İş mili presi

Mez Stroje s.r.o elektrische Rotorpresse

Technical details:

Hedpsyya Ibofx Ac Ejk
Pressure: 5 t
Column gap: - mm
Installation height: 60 mm
Rated power: 8 kVA
Table height adjustment: 60 mm
Compressed air: 6 bar
Supply voltage: 400 V
Electrical specifications - Voltage/Frequency: 400/50 V/Hz
Total power: 4 kW

SERVO-MECHANICAL SPINDLE PRESS
Machine is programmable!

DESCRIPTION OF THE MACHINE
2 machines available
MACHINE: Electrically driven press with a pressing force of 50,000 N
The machine is designed for pressing bearings and rubber seals.
It features a welded L-shaped frame.
A movable press table is located on the horizontal arm, which can be manually positioned along linear guides.
In the front position, the table can be manually locked in place with a spring-loaded pin.
In the working position (below the press head), the table is automatically locked by a pneumatic cylinder.
Only in this position can the press head be lowered using two-hand control.
The control panel is equipped with two-hand buttons, an emergency stop switch, a table lowering button, and power selector switches 1,2.
The pressing force can be set via potentiometers in the control cabinet. Here, two force levels and the corresponding pressing speed can be configured.
The press head moves along the vertical arm of the press, also guided by linear rails. The head is driven by a ball screw, which is powered by an electric motor with gearbox via pulleys and a timing belt.
The entire machine is mounted on a table made of aluminum profiles.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.