üretilmiştir. Maksimum 100 mm tornalama çapına ve maksimum 600 mm parça uzunluğuna sahiptir. Makine, 0-5000 rpm'lik güçlü bir iş mili hızı aralığı ve 24 istasyonlu bir takım değiştirici ile donatılmıştır. Yüksek kaliteli tornalama kabiliyetleri elde etmek istiyorsanız, satışa sunduğumuz EMCO Turn 420 MC Plus çok milli tornalama makinesini göz önünde bulundurun. Daha fazla bilgi için bizimle iletişime geçin.
Kledpey E Sp Uofx Adzst
• Durum: Çok iyi; bağlı ve test için hazır
• Teknik özellikler:
• Kızak üzerinde salınım: 160 mm
• Ana milden karşı mile: 408 mm
• Maks. dönüş çapı: 100 mm
• Maks. parça uzunluğu: 600 mm
• Maks. çubuk stoğu çapı: 26 mm
• Seyahat:
• X/Z: 78 mm
• Ana iş mili:
• Maks. tork: 38 Nm
• İş mili adaptörü: 70 h5
• Mil yatağı (ön ID): 60 mm
• İş mili deliği: 38 mm
• Karşı iş mili:
• Hız aralığı: 0-5000 rpm
• Tork: 38 Nm
• İş mili adaptörü: 70 h5
• Mil yatağı (ID): 60 mm
• Kelepçe uzunluğu (Ø26 mm): yaklaşık 100 mm
• Seyahat (Z2): 233 mm
• C ekseni:
• Çözünürlük: 0.001°
• Hızlı travers: 1000 rpm
• Konumlandırma: 3°
• Tahrik gücü:
• Güç: 9 kW
• Takım değiştirici:
• Alet istasyonları: 2 × 12
• VDI şaftı: VDI 16
• Takım boyutu (kare): 16 × 16 mm
• Delme çubuğu çapı: 25 mm
• Dizin oluşturma süresi: 0,4 sn
• Tahrikli aletler:
• Hız aralığı: 0-5000 rpm
• Maks. tork: 3 Nm
• Maks. güç: 1,6 kW
• Alet sayısı: 2 × 4
• Besleme tahrikleri:
• Hızlı travers X/Z; X1/Z1: 12/20 m/dak
• Besleme kuvveti X: 3000 N
• Besleme kuvveti Z: 3000 N
• Hızlanma süresi: 0,1 sn
• Soğutma sıvısı sistemi:
• Tank kapasitesi: 200 L
• Pompa gücü: 0,57 kW
• Güç tüketimi:
• Bağlı yük: 15 kVA
• Besleme basıncı: 6 bar
• Besleme oranı: 300 L/saat
• Boyutlar:
• Orta yükseklik (üst/alt): 1179 / 1030 mm
• Ayak izi (G × D): 2200 × 1386 mm
Ek ekipman
• Aksesuar seti ve alet tutucuları dahildir
Technical Specification
Counter Spindle Yes
Driven Tools Yes
Küçük ilan
Diespeck
2.278 km
Damperli kamyon
VolvoFMX 420 6x2 Bordmatik Thermo mit Kran
Çağrı
Koşul: ikinci el, kilometre: 21.900 km, güç: 315 kW (428,28 bg), ilk tescil: 06/2024, yakıt türü: dizel, boş ağırlık: 15.507 kg, toplam ağırlık: 26.000 kg, lastik boyutu: 385/65 R22,5 - 315/80 R22,5, dingil konfigürasyonu: 6x2, dingil mesafesi: 4.300 mm, yakıt: dizel, enerji verimliliği: E, frenler: VEB (Devlet işletmeleri kombinasyonu), renk: mavi, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı hacmi: 9 m³, yükleme alanı uzunluğu: 4.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 900 mm, Donanım: ABS, AdBlue, EBS (Elektronik Fren Sistemi), diferansiyel kilidi, ek farlar, elektronik denge programı (ESP), hız sabitleyici, navigasyon sistemi, park ısıtıcısı, tır çekici bağlantısı, vinç, çekiş kontrolü, şerit takip asistanı, Üre tankı (AdBlue)
Motor hacmi 12.777 cc
50'lik çekme kancası
Hidrolik (yardımcı güç çıkışı)
Düşük sesli
Kodpfxoym N I As Adzslt
Alaşımlı jantlar
Takip mesafe uyarı sistemi
Şerit takip asistanı
Faydalı yük 10.493 kg
Otomatik klima
Euro 6 E
Yaprak-hava-lift süspansiyon
Meiller 2-yönlü damper
Zemin ve yan kapakta sabitleme halkaları
Asfalt sürgüsü
Branda
Katlanabilir arka koruma
Atlas AK 135.2 E-10,30/3 A3 vinç
Güneşlik
Işık barı
Dönüşlü flaşörler
Geri görüş kamerası
Hava körüklü kabin
Basınçlı hava kornası
1 yatak
Buzdolabı
Alcoa Dura Bright
405 lt dizel / 90 lt AdBlue
Toplam çekici ağırlığı 63.000 kg
Römork ağırlığı 26.000 kg
Enzian mavisi
Yönlendirme destekli dingil
Hatalar olabilir.
