Abkant pres

Placke HQPB 4 60 to. x 1.550 mm

Machine condition as new.

The High Quality Press Brake, abbreviated HQPB, is the top model among Placke press brakes. Complete manufacturing, from the hydraulic cylinder to the control cabinet, is carried out in-house. Through the use of state-of-the-art technology combined with many years of experience in forming technology, the HQPB series enables precision bending at the highest level. Even the standard configuration is a fully functional press brake. With this package of safety, reliability, and efficiency, together with straightforward operation, we can meet the highest requirements and precision demands in the bending process.

Machine Frame:
- Base machine constructed from S 355 N steel
- Side frames with two pressure pipes and top-mounted oil tank, welded assembly
- Above-floor design
- Painted with 2-component textured paint, light grey (RAL 7035) and signal grey (RAL 7004)

Upper Beam:
Itjdeyvzkiepfx Adped
- Press beam, stress-relieved annealed
- Immersion depth measurement, reading head guided by ball roller guides
- Separate Y1 and Y2 control, electric deflection monitoring

Hydraulic System:
- Hydraulic proportional control valves with electronically monitored cylinder synchronization
- Solid steel cylinders with inductively hardened piston rods
- Low-noise internal gear pump

Punch Clamping:
- Upper tool clamping system WILA, hydraulic clamping system, Type NSCL-II-HC, fully hardened, Max. load: head-bearing = 250 t/m, shoulder-bearing = 300 t/m

Lower Beam/Table:
- Narrow table including manual clamping strip, dimensions: 48 mm high, 70 mm wide
- Reinforced lower table. No mechanical crowning system required for deflection compensation due to design characteristics.
- Single V-die holder (13x20)
- Working height: 1050 mm (with 55 mm tool height)

Front of the Machine:
2 aluminum support arms at the front, approx. 600 mm long, including 2 tilting stops, tape measure, and plastic wear strip. The support arms can slide on a linear ball bearing guide and their height can be adjusted via slotted holes to accommodate dies from 55 mm to 100 mm high. The ball bearing guide is milled into the lower beam.

Control and Regulation Technology:
- Operating voltage 400V / 3Ph / 50Hz
- Switching and safety components by Telemecanique
- Backgauge with AC servo technology
- Pilz safety PLC

Backgauge '2-axis controlled':
- X and R axes CNC-controlled
- Z-axis manually adjusted

Delem DA 66 Touch controller on swing arm.

Safety devices according to CE standards

Technical Data and Work Area:
Press force: 600 kN
Working length: 1550 mm
Clearance between side frames: 1200 mm
Installation height: 400 mm
Throat depth: 255 mm
Ram stroke: 215 mm

Ram speeds:
Rapid traverse max.: 280 mm/s
Working speed max.: 9.8 mm/s
Return speed max.: 170 mm/s
Ram positioning accuracy: ±0.01 mm
Ram tilt: ±10 mm (electronically limited to ±5 mm)
Table height above floor: 947 mm
Motor power: 5.5 kW

Main Dimensions:
Underfloor depth: 0 mm
Foundation depth of side frames: 0 mm
Machine weight: approx. 6.5 t
Tank capacity (hydraulic oil): 120 l

(Technical modifications reserved)

Lighting behind the machine:
Work area illumination by LED strip light between the side frames.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.