Kullanılmış Holz-Her 1411-3 satın al (66.984)

Koşul: işlem için hazır (kullanılmış), IM Çok iyi durumda. Duodevunm Aepfx Almet

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2009, makine/araç numarası: 26, Fonksiyonellik: tamamen fonksiyonel, çalışma saatleri: 2.216 h, toplam yükseklik: 1.700 mm, toplam uzunluk: 6.100 mm, toplam genişlik: 1.450 mm, toplam ağırlık: 2.500 kg, Donanım: CE işareti, TEKNİK DETAYLAR Makine aşağıdaki konfigürasyona sahiptir: Ön freze ünitesi (takımlar mevcut) Tutkal ünitesi (takımlar mevcut) Kapatma ünitesi (takımlar mevcut) Kaba freze ünitesi (takımlar mevcut) Köşe yuvarlatma ünitesi (takımlar mevcut) Radius kazıma ünitesi (takımlar mevcut) Düz kazıma ünitesi (takımlar mevcut) MAKİNE BİLGİLERİ Güç tüketimi: 39,5 A Voltaj: 400 V Sigorta: 50 A Ölçüler ve Ağırlık Ölçüler (U x G x Y): 6.100 x 1.450 x 1.700 mm Ağırlık: 2.500 kg Dujdpfx Aoy Nxz Sslmot Çalışma saati: 2.216 saat DONANIM CE işareti

Koşul: iyi (kullanılmış), Üretim yılı: 2023, Für Anfragen: Zoltán Utasi +36 30 205 7380 • Kantenanleimmaschine für das Umleimen und die Nachbearbeitung von Werkstoffen in Plattenform (wie Spanplatten, MDF-Platten, Tischplatten usw.) • Kantenstärke bei Rollenware: 0,4 - 3 mm • Kantenstärke bei Streifenware: 0,4 - 5 mm • Kantenhöhe: max. 55 mm • Plattenstärke: 8 - 50 mm • Kantenquerschnitt: max. 5 x 50 mm (materialabhängig) • Werkstückbreite: min. 70 mm • Werkstücklänge: min. 180 /210 mm • Vorschubgeschwindigkeit: 9 m/min Djdpfxjy I Sruj Almsut • mit manueller Druckbrückenverstellung • Ausziehbare Werkstückauflage, Ausladung 500 mm • Steuerung Edge Control BC 15 mit 15,6" Touchscreen • Vi.se. (VIsual SEtting mode) stellt sämtliche Einstellwerte für digitale Zähler und Druckanzeigen als digitales Logbuch zur schnellen und sicheren Maschineneinrichtung bereit. • Vorfräsaggregat FG101 mit 2 Diamant-Fräsköpfen • Kantenbeschickung MG101 • Glu Jet Hybridtechnologie GJ101 (2,3 kW, 50 Hz): automatische Klebehöheneinstellung (nachlaufende Düse) • Behälter für 1,4 kg Leimpatronen (4 Patronen) • Glu Jet Spülbehälter • Automatische Nachfüllfunktion • Druckaggregat DW101 • Endbesäumaggregat KA101 (50 mm) pneumatischer Eintauchhub, 1 Motor, 0,22 kW, 12.000 U/min • Fräsaggregat FR101: Multifunktionsfräseinheit – bündig, Radius 2 x 0,37 kW, 12.000 U/min 2 x HW-Wechselmesserfräser Ø 75, Z4, R2 • Eckenrundungsaggregat FF101 auf Doppel-Linearführung • Ziehklingenaggregat ZK101 R=2,0 mm • Späneabsaugvorrichtung • Flächenziehklingenaggregat FK101 • Poliereinheit SW101 (2 x 0,13 kW, 1.400 U/min) Zum Reinigen und Polieren der Kanten, mit 2 schwenkbaren Textilscheiben Ø 120 mm, 0 - 5° • Sprühaggregat TR101 für Ein- und Auslaufbereich

Koşul: ikinci el, Holz Her Auriga 1308 XL Dodpfx Aoy Icmpjlmsut Compact design - edge thickness 0.4 - 8 mm Edge-Control SPS screen control, PPC color touchscreen monitor iTronic adaptive pressure and glue dosage control with rinsing routine Pre-milling unit for processing before the gluing unit Fully automatic edge magazine for roll and strip material GLU JET cartridge adhesive application station + PU bonding, with sensing nozzle Workpiece height 8-60 mm High-gloss package Pneumatic pressure unit Pneumatic end trimming unit for roll and strip material up to 8 mm edge thickness, with pneumatic adjustment of the end saws from 0-10° angled cuts Multifunctional milling unit 1827 MOT4 for flush milling up to 8 mm, radius milling - bevel milling 15° via NC axes Corner rounding unit – for rounding edges up to 3 mm edge thickness, working height 12 – 60 mm, postforming possible Scraper unit 1929 MOT4, for chamfers and radii with 2 scraper holders via NC axes Surface scraper unit FK701 with pre- and post-sensor – finish Buffing unit – for polishing Spraying device at infeed and outfeed Spraying device with lubricant for high gloss edges Complete DIA tool set included First delivered in 2020 Machine is in TOP CONDITION, from lease return – small business Available from stock Lieboch

