5 eksenli CNC işleme merkezi + dahili takım soğutma sistemi (IKZ)

Posmill H500U

Internal Article No.: 25043

5-Axis CNC Machining Center

POSmill H 500 U

Year of Manufacture: 2018

Only approx. 1,000 spindle hours since spindle replacement
Total machine operating hours: approx. 20,500

Spindle replaced in 2024 (18,000 rpm)
Machine geometry recalibrated in 2024

Travel paths: X 650 / Y 850 / Z 500 mm
Rotary table: 360° continuous
Controller: Heidenhain iTNC 530
Spindle: 18,000 rpm
Spindle interface: HSK-A63

Ibedpfx Aaewz I Acjyjd
Machine equipped as follows:

- 60-position tool changer
- Through-spindle coolant system (IKZ; 20 bar) with belt filter unit
- Air through the spindle
- Kessler rotary table, 500 mm diameter
- Infrared 3D part measurement probe
- Tool measurement via BLUM laser
- Rotating inspection window
- POS DCM collision avoidance module
- Mobile electronic handwheel
- Oil mist extraction

- Heidenhain linear measurement system on X, Y, Z
- Air purge for all linear measurement systems
- Active air-to-air control cabinet cooler
- Active cooling for the 4th and 5th axis, controlled
- Network connection + USB port
- Controlled spindle chiller
- Heidenhain rotary measuring system
- Contour protection with POSkontur
- External hinge belt chip conveyor
- Coolant pump at head, controlled by M-code
- Chip flushing device and pump
- Chip flushing equipment
- Machine status light
- Air at the spindle
- Electro-mechanical oil/coolant separator
- Automatic coolant level monitoring
- 3-way media connection at table center
- Hydraulic power unit with M-code control

Connected load: 60 kVA

Machine dimensions:
W 4,800 / D 4,600 / H 3,000 mm
+ IKZ unit (LxWxH) 2,200 x 1,300 x 1,400 mm

Weight: approx. 13,000 kg

The machine is in excellent, well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was re-calibrated (linear guides repaired and adjusted). The machine has only seen limited production since then.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.