Plazma kesme makinesi

Microstep Mastercut Eco Plus 3001.15

Microstep Mastercut Eco Plus 3001.15,
Duedpfx Aoyzy S Aeagor
Year of manufacture: 2016,
IMSNC control,
Burning table: 3000 x 1500 mm,
Exhaust duct left/right,
Plasma source: Kjellberg Hi Focus 161i, adjustable 10 - 160 A,

Power Source HiFocus 161i PLUS
• Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control
• Optimal process control through extremely fast regulation of cutting current
• Monitoring of process sequence for torch cooling, ignition time, pilot arc time, short-circuit time during torch ignition, and power source
• Operating status and error indication via LED and display
• Analog and serial interface for adaptation to CNC controls
• Stepless adjustment of cutting current from 10 - 160 A, and for marking from 5 - 25 A
• Optimal piercing through stepless delay time for main arc and adjustable current ramp-up
• Adjustable current reduction on corner, start, and end signals from the guidance system
• Automatic display of preset cutting current
• Serial data transfer for PC diagnostics

Plasma Cutting Technology Contour Cut
• Further development of HiFocus technology for carbon steel
• Optimized for cutting fine internal and external contours
• High cut quality and contour accuracy
• Holes with angular deviation according to DIN EN ISO 9013 in range 2-4
• Low angular deviation and smooth cut surfaces
• Very high repeatability and dimensional accuracy
• No time-consuming rework required—high productivity, low operating costs
• No additional equipment, software, or new wear parts required
• Standard feature

Plasma Torch PerCut 200/210
• PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting
• PerCut 210 quick-change torch with threaded lock for fast and convenient assembly
• Special torches are available for special applications
• Higher cutting speeds reduce cutting meter costs
• Long service life of consumable parts conserves resources
• Narrower kerf means less emissions and waste
• Significantly lower gas consumption compared to competitors due to efficient liquid cooling all the way to the nozzle tip
• Less gas consumption means comparatively lower noise level
• Bevel cutting up to 50 degrees with standard consumables
• Cutting and marking with the same consumable parts

Power source: HiFocus 161i
Mains connection: 400 V; 3-phase; 50 Hz
Max. input power: 28 kVA (100% duty cycle)
Main fuse, slow-blow: 50 A
Protection class: IP 22
Open circuit voltage: 330 V
Cutting current: 10 – 160 A (100% duty cycle)
Marking current: 5 – 25 A (100% duty cycle)
Cutting range: max. 50 mm, recommended 0.5 – 38 mm
Max. piercing thickness: 30 mm
Weight: 206 kg

Plasma machine torch: PerCut 200
Quick-change torch: PerCut 210
Clamping diameter: 50.8 mm
Plasma gases: O2, N2, Ar/H2
Marking gases: Ar
Swirl gases: O2, N2, Air, N2/H2 (F5)

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.