Koşul: ikinci el, Üretim yılı: 2014, Für Anfragen: Zoltán Utasi +36 30 205 7380 • Motorgesteuerte Druckbalkenverstellung • Elektrische Vorschubeinrichtung, stufenlos, 400 V / 50 Hz, 2,2 kW • „Steuerung PPC 221 – mit 8,4'' VGA-Farbdisplay“ Leistungsfähige Steuerung mit sehr einfacher Bedienung • Fügefräsaggregat 1802, 400 V (2 x 2,0 kW, 200 Hz, 12.000 U/min) mit 2 Fräsaggregaten zur Vorbearbeitung der Plattenkante • Diamantfräser Ø 70 x 64 x 30 mm, Z2, Linkslauf Für Fügefräsaggregat 1801 / 1802 • Diamantfräser Ø 70 x 64 x 30 mm, Z2, Rechtslauf Für Fügefräsaggregat 1801 / 1802 • Kantenmagazin 1903 SYNCHRO automatischer Vorschub von Rollen- und Streifenmaterial • Leimauftragsstation Glu Jet GJ301 automatisch (2,3 kW, 50 Hz) • Druckzone 1913 pneumatisch Erste Rolle angetrieben, 2 zusätzliche Andruckrollen mit pneumatischer Einzelsteuerung • Kappaggregat 1918 (60 mm) pneumatisch Djdpfx Alox Huhcsmjut (2 x 0,45 kW, 12.000 U/min) pneumatisch schwenkbar 0/10° • Multifunktionsfräsaggregat 1827 pneumatisch (2 x 0,65 kW, 200 Hz, 12.000 U/min) • Vertikale Tastrollen manuell Manuelle Einstellung der vertikalen Tastrolle in 0,1-mm-Schritten zum Verputzen von Kantenüberständen, z.B. bei Kunststoffkanten • Diamantfräser Ø 56 / 60 mm, Z = 2, R = 2,0 mm, Linkslauf Diamantbeschichtetes Vollwerkzeug mit CM-Technologie (LEUCO-System), integrierte Späneabsaugung, patentiertes ProLock-E • Diamantfräser Ø 56 / 60 mm, Z = 2, R = 2,0 mm, Rechtslauf Diamantbeschichtetes Vollwerkzeug mit CM-Technologie (LEUCO-System), integrierte Späneabsaugung, patentiertes ProLock-E • Formfräsaggregat 1832 (1 x 0,35 kW, 200 Hz, 12.000 U/min) für Kantenstärken bis 3 mm • Diamantfräser Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, mit CM-Technologie (LEUCO-System), integrierte Späneabsaugung, für Profilfräsaggregat 1832 • Ziehklingenaggregat 1929 pneumatisch inkl. pneumatischer Verstellung (separat für oben und unten) • HW-Wendemesser für Ziehklingenhalter 1929 / 1927 R = 2,0 mm (2 St. benötigt) • Flachziehklingenaggregat 1964 Entfernen von Leimresten für eine saubere Leimfuge • Polieraggregat 1940 (2 x 0,12 kW, 50 Hz, 1.400 U/min) Zur Endreinigung und Kantenpolitur. Mit 2 Textilscheiben, Schwenkbereich 0–5°