Küçük ilan
Lüdenscheid
2.537 km
Tezgah matkabı
FLOTTTB 10 Basic Plus (NEU ab Werk)
Çağrı
Koşul: yeni, Üretim yılı: 2026, Standard equipment:
- Robust, high-quality, and inclined rotary hood for easy reading of rotational speed
- LED lighting
- Rapidly adjustable and ergonomic drilling depth stop
- Infinitely variable speed control
- Connection cable with SCHUCO plug (1.2 m)
- Undervoltage release
- Drill guard with electrical interlock
- Thermal overload protection
Kljdpfx Adeihipzjzot
- Emergency stop button
Weight (kg): 44
Motor (kW): 0.45
Single-phase current 230 V
Speed (rpm): 250–3000
Drilling capacity (mm):
- Steel: Ø 12 mm
- Aluminium: Ø 20 mm
- Softwood: Ø 40 mm
- Drilling depth: 60 mm
- Throat depth: 220 mm
- Column diameter: 70 mm
- Usable table surface (W x L): 300 x 250 mm
- T-slot size:
Number: 2, Spacing: 100 mm, Dimensions: Width 14/26 mm
- Spindle: B 16
- Speed display: Digital
- Drill depth display: Scale
- Drill depth stop: Rapidly adjustable stop ring
- Feed: Manual
OPTIONAL DRILLING PACKAGE 1 – Price: €272,-
– Vice [felix] 2.0 80
– Keyless drill chuck B16 1–13 mm (precision 0.17 mm)
- FACTORY WARRANTY: 3 years
- Free delivery incl. packaging
NOT THE RIGHT MACHINE FOR YOU?
WE ARE A FLOTT AUTHORIZED DEALER AND CAN OFFER YOU THE FULL FLOTT PRODUCT RANGE!
REQUEST A QUOTE NOW!
Küçük ilan
Borken
2.615 km
Kurutma dolabı / ısıtma dolabı
Thermo Scientific VötschUT 6420 300 °C
Çağrı
Koşul: mükemmel (kullanılmış), Thermo Scientific Vötsch
Model: UT 6420
For sale is a professional laboratory and industrial drying oven/heat chamber, Thermo Scientific / Vötsch Industrietechnik – Model UT 6420.
Klsdpfx Asx Hf Uaodzst
This unit is suitable for drying, heating, tempering, and heat treatment of materials and components at precisely regulated temperatures up to 300 °C.
Typical applications include laboratory, industry, workshop, research, as well as electronics and materials testing.
The stainless steel interior ensures even heat distribution and is designed for continuous operation.
Chamber: Stainless steel with removable shelves
External dimensions approx.: 170 × 70 × 80 cm (H × W × D)
Technical data:
Manufacturer: Thermo Scientific / Vötsch Industrietechnik
Model: UT 6420
Max. temperature: 300 °C
Temperature control: Electronic (Heraeus Kelvitron)
Rated voltage: 3/N/PE 400 V, 50/60 Hz
Rated current: 6.6 A
Power consumption: approx. 4.2 kW
Protection class: IP20
Weight approx.: 200–230 kg
Condition: used
Scope of delivery: (see picture)
(Specifications are subject to change and errors excepted!)
