Silo yarı römork

O.M.E.P.S. CR 47

O.ME.P.S Tipping Silo Semi-Trailer----Type: CR 47

Chassis:
Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400 mm, kingpin 2", tipping cylinder: Hyva

Axles and Suspension:
Disc brakes 22.5" SAF axle aggregates 3x 9t with air suspension, axle distance is 2 x 1310 mm, raise and lower valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn

Rims and Tires:
6 wheels with tires size 385/65 R22.5, manufacturer’s choice, on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120

Brake System:
EBS 4S/2M WABCO pneumatic brake system with RSS, according to standard 98/12/EC - ECE R13/09, brake wear indicator connected

Landing Gear:
Mechanical landing gear with two speeds, 2x 20t support load with swing foot, rear without additional support

Electrical System:
All lights in LED design, 24-volt electrical installation consisting of: one 15-pin socket mounted ahead of the fifth wheel on the chassis beam, yellow side marker lights in prescribed quantity, rear position lights, front clearance lights, rear license plate lights, lights according to standard 97/28/EC-2007/35/EC, 2 multi-chamber rear lights mounted at turntable height in aluminum consoles to standard 97/28/EC-2007/35/EC, 1 LED work light on the tank, yellow warning light at rear mounted at hose tube height, 2x reverse lights in underrun protection, 2x reverse lights at landing gear height (each switchable on the power console)

Tank Assembly:
A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn) manufactured
A single-compartment tank with a volume of 47,000 liters, tank warranty: 24 months from delivery
Operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/EC. The wall thickness is approx. 5 mm, test pressure 3.0 bar - operating pressure 2.0 bar, operating temperature -40° to +80°

Filling Options:
4 manholes DN 450 with pivoting and folding dome lids. Dome lids are pressure-tight with 4 wing nuts each, rubber supports above for dome lid storage, drip edge closed at front, open at rear

Material Discharge:
1 material discharge cone DN 800 made of INOX, foldable with INOX disc for loosening, discharge cone swivels to the side, shut-off valve DN 150 with white gasket, connection: STORZ-A

Pneumatic Piping:
Rbsdpfx Aaox Nufmj Ajt
A 2.5" stainless steel air manifold mounted on the right operating side, a stainless steel air distribution pipe 4" mounted at the rear of the tank, air valves (shut-off flaps) in INOX, air supply and connecting hoses in 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the turntable

Ladder and Walkway:
1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail operable from below with separate folding ladder section, equipped with parking brake when open, 1 aluminum safety walkway led along the left top of the tank, anti-slip coating on the tank

Hose Carriage:
4 hose tube compartments 5 m length DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose compartment with compressor hose D.76

Accessories:
The side underrun protection is made of anodized aluminum design, left

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.