Üretim yılı: 2016, Koşul: iyi (kullanılmış), Für Anfragen: Zoltán Utasi +36 30 205 7380 • Kantenstärke bei Rollenware: 0,4 - 3 mm • Kantenstärke bei Streifenware: o max. 3 mm mit Aggregat FF701 o max. 8 mm ohne Aggregat FF701 o max. 15 mm möglich durch Werkzeugwechsel am Bündigfräsaggregat Dsdpfx Alewkf Twjmout • Kantenhöhe: max. 65 mm • Werkstückdicke: 8 - 60 mm • Werkstückbreite: min. 65 mm • Werkstücklänge: min. 160 mm • Vorschubgeschwindigkeit: stufenlos 10 - 18 m/min LUMINA 1380 Ltronic Motorische Druckbalkenverstellung Automatische Transportketten-Schmierung Vorbereitung für RETURN-Anschluss Elektrischer Antrieb für variablen Vorschub 400 V / 50 Hz, 2,2 kW Bedienung Edge Control 19 mit 18,5" Touchscreen ECO MODE Energiesparmodus Vorfräsaggregat 1802 mit 2 Fräsmotoren Kantenmagazin MG701 SYNCHRO – Automatischer Vorschub für Rollen- und Streifenware Ltronic LT702 NIR+ Laser-Kantenbearbeitungseinheit Leimauftragssystem Glu Jet GJ302 Automatisiert, motorisch, automatische Leimhöhenverstellung (Abtastdüse) (EVA, PUR) Glu Jet Spülbehälter Wechselwagen GJ302 Wechselwagen LT702 Andruckzone 1913 MOT: 1. Walze angetrieben, 2 Mitdruckrollen Sprühaggregat nach der Andruckzone mit Antistatik-Kühlmittel-Einsatz Kappaggregat 1918 (60 mm), pneumatisch Formfräsaggregat FR701: Spielfreie Mechanik und 6 voll digitale NC-Servoachsen für Formfräsaggregat FF701: Spielfreie Mechanik und 4 voll digitale NC-Servoachsen gewährleisten 100 % Wiederholgenauigkeit auf Knopfdruck. Ziehklingenaggregat 1929 MOT4 mit motorischer Verstellung der Abtastrollen Flächenleimziehklinge FK701 Mit Vor- und Nachabtastung für sauberes Auskratzen von überschüssigem Leim über die gesamte Plattenlänge – für eine saubere Leimfuge. Sprühaggregat 1856 für Ein- und Auslaufbereich Polieraggregat 1940 Zum Reinigen und Polieren der Kante

Koşul: ikinci el, Holz Her Sprint 1317 Heavy-duty design – edge thickness 0.4 – 8 mm PLC screen control Infeed fence controlled via PLC Pre-milling unit for jointing before the gluing section Fully automatic edge magazine for coil and strip material Glue application station for cartridge and PUR gluing Adhesive application using nozzle technology Workpiece height 6–50 mm Glue height adjustment Pneumatic pressure unit End trimming unit 1918 for coil and strip up to 8 mm edge thickness Pneumatic adjustment of end saws from 0–10° bevel Milling unit 1942 MOT2 for flush trimming of 8 mm, radius and bevel trimming – 15° Scraping unit for bevels and radii with 2 scraper blade holders Corner rounding unit 1832 for rounding edges up to 3 mm edge thickness in through-feed Pneumatic engagement/disengagement Surface scraper unit – finishing Dujdpfx Aljy Ewv Hsmet Machine is FUNCTIONAL and in GOOD CONDITION Located at site

Koşul: mükemmel (kullanılmış), Üretim yılı: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic Edge Banding Machine with cartridge-based glue system for processing wood, PVC, ABS, and veneer edges. Suitable for furniture, panel materials, custom production, kitchens, bathroom furniture, joineries, and much more – CE-compliant. Technical Data: Min./Max. Panel Height: 6 – 45 mm Edge Thickness: 0.4 – 6 mm Maximum Glue Height: 51 mm Minimum Panel Width: 60 mm Minimum Panel Length: 180 mm Feed Speed: 8 m/min Compressed Air: 6–7 bar Machine Configuration: Automatic feed for roll and strip material Cartridge glue system enabling in-operation switching between EVA and PUR glues or changing glue color 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunctional unit with controlled axis for flush and bevel trimming with 2 motors each 0.6 kW Flat scraper unit Radius scraper unit Buffing unit Soundproof enclosure Control: Rotary and swiveling control panel Duedpfx Aey Emw Hjlmjt All units can be controlled individually Function display with text and graphics Pre-selection display of units Program list with names and numbers, self-diagnosis Approx. Machine Dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1000 kg INCLUDES OTT Rondomat – Corner rounding device Note on Used Machines: • Errors in the technical specifications and prior sale reserved. • Prices given are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as inspected without any claim to warranty. Buyers are welcome to inspect the machines at the site. • Special arrangements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Koşul: ikinci el, Üretim yılı: 2021, Fonksiyonellik: tamamen fonksiyonel, Satılık: Premium Holz-Her 1329 Multi Kenar Bantlama Makinesi + Return-Master 5920 Yüksek kaliteli bir Holz-Her 1329 Multi kenar bantlama makinesi ve beraberinde Return-Master 5920 dönüş sistemi satıyoruz. Makine 4 yaşında olup mükemmel durumdadır. Orijinal Yeni Fiyatı: €138.000 + KDV Bizim Fiyatımız: €69.000 + KDV (%50 tasarruf) Neden bu makineyi tercih etmelisiniz? Sübvansiyonlu bir birimle aynı fiyata, ancak evrak işleri, bürokrasi veya uzun vadeli teşvik başvuru yükümlülükleri olmadan, premium ve az kullanılmış bir makine alın. Dujdsygrghepfx Almjt Bakım: Düzenli olarak uzman Dimpex teknik ekibi tarafından servis edilmiştir. Performans: Çok yönlü üretim gereksinimleri için yüksek donanımlı "Multi" versiyon. Lütfen yalnızca ciddi alıcılar iletişime geçsin.

