Teleskopik yükleyici

Merlo TF 42.7 CS-136

Operating hours: 219, First registration: 16.01.2024

Maximum lifting capacity: 4,200 kg
Maximum lift height: 7,000 mm
Maximum outreach: 3,800 mm
Length to attachment carrier: 4,730 mm
Width: 2,310 mm
Height: 2,530 mm / 2,590 mm (with CS activated)
Total weight with forks: 8,170 kg
Total weight without forks: 8,000 kg
Engine: 4-cylinder Perkins 904J, 3.6 l displacement, water-cooled
Power: 100 kW (136 hp) at 2,300 rpm
Hydraulic reversing fan
Stage V
Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR)
Hydrostatic drive
Pump: electronically controlled with variable flow
Motor: variable displacement motor
EPD PLUS incl. optional automatic rpm increase
Hydraulic oil: mineral HVI 46
Transmission: 2-speed, electrohydraulic control
Vmax = 16 / 20 km/h in 1st / 2nd gear, optional 40 km/h
Cabin: enclosed cab, split door
360° all-around visibility
GRAMMER air-suspended seat with lap belt
ROPS/FOPS certified
Heater
Front, roof, and rear wipers
Sunblind
4x1 electronic joystick with capacitive release including direction selector switch
CS = hydropneumatic cab suspension
Telescopic boom, 2-section, with electronic end-position damping (Soft Stop)
Attachment carrier quick-change system
Type "ZM2" hydraulically controlled from cab
Steering: hydraulic
3 steering modes: all-wheel, front-wheel, crab steering
Drive: permanent all-wheel drive
Axles: fixed front axle, oscillating rear axle
Brake system: power-assisted disc brakes on all four drive shafts, automatically acting parking brake at engine stop
Frame made of high-strength steel
Hydraulic system: variable displacement pump, "LOAD SENSING" type
Flow rate working hydraulics: 151 l/min
Flow rate hydraulic fan: 46 l/min
Total flow: 197 l/min
Working pressure: 250 bar
Flow-sharing control block
Electrics: 12 V
Battery: 100 Ah
Alternator: 120 A
Stabilization control: simplified Merlo ASCS system (ASCS-light) with full electronic stability control, audiovisual signal, implement recognition, and overload cut-off
Tires: 460/70 R 24
Standard equipment:
- Servo brake
- Hydraulic oil cooler
- Rear plate for mounting trailer coupling
- Hydraulic reversing fan
- Radio preparation
- Work lights on cab (2 front, 2 rear)
- Preparation for auxiliary function at boom head
- 2 hydraulic connections at boom head
- Load protection grille on attachment carrier
- Road travel lighting
- Automatic main battery switch
- Electrical cable in boom
Nodpfx Ajpcht Heb Uelg
- Audible signal when reversing
- Boom support for safety
Optional equipment:
- EU road approval as tractor/agricultural tractor 40 km/h incl. automatic trailer coupling, self-locking, 30/32 mm pin, including trailer lighting socket
- Air conditioning
- Boom suspension (BSS)
- LED work lights on cab (2 front, 2 rear)
- 2 work lights at the end of the first boom section (main boom)
- ASCS upgrade: screen with all ASCS functions + data...

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.