If you have further questions, please feel free to contact us by phone.
Küçük ilan
Berkel en Rodenrijs
2.775 km
Konteyner taşımacılığı
FlieglSDS420V2 | MULTI ALL CONNECTIONS | SAF DISC | D...
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2011, renk: diğer, Üretim yılı: 2011, Boş ağırlık: 5.100 kg
Aks 1: sol 8 mm, sağ 8 mm
Aks 2: sol 8 mm, sağ 8 mm
Aks 3: sol 8 mm, sağ 8 mm
Kljdpexqfyhsfx Adzjt
Römorkları üst üste istifleme imkanımız vardır!
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Székesfehérvár
1.642 km
Termoform makinası
Multivac thermoformer tooling, dye set,420mm
Çağrı
Koşul: ikinci el, Fotoğraflarda görülen Multivac şekillendirme ve kapama takımları satılıktır. Her biri 420 mm folyo genişliği için uygun 2 takım bulunmaktadır. Multivac 19.200.1240.95. Tepsi ölçüsü: 6x11cm x 18cm. Fiyat: 2000 EUR. Diğer takım: 9x11,5cm x 11cm, ürün numarası 105793236, fiyatı 2000 EUR.
Kledswth Uispfx Adzot
Küçük ilan
Radom
1.765 km
Bantlama makinesi
NM-420 W30Banding Machine
Çağrı
Koşul: iyi (kullanılmış), NM-420 W30 Bantlama Makinesi
Bu yepyeni makine, kanıtlanmış Batı tasarımlarına dayanmaktadır. Üretim Yılı: 2025.
Cihaz manuel veya otomatik modda çalışır.
Malzeme yerleştirildikten sonra, makine malzemeyi bantla sarar, sıkıştırır ve mühürler, şık bir paket oluşturur.
Kartvizit, broşür ve diğer materyallerin sıkıca sarılması için idealdir.
Teknik özellikler:
Bant genişliği: 30 mm
Dakikadaki çevrim sayısı: 26 çevrim/dak
Bantlanan ürün boyutları: 400 x 200 mm
Kodpfey Tu Rdjx Adzolt
Set, bantlar ve kullanım kılavuzu içerir.
Küçük ilan
Mezőtúr
1.484 km
Seri kesici
TRADEMAK SRLSqualo 420
Çağrı
Üretim yılı: 2025, Koşul: yeni, The SQUALO 420 double-shaft multi-blade saw is a modern, user-friendly, precise, and highly reliable machine.
Equipped with 2x45 kW main motors, for sale due to project cancellation!
If you have any questions, feel free to contact me!
Kjdsy Sw Euepfx Adzjlt
Küçük ilan
Radom
1.765 km
Otomatik Döner Delici
Cyklos RPM 350 PlusAutomatic Rotary Perforator
Çağrı
Koşul: iyi (kullanılmış), Cyklos RPM 350 Plus Otomatik Döner Perforaj Makinesi
Kledpfx Adey Sd Upozjt
Makine çok iyi durumda, üretime hazır.
Açıklama:
350 mm çalışma genişliğine sahip otomatik perforaj cihazı.
Sürtünmeli kâğıt beslemesi.
Her bir kâğıtta 1-5 arasında perforaj hattı üretebilir.
Besleyici ve çıkış tepsisi A3 ve daha küçük formatlara uygun.
Kullanımı kolay.
Kıvrım diski ile yükseltme seçeneği mevcut.
Kâğıt sayacı.
Dakikada 70-130 arası ayarlanabilir besleme hızı.
230V enerji beslemesi.
Ağırlık: 20 kg.
Çekya üretimi.
Sizin için aramayı kolaylaştırıyoruz: "fliegl dhks-420 thermo basic plus"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay



























































































































































































