Dişli açma makinesi

Pfauter PE 800

The perfect retrofit machine! Mechanically in outstanding condition!
This machine can be inspected under power until 12.05.2026 and will then be dismantled due to lack of space.

Please download the current KLINGELNBERG inspection protocols attached.

Gleason P 800
Year of manufacture: 1995
Control system: SIEMENS 840 C (discontinued)
Condition: Mechanics in very good condition
Function: Fully operational
Inspection: Machine can be demonstrated under power

Technical Data:
Nominal workpiece diameter: 800 mm
Maximum workpiece diameter: 800 mm
Maximum workpiece diameter, special version: 1,200 mm
Nominal module: 20 / 30 mm
Nominal module, special version: 25 / 35 mm
Drive power: 35 kW
Drive power, special version: 52 kW
Cutter head speed range: 20 - 200 rpm
Cutter head speed range, special version: 26 - 265 rpm
Additional cutter head speed range, special version: 36 - 360 rpm
Cutter head swivel range: +30 / -45 degrees
Cutter head dimensions (standard cutter head), diameter/length: 350 / 375 mm
Centre distance workpiece/tool min./max.: 50 / 600 mm
Centre distance workpiece/tool, special version: 50 / 800 mm
Max. axial slide travel: 700 mm
Max. axial slide travel, special version: 1,000 mm
Max. axial slide travel, special version: 1,300 mm
Lowest cutter head position above table: 450 mm
Table diameter: 800 mm
Table bore diameter: 245 mm
Table bore depth: 875 mm
Max. table speed: 15 rpm
Max. table load: 10,000 kg

Machine dimensions:
Width A: 5,800 mm
Godey Hfm Nspfx Anwjuc
Length B: 6,900 mm
Height C: 4,700 mm
Machine weight: 22,000 kg

Regarding the values from the latest KLINGELNBERG measurement protocols for the gearing BEFORE the grinding process:

"Pitch and lead are within specification. In the profile, one measurement shows a borderline or slightly out-of-tolerance fHα deviation. Please check whether this value is permissible as per drawing / customer approval, or if corrective action or reworking is necessary. The gears were always forwarded to the RZ 1000 REISHAUER for grinding accordingly. Nevertheless, an overhaul of the C-axis is recommended. A quotation from GLEASON PFAUTER LUDWIGSBURG is available for this. Estimated cost: 10,000 EUR."

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.