Koşul: ikinci el, Üretim yılı: 2023, Used machine Year of manufacture: 2023 177 operating hours Features and technical data: Dujdjy Rgwqjpfx Almst Edge Control PPC 322 W control system with 21.5" 16:9 color touchscreen with ECO MODE energy saving mode Motorized pressure beam adjustment Extendable workpiece support 600 mm Extension for extendable workpiece support 3-color LED light at infeed Motorized adjustment of infeed fence Long infeed fence Air cushion table BS 301 iTronic package Jointing milling unit FG201 with 2 milling heads, 64 mm high Edge feeder 1903 Adhesive application system GluJet GJ 301 automatic glue height adjustment (sensor nozzle) Magazine for 4 cartridges GluJet collection container Pressure unit DW 301 with motorized NC axis Spraying device GM301 after pressure unit with lubricant for high-gloss edges End trimming unit 1918 pneumatic (60 mm) Extraction hoods for end trimming unit Milling unit FR301 MOT6 Corner copying unit FF 301 MOT 1 incl. motorized horizontal axis adjustment Adjustable shelf program Scraping unit ZK301 MOT4 with high-gloss package Surface scraper FK701 Complete spraying unit for separating and cleaning agents Buffing unit Availability: short-term Location: Flörsheim

Koşul: yeni, Üretim yılı: 2024, New machine Year of manufacture: 2024 (arrived in 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Technical data: Edge thickness, coil material: 0.4 – 3 mm (material-dependent) Edge thickness, strip material: 0.4 – 8 mm (material-dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (Limitations may apply to individual units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: • Motorized pressure beam adjustment • Extendable workpiece support XL, 600 mm spacing • 3-color LED entry light • Motorized infeed fence adjustment • Long infeed fence 1252 mm • I-Tronic package • Edge Control PPC 322 W control system • IntelliSet: intelligent tool correction • f.a.s.t = fast setting technology • ECO-Mode energy-saving mode • Prepared for RETURN integration (third-party brands) • Guide system BS 501; right-angle infeed of workpieces for edge banding of narrow parts on end faces - Workpiece thickness: min. 10 mm - Workpiece thickness: max. 60 mm - Workpiece length: approx. 140–450 mm • Jointing milling unit FG201 with two milling heads, 64 mm high • Edge feeding MG 301 • Glue application system GluJet GJ 725 NC PUR PRO - Automatic glue height adjustment via dosing sleeve and sensor nozzle to compensate for panel tolerances - NC axis for height adjustment - Swivels 90° for easy cleaning of the GluJet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, - allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently from the machine's power supply and automatically compensates any vacuum loss. - Full control of PUR! • Pressure unit DW 301 with motorized NC axis; first roller driven with pneumatic immersion control, two conical pressure rollers • Spray device GM301 after pressure unit with lubricant for high-gloss edges • Pneumatic end trimming unit KA 501 (60 mm) • Extraction hoods for trimming unit • Multi-function milling unit FR301 MOT6 • Shelf program • Contour milling unit FF 301 MOT1 Duedpsy Nuf Tjfx Almst • Scraper unit ZK301 MOT4 including high-gloss package • Surface scraper FK702 • Complete separation and cleaning agent spray unit • Spray device GM 301 after pressure unit (high-gloss edges) • Buffing unit SW 501 Piping above the machine is not included in the scope of delivery Availability: Short notice Stock location: Hochheim

