Akımlı UV daldırma emprenye tesisi

Thumm SU100 P

Thumm SU100 P Electric UV Dip Impregnation System with Exhaust Air Purification System

The electric UV impregnation process is an innovative dip procedure for low voltage round wire windings.
In this process, a low DC voltage is applied to the winding and the required process heat is generated very efficiently by the current flow.
When the preheated winding is immersed, the impregnating resin becomes thin and can thus penetrate into the smallest cavities.
With continued heating, the impregnating resin gels on the hot conductors of the winding, while the resin can flow off again at the cooler laminated core after dipping.

Dedpshuffcofx Abpswc
The winding is heated and dried by means of current. UV lamps cure the photosensitive resin on the laminated core.

By eliminating conventional oven drying, both energy and time are saved. Together with the use of a low-emission impregnating resin, this results in a very positive environmental impact.

Thumm Electric UV Dip Impregnation System
Type: SU100 P
Stators: max. 250 mm Ø
Connected load: 15 kVA
Fuse: 32A
Connection: 3 phase 400 Volt 50 Hz
Power supplies: 2 x 50V / 280 A

Thumm Aerosol Separator
400 V
1.85 KVA

Complete plant closure!
Wide selection of mezzanine floors, pallet racking, shelving systems, and vertical carousels.
High-quality industrial machinery, lathes, grinding machines, hand tools.

You will find more items – new and used – in our shop!
International shipping costs upon request!

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.