Alçak şasi römork

SCHWARZMÜLLER Tieflader mit gekröpftem Plateau

Durumu: yeni, azami yük ağırlığı: 30.860 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.550 mm, Donanım: ABS, Our complete vehicle inventory, including vehicles available immediately and at short notice, can be found on our website. Excerpts from the equipment list. Full equipment details available on request. Frame: * Steel welded construction with front frame drop, front corners chamfered and rear taper, drive-on ramp with centrally positioned excavator bucket recess = rear depression between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t rated lashing brackets, 7 pairs of recessed, pull-out approx. 10 t lashing rings (2x on the raised platform, 1x in the front frame drop, 3x in the lowbed between the wheel recesses and 1x in the drive-on ramp) 2 pairs of wheel recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located at the front after the frame drop including one-piece drive-over aluminium cover, for max. surface load of approx. 11,650 daN/unit * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), located between the 3rd and 4th axles, including one-piece drive-over aluminium cover, suitable for the transport of wheel loaders with a wheelbase of approx. 2,700 - 3,600 mm, with wheel diameter around 1,485 – 1,740 mm, maximum wheel loader overhang at rear 2,220 mm * Width between the wheel recesses approx. 1,255 mm (= outer edge to outer edge of longitudinal beams) Frame attachments: * 5 pairs of receptacle sockets in the outer frame for square tube stanchions approx. 100 x 50 x 5 mm (3x in the lowbed, 2x on the raised platform) * Both sides of the lowbed platform extendable widening with softwood planks approx. 50 mm (track width of construction machinery to be transported must not exceed outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, arranged: 1 pair at the front of the raised platform inside the longitudinal beams, 1 pair at the very rear in the excavator bucket recess left and right, 1 pair at the front of the raised platform before the frame drop inside the longitudinal beams, 1 pair at the rear of the lowbed before the drive-on ramp in the excavator bucket recess left and right Drawbar: * Fixed drawbar with approx. 50 mm heavy-duty towing eye, cranked version, silent bushing mount, drawbar retention spring with tensioner * Truck coupling height from approx. 775 mm to approx. 975 mm * Drawbar length approx. 1,800 mm Support system: * 2 hydraulic rear supports – individually operated, control system housed in a separate stainless steel box Axles: * SAF air suspension low-bed axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, make: Conti HTR2 (tyre load capacity approx. 12 t/axle) Iijdsy Auhnspfx Aagja Brake system/suspension: * Brake system according to ECE directive R13 dual-line pneumatic brake system * Wabco EBS system 4S3M, 1st and 3rd axle sensor-controlled * RSS/RSP – stability program * Spring-loaded parking brake on 3rd and 4th axles * Aluminium air tanks for total weight 44 t * Brake/air hose couplings with 2 individual coupling heads yellow/red * EBS/ABS connection cable * Retaining rubber for EBS and electric connectors * Air suspension with lifting and lowering function, front and rear individually operable * Automatic adjustment to programmed ride height from 15 km/h Assistance/safety systems: * SWIT – Schwarzmüller Intelligent Telematics Floor: * Softwood flooring approx. 50 mm, impregnated,