Işleme merkezi

MAKA HC-55-TBZ

Used Machine
MAKA CNC Door Processing Center HC 55 TBZ
Year of manufacture: 2000

Door processing center for machining interior doors (hardware routing, light cutouts, peephole routing, etc.)
CNC control BWO 900C, with 1 MB memory, integrated PC.

Working ranges:
For door width: 250 – 1,280 mm
For door height: max. 2,500 mm
For door leaf thickness: max. 80 mm
Rapid traverse speed:
X / Y-axis: 45 m/min
Z-axis: 10 m/min

1 universal milling unit SK40
With integrated A-axis swivel 190° (+/- 95°), along the X-axis for lock/hinge processing on both sides along the longitudinal door edge directly with the unit.
Milling spindle, water-cooled, rated power 8 kW, available from 7,000 rpm, stepless speed control from 1,000 to 17,100 rpm, SK40 tool holder for automatic tool change.

1 chain-type tool magazine with 24 slots, for tools up to Ø 90 mm, for sorted placement up to max. Ø 160 mm, located at the output position of the unit. Tool total length max. 200 mm from spindle mount.
Godpfxsv S Dn Ds Apqsiu
Milling spindle and 2 x magazine slots equipped for the use of angle/touch probes with torque support.

Machine table with width adjustment via program, and with width measurement for edge finish machining to ensure constant routing depth on both sides.

1 set of infeed rollers for manual loading, automatically liftable and lowerable.
1 longitudinal stop with pneumatic lift, mounted travelling on the unit, for positioning to door length and thickness.
4 pneumatic side stops, swing-in type, for doors with veneer/face panel overhang up to max. 15 mm, with selectable height adjustment for changing stop heights for finished doors (single/double rebate doors).
2 vacuum clamping lines, each with 5 vacuum cups, 130 / 200 x 70 mm, with touch valve and blow-off device. Per line, 3 vacuum cups lowerable according to the processed door height.

1 vacuum pump approx. 128 m³/h suction capacity, with 250-liter buffer tank, for rapid vacuum build-up.

Automatic central lubrication, free-standing control cabinet with climate unit.
Occupational safety: bumpers on both sides of the gantry, side protective fencing.

Various tools and tool holders may be taken over by separate arrangement.
The machine can be inspected in Hermaringen.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.