Koşul: ikinci el, Üretim yılı: 2009, HOLZ-HER kenar bantlama makinesi CONTRIGA 1366 Kenar kalınlığı: 0,4-30 mm (ekipmana bağlı olarak) Kenar yüksekliği: 51/66 mm (ekipmana bağlı olarak) Panel kalınlığı: 6-45/60 mm (ekipmana bağlı olarak) Kenar tipleri: Rulo ve şerit malları Besleme hızları: 12-30 m/dak'lık kademesiz besleme (ekipmana bağlı olarak) dergi alanında ayarlanabilir besleme seviyesi (maksimum ayar aralığı 30 mm) büyük alt kenar çıkıntısını değiştirmek için yüksekliği ayarlanabilir dergi plakası Ø 800 mm'ye kadar kenar ruloları için taşıma zinciri dahil Ø 820 mm şarjör plakası. En kısa iş parçası sırası için pnömatik kilitleme silindiri ile motorlu, konum kontrollü köprü yükseklik ayarına sahip otomatik merkezi yağlama, uzatılabilir iş parçası desteği (uzatma genişliği 1600 mm) tüm makine üzerinde yerden tasarruf sağlayan, pnömatik kontrollü kayar kapaklar (Bireysel üniteler için sapmalar mümkündür) Tüm bağlantı ve cıvataları yağlamak için enjeksiyon yağlayıcılı motorlu besleme cetveli (çalışma saati sayacı dahil) Emiş için merkezi bağlantı (2x Ø 200 mm) Makinenin sonunda entegre talaş toplama kutusu ile (eğer yarıçap kazıyıcı ünitesinin takılması) Kontrol PPC 231 - Verimli kurulum ve dönüştürme için Power PC - Dokunmatik ekranlı 15" SVGA ekran - 128 MB CF hafıza kartı - Kart üzerinde USB konektörü - Ethernet ağ bağlantısı - Kart üzerinde klavye konektörü - Windows benzeri kullanıcı arayüzü - tüm bilgiler düz metin ve/veya grafikseldir - döner - ve göz hizasında döner kontrol paneli - Yumuşak tuşlara (basmalı düğmeler) sahip toz geçirmez membran klavye - Ünite ön seçimi için LED ekran - Program adları ve numaralarının bulunduğu program listesi - Kapsamlı program belleği - Set noktaları, rota noktaları ve araç düzeltmeleri için temel ayar seçenekleri ve sabit rota noktaları işlevlerine sahip birimlerin bireysel seçimi - Üniteler ve eksen ayarları için hassas ayarlama yoluyla merkezi ve net kurulum süreçleri (ekipmana bağlı olarak) - En kısa iş parçası mesafesi için aralık gösterimi - Entegre rota kontrolü - Rota noktaları genel olarak veya programa özel olarak kontrol edilir - Tüm işletim verilerinin net ve eksiksiz kaydı Veri - Düz metin olarak servis mesajları - Teşhis sistemi - Ünite kontrolünde yüksek hassasiyet için entegre senkron veri yolu sistemi dahil - Parola koruması dahil olmak üzere on kullanıcıya kadar bireysel yönetim - Çevrimiçi bakım (isteğe bağlı), HOLZ-HER Servisi ile veri alışverişi - Barkod arayüz (isteğe bağlı) BASIC MAKİNA CONTRIGA 1366 - Kayış köprüsü Temel makine için seçenekler ve aksesuarlar Giriş ve çıkış alanı için püskürtme cihazı 1856 Giriş alanı için: Ayırma maddesi Riepe-LPZ/II ile elektronik olarak kontrol edilen ayırma maddesi püskürtücüsü Çıkış alanı için: Riepe-LP163/93 temizleme maddesine sahip elektronik kontrollü temizleme maddesi püskürtücüsü (sadece 1961 derz frezeleme ünitesi ve yüzey kazıyıcı ile birlikte) 1964) Derz frezeleme ünitesi Derz frezeleme istasyonu 1803 (2x 2,6 kW, 200 Hz, 12000 dak-1) İki dalma kontrollü frezeleme ünitesiyle 1 ünite ters dönüşte 1 ünite senkron dönüşte Statik frekans dönüştürücü 200 Hz ile dalma yolu 5 mm frezeleme aleti olmadan, hızlı alet değişimi için ProLock vidalı kelepçe ile 1803 için alet (iş parçası yüksekliği 60 mm'ye kadar) Elmas kesici PRO UT 2 parça (ön ve arka) koruyucu kapaklar dahil Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x sol dönüş, 1x sağ dönüş Entegre talaş kılavuzuna sahip gürültüsüz kesici DFC Teknolojisi (Leitz sistemi) 60'ta talaş kaldırma maks. 2 mm Dodpfovvkfdsx Almout

