PNÖMATİK KESME MAKİNESİ

Stromab TR 500

Koşul: yeni, Üretim yılı: 2026, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical specifications of the cutting unit: Pneumatic up-stroke saw TR500 Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore 30 mm, 144 teeth, thickness 4.6 mm Cut cycle speed: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful infeed motor for bundle weights up to 80 kg Maximum feed push system speed: 90 m/min Pneumatic lifter at end of cut cycle and overhead pusher return Ppodehw Ng Iopfx Anxer Data input management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Load and save machine parameters via USB port Cycle pattern (template) editing and direct input via controller Transfer of cutting lists created on PC via USB or Ethernet port Working software: Manual input of board length Partial optimization without length reading of the workpiece Cut cycle with 3 optimization options (maximum length, sequence, board order) Up to 1000 cutting lists with 11 sizes each or a single list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Piece length reading via photocell Cut cycle with 6 optimization criteria: (maximum length, sequence, board sequence, volume, minimal waste, and priority length) "OPTI PLUS" package: full optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical description: "OPTI PLUS" package: for removal of knots and defects Photocell for reading knots and defects in wood scanning Marking with fluorescent crayons/pencils (Note: only available in combination with ZA250) Pneumatic side clamping device PC software for creating lists in XML format

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2004, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 241306, testere bıçağı çapı: 500 mm, kesme yüksekliği (maks.): 170 mm, kesme genişliği (maks.): 395 mm, güç: 7,5 kW (10,20 bg), sondaj deliği çapı: 30 mm, TECHNICAL DETAILS Max. cutting width: 395 mm Max. cutting height: 170 mm Min. saw blade diameter: 490 mm Max. saw blade diameter: 500 mm Saw blade bore diameter: 30 mm Infeed table length: 5,640 mm Outfeed table length: 1,180 mm Feed speed: Automatic MACHINE DETAILS Voltage: 400 V Power consumption: 16.5 A Fuse: 32 A Power: 7.5 kW Ppjdpfey Akvnox Anxer Transport weight: 800 kg Number of transport packages: 3 EQUIPMENT Automatic feed system

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2020, çalışma saatleri: 1.234 h, Fonksiyonellik: tamamen fonksiyonel, besleme uzunluğu X ekseni: 7.000 mm, y ekseni ilerleme uzunluğu: 600 mm, Z ekseni ilerleme mesafesi: 250 mm, X ekseni ilerleme hızı: 80 m/dak, toplam uzunluk: 8.000 mm, toplam yükseklik: 1.800 mm, toplam ağırlık: 2.000 kg, testere bıçağı çapı: 500 mm, disk çapı: 500 mm, masa uzunluğu: 7.000 mm, Donanım: USB portu, For sale: STROMAB MATRIX TR 500 optimizing crosscut saw in excellent technical condition, used in a small production facility primarily for cutting structural timber. Utilized for the prefabrication of timber frame houses. Podjwp Rvhjpfx Anxspr The machine is fully operational and has been regularly serviced. Ready for immediate operation with no additional investment required. Sold with VAT invoice. OPTION TO TEST ON-SITE PRICE negotiable.

Koşul: ikinci el, Üretim yılı: 2016, toplam yükseklik: 1.600 mm, toplam uzunluk: 14.100 mm, toplam genişlik: 1.600 mm, Ağırlık: 2.500 kg - Üretim yılı: 2016 - Dokümantasyon mevcut: Evet - CE işareti mevcut: Evet - CE sertifikası mevcut: Hayır - Seri numarası: 6237 - Gerilim [V]: 415 - Akım tüketimi [A]: 20 Psdewnh N Nepfx Anxepr - Taşıma ölçüleri: 14.100mm x 1.600mm x 1.600mm (uz x gen x yük) - Taşıma ağırlığı [kg]: 2.500kg - Taşıma paketleri [adet]: 4 Finansal Bilgiler KDV: Belirtilen fiyat KDV hariçtir KDV/Farklı Vergilendirme: KDV, işletmeler için indirilebilir Endüstri alanındaki tüm ürünler için teslimat ve takas her zaman mümkündür Yorick Diebels

