Boru hattı OTO 101.3 OTO MILLS / SEUTHE / THERMATOOL

OTO MILLS / SEUTHE / THERMATOOL Tube Mill OTO 101.3

OTO 101.3 Tube Mill Line

Manufacturers: OTO MILLS, SEUTHE, and THERMATOOL

The line is currently operational and can be inspected during production.

The line is equipped with:

- OTO MILLS entry section with double decoiler, end-to-end strip joiner (welder), and accumulator
- CANTI-SAG TWL RS90 forming, sizing, and Turk’s head units
- THERMATOOL 300kW High-Frequency Welder
- SEUTHE TS90 Flying Saw
- ATTL Automatic Packing Unit
- ITIPACK Strapping Unit
- OSU Metallizing System

Technical Data:

- Tube diameter: 32 – 101 mm
- Square tubes: 20 x 20 - 70 x 70 mm
- Rectangular tubes: 40 x 20 - 80 x 50 mm
- Wall thickness: 0.8 – 3.0 mm
- Tube length: 4 – 10 m
- Voltage: 380V / 50Hz AC
- Line direction: Left to right
- Material: Carbon steel – hot rolled, pickled, galvanized, cold rolled
- Yield strength: 330 – 520 N/mm²
- Coil weight: 2x6,000 kg
- Coil width: 50 – 250 mm
- Coil inner diameter: 508 – 610 mm
- Coil outer diameter: 1,100 – 2,000 mm

Scope of Supply:

1. OTO MILLS entry section with double decoiler, end-to-end strip joiner, and accumulator
2. Forming, sizing, and Turk’s head units
3. THERMATOOL 300kW high-frequency welder
4. Fume extraction system
5. Cooling tunnel
6. Tube straightener
7. SEUTHE flying saw
8. Roller conveyor
9. Automatic packaging unit
10. ITIPACK strapping machine
11. Electrical system
Codpfx Aoyl Uicedtogp
12. Pneumatic system
13. Hydraulic system

Tube diameter: 32 – 101 mm
Squares: 20 x 20 – 70 x 70 mm
Rectangles: 40 x 20 – 80 x 50 mm
Wall thickness: 0.8 – 3.0 mm
Tube length: 4 – 10 m
Direction: Left to right
Material: Carbon steel – hot-rolled, pickled, galvanized, cold-rolled
Yield strength: 330 – 520 N/mm²
Coil weight: 2 x 6,000 kg
Coil width: 50 – 250 mm
Coil inner diameter: 508 – 610 mm
Coil outer diameter: 1,100 – 2,000 mm

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.