Tezgah torna (merkez torna)

WEILER Werkzeugmaschinen GmbH Commodor

Good day,

We hereby offer you, without obligation, a used lead and feed screw lathe from the manufacturer Weiler.

Manufacturer: WEILER Werkzeugmaschinen GmbH
Type: Commodor
Year of manufacture: 1990
Machine No.: 2881

Spindle:
Spindle diameter at front bearing: 90 mm
Spindle bore: 56 mm
Internal taper: Morse 6
Faceplate diameter: 300 mm
Chuck diameter max.: 250 mm

Tool carriage:
Bed saddle guide length: 380 mm
Scale drum on the apron handwheel: 1 revolution = 25 mm
Graduation: 0.1 mm
Cross slide travel: 215 mm
Scale ring graduation: 0.05 mm
Top slide travel: 115 mm
Scale ring graduation: 0.05 mm
Height of tool support surface to turning center: 38 mm
Max. tool cross-section: 25 x 25 mm

Tailstock:
Quill travel: 150 mm
Quill diameter: 60 mm
Internal taper: Morse 4
Graduation on quill: 1 mm
Scale drum on the handwheel with graduation: 0.05 mm
Transverse offset: +/- 10 mm

Spindle speeds:
Single-speed motor: 50 – 2000 rpm
Pole-changeable motor: 25 – 2000 rpm
Drive motor power: 4 kW
Operating voltage: 380 V, 50 Hz
Rated current: 9.5 A
Main fuse: 25 A

Feeds:
Number: 60
Longitudinal: 0.026 – 0.888 mm/rev
Cross: 0.013 – 0.444 mm/rev

Thread pitches:
Metric: 0.36 – 12 mm
Inch: 2 – 45 tpi
Module: 0.2 – 4 mod.
Diametral pitch: 5 – 90 D.P.
Leadscrew pitch normal
Metric: 6 mm
Inch: 4 tpi

Space requirements and weight:
Overall dimensions: 2350 x 1000 x 1400 mm (L x W x H)
Center height over floor: 1100 mm
Transport weight net approx. 1500 kg

The following accessories are included with the machine:
Rcodpfx Ahox Rcnlowsk
Three-jaw chuck
Drill chuck with Morse taper fitting
Coolant system
Work lamp
Chip guard/rear wall

Note:
The above technical data has been taken from the operating manual, manufacturer brochures or other sources. We cannot guarantee the correctness or completeness of this information.

Scope of delivery:
1 piece used lead/feed screw lathe Weiler Commodor

Application area and condition:
The conventional lead and feed screw lathe was sporadically used in a maintenance workshop for repair work and for reproduction of spare parts for the company's own machinery fleet. It is suitable as a compact conventional lathe for maintenance workshops, as a training machine in vocational schools, and as a backup machine. The lathe is fully functional, in good condition and can be inspected under power at our facilities.

We would be pleased if this machine is of interest to you.

Your service team Mertens & Frowein GmbH

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.