Lathe

Weiler Matador VS2

Durum: işlem için hazır (kullanılmış), Torna boyu 500 mm yatak üstü torna çapı 297 mm destek üstü torna çapı 160 mm iş mili deliği 36,0 mm alıcı DIN 55022 Gr. 5 Kovan: 3 MK Kovan hareketi 90,0 mm devir hızı 30 - 3550 devir/dak Motor devirleri: 1410 / 2830 devir/dak Toplam güç ihtiyacı 3,3 kW Gerilim 380 V Makine ağırlığı yaklaşık 620 kg Ölçüler U-G-Y 1420 x 700 x 1200 mm Bir meslek okulundan – çok iyi durumda (!!) Özellikle orta hassas tornalama parçaları için uygun Donanım: - sağlam dişli/çekme mili torna tezgahı - RÖHM üç çene aynası Ø 160 mm - Katlanabilir ayna koruyucu - Ayna anahtarı - MULTIFIX takım tutucu A, 3 adet yeni uçlu - Kayar punta - Döner makina lambası - Kontrol paneli, sol ön Dsdpfxexq Hhyo Aazskw - Tezgâh ve üst destek için otomatik ilerlemeler - Makine altlığı, kapaklı dolap (depolama alanı) - Talaş sıçrama korumalı arka duvar - Acil durdurma butonu - Kullanım kılavuzu

Durum: işlem için hazır (kullanılmış), WEILER Matador VS 2, yeni üç eksenli dijital gösterge dahil, okul atölyesinden -Tepe yüksekliği 140 mm -Tepe mesafesi 500 mm -Mil devir sayısı 15 - 3550 dev/dak -Otomatik uzunlamasına ve enine ilerleme -Diş açma / Metrik / İnç vb. -Yeni üç eksenli dijital gösterge -Elektrikli ayna koruyucu -Çalışma lambası -Çeşitli uçlarla birlikte Multifix temel tutucu -Soğutma sıvısı sistemi -Üç çeneli aynalar / Kama çubuklu aynalar -Sabit mengene MK 3 Dkjdpfx Aaozr Rnyozsw -Çeşitli aletler -Dokümantasyon Ölçüler: U x G x Y 1,5 x 0,6 x 1,5 metre / Ağırlık 680 kg Hatalar ve yazım yanlışları mahfuzdur.

Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-axis Digital Readout Heidenhain ND 780 from Training Workshop!! Technical Data: - Machine No. 7702, year of manufacture approx. 1990 - Centre height: 140 mm - Centre distance: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose DIN 55022-5 with bayonet lock - Tailstock MT 3 - Feeds from 0.012 to 0.9 mm/rev - Thread cutting options: Metric, Inch, Module, and Diametral Pitch - Metric thread pitches from 0.25 to 12 mm - Brake motor - Weight approx. 700 kg - Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: - 3-axis digital readout Heidenhain ND 780 - Quick-clamping device, internal and external collets (see images) - 1 pc. 3-jaw chuck with 3 sets of jaws - Multifix size A quick change tool post with 3 tool holders Dsdpfey T Hqcex Aazskw - Spindle guard - 1 pc. bed stop - Change gears - Machine feet About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is of course fully functional. All slides move smoothly and evenly. The Weiler runs quietly even at high speeds. The original location was a training workshop. The machine is equipped with extensive accessories. Take the opportunity to view this machine under power on site and convince yourself of its excellent condition.

Durum: mükemmel (kullanılmış), Üretim yılı: 1988, Fonksiyonellik: tamamen fonksiyonel, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from Elesta, Ex-Training Workshop Unit !! Technical Data: >> Machine No.: 88-8115, Year of Manufacture: 1988 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Camlock Spindle Nose, DIN 55022-5, with bayonet lock >> Tailstock: MK 3 >> Feeds: 0.012 to 0.9 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch Djdpfxsy Tmkvj Aazjkw >> Metric Thread Pitches: 0.25 to 12 mm >> Brake Motor >> Weight: approx. 700 kg >> Dimensions (LxHxD): 1.4 m x 1.2 m x 0.55 m Accessories and Equipment: >> 3-axis Elesta digital readout >> Quick-clamping device for internal and external collets (see picture) >> 1 pc. 3-jaw chuck with 1 set of jaws >> Multifix size A with 3 tool holders >> Spindle guard >> 1 pc. bed stop >> Change gears >> Travelling steady >> Machine feet About the machine: For sale is a Weiler Matador VS-2 lathe in very good condition. Of course, the machine is fully functional. All slides move smoothly and evenly. The Weiler also runs quietly even at high speeds. The machine’s previous location was a training workshop. It is equipped with a comprehensive set of accessories. Take advantage of the opportunity to view and test the machine under power on site and verify its excellent condition for yourself.

Durum: mükemmel (kullanılmış), Üretim yılı: 1992, Fonksiyonellik: tamamen fonksiyonel, Weiler Matador VS-2 Lead and Feed Screw Lathe with NEW K&C 3-Axis Digital Readout, Special Edition in Light Grey!!! Dksdpfxsyyb T Se Aazow Technical Data: >> Machine No. 92-028, Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Speed range: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.012 to 0.9 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, with 12-month manufacturer warranty and operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> 1 three-jaw chuck with one set of jaws >> 1 four-jaw chuck with one set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly repainted in light grey. A very attractive machine. The 3-axis digital readout from K&C has been retrofitted. All linear scales are new and are equipped with protective covers to guard against dirt. The carriage and slides all move smoothly and evenly. Take the opportunity to view this machine under power on site and see the condition for yourself.

Durum: mükemmel (kullanılmış), Üretim yılı: 1992, Fonksiyonellik: tamamen fonksiyonel, Weiler Matador VS-2 Leadscrew and Feedshaft Lathe with 3-Axis Digital Readout by K&C, NEW, in Special Light Grey Finish! Dodeyylqhjpfx Aazskw Technical Data: >> Machine No. 92-029, Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread types possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 12 mm >> Weight approx. 700 kg >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Features: >> 3-axis digital readout by K&C, new, with 12-month manufacturer's warranty and user manual. Functions: mm/inch conversion, coordinate selection ABS/INC, value halving, reference mark, tooling memory for 200 tools, taper calculator, radius/diameter display, quick zeroing, counting direction reversal. >> 1 piece 3-jaw chuck with one set of jaws >> 1 piece 4-jaw chuck with two sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the Machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly repainted in light grey. A very fine machine. The 3-axis digital readout from K&C has been retrofitted. All scales are new and equipped with protective covers to guard against dirt. The slides all run smoothly and evenly. Take the opportunity to view this machine on site under power and see its condition for yourself.

Durum: mükemmel (kullanılmış), Üretim yılı: 1992, Fonksiyonellik: tamamen fonksiyonel, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C, NEW, in Special Light Grey Paint Finish!!! Technical Data: >> Machine No. 92-027, Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Speed range: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Supports metric, imperial, module, and diametral pitch threads >> Metric thread pitches from 0.25 to 12 mm >> Approx. weight: 700 kg >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, incl. manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool database for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching, etc. >> 1 three-jaw chuck with 1 set of jaws >> 1 four-jaw chuck with 1 set of jaws Djdpfoyylq Uex Aazjkw >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the Machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been professionally repainted in light grey. A very nice machine. The 3-axis digital readout by K&C has been retrofitted. All scales are brand new and equipped with cover strips to protect against contamination. All slides move smoothly and uniformly. Take the opportunity to inspect this machine under power on site and see its condition for yourself.