Koşul: ikinci el, Üretim yılı: 2009, Otomatik merkezi yağlama Freze ünitesi 7833 2 kademeli, 11 kW güç 1000 - 24000 dev/dak X yönünde 1 adet çift delme mili X yönünde kesme/kanal açma için 1 adet entegre testere ünitesi, hareketli Takım değiştirici 7892, 16 yollu doğrusal alıcı değiştirici, makinenin sağ tarafına sabit montaj Lazer işaretçi en iyisi. vakumlu vantuzların konumlandırılması veya iş parçası konturunun izlenmesi için 2 lazer işaretçiden oluşan otomatik konsol - vantuz konumlandırma 6 konsol, konsol başına 3 vantuz tutucu dahil 1 vakumlu vantuz dahil vantuz tutucu başına 80x80 mm 4 yükleme yardımcısı dahil 6 konsol için ön tarafta ek işleme alanları çerçeve sıkıştırma sistemi 7974 için temel ünite pnömatik (6 konsol) 2D barkod tarayıcı işleme kafasında video kamera vakum pompası 140 m³/h Vario takım değiştirme değiştirme ünitesi paketi şunlardan oluşur. kaynak: Vektör ekseni 7899 (C ekseni) tam interpolasyonlu 0-360° sonsuz dönebilir dahil. pnömatik takım değiştirici 7890, makine gövdesinin önünde sol tarafa sabit olarak monte edilmiş 1 yönlü şarjör alma sistemi, takım değiştirici 7894, Vario Tool Change takım tutucuları için özel olarak 6 yönlü alma şarjörü, makine gövdesinin sol tarafına sabit olarak monte edilmiş, Vario Grip KSJ F 40 3 adet pens tutucu ile donatılabilir. Takım tutucular Vario Grip KSJ F 40 (2-20 mm ER32 pensler için) 1 adet testere bıçağı tutucu 3 adet Müşteri seçimine göre pensler 1 adet. HW dairesel testere bıçağı max. Çapı 220 mm. Depolama yeri: Nattheim Djdpfjvvi Spjx Almout

Koşul: ikinci el, Üretim yılı: 2001, Fonksiyonellik: tamamen fonksiyonel, iş parçası yüksekliği (maks.): 45 mm, iş parçası genişliği (maks.): 60 mm, iş parçası uzunluğu (maks.): 180 mm, kenar kalınlığı (maks.): 8 mm, yükseklik ayar tipi: mekanik, X ekseni ilerleme hızı: 11 m/dak, tahrik tipi: pnömatik, toplam yükseklik: 1.640 mm, toplam uzunluk: 3.700 mm, toplam genişlik: 1.940 mm, toplam ağırlık: 830 kg, Donanım: CE işareti, dokümantasyon / kılavuz, Bu ikinci el HOLZ-HER 1310-1 kenar bantlama makinesini, 2001 model, satışa sunuyoruz. Model: 1310-1 Seri numarası: 126 / 0-106 Üretim yılı: 2001 Çalışma basıncı: 6 bar Duodpfxjy Hfq Ue Almot Sorularınız varsa veya daha fazla bilgiye ihtiyacınız olursa, lütfen bizimle iletişime geçin ya da bizi arayın.

Koşul: ikinci el, Üretim yılı: 2006, Used machine Year of manufacture: 2006 Condition: completely refurbished Features and Technical Specifications: - Equipped with a new glue application system - Infeed fence manually adjustable - Milling unit 1961 - Edge feed unit 1903 - Glue application station 1906 with sensing nozzle - Pressure unit 1816, pneumatic - End trimming unit 1822 - Milling unit 1942 M (radius, chamfer, flush) - Complete blow nozzle - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Suction hood set - Complete safety covers - Overall length: 5,291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edging thickness depending on configuration: 0.4–5 mm - Edging height max.: 55 mm - Edging strip length: min. 350 mm - Edging overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Extraction: - Jointing/milling unit: 900 m³/h - Milling unit: 280 m³/h - Scraper unit: 280 m³/h - Static negative pressure: - Jointing/milling unit: 1,490 Pa - Milling unit: 1,650 Pa - Minimum air velocity: 20 m/sec - Jointing/milling unit connection: 70 mm - Scraper connection: 70 mm - Compressed air: 6 bar Djdjwka H Sopfx Almeut Availability: short-term Location: Röllbach

Koşul: ikinci el, Üretim yılı: 2019, Used machine Year of manufacture: 2019 Features and technical data: - Designed for classic nesting machining with wear plate - Machine frame in welded construction with ground and hardened prism guides for gantry, aggregate head, and consoles - Gantry-style portal - Helical rack-and-pinion drive in X and Y directions - Precision ball screw in Z direction for accurate positioning - Machining dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. travel distances: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table surface (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid pattern - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum zones: 1-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-formation - 5+4 in X and 4 in Y direction - 32 mm pitch - Max. drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depending on panel thickness) - Spindle stroke: 70 mm - Alternating right-/left-hand rotation - n(max): 1000 – 4400 rpm, stepless adjustment - Interface: M10 thread, 11 mm fitting - Without tools and holders - 6 horizontal spindles: - 2 double drilling spindles in X direction - 1 double drilling spindle in Y direction - Interface: M10 thread, 11 mm fitting - Max. total drill length: 63 mm from mounting end - Without tools and holders - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1000 – 24,000 rpm, stepless adjustment - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand tools) - With collet chuck with HSK shank - Ceramic ball bearings (hybrid) - Max. tool weight: 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety housing in accordance with CE standard - Side and rear safety fencing - Vacuum pump: 500 m³/h, dry-running - Personnel safety via light barriers in the front machine area - Handheld operator unit for remote machine control with the following functions: - Start/stop machining program - Adjust machining cycle speed - Reset button Duodpfjwka Upsx Almet - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software, single machine license, includes: - CAMPUS NC-HOPS: - Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by overpressure in each linear guide carriage

