Briketleme makinesi

UMP Technika BP 500

Durumu: kullanılmış, Üretim yılı: 2019, çalışma saatleri: 4.000 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: BP 500 A, DESCRIPTION BRIQUETTING PRESS This press is designed for compressing secondary raw materials into briquettes (briquette shape: rectangular). Technical specifications of the press: Dimensions: - Length: 1800 mm (2100 mm for transport) - Width: 1800 mm (2000 mm for transport) - Height: 1900 mm (2200 mm for transport) - Net weight: 2945 kg Power supply: - 380 V, 50 Hz, 33 kW, 70-100 A Output capacity: - 450 kg/h (+/-50 kg depending on raw material type and particle size) Noise level: - A-weighted sound pressure level at the workplace: 77.8 dB +/- 5 dB Compression pressure: - Minimum: 1000 kg/cm² - Maximum: 1700 kg/cm² Pressure: - Max. 300 bar Raw material moisture content: - Not exceeding 14% Briquette dimensions: - Width: 150 mm - Thickness: 60 mm - Length: 40-105 mm Permissible ambient temperature for operation: Tsdpfx Aboxmav Ns Ajf - -20°C to +35°C (up to +50°C with an additional cooling system) The press consists of: Electrical system – controls the hydraulic system of the press. There are four electric motors: the first (30 kW) is used for driving the main hydraulic pumps; the second (1.1 kW) for driving the cooling hydraulic pump; the third (0.55 kW) for operating the fan of the oil cooling system; the fourth (1.5 kW) for driving the sawdust feed screw. The operation of the motors and hydraulic valves is controlled via contactors and intermediate semiconductor relays by a microprocessor with expansion modules. A liquid crystal display with buttons is installed for visualization and parameter adjustment. Hydraulic system – with the help of pumps, high- and low-pressure and solenoid hydraulic valves, and hoses, operates the hydraulic cylinders. There are three hydraulic cylinders: the first (main) for sawdust compaction; the second (vertical) for initial compaction of sawdust; the third (shaping) for transferring the briquette shape. The system also includes an oil cooling circuit with a pump and air cooler. Oil filtration is ensured by the main high-performance filter, a cooler system filter, and a fine filtration unit. Raw material feed is provided by a built-in feed hopper. Material in the hopper is periodically mixed to prevent bridging. The mixer is driven by a chain from the screw's motor gearbox. The screw cyclically feeds the raw material into the vertical cylinder column shaft. The hopper is equipped with two material level sensors (upper and lower). If the hopper is enlarged, the sensors can be repositioned as required. Control – there are two modes: manual and automatic. All control equipment is housed in an electrical cabinet. Automatic control is the standard operational mode, without operator intervention. Manual control is intended for press adjustment, fault detection, or returning cylinders to their initial positions in case of malfunction. Operation is facilitated by a display located on the electrical cabinet door, allowing viewing and adjustment of set parameters, as well as monitoring press status and errors.

Durumu: yeni, Üretim yılı: 2025, Boyutlar: uzunluk 1800 mm, genişlik 1800 mm, yükseklik 1900 mm. Ağırlık net 3000 kg. Presin elektrik gücü: 380 V 50 Hz 33 kW 70-100 A Pres kapasitesi: 450-500 kg / h Basınç: minimum 1000 kg / cm², maksimum 1700 kg / cm2 Briket boyutları: uzunluk 150 mm genişlik 60 mm yükseklik 40-105 mm Tedpfxjc Nb Rfs Ab Aef