Precision turning lathe

Schaublin 102

Completely overhauled on a new workbench, with new paint and belt guard, and a new headstock.

Inventory No. 2240050, machine including:

Bljdpfx Ale Ahxhis Ijp
1 NEW workbench 2000x800 mm with blue Urphen top 2000x800x50 mm
     1 leg, 1 B750 cabinet with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200

1 bench for overhead control

1 W-20 tailstock with geared reducer, complete with tightening key, overhauled
1 overhauled cross slide

1 overhauled aligned steady rest
1 380V/50Hz/3ph motor, 2 speeds 720/1420 rpm - 0.9/0.6 HP
1 tensioner pulley with pulley and belt

1 W-20 dead center
1 set of 37 W20 collets
1 1x3 jaw chuck Ø 100 mm on W-20 flange and additional jaw sets

1 TRIPAN tool holder set including:
-1 type 111S turret with stud
- 2 tool holders 131
- 1 tool holder 131b
- 1 double tool holder 132

1 self-centering drilling chuck, capacity 1-13 mm on CM2 taper
1 CM2 dead center

TECHNICAL CHARACTERISTICS:

Capacities:
- center height 102 mm
- distance between centers, W-type headstock, standard 470 mm
- distance between centers, W headstock with reducer 375 mm
- diameter allowed above the bed 200 mm
- diameter allowed above the cross slide 120 mm
Bench:
- height x width x length 160x100x1000 mm
cast iron bench with rectified dovetail profile
Headstocks:
- spindle nose for collets W-20
- bar passage through collet 14.5 mm
- headstocks with reducer, ratio 1:5
Cross slides:
- travel of longitudinal tool slide 90 mm
- travel of transverse tool slide 100 mm
- tool dimensions 12 x 12 mm
Tailstocks:
- internal taper of tailstock spindle Morse 2
- spindle travel, controlled by screw and handwheel 80 mm

The technical specifications are provided without guarantee, subject to errors and omissions.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.