Koşul: ikinci el, Holzher Sprint 1317 edge bander pre-milling cutters glue application, glue cartridge pneumatic pre-cut guillotine pressure rollers trimming saws top and bottom milling units Dedpfxex Tf D Uj Almeut corner rounding profile scraper flat scraper Max. edging height (mm): 50 Edgeband thickness in roll: 3mm feed speed: 10m/min The machine requires servicing as well as setup and adjustment. The machine can be switched on, all units power up, but the front saw does not respond to the material and the corner rounding unit needs adjustment.

Koşul: ikinci el, Üretim yılı: 2019, Used machine Year of manufacture: 2019 Condition: Good (The machine has undergone extensive annual maintenance. Last serviced in March 2026!) Equipment: - iTronic – Adaptive pressure and adhesive quantity control, automatic, program-dependent fine adjustment - SPS motorized infeed fence adjustment - Automatic chain lubrication: Intelligent, automatic transport chain lubrication system - Edge Control 19 control unit - EL GRM GRADUAL 400V50HZ 2.2KW V2 SPRINT 1329 PERFORMANCE 400V50HZ - Edge Control 19 control unit with 18.5" touchscreen color display in 16:9 format - ECO MODE: Energy saving mode, an automatic standby feature - Jointing milling unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) Dusdpfxjy Hyl Te Almot Includes 2 milling units for jointing the panel edges. - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left rotation Air Stream System (HOLZ-HER / LEUCO patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right rotation Air Stream System (HOLZ-HER / LEUCO patent) - Edge feeding system 1901 SYNCHRO Automatic feeding of rolls and strips - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS MOTOR SPRINT MOTORIZED - Spray system GM501 after pressing station with lubricant Recommended for high-gloss edges - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm), pneumatically tiltable 0/10° - Milling unit FR701 100% repeat accuracy at the push of a button due to zero-backlash mechanics - Air Stream System Multi cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701 100% repeat accuracy at the push of a button due to zero-backlash mechanics - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package, with motorized adjustment of the sensing rollers - Carbide reversible knives for scraper holders, R = 2.0 mm (2 pcs required) - Flat scraper FK701 With pre- and post-sensing for removing glue residue - Spray system TR501 for infeed and outfeed (separator + cleaning agent) - Including nesting shoes on lower side with dedicated spray system Location: Hesse Availability: Approx. July 2026

Koşul: ikinci el, Holz Her Auriga 1308 FÜ + PU Compact version – Edge thickness 0.4–6 mm SPS touchscreen control Edge-Control PPC 221 color display Pre-milling unit for preparing edges before gluing Fully automatic edge magazine for roll and strip material GLU-JET adhesive application station for EVA and PUR adhesives, cartridge or granulate + PU Adhesive application using nozzle technology Workpiece height 6–65 mm Automatic glue height adjustment 1912-3 pneumatic pressure section 1918 pneumatic end trimming unit for rolls and strips up to 8 mm edge thickness With pneumatic adjustment of trimming saws from 0–10° inclination 1827 MOT 4 milling unit, flush milling 8 mm, radius milling – bevel milling – 15° 1827 MOT NC axes via control panel 1832 programmable (PLC) corner rounding unit for edge thicknesses up to 3 mm in throughfeed Scraper unit for bevels and radii with 2 MOT scraper holders Surface scraper unit – finishing Dsdpoyyl U Hofx Almjut Spraying device – PU Complete DIA tool kit included Very few operating hours / from a craft business Machine is WORKSHOP-REFURBISHED and in TOP CONDITION Available from stock in Lieboch

Koşul: ikinci el, Üretim yılı: 2006, Fonksiyonellik: tamamen fonksiyonel, çalışma saatleri: 0 h, giriş voltajı: 380 V, toplam yükseklik: 1.700 mm, toplam uzunluk: 5.700 mm, toplam genişlik: 1.150 mm, toplam ağırlık: 1.500 kg, We are offering this fully operational HOLZ-HER SPRINT 1312 edge banding machine, year of manufacture 2026. Dedpfjy Ir Ayox Almsut Model: 1312 Equipment number: 1337/0-506 Serial number: 5002547 The machine will remain in use until mid-May and will then be replaced by a new one. The machine can be tested at any time, even though it is located in an outbuilding. Loading with a forklift is possible without any issues. Self-collection only. If you have any questions or need further information, please feel free to send us a message or call us.

