Damperli yarı römork

STAS V-9.70 light 53m³ Wasserdicht

Chassis, Lightweight Design
Aluminium (15-6-12)
Two fully automatic welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm

Axles and Suspension, 430 mm Disc Brakes
SAF (CD) axle assemblies 3x9t with stabilisation, air bellows centrally arranged on the chassis longitudinal beam, first axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, raise-lower valve, BVA brake wear indicator, automatic tipping lowering

Tyres and Wheels
6 wheels with tyres size 385/65 R 22.5 by choice of manufacturer, Alcoa DuraBright 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims, wheel nut caps

Landing Legs
Mechanical landing gears with two speeds and 2x20t static load capacity, with swivel foot for air suspension, braking system to EU standards, two-line Wabco system, spring-actuated parking brake acting on two axles and Wabco EBS-E 2S/2M incl. RSS (Roll Stability Support) with premium modulator, Wabco Smartboard Infocenter, aluminium air tank system

Electrical System
In accordance with StVZO regulations featuring 4 three-chamber lamps (2×2) type Aspöck, 24V system with 2x7 and 1x15-pin socket, side marker lights, 2 switchable LED Pro Rock work lights, 2 LED work lights on each side and at the rear. All air and electrical conduits are neatly routed in plastic pipes!

Tipper Body/Bin "Watertight" – Internal welds throughout
Aluminium tipping body, sidewalls made of 30 mm thick plank profiles (2–3 mm), 600 mm wide welded, bottom 8 mm thick highly wear-resistant alloy (5383H34/HB 110) with 45° angled profile to the sidewall, straight front wall 4 mm reinforced, rear wall as straight pendulum tailgate with LL rubber seal, spindle locks, additionally 2x side and 4x lower, 4 pneumatic cylinders (2x open, 2x close), rubber bumpers at the tipping body fixed to the frame at the front wall

Hydraulic System, Tipping Cylinder with "Sleeve" Mounting
Hydraulic cylinder mounted on the front wall, working pressure 150 bar, make: Edbro, with approx. 2.5m hydraulic hose and 1" loose half, tipping angle approx. 48°

Accessories
Bodpfx Adjxfyb Aj Nelp
6 Parlok mudguards, complete spray flaps over the entire vehicle width attached to the underrun protection, ALU spare wheel holder, foldable side underrun protection on the right, large toolbox type 860, approx. 3m aluminium ladder, centrally raised approx. 150 mm, additional centrally mounted hoop receiver for positioning up to 2 hoops to increase loading width, roll-up tarpaulin with central light strip and separate reinforcements in high-wear areas (approx. 900 g/m² quality) equipped with a quick-tension mechanism, continuous rubber cord at the rear end of the tarpaulin to be fixed on the pivoting hoop using two tension hooks, walkway on frame in chassis color, rear tarpaulin closure with welded rubber cord for water ingress protection, robust foldable underrun protection in aluminium, 2" "Clear-Pass" spray flaps on mudguards as per EU standard, side frame-mounted holders for shovel, broom, and scraper installed above the axles, etc.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.