Çapraz kesim testeresini optimize etme

STROMAB TR-450 MATRIX-6000

Dimensions (LxWxH): 0 x 0 x 0 mm
Weight: 900 kg
Total power requirement: 5 kW
Fully automatic optimizing cross-cut saw with full optimization, TR-450 MATRIX-6000

- Motor drive power: 4.0 kW
- Saw blade diameter: 450 x 30 mm, Z=72
- Cutting capacity according to cutting diagram
- Cutting capacity: 95 x 265 mm
- Cutting capacity: 85 x 277 mm
- Cutting capacity: 60 x 290 mm
- Cutting capacity: 40 x 310 mm
- Cutting capacity: 25 x 330 mm
- Cutting cycle: 4 seconds
- Pneumatic cutting unit
- Inclined worktable, 8°
Hjdpfx Aev A Hr Tsaxsfr
- Minimum workpiece thickness: 10 mm
- Safety cover over cutting unit
- CE compliant
- Weight: 900 kg

Electrical connection values:
- Supply voltage: 400 V / 50 Hz
- Control voltage: 24 V
- Extraction connection: 2 x 100 mm diameter
- Extraction capacity: 2,400 m³/h
- Air consumption per cycle: 6 Nl
- Extraction air speed at center of connection: approx. 25-35 m/s

Electronically controlled pusher:
- Feed length: 6,000 mm
- Pusher speed: 90 m/min
- Drive via brushless servomotor
- Feed system with precision rack and pinion and measurement via servomotor
- Pneumatic lift at end of cycle and top return
- Photoelectric sensor for workpiece length measurement
- Photoelectric sensor for defect detection
- Marking with fluorescent chalk
- Worktable incline: 8°
- Positioning tolerance: +/- 0.4 mm

Control system:
- High-resolution 12" touchscreen monitor (800 x 600 pixels)
- Creation of cutlists directly on the machine controller
- Up to 1,000 cutlists with 10 sizes each
- A single list with 10,000 sequential sizes
- 3 optimization options (maximum length, sequence, and workpiece sequence)
- 3 optimization options (volume, minimal waste, and priority)
- Standard USB and Ethernet ports
- Includes OPTI function for automatic measurement of workpieces to be cut. Ideal solution for processing material of variable lengths, with single or bundle feeding. 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority)
- Includes OPTI PLUS function for mark detection, enabling full optimization and removal of knots and defects.
- Marking with chalk

Options:
- Pneumatic side clamp: €850.00
- Cutlist creation software for PC: €360.00
- Outfeed table: €360.00/m

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.