8 katlı çapraz bağlamalı balya makinesi

Presona AB LP 80 VHK 1

Technical Data of the Baler:

Manufacturer: Presona AB
Model: LP 80 VHK 1
Year of manufacture: 2012
Total machine operating hours: 25,895 hours as of July 2025
Pump effective operating hours: 14,135 hours as of July 2025
Total number of bales pressed: 235,597 units as of July 2025
Main ram pressing force: 78.5 t
Specific pressing force: 95 N/cm²
Pre-pressing force: 28 t
Press chamber volume: 2.7 m³
Feed hopper dimensions: 1,500 x 1,100 mm
Theoretical throughput: 930 m³/hour
Throughput under operating conditions: 410 m³/hour
Bale dimensions: 750 x 1,100 mm
Drive power: 55 kW
Tying: 5-fold vertical, 3-fold horizontal, fully automatic
Throughput at bulk density of:
- 30 kg/m³: approx. 9 to 12 t/hour, depending on material
- 50 kg/m³: approx. 14 to 17 t/hour, depending on material
- 100 kg/m³: approx. 16 to 25 t/hour, depending on material
Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, depending on material
Bale weight: 450 to 600 kg, depending on material and bale length
Hydraulic oil tank capacity: 1,000 L
Baler dimensions with hopper installed: 10,985 x 3,750 x 4,310 mm (L x W x H)
Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm
Machine weight (press): approx. 24 t

Condition of the baler:
The machine has been partially overhauled and serviced in our workshop and, after completion, tested in operation in both manual and automatic modes.

The following overhaul work was carried out:
- Machine cleaned, partially derusted and partially repainted
- Hydraulic oil tank completely emptied and cleaned
- Oil and air filters replaced, new hydraulic oil filled
- Press ram disassembled and cleaned
- All four running rollers of the press ram disassembled and replaced
- Wire station with deflection rollers for the lower wire cleaned and freed up
- Side guides of the press ram removed, smoothed, reassembled and readjusted
- Main hydraulic cylinder disassembled and inspected
- Piston rod replaced, cylinder tube honed
- Complete set of seals replaced, pressure test performed
- Hydraulic hose for the main hydraulic cylinder replaced
- Vertical and horizontal tying needle systems disassembled, cleaned, deflection rollers for the wire freed up and serviced
- Chain cleaned, lubricated, tension readjusted
- Drillomat cleaned, wire cutter, twister shafts and twister fingers checked, retightened with torque wrench and serviced
- Door contact switches checked and partially replaced
- Emergency stop switches tested
- Complete electrical wiring checked and partially renewed
- Bearings for the wire guiding rollers under the baler replaced
- New safety guards for both vertical and horizontal tying systems fabricated and installed
- Machine checked, general maintenance carried out, and tested in both manual and automatic modes

Scope of delivery:
Only the baler itself is for sale.

Notes:
Lsdpfx Absvwlqqjwjhp
Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. A viewing appointment can be arranged upon request. We do not assume liability for the technical data provided or for any possible errors.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.