TAKIM YAPICI TORNASchaublin
102N TO W-25
TAKIM YAPICI TORNA
Schaublin
102N TO W-25
Üretim yılı
2026
Durumu
Kullanılmış
Konum
Bienne 

Resimleri göster
Haritayı göster
Makineye ait bilgiler
- Makine tanımı:
- TAKIM YAPICI TORNA
- Makine üreticisi:
- Schaublin
- Model:
- 102N TO W-25
- Seri numarası:
- 310435
- Üretim yılı:
- 2026
- Durumu:
- yenilenmiş (kullanılmış)
- Işlevsellik:
- tamamen fonksiyonel
Fiyat ve Konum
- Konum:
- Route de Soleure 145, 2504 Bienne, Suisse

Ara
Teklif detayları
- Listeleme kimliği:
- A363-4114
- Referans no.:
- 2250023
- Son güncelleme tarihi:
- 03.03.2026
Açıklama
Completely overhauled – new paintwork,
New workbench
Country of manufacture: Switzerland
Voltage: 380V, 50Hz, 3-phase
Customs tariff code: 8458.1930
TECHNICAL DATA
- Centre height: 102 mm
- Centre distance, headstock type W, standard: 470 mm
- Centre distance, headstock type W with reduction gearbox: 375 mm
- Swing over bed: 200 mm
- Swing over cross slide: 120 mm
Bed:
- Height-width-length: 168-100-1000 mm
Bed made of cast iron with ground trapezoidal profile
Headstocks:
- Spindle nose for collets: W-25
- Collet bore: 19.0 mm
- Gear reduction ratio: 1:5
Cross slide:
- Longitudinal travel: 90 mm
- Cross travel: 100 mm
- Shank section for turning tools: 12x12 mm
Tailstocks:
- Quill taper: Morse 2
- Quill travel (tailstock with leadscrew and handwheel): 80 mm
Subject to error or omission,
The technical data is provided without obligation.
Inventory number 2250023, machine consists of:
1 NEW workbench 2000 x 800 mm with blue Urphen worktop 2000 x 800 x 50 mm
1 base, 1 B750 cabinet with 7 drawers (1xD50/2xD75/2xD100/1xD150/1xD200)
1 support for controls above the planing plate
1 W-25 workpiece holder without gearbox, with clamping wrench, overhauled
1 renovated cross slide
1 refurbished and aligned tailstock
1 motor 380V/50 Hz/3 phase, 2 speeds
1 used solid centre W-25
1 set of used W25 collets
Kedpfxsdr R Tcj Aagodk
1 Reishauer ZMG 2x3 jaw chuck, Ø 110 mm on W-25 flange, used
1 set of used Multifix tool holders, consisting of:
- 1 turret type A with AG20 pin
- 2 tool holders AD1675
- 2 tool holders AD2090
1 Albrecht keyless drill chuck, capacity 1–13 mm, with CM2 shank, used
1 used solid centre CM2
OPTIONAL
1 used clamping device with new belt CHF 1,000.-- + VAT
1 GRINDING MACHINE TYPE B-8 with 360° swivelling spindle
max. speed 28,000 rpm, height adjustable, adjustment device, Ref. 800053 CHF 1,325.-- + VAT.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
New workbench
Country of manufacture: Switzerland
Voltage: 380V, 50Hz, 3-phase
Customs tariff code: 8458.1930
TECHNICAL DATA
- Centre height: 102 mm
- Centre distance, headstock type W, standard: 470 mm
- Centre distance, headstock type W with reduction gearbox: 375 mm
- Swing over bed: 200 mm
- Swing over cross slide: 120 mm
Bed:
- Height-width-length: 168-100-1000 mm
Bed made of cast iron with ground trapezoidal profile
Headstocks:
- Spindle nose for collets: W-25
- Collet bore: 19.0 mm
- Gear reduction ratio: 1:5
Cross slide:
- Longitudinal travel: 90 mm
- Cross travel: 100 mm
- Shank section for turning tools: 12x12 mm
Tailstocks:
- Quill taper: Morse 2
- Quill travel (tailstock with leadscrew and handwheel): 80 mm
Subject to error or omission,
The technical data is provided without obligation.
Inventory number 2250023, machine consists of:
1 NEW workbench 2000 x 800 mm with blue Urphen worktop 2000 x 800 x 50 mm
1 base, 1 B750 cabinet with 7 drawers (1xD50/2xD75/2xD100/1xD150/1xD200)
1 support for controls above the planing plate
1 W-25 workpiece holder without gearbox, with clamping wrench, overhauled
1 renovated cross slide
1 refurbished and aligned tailstock
1 motor 380V/50 Hz/3 phase, 2 speeds
1 used solid centre W-25
1 set of used W25 collets
Kedpfxsdr R Tcj Aagodk
1 Reishauer ZMG 2x3 jaw chuck, Ø 110 mm on W-25 flange, used
1 set of used Multifix tool holders, consisting of:
- 1 turret type A with AG20 pin
- 2 tool holders AD1675
- 2 tool holders AD2090
1 Albrecht keyless drill chuck, capacity 1–13 mm, with CM2 shank, used
1 used solid centre CM2
OPTIONAL
1 used clamping device with new belt CHF 1,000.-- + VAT
1 GRINDING MACHINE TYPE B-8 with 360° swivelling spindle
max. speed 28,000 rpm, height adjustable, adjustment device, Ref. 800053 CHF 1,325.-- + VAT.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
İstek gönder
Telefon & Faks
+41 32 34... ilanlar
Bu ilanlar da ilginizi çekebilir.
Küçük ilan
Kuchl
2.021 km
Ağaç torna makinesi / torna tezgahı
MIDI2 Plus SET
MIDI2 Plus SET
Küçük ilan
Velen
2.612 km
Toggle Press - Tek Sütun
BERG & SCHMIDPNK 3400
BERG & SCHMIDPNK 3400
Küçük ilan
Bocholt
2.630 km
Kaynak makinesi seti
BoehlerUranos NX 2200 MTE
BoehlerUranos NX 2200 MTE
Küçük ilan
Kuchl
2.021 km
Ağaç torna makinesi / torna tezgahı
Twister FU 200
Twister FU 200
Küçük ilan
Hollanda
2.465 km
KERN HSPC EVO
KERNHSPC EVO
KERNHSPC EVO
Küçük ilan
Almanya
2.249 km
Çelik taşlama makinesi
WMWnicht bekannt
WMWnicht bekannt
Küçük ilan
Kuchl
2.021 km
Ahşap torna tezgahı / torna tezgahı
DrechselmeisterTwister ECO+
DrechselmeisterTwister ECO+
Küçük ilan
Wijchen
2.685 km
Tezgah torna (merkez torna)
EmcoEMCOMAT-17 D
EmcoEMCOMAT-17 D
Küçük ilan
Pesaro
1.940 km
Talaş kırıcı oluk Taşlama makinesi
PERUZZISR600
PERUZZISR600
İlanınız başarıyla silindi
Bir hata oluştu






























































