Koşul: ikinci el, Üretim yılı: 2022, toplam yükseklik: 1.700 mm, toplam uzunluk: 10.000 mm, toplam genişlik: 1.800 mm, Ağırlık: 1.100 kg Fiyat: Talep üzerine - Üretim yılı: 2022 Ppedpfxsyna Enj Anxer - Dokümantasyon mevcut: Hayır - CE işareti mevcut: Evet - CE sertifikası mevcut: Hayır - Seri numarası: 8737 - Maks. testere bıçağı uzunluğu [mm]: 6000 - Maks. testere genişliği [mm]: 300 - Min. testere bıçağı çapı [mm]: 490 - Maks. testere bıçağı çapı [mm]: 500 - Mil testere bıçağı çapı [mm]: 30 - Besleme masası uzunluğu [mm]: 7000 - Çıkış masası uzunluğu [mm]: 2000 - Opsiyonlar: Otomatik besleme sistemi - Gerilim [V]: 400 - Akım tüketimi [A]: 20 - Sigorta [A]: 32 - Nakliye ölçüleri: 10000mm x 1800mm x 1700mm (u x g x y) - Nakliye ağırlığı [kg]: 1100kg - Nakliye paketleri [Adet]: 3 Finansal Bilgiler KDV: Belirtilen fiyata KDV dahil değildir KDV/muafiyet: KDV, ticari alıcılar için indirilebilir Sanayi sektörüne ait her türlü ekipman için teslimat ve takas her zaman mümkündür Yorick Diebels

Koşul: ikinci el, Üretim yılı: 2005, toplam yükseklik: 1.750 mm, toplam uzunluk: 1.350 mm, toplam genişlik: 1.350 mm, Optimizasyonlu kapalı testere Stromab TR 500 Matrix 4 4000 Üretim yılı: 2005 Motor gücü: 10 hp Otomatik İtme Sistemi Mürekkep püskürtmeli yazıcı - Üretim Yılı: 2005 - Dokümantasyon mevcut: Hayır - CE sertifikası mevcut: Hayır - Seri numarası: 250143 - Ana motor gücü [kW]: 7.5 - Maks. kesme genişliği [mm]: 375 - Mil testere bıçağı çapı [mm]: 30 - Besleme tablası uzunluğu [mm]: 4300 - Çıkış tablası uzunluğu [mm]: 2000 - Taşıma ölçüleri: 1350 mm x 1350 mm x 1750 mm (u x g x y) - Taşıma paketleri [adet]: 3 Ppsdpfxowq U Dxo Anxjr Mali Bilgiler KDV: Belirtilen fiyata KDV dahil değildir KDV/Farklı KDV uygulaması: KDV, işletmeler için indirime tabidir Endüstri alanındaki tüm ürünler için her zaman teslimat ve takas mümkündür Yorick Diebels

Koşul: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully automatic optimizing cross-cut saw TR-500 MATRIX-6000 (with full optimization) - Motor power: 7.5 kW - Saw blade diameter: 500 x 30 mm Z=144 - Cutting capacity as per cutting diagram - Cutting capacity: 135 x 280 mm - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 seconds - Pneumatic cross-cutting unit - 8° inclined work table - Minimum workpiece thickness: 10 mm - Safety guard over cross-cutting unit - CE-compliant - Weight: 1000 kg Electrical connections: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction port: 4 x 100 mm diameter - Extraction capacity: 2400 m3/h - Air consumption per cycle: 4 Nl - Air velocity at center of extraction port: approx. 25–35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servomotor - Feed system with precision rack and pinion, position feedback via servomotor - Pneumatic pusher lift at end of cycle, top return - Photocell for workpiece length measurement - Photocell for defect detection – Marking with fluorescent chalk - 8° working surface inclination - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Cut list creation directly in the machine's control - Up to 1000 cut lists with 10 sizes each - Single list with up to 10,000 sizes in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimum waste, priority) - Standard USB and Ethernet ports - Includes OPTI function for automatic measurement of workpieces to be cut. Optimal solution for processing material of variable lengths, with single or bundled feeding - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimum waste, priority) Ppedov A Htdopfx Anxor - Includes OPTI PLUS function for defect marking detection, ensuring full optimization and removal of knots and defects - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Cut list creation on PC: €360.00 - Outfeed table: €360.00/m

Koşul: ikinci el, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw featuring a pneumatic saw blade feed and a blade diameter of 500 mm. This machine is ideal for precise and efficient cross-cutting of workpieces in workshop environments. Year of manufacture: 2009 Machine number: 3229 — Technical data • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller table length: 1,000 mm • Outfeed roller table length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & Delivery The machine is in excellent technical condition and ready for immediate operation. • Inspection possible at any time • Securely packed shipping on pallet via freight forwarder available at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus 19% VAT, subject to changes and errors. Pjdpfx Asxiza Uonxjpr