Otomatik torna tezgahı

Traub TNL12/7

TECHNICAL DATA

Headstock
max. bar diameter (mm): 13.0
Quality of round material (DIN 671) (mm): Ø Xh9
Collet (optional): Through-bore
Guide bush (optional): Through-bore
max. turning length / headstock stroke:
with fixed guide bush (mm): 140
with rotating guide bush (mm): 80
with programmable guide bush (mm): 80
Spindle speed: 12,000 rpm
C-axis electronic resolution (degrees): 0.001
Rapid traverse Z1 (m/min): 30

Tool Carrier 1
Slide travel X1 (mm): 35
Slide travel Y1 (mm): 38 (-10 +28)
Rapid traverse X1/Y1 (m/min): 15
Tool stations (number): 6 (12)
Turning tool cross section (mm): 8x8 or 12x12
Clamping range Z for driven drilling tools (mm): 0.5 - 7
Chip-to-chip time (s): 0.3

Tool Carrier 2
Slide travel X2 (mm): 35
Slide travel Z2 (mm): 50
Rapid traverse X2/Z2 (m/min): 15
Tool stations (number): 6
Turning tool cross section (mm): 8x8 or 12x12
Clamping range Z for driven drilling tools (mm): 0.5 - 7
Chip-to-chip time (s): 0.3

Tool drive for Tool Carrier 1 and 2
Spindle speed (rpm): 0...8000
Max. number of driven tools: 2x6
Clamping diameter for drilling tools (mm): 0.5 - 7

Sub-Spindle / Front Attachment
max. bar diameter (mm): 13.0
Max. longitudinal stroke Z3, Z4 / X3 (mm): 140 / 228
Rapid traverse Z3,Z4/X3 (m/min): 30
Tool stations (number): 4
Spindle speed: 12,000 rpm
C-axis electronic resolution (degrees): 0.001

Rear Tool Post (dragged / fixed)
Stroke Z dragged with working spindle (mm): 80
Mounting diameter tool holder (mm): 20
Tool stations (number): 3

Rear Tool Post (X4 axis)
Stroke X4 (mm): 42
Rapid traverse speed (m/min): 15
Mounting diameter tool holder (mm): 28
Djdpfxeyr N Dzs Adajki
Tool stations (number): 4

Tool drive for rear tool post (with X4 axis)
Spindle speed: 0...10,000 rpm
Max. number of driven tools: 4
Clamping diameter for drilling tools:
driven (mm): 0.5 - 7
non-driven (mm): 0.5 - 10

Coolant System
Pump pressure (single stage) (bar): 3
Tank volume (l): 180
Delivery rate (l/min): 40

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.