KUVERTANLEGER

STENZ FEEDER

WITH DELIVERY CONVEYOR
Lajdpfx Asxuhy Sohwok

Deflection Belts:
For envelope sizes 10.5 cm x 14.8 cm and in portrait orientation, the deflection belts should be pushed towards the middle transport belt.
Rule: for large envelopes, push the deflection belts outward; for small envelopes, push the deflection belts (22) inward.

CONNECTION TO THE PRINTING PRESS
The STENZ FEEDER does not require synchronization. The feeder is guided into the printing press using the hand grips, and the required height is adjusted with the crank.
Important: Only after setting the print height should the rear rollers be fixed and the stability checked. Switch on the machine and begin printing.
For single-sheet feeder printing presses (GTO), the tilt is adjustable.
Trouble-free envelope printing can begin.

Developed for heavy-duty use at maximum printing speed.
Compatible with all 36 x 52 printing presses, regardless of the feeder system (overlapping/single sheet feed).
- No mechanical modifications to the printing press required.
- No synchronization settings required due to laser technology.
- Very short setup time enables economical use starting from 1,000 envelopes.
- Simple operation.
- The feeder’s design enforces overlapping feed. The throughput of the Stenz Feeder is therefore not limited.
- Minimal wear parts for extremely long service life.
- Already approved in thousands of different printing presses.
- A Swiss quality product.
- Designed by printers for printers.

Specifications:
Speed: Limited by printing press
Length: 115 cm
Width: 50 cm
Height: adjustable
Max. sheet size: 36.5 x 35 cm
Max. feed width: 36.5 cm
Electrical: 230 V, 50 Hz

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.