Çapraz kesim testeresini optimize etme

STROMAB TR-500 MATRIX-6000

Dimensions (L/W/H): 0 x 0 x 0 mm
Weight: 1000 kg
Total power requirement: 8.5 kW
Fully automatic optimizing cross-cut saw TR-500 MATRIX-6000 (with full optimization)

- Motor power: 7.5 kW
- Saw blade diameter: 500 x 30 mm Z=144
- Cutting capacity as per cutting diagram
- Cutting capacity: 135 x 280 mm
- Cutting capacity: 125 x 295 mm
- Cutting capacity: 95 x 325 mm
- Cutting capacity: 80 x 340 mm
- Cutting capacity: 55 x 360 mm
- Cutting cycle: 4 seconds
- Pneumatic cross-cutting unit
- 8° inclined work table
- Minimum workpiece thickness: 10 mm
- Safety guard over cross-cutting unit
- CE-compliant
- Weight: 1000 kg

Electrical connections:
- Supply voltage: 400 V / 50 Hz
- Control voltage: 24 V
- Extraction port: 4 x 100 mm diameter
- Extraction capacity: 2400 m3/h
- Air consumption per cycle: 4 Nl
- Air velocity at center of extraction port: approx. 25–35 m/s

Electronically controlled pusher:
- Infeed length: 6000 mm
- Pusher speed: 90 m/min
- Driven by brushless servomotor
- Feed system with precision rack and pinion, position feedback via servomotor
- Pneumatic pusher lift at end of cycle, top return
- Photocell for workpiece length measurement
- Photocell for defect detection
– Marking with fluorescent chalk
- 8° working surface inclination
- Positioning tolerance: +/- 0.4 mm

Control system:
- High-resolution 12" touchscreen monitor (800 x 600 pixels)
- Cut list creation directly in the machine's control
Knedpfx Asv A Htdjhwef
- Up to 1000 cut lists with 10 sizes each
- Single list with up to 10,000 sizes in sequence
- 3 optimization options (maximum length, sequence, workpiece sequence)
- 3 optimization options (volume, minimum waste, priority)
- Standard USB and Ethernet ports
- Includes OPTI function for automatic measurement of workpieces to be cut. Optimal solution for processing material of variable lengths, with single or bundled feeding
- 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimum waste, priority)
- Includes OPTI PLUS function for defect marking detection, ensuring full optimization and removal of knots and defects
- Marking with chalk

Options:
- Pneumatic side clamp: €850.00
- Cut list creation on PC: €360.00
- Outfeed table: €360.00/m

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.