Şerit testere - yatay

MEP SHARK 282 SXI - Evo

Cutting diameter 250 mm
Cutting range at 90 degrees, flat: 280 x 220 mm
Cutting range at 90 degrees, square: 220 x 220 mm
Vise width: 285 mm
Blade speed range: 36/72 m/min
Saw blade dimensions: 2950 x 27 x 0.9 mm
Total power requirement: 1.5 / 1.8 kW
Machine weight approx. 485 kg
Required space approx. 1700 x 1000 x 1800 mm
Electrohydraulic semi-automatic bandsaw SHARK 282 SXI EVO
with semi-automatic-dynamic and manual functions, featuring MEP-28 control
for miter cuts from 45° right to 60° left.

Semi-automatic function:
At the start of the cycle: - Vise closes and motor starts
– Saw frame lowers for the cut – Motor shuts off – Saw frame lifts – Vise opens.

Semi-automatic dynamic system (manual lowering of the saw head to the desired position and cycle start via hand button).

Key Features:
• New centralized control console on an articulated arm, allowing the operator to control the machine easily from any working position.
• Low-voltage control panel:
- Polyester membrane keypad with thermoformed, raised keys and actuation feedback signal.
- Display shows:
* Diagnostics (messages in user language)
* Alarms (causes of alarms described)
* Input and output status
* Cut counter
Bedpfxefg E H Sj Almslg
* Time taken for each cut
* Saw motor current consumption
* Saw blade tension
* Saw blade speed
* Numeric display of head position
• IP55-rated manual cycle selector switch (24 V)
• Complete program for all special cutting cycles
• Capability to establish additional special cutting cycles for specific applications
• New generation, highly efficient hydraulic control unit with low energy consumption
• Large work area with turntable on roller bearings, 265 mm with preloaded thrust bearings installed
• Dual blade speed (36/72 m/min) controllable
• Prepared for installation of an electronic inverter for stepless blade speed adjustment from 20 to 90 m/min
• Saw bow stroke programmable directly from the control panel, for adaptation to the workpiece material
• Clamping device laterally adjustable to left and right, with quick-release vise
• Manually operated blade tension monitoring with display on the screen via electronic converter
• Base frame with pull-out coolant tray
• Electric coolant pump for saw blade lubrication and cooling
• Prepared for installation of minimal lubrication kit for the saw blade (optional), in addition to standard emulsion oil lubrication
• Chip removal brush
• Machine suitable for pallet truck transport
• Length stop for consistent length cuts
• Material support arm with roller, for securing the loading table
• Bimetal saw blade for solid and profile materials
• Includes tools and operating instructions in the respective user's language.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.