Sütun matkabı

OPTIdrill D33 Pro Aktions-Set

Durum: yeni, Cutting capacity round 0°: 127 mm Cutting capacity flat 0°: 125 x 130 mm Cutting capacity round 45° right: 90 mm Cutting capacity square 45° right: 90 x 90 mm Cutting capacity round 60° right: 45 mm Cutting capacity square 60° right: 45 x 45 mm Vise opening: 130 mm Saw blade dimensions: 1440 x 13 x 0.65 mm Kdedpoilk Eksfx Apyjn Cutting speed: 60 m / min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Features: - Saw bow pivotable up to 60° - Ideal for machining pipes, profile materials as well as solid stainless steel, iron, etc. - Sturdy saw arm for low-vibration operation - Quiet operation due to robust construction - Automatic shut-off at end of cut via micro limit switch - Quick-release vise for easy and fast clamping of workpieces - Precise, adjustable saw blade guide for optimum cutting results - Environmentally friendly, as no lubricants or coolants are required - Ideal for use on construction sites due to low net weight - Base frame optionally available (not included in delivery) Equipment: - Saw blade 1440 x 13 x 0.65 mm - Material stop - Ergonomic handle Base frame available at extra cost: 129 Euro net (special price)

Durum: yeni, x-seyahat 300 mm y-seyahat 200 mm z-seyahat 350 mm masa boyutu 700 x 200 mm iş mili konik ISO 40 dönüş hızı aralığı - yatay 150 - 1660 U / dak dönüş hızı aralığı - dikey 110 - 1230 U / dak tüy stroku 120 mm mil sürücü 3,0 kW makine ca ağırlığı. 1,15 t makine ca boyutları. 1,31 x 1,38 x 1,65 m Kedpfxsfrzuns Apysdn

Durum: yeni, Üretim yılı: 2026, Horizontal band saw with a swiveling arm for cutting metals, allowing cuts perpendicular to the axis of the workpiece as well as at any angle from 0 to 60º. The material can be fed either manually or by any mechanical feeding device, with automatic feed of the tool. The blade guides are fitted with dedicated carbide plates and bearings, which has a significant impact on blade guidance, durability, cutting straightness, and overall cutting accuracy and quality. The machine arm is made of profiled CAST IRON. The control panel is located next to the arm. The drive from the electric motor to the saw band’s drive wheel is transmitted via a motor with a worm gear. The cutting blade is tensioned between two cast iron wheels using a manual tensioner and guided by an adjustable rolling and linear carbide guide set. Inside, there is a separate coolant reservoir with an electric pump. The arm lowering speed (cutting speed) is controlled by a hydraulic actuator. Feed rate is managed via the control panel. Two band speeds are available: 36 and 72 m/min. In the rest position of the arm (after the cutting process), the band drive is automatically switched off. Safety is provided by blade guards and microswitches that stop the motor at the end of the cutting cycle or upon opening any of the guards; additional protection includes automatic cut-off of the band saw in the event of blade breakage. Technical specifications Band saw dimensions 2455×27×0.9 mm Blade tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic actuator Vice base height 900 mm Power supply 3-phase 400 V Motor power 1.1 kW Net/Gross weight 220 kg / 284 kg Warranty 12 months Manual yes Kodpfx Apsvuf S Neyjdn CE Declaration yes Cutting capabilities (diameter/rectangular/square): Angle Round Rectangular Square 0º ø230 260×150 mm 225×225 mm 45º ø165 180×130 mm 165×165 mm 60º ø105 100×90 mm 110×110 mm *Please note: the machine is supplied by default without a CEE plug, as there are several different types. If you wish to receive a suitable plug with your machine, please contact the seller prior to purchase or when placing your order.

