Damperli yarı römork

WIELTON Bulk Master 3-Achs-Kippsattelauflieger 47 cbm

Durumu: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.205 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 2.100 mm, yükleme alanı hacmi: 47 m³, Donanım: ABS, Overall width: 10,402 mm Floor length: 8,585 mm Overall width: 2,550 mm Total height to upper frame: 3,550 - 3,600 mm Total height to tarpaulin peak: 3,710 - 3,760 mm Track width: 2,040 mm Distance king pin to 2nd axle: 6,120 mm Fifth wheel height: 1,200 mm Axle spacing: 1,310 mm Rear overhang: 1,367 mm Floor height: 1,400 - 1,450 mm Max. height with tipper body raised: 9,720 - 9,770 mm Technical gross weight: 42,000 kg Axle load: 8,000 kg Technical axle load: 9,000 kg Fifth wheel load: 12,000 kg Technical fifth wheel load: 15,000 kg Loading volume: 47.6 cbm Unladen weight: 6,233 kg Weight specified with an accuracy of +/- 3% Axle spacing: 1,310 mm Distance king pin to 2nd axle: 6,120 mm Underrun protection made of steel Foldable rear underrun protection Chassis frame with lowered gooseneck design, longitudinal beams with recessed fifth wheel plate area Welded construction, weight-optimized, made from high-strength S700 steel Side impact protection made from aluminium profiles, compliant with ECE 73 2 plastic wheel chocks Axles and Suspension 1,200 mm coupling height (unladen) Rigid axles 3rd lift axle 1st lift axle SAF disc axles 3x 9,000 kg 22.5 INTRADISC CD Two-speed landing gear, full load (BPW Gen2 FL/SAF Hercules) Full PVC mudguards, 6 pcs. Rubber mud flaps with Wielton logo behind the third axle 6x steel rims 22.5-11.75 ET=120 Protective caps for wheel nuts Tyres 6x tyres 385/65/22.5 standard (Bridgestone/Hankook) Other chassis equipment Toolbox 44 L (mounted front left on chassis) Water tank 30 L (mounted centre left on the chassis) Holder for dust bag on chassis 1 pc. Dust bags 2 pcs. Shovel and broom mounted on chassis above the mudguard Extendable ladder at the rear Internal height: 2,100 mm Double-wing aluminium combination doors, aluminium (1/2 ?) vertical with portal beam Sidewalls: internal thickness 2.5 mm, fully welded Front wall inclined at 20 degrees Pallet-width design 7 mm floor 2 grain discharge slides Tension locks at the bottom: 2 pcs. Floor crossbeam spacing below: 360 mm Body damping: polyp Other superstructure equipment Tension chain between the sidewalls Control panel on the chassis frame, entrance in the front left (driver’s side) PVC rolling tarp 680 g/m2 with quick-release fastener and aluminium rolling tube, (for vertical rear closure with extension triangle at front and rear, centre pipe welded into the tarp) Braking system / Pneumatics Steel air reservoir Spring pressure gauge Automatic lowering when tipping WABCO brake system 2S/2M Chassis painting Chassis painted RAL 7021 (black grey) Body painting Body painted RAL 7001 (silver grey) Tarpaulin color RAL 9006 (white aluminum) Bjdpfxewz Auyo Acwodk Hydraulics HYVA hydraulic cylinder, eye mounting top Hydraulic connection kit 1? Electrics Partial LED lighting LED reversing lights, 2 pcs. 2x 7-pin, 1x 15-pin with EBS connection, without connection cables to the tractor unit Partial LED lighting Aspöck EUROPOINT III 2 LED work lights on landing legs Additional systems Tipping angle indicator Control line for lift axle from driver's cab The system has been developed for semi-trailers and trailers and is intended for monitoring vehicle tyre pressure and temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tyre pressure and temperature) mounted on the rims and a device connected to the EBS. Reflective warning signs Partial contour marking with Wielton logo Partial contour marking on sides, white Partial contour marking on rear, red Wielton warning sticker

Durumu: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.205 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 2.100 mm, yükleme alanı hacmi: 47 m³, Donanım: ABS, Overall width: 10402 mm Floor length: 8585 mm Overall width: 2550 mm Overall height to upper frame: 3550 - 3600 mm Overall height to top of tarpaulin: 3710 - 3760 mm Track width: 2040 mm Kingpin to 2nd axle distance: 6120 mm Fifth wheel height: 1200 mm Axle spacing: 1310 mm Rear overhang: 1367 mm Floor height: 1400 - 1450 mm Max. height with body tipped: 9720 - 9770 mm Gross technical weight: 42000 kg Axle load: 8000 kg Technical axle load: 9000 kg Fifth wheel load: 12000 kg Technical fifth wheel load: 15000 kg Loading volume: 47.6 cbm Unladen weight: 6233 kg The weight is specified with an accuracy of +/-3%. Axle spacing: 1310 mm Distance: kingpin to 2nd axle: 6120 mm Steel underrun protection Foldable rear underrun protection Chassis frame with lowered gooseneck frame, longitudinal beams with recessed fifth wheel plate area Welded design, weight-optimized from high-strength S700 steel Side underrun protection made of aluminum profiles, ECE 73 compliant 2 plastic wheel chocks Axles and suspension 1200 mm coupling height (unladen) Rigid axles 3rd lift axle 1st lift axle SAF disc brake axles 3x 9000 kg 22.5" INTRADISC CD 2-speed landing legs, full load (BPW Gen2 FL/SAF Hercules) Full PVC mudguards, 6 pcs Rubber mudflaps with Wielton logo behind the third axle 6x steel rims 22.5-11.75 ET=120 Nut protection caps Tyres 6x tyres 385/65/22.5 standard (Bridgestone/Hankook) Other chassis equipment 44 l toolbox (mounted at the front of the chassis, left side) 30 l water tank (mounted in the middle of the chassis, left side) Holder for dust bag on chassis, 1 pc. Dust bag, 2 pcs. Shovel and broom mounted above the mudguard on the chassis Extendable ladder at rear Internal height: 2100 mm Double-wing combination door, aluminium (½ ?), vertical with portal crossbeam Side walls SL inside thickness 2.5 mm, fully welded Front wall inclined at 20 degrees Pallet width specification 7 mm floor 2 grain chutes Tension locks at bottom, 2 pcs Crossbeam spacing under floor: 360 mm Poly body cushioning Other body equipment Tension chain between side walls Operating platform on chassis frame, entry front left (driver’s side) PVC rolling tarpaulin, 680 g/m² with quick-release fastener and aluminium winding tube, (with vertical rear end including extension triangle at front and rear, centre tube welded into tarpaulin) Brake system/pneumatics Steel air tanks Spring-pressure gauge Automatic lowering when tipping Wabco brake system 2S/2M Chassis paint Chassis painted RAL 7021 (black grey) Body paint Body painted RAL 7001 (silver grey) Bedpfx Acep Ncb Nswedk Tarpaulin colour RAL 9006 (white aluminium) Hydraulics HYVA hydraulic cylinder, eye mounting top Hydraulic connection kit 1? Electrics Partial LED lighting LED reversing lights, 2 pcs 2x 7-pin + 1x 15-pin with EBS connection, without connection cables to tractor unit Lighting: partial-LED Aspöck-EUROPOINT III 2 LED working lights at landing legs Additional systems Tipping angle indicator Control line for lift axle from cab The system is developed for semi-trailers and trailers and serves to monitor the vehicle’s tyre pressure and temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tyre pressure and temperature) mounted on the rims and a device connected to the EBS. Reflective warning boards Partial contour markings with Wielton logo Partial side contour markings, white