Pompa Pomac PUMPS PLP3-4Pomac PUMPS
PLP3-4
Pompa Pomac PUMPS PLP3-4
Pomac PUMPS
PLP3-4
Sabit fiyat KDV hariç
€4.000
Üretim yılı
2015
Durumu
Kullanılmış
Konum
Warszawa 

Resimleri göster
Haritayı göster
Makineye ait bilgiler
- Makine tanımı:
- Pompa Pomac PUMPS PLP3-4
- Makine üreticisi:
- Pomac PUMPS
- Model:
- PLP3-4
- Seri numarası:
- GST07-2M VBR132C12
- Üretim yılı:
- 2015
- Durumu:
- kullanılmış
- Işlevsellik:
- tamamen fonksiyonel
Fiyat ve Konum
Sabit fiyat KDV hariç
€4.000
- Konum:
- Marszałkowska 55/73, 00-676 Warszawa, Polska

Ara
Teklif detayları
- Listeleme kimliği:
- A217-03553
- Referans no.:
- 20131
- Son güncelleme tarihi:
- 13.04.2026
Açıklama
This offer includes an industrial pump PUMPS PLP3-4, manufactured in 2015. The pump is designed for robust industrial applications, with a maximum flow rate of 20.0 m³/h and a maximum operating pressure of 5.0 bar. It is powered by a 5.5 kW electric motor.
Gedpfjy Am Rbox Adrobk
The pump is primarily constructed from stainless steel, ensuring durability and corrosion resistance, making it suitable for a wide range of fluids. It is mounted on a sturdy metal base equipped with adjustable feet, allowing stable installation on various surfaces. The pump housing features inlet and outlet ports, along with Pomac markings on the side, indicating the manufacturer or associated brand.
The pump comes with an electric motor featuring a protective housing and electrical connections for safe operation. The overall condition of the pump and motor shows evidence of prior use, including some water stains and minor surface wear, which are typical for industrial equipment.
Additional technical data from the manufacturer includes the ability to handle viscosities up to 1,000,000 cPs and maximum temperatures up to 140ºC. The pump can accommodate solids up to 60 mm in size, depending on the specific model and screw type. Various connection types are supported, including couplings (DIN11851, DIN11864-1, SMS1145), flanges (EN1092-1, rectangular, DIN11864-2, ANSI), and tri-clamps (ISO2852, DIN32676, DIN11864-3).
Shaft sealing options include single or double mechanical seals made from silicon carbide or tungsten, as well as lip seals and O-rings in various elastomers such as EPDM, Viton, NBR, Teflon, and KALREZ, some of which are FDA-compliant. Wetted parts are typically made from AISI 316L stainless steel, with other materials available upon request. Surface roughness is maintained below 0.8 microns, with options for finer finishes.
Drive standards include IEC motors with IE2 efficiency, IP55 protection, class F insulation, and PTC sensors, with optional upgrades to IE3 efficiency, ATEX certification, CSA/UL approval, and available decentralized variable speed drives.
This pump is suitable for a variety of industrial pumping needs, offering reliable operation with a robust design and multiple customization options to meet specific application requirements.
Flow rate 20 m³/h
Maximum pressure 5 bar
Motor power 5.5 kW
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Gedpfjy Am Rbox Adrobk
The pump is primarily constructed from stainless steel, ensuring durability and corrosion resistance, making it suitable for a wide range of fluids. It is mounted on a sturdy metal base equipped with adjustable feet, allowing stable installation on various surfaces. The pump housing features inlet and outlet ports, along with Pomac markings on the side, indicating the manufacturer or associated brand.
The pump comes with an electric motor featuring a protective housing and electrical connections for safe operation. The overall condition of the pump and motor shows evidence of prior use, including some water stains and minor surface wear, which are typical for industrial equipment.
Additional technical data from the manufacturer includes the ability to handle viscosities up to 1,000,000 cPs and maximum temperatures up to 140ºC. The pump can accommodate solids up to 60 mm in size, depending on the specific model and screw type. Various connection types are supported, including couplings (DIN11851, DIN11864-1, SMS1145), flanges (EN1092-1, rectangular, DIN11864-2, ANSI), and tri-clamps (ISO2852, DIN32676, DIN11864-3).
Shaft sealing options include single or double mechanical seals made from silicon carbide or tungsten, as well as lip seals and O-rings in various elastomers such as EPDM, Viton, NBR, Teflon, and KALREZ, some of which are FDA-compliant. Wetted parts are typically made from AISI 316L stainless steel, with other materials available upon request. Surface roughness is maintained below 0.8 microns, with options for finer finishes.
Drive standards include IEC motors with IE2 efficiency, IP55 protection, class F insulation, and PTC sensors, with optional upgrades to IE3 efficiency, ATEX certification, CSA/UL approval, and available decentralized variable speed drives.
This pump is suitable for a variety of industrial pumping needs, offering reliable operation with a robust design and multiple customization options to meet specific application requirements.
Flow rate 20 m³/h
Maximum pressure 5 bar
Motor power 5.5 kW
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
En son çevrimiçi: bugün
İlk kayıt tarihi: 2026
7 çevrimiçi ilan
İstek gönder
Telefon & Faks
+48 882 6... ilanlar
İlanınız başarıyla silindi
Bir hata oluştu