Durum: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, giriş voltajı: 400 V, giriş akımı türü: trifaze, kontrol tipi: manuel, toplam yükseklik: 1.900 mm, toplam uzunluk: 1.950 mm, toplam genişlik: 750 mm, toplam ağırlık: 230 kg, Donanım: CE işareti, devir hızı sonsuz değişken, dokümantasyon / kılavuz, Technical Parameters Built-in cooling system: Yes Saw blade size [mm]: 2455 × 27 × 0.9 Blade tension: mechanical (manual) Blade speeds [m/min]: 36, 72 Feed rate [m/min]: 0–50 (stepless) Saw arm descent adjustment: stepless – hydraulic cylinder Vice base height [mm]: 1010 Power supply: 3-phase 400 V Motor power [kW]: 1.1 Dimensions [mm]: 1950 × 750 × 1900 Weight [kg]: 230 Warranty: 24 months Operating manual: Polish language CE Declaration of Conformity: Yes Product Description The horizontal metal bandsaw with a pivoting saw arm enables cuts both perpendicular to the axis of the workpiece as well as at any angle within the range of 0° to 60°. The material to be cut can be fed manually or using any mechanical feeding system, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings, which have a significant effect on the blade guidance, its service life, straightness, as well as the accuracy and quality of the cut. The saw arm, featuring a rigid construction, is made from profiled cast iron, ensuring high stability and low vibrations during cutting. The machine's control panel is located on the saw arm. The drive from the electric motor to the drive wheel of the saw blade is transmitted through a worm gear. The saw blade is tensioned across two cast iron wheels and guided by a manual tensioning mechanism as well as adjustable rolling and sliding carbide blade guides. Inside the machine there is a separate coolant tank with an electric pump, which increases the service life of the saw blade and improves the cutting quality. The descending speed of the saw arm (cutting speed) is regulated by a hydraulic cylinder, while the feed rate is set via the machine's control panel. Two saw blade speeds are available: 36 and 72 m/min. Ksdpjyr Ndhjfx Apyodn Once the saw arm reaches its lowest position (after cutting through the material), the saw blade drive automatically switches off. Safety is ensured by: - Saw blade guard covers - Micro switches that stop the motor when the cutting cycle is complete or a guard is opened - Automatic machine shutdown in case of saw blade breakage Application MTP BS260G bandsaws are professional machines suitable for cutting: - Steel profiles - Solid material and shafts They are equipped with a hydraulic cylinder, a cooling system, and a saw arm pivotable up to 60°. When used with high-quality saw blades from the German manufacturer Roentgen, they ensure precise, fast, and clean cuts. The machine is ideally suited for cutting: - Carbon steel - Alloy steel - Structural steel - Stainless steel - Acid-resistant steel Delivery to the customer is possible. Transport costs are calculated individually by the transport company.

Durum: yeni, Üretim yılı: 2026, The CORMAK BMS250 multifunctional brush and disc grinder is a modern, high-performance combination sanding machine, designed for industrial, workshop, and carpentry applications. By combining two functions—brush and disc sanding—this unit provides maximum flexibility and efficiency for processing metal, wood, and plastics. Equipped with premium-quality NSK bearings, this grinder operates exceptionally quietly, smoothly, and reliably over extended periods, setting it apart from competitors and ensuring professional-grade performance. The brush sander with base features a balanced rotor mounted on ball bearings and a powerful copper-wound motor, delivering high torque essential for intensive grinding tasks. An integrated 60 mm extraction port facilitates connection to a dust extraction system to enhance comfort and workplace safety. Additionally, the disc sander with base—the CORMAK BMS250—features an adjustable work support and IP54 protection, ensuring precision and operator safety. If you're looking for a reliable, universally applicable bench grinder, the BMS250 model will meet the expectations of even the most demanding users. Key Features: - Combination brush and disc sander – maximum functionality - Industrial-grade NSK bearings – quiet operation and long service life - Suitable for grinding metal, wood, and plastics – broad range of applications - Copper-wound motor – reliability and efficiency - 60 mm extraction connection – clean and safe working area - Stable base – user comfort and ergonomics Technical Specifications: GRINDING DISC SIZE: 250 x 32 mm DISC/GRINDING WHEEL BORE: 32 mm DISC GRIT: K 36 SPEED: 2960 rpm MOTOR POWER (S1): 0.9 kW MOTOR POWER (S6): 1.5 kW EXTRACTION PORT DIAMETER: 60 mm Kjdpfx Apexfgz Nsyjdn VOLTAGE: 400V DIMENSIONS: 600 x 400 x 1130 mm WEIGHT: 24 kg S1 – Continuous rated motor power under full load S6 – Rated motor power for intermittent operation with up to 40% idle intervals