Otomatik pres Presona LP80VHK1

Presona LP80VHK1

Durumu: yenilenmiş (kullanılmış), Üretim yılı: 2012, çalışma saatleri: 25.895 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 78 t, dolum açıklığı genişliği: 1.100 mm, dolum ağzı uzunluğu: 1.500 mm, balya genişliği: 1.100 mm, balya yüksekliği: 750 mm, balyanın ağırlığı: 600 kg, toplam ağırlık: 24.000 kg, yağ tankı kapasitesi: 1.000 l, güç: 55 kW (74,78 bg), hacim debisi: 930 m³/saat, Technical Data of the Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours as of July 2025 Gedpfxovwlqqs Aayjui Pump effective operating hours: 14,135 hours as of July 2025 Total number of bales pressed: 235,597 units as of July 2025 Main ram pressing force: 78.5 t Specific pressing force: 95 N/cm² Pre-pressing force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/hour, depending on material - 50 kg/m³: approx. 14 to 17 t/hour, depending on material - 100 kg/m³: approx. 16 to 25 t/hour, depending on material Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, depending on material Bale weight: 450 to 600 kg, depending on material and bale length Hydraulic oil tank capacity: 1,000 L Baler dimensions with hopper installed: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop and, after completion, tested in operation in both manual and automatic modes. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely emptied and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers of the press ram disassembled and replaced - Wire station with deflection rollers for the lower wire cleaned and freed up - Side guides of the press ram removed, smoothed, reassembled and readjusted - Main hydraulic cylinder disassembled and inspected - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for the main hydraulic cylinder replaced - Vertical and horizontal tying needle systems disassembled, cleaned, deflection rollers for the wire freed up and serviced - Chain cleaned, lubricated, tension readjusted - Drillomat cleaned, wire cutter, twister shafts and twister fingers checked, retightened with torque wrench and serviced - Door contact switches checked and partially replaced - Emergency stop switches tested - Complete electrical wiring checked and partially renewed - Bearings for the wire guiding rollers under the baler replaced - New safety guards for both vertical and horizontal tying systems fabricated and installed - Machine checked, general maintenance carried out, and tested in both manual and automatic modes Scope of delivery: Only the baler itself is for sale. Notes: Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. A viewing appointment can be arranged upon request. We do not assume liability for the technical data provided or for any possible errors.