Freze makinesi

Optimum F80 CNC

Machine is on display. Optimill F 80 CNC milling machine, direct from the manufacturer.

F 80 CNC – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control system stands out for its performance, speed, precision, and long service life.

• Column construction cast-iron frame for high rigidity
• Carousel tool changer with 12 tool positions
• All linear guides with stainless steel covers
• Automatic central lubrication
• Siemens main spindle motor
• Siemens servo drives on all axes (closed-loop system)
• Maximum spindle speed of 10,000 rpm
• Portable electronic handwheel with enabling switch and emergency stop slam switch greatly facilitates program set-up
• Coolant system with 70-liter coolant tank
• Tool changes are performed automatically or at the push of a button (electropneumatic tool clamping system)
• Heavy-duty, precision-milled table – large, robust, and with finely ground surface
• Extra-large access doors to minimize cleaning and maintenance time
• LED machine lighting for complete illumination of the workspace

SINUMERIK 808 ADVANCED
Compact and robust
Communicative
• Front panel USB (IP65)
Lsdeymkcuspfx Aa Isrh
• Serial interface RS232C
• RJ45 Ethernet on the rear

User-friendly
• Technology-specific keyboard layout
• Hard keys with protective membrane

Process-reliable
• LED tool number display
• MCP with rotary switches for feed-rate and spindle override

Full package
• RJ45 Ethernet port
• Prepared for remote maintenance
• AST function; allows easy optimization for higher requirements in dynamics and precision
• Absolute encoders / no reference run required
• Higher precision

• Dimensions and Weights
Length approx. 1995 mm
Width/Depth approx. 1930 mm
Height approx. 1640 mm
Weight approx. 2300 kg

Rapid traverse speed
X-axis: 20 m/min
Y-axis: 20 m/min
Z-axis: 20 m/min

Electrical Data
Connection voltage: 400 V
Line frequency: 50 Hz
Electrical connection
Total connected load: 12 kVA

Horizontal milling table
Length: 800 mm
Width: 260 mm
Distance vertical spindle – table min.: 100 mm
Distance vertical spindle – table max.: 550 mm
T-slot size: 16 mm
Number of T-slots: 5
T-slot spacing: 50 mm
Max. table load: 200 kg

Accuracy
Repeatability: ± 0.01 mm
Positioning accuracy: ± 0.01 mm

Coolant/Lubrication system
Coolant pump drive power: 450 W
Tank capacity: 80 l

Pneumatic connection
Operating pressure: 7 bar

Travels
X-axis automatic: 450 mm
Y-axis automatic: 260 mm
Z-axis automatic: 450 mm
Distance spindle – column max.: 370 mm

Vertical spindle
Spindle mount: BT 40
Speed range: 50 – 10,000 rpm
Note speed range: Please note, during continuous duty, the maximum spindle speed must be reduced by approx. 20%
Continuous output (S1) drive motor: 3.7 kW
Drive motor (S6-30% duty): 5.5 kW
Torque drive motor (S1 continuous): 24 Nm
Torque drive motor (S6-30%): 36 Nm

Feed motor torque
X-axis continuous duty (S1): 6 Nm
Y-axis continuous duty (S1): 6 Nm
Z-axis continuous duty (S1): 11 Nm

Tool changer
Design: Carousel
Number of tool stations: 12
Max. tool diameter: 95 mm
Max. tool length: 300 mm
Max. tool weight: 8 kg
Tool change time chip-to-chip: 7 s

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.