Cam çıtası testere

RUCHSER RU-GL-45°

Number of motors: 2 units
Working length: 2380 mm
Control: ,
RUCHSER RU-GL-45°
-----
Glazing Bead Saw on Slide Work Table

Designed for pairwise cutting of glazing beads on a sliding work table.

The RU-GL glazing bead saw is mounted on a sliding work table with scanning and clamping system for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw mounted on a manually movable carriage. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt covering, length including side storage shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable counter supports for positioning the sashes.

Item 1: RU-GL Double Glazing Bead Saw 45° on RU-SA-3000
-----
Gedpfx Asxmkz Njnwsuc

For glazing beads up to 30 x 70 mm (W x H)!!!,
Mounted on sliding work table with scanning and clamping system for two glazing beads. Cutting length min. 230 mm, max. 2380 mm.
Left saw fixed, right saw on carriage manually movable.
Pneumatic clamping device from above and from the side, safety two-hand operation.
Saw motors 0.37 kW, voltage 400V.
Sliding work table with felt covering, length incl. side storage shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm.
Pneumatically lowerable counter supports for positioning the sashes.
-----
Base price in above configuration: on request!
-----
Plus packaging and shipping as well as current material cost surcharge of 6% of list price

Options with additional prices:
-----

Item 1.1 1 set carbide saw blades for
RU-GL glazing bead saw
D = 200 mm, 64 teeth, consisting of 1 pc each of saw blade L1233 (left) and L1085 (right), with special grind 43°.
Additional cost: 502.00 Euro

Item 1.2 Mounting device for scanning gauge on
RU-GL for transferring scanning measurements to the saw
with pneumatic installation.
Additional cost: 635.00 Euro

Item 1.3 Scanning gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm
Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for scanning glazing bead length
Additional cost: 497.00 Euro

Item 1.4 Scanning gauge for glazing beads, total length 1500 mm, max. scanning length approx. 1430 mm
Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for scanning glazing bead length
Additional cost: 445.00 Euro

Item 1.5 Spacer set for rabbeted glazing beads
for RU-GLS-P45° and RU-GLS-ED45°
Price on request, after inspection of the glazing beads.
Depending on the number of glazing beads used, several spacer sets may be required. To determine the exact quantity, we need profile drawings of the glazing beads to be used before order confirmation.
Additional cost: on request, after receiving your glazing bead drawings

Item 1.6 Operating time switching device for
independent extraction unit.
Adjustable from 5 sec. to 3 hrs. For every sawing process, extraction runs automatically for the preset time. If another cut is made during the extraction time, the timer resets and extraction starts again from the beginning.
Additional cost: 731.00 Euro
-----
Total price ...

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.