Çift çapraz kesim testere

Omga TRF 527 NC

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2014, Fonksiyonellik: tamamen fonksiyonel, DOUBLE GLAZING BEAD SAW TRF 527 NC FP CA MM.4000 (as per nameplate) Double mitre saw for simultaneous cutting of two glazing beads positioned one on top of the other. Right saw unit is fixed. Adjustment of the left unit according to the set cutting length, which can be read on a digital measuring display. Units are equipped with supports, allowing simultaneous cutting of 2 glazing beads. For cutting larger cross-sections, the upper support can be removed. After completion of the cutting process, the pneumatic clamping cylinders automatically swing aside to facilitate loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital measuring display • Pressure switch • 2 TCT saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool kit • Safety guards with horizontal, swiveling clamping devices • Two-hand operation • Belt drive • Pneumatic unit lift • Central support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 4000 mm • Min. cutting length 158 mm Hsdpfxoy Er Iko Anxjl • Weight approx. 290 kg • Space requirement (standard equipment) approx. 4,500 x 1,000 mm 1 set with 2 mechanical stops for setting up to 4 intermediate angles. Additional central support. 1 set of adjustments for rebated profiles 1 set of adjustments for rebated profiles according to drawing: - Add-on for the clamping devices to compensate for profile inclination - Spacers at the rear stops of the units and the center piece. In the sketch below (in green), a beveled pressure plate is shown, which follows the inclined profile and presses it against the (red-marked) spacer at the stop. Information subject to change.