Koşul: ikinci el, Üretim yılı: 2010, toplam yükseklik: 2.580 mm, toplam uzunluk: 5.500 mm, toplam genişlik: 1.500 mm, Weight: 1,500 kg Price: On request - Year of manufacture: 2010 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 161/1-10 - Number of units [pcs]: 7 - 1st unit type: Pre-milling unit - Tools included: Yes - 2nd unit type: Gluing unit - 3rd unit type: Pressure rollers - Tools included: Yes - 4th unit type: End trim unit - Tools included: Yes - 5th unit type: Rough milling unit - Tools included: Yes - 6th unit type: Corner rounding unit - Tools included: Yes Djdjyu Tkkspfx Almout - 7th unit type: Flat scraper unit - Tools included: Yes - Voltage [V]: 400 - Power consumption [A]: 38.85 - Fuse [A]: 50 - Transport dimensions: 5500mm x 1500mm x 2580mm (L x W x H) - Transport weight [kg]: 1500kg - Number of transport packages: 1 Financial Information VAT: The indicated price is exclusive of VAT VAT/Margin taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Koşul: iyi (kullanılmış), Üretim yılı: 1997, Fonksiyonellik: tamamen fonksiyonel, - PVC Primus, 3 mm PVC kartuş sistemi - Yüzeye yapıştırma, hizalama testeresi, hizalama frezeleme, pah frezeleme, yarıçap frezeleme - Çek kılıcı, parlatma ünitesi Duedpowv Uq Aefx Almet - Ölçüler: 4700 x 1400 x 1650 mm - Ağırlık: 1300 kg - İş parçası ölçüleri: Uzunluk: 4500 mm Derinlik: 1020 mm Yükseklik: 1630 mm - Bağlantı ağzı: 140 mm çap - İş parçası genişliği: min. 60 mm - İlerleme hızı: 11 m/dk - 6 bar - 400 Volt basınçlı hava - Şerit malzemede kenar kalınlığı 8 mm, rulo malzemede 2 mm - ÖN FREZE ÜNİTESİ YOKTUR - Yeni pnömatik silindirler Nakliye ek ücret karşılığında mümkündür.

Koşul: ikinci el, Üretim yılı: 2011, toplam yükseklik: 1.730 mm, toplam uzunluk: 6.100 mm, toplam genişlik: 1.440 mm, Color: Grey Weight: 2,500 kg - Year of manufacture: 2011 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 5/1-107 - Number of units: 9 - 1st unit type: Pre-milling unit - Tools included: Yes - 2nd unit type: Glue application unit - 3rd unit type: Pressure roller unit - Tools included: Yes - 4th unit type: End trimming unit - Tools included: Yes - 5th unit type: - Tools included: Yes - 6th unit type: Corner rounding unit - Tools included: Yes - 7th unit type: Radius scraper unit - Tools included: Yes - 8th unit type: - Tools included: Yes - 9th unit type: Flat scraper unit - Tools included: Yes - Voltage [V]: 400 Dusdpfxjyf Dako Almet - Power consumption [A]: 21.9 - Fuse [A]: 50 - Transport dimensions: 6100mm x 1440mm x 1730mm (L x W x H) - Transport weight [kg]: 2,500kg - Number of transport packages: 1 Financial Information VAT: The stated price is net, plus VAT VAT/differential taxation: VAT deductible for businesses Delivery and trade-in available at any time for all industrial equipment Yorick Diebels

Koşul: ikinci el, Üretim yılı: 2001, Minimum/maximum workpiece thickness: 6/45 mm; Edging thickness: 0.4 - 3 mm; Maximum edging height: 51 mm; Minimum edging strip length: 350 mm; Maximum edging projection per side (height): 3 mm; Minimum workpiece width: 60 mm; Minimum workpiece length: 180 mm; Total length: 3700 mm; Width: 1440 mm; Maximum height: 1970 mm; Workpiece infeed height: 850 mm; Weight: approx. 850 kg Duodsy Dd Iyopfx Almst Location: Supplier

Koşul: ikinci el, Holz Her UNO 1303 + PU Edge thickness: 0.4 - 3 mm (6 mm) Control panel with selector switches for adjusting the units Fully automatic edge magazine for rolls and strip material Gluing station: Cartridge + PU adhesive application Workpiece height: 6-55 mm Pressure unit: pneumatic End trimming unit for rolls and strip material up to 3 mm (6 mm) edge thickness Adjustable end saw angle from 0-10° Milling unit: flush trimming, radius trimming, 15° chamfer trimming Dsdpfxeywh A Ie Almout Scraper unit for chamfers and radii Flat scraper unit for finishing Machine is INSPECTED and in TOP CONDITION from a very well-maintained craft business Available ex-stock Lieboch