Limekon GmbH

Durumu: mükemmel (kullanılmış), Üretim yılı: 2019, ACS Angelantoni Type: ACS WZH10-4080-2 BT Angelantoni Walk-In Climate Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The unit is designed for demanding industrial, development, and research testing, and features enhanced safety equipment specifically for battery and accumulator testing (e.g. lithium-ion). Special Feature: Safety Equipment for Battery Testing: The chamber is especially equipped for battery and accumulator tests, including: - Pressure relief flap for controlled venting in emergency situations - Gas detection system for early identification of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → ideal for lithium-ion battery tests Suitable for: - Batteries & accumulators (incl. lithium-ion) - Electronics & control units - Automotive components - Industrial & research testing - Endurance, aging, and stress tests Technical Data (from nameplates & documentation) Rodpfx Aceyyvwxo Ejr General: Model: WZH10-4080-2 BT Year: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climate chamber, two-door Test Range: - Temperature: –40 °C to +80 °C - Humidity: 10% to 95% RH Electrical Data: - Supply: 400 V 3-phase + N + PE 50 Hz - Rated power: approx. 37 kW - Full load current: approx. 115 A - Protection class: IP54 - Short-circuit resistance: 10 kA Refrigeration System: - Refrigerant: R452A - Filling quantity: approx. 50 kg - CO₂-equivalent: approx. 107 t Dimensions: - Dimensions (external, approx.): Length: ~4.5 m Width: ~2.2 m Height: ~2.4 m - Weight: approx. 3,800 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Durumu: mükemmel (kullanılmış), Üretim yılı: 2019, ACS Angelantoni Type: ACS WZH10-4080-2 BT Angelantoni Walk-In Climate Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The unit is designed for demanding industrial, development, and research testing, and features enhanced safety equipment specifically for battery and accumulator testing (e.g. lithium-ion). Special Feature: Safety Equipment for Battery Testing: The chamber is especially equipped for battery and accumulator tests, including: - Pressure relief flap for controlled venting in emergency situations - Gas detection system for early identification of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → ideal for lithium-ion battery tests Suitable for: - Batteries & accumulators (incl. lithium-ion) - Electronics & control units - Automotive components - Industrial & research testing - Endurance, aging, and stress tests Technical Data (from nameplates & documentation) General: Model: WZH10-4080-2 BT Rsdpfsyyvrvjx Ac Eer Year: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climate chamber, two-door Test Range: - Temperature: –40 °C to +80 °C - Humidity: 10% to 95% RH Electrical Data: - Supply: 400 V 3-phase + N + PE 50 Hz - Rated power: approx. 37 kW - Full load current: approx. 115 A - Protection class: IP54 - Short-circuit resistance: 10 kA Refrigeration System: - Refrigerant: R452A - Filling quantity: approx. 50 kg - CO₂-equivalent: approx. 107 t Dimensions: - Dimensions (external, approx.): Length: ~4.5 m Width: ~2.2 m Height: ~2.4 m - Weight: approx. 3,800 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Üretim yılı: 1995, Durumu: kullanılmış, Temperature chamber / benchtop test chamber for temperature testing Manufacturer: Heraeus Vötsch Model: HT4002 Year of manufacture: 1995 Redpfsyyvphjx Ac Eer Test volume: 16 liters Temperature range: -40°C to +130°C Mains voltage: 230V Refrigerant: VK R452a Interface: RS232 Weight: 75 kg External dimensions (W x D x H): 465 x 505 x 625 mm Internal dimensions (W x D x H): 310 x 230 x 205 mm 2426

Üretim yılı: 2019, Durumu: iyi (kullanılmış), Weiss Model: WK 10/40-80 Test chamber volume approx. 10 m³ 10 m³ = 10,000 liters Modular climate test chamber Weiss WK 10/40-80 Configuration: water-cooled refrigeration unit Refrigerant type: R449A Special equipment for battery tests: The climate test chamber is equipped with extended safety features for battery and accumulator testing (e.g., lithium-ion): • Pressure relief flap for controlled pressure release in the event of a malfunction • Gas warning system for early detection of critical gas concentrations • Fire suppression system with SalgroMAG aerosol extinguishing generators This equipment significantly increases safety during battery testing and supports use in development and testing environments (taking into account the customer’s safety concept / BMS). Description: For sale is a professional climate test chamber from Weiss Technik, model WK 10/40-80, year of manufacture 2019. The system is used for temperature and climatic testing and is ideally suited for industry, research, development, and quality assurance. The unit allows temperature and humidity testing over a wide range and is designed for continuous operation in industrial and development laboratory settings. Particularly suitable for: Functional and endurance testing Material and component testing Pre-aging and climate simulation Sample conditioning Testing of batteries and accumulators (e.g., lithium-ion) under defined climate conditions (with suitable customer safety concept / BMS) Operation is via a modern S!MPAC® control system with web panel; programs can be stored and run automatically. The unit was in operation up to its removal and is fully functional. General: Manufacturer: Weiss Umwelttechnik GmbH Model: WK 10/40-80 Year of manufacture: 2019 Condition: used, functional CE marking: present Made in Germany Control: S!MPAC® control Web panel / touch operation Program and time control possible Temperature & Climate: Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10 % to 95 % r.h. Humidity accuracy: ± 5 % Dimensions: External (W×D×H): approx. 3300 × 5000 × 2500 mm Internal (W×D×H): approx. 3000 × 2200 × 1500 mm Test chamber volume approx. 10 m³ Media & Systems: Spray system: water pressure 3 bar Compressed air connection: min. 5 bar Rjdpjyyu Rqjfx Ac Eor Refrigerant: R449A Electrical Data: Power supply: 3/N/PE, 400 V AC ±10 %, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Scope of delivery: Weiss Technik WK 10/40-80 climate test chamber Control system / web panel Operating manual (German) Nameplate & documentation Condition: used Scope of delivery: (see photo) (Technical specifications subject to change and errors excepted!) For further questions, please contact us by phone.

Üretim yılı: 2011, Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, Universal Testing Machine Inspekt Table Blue 5kN Mechanical Construction: 2 backlash-free ball screws, driven by a DC servo motor, Fmax = 10 kN, stiffness 10 kN/mm 1 test area up to nominal load: Test area width: 420 mm Max. test stroke without testing tools, adapters, and KMZ: 1025 mm Travel Speeds: Testing speed 0.0015 – 1000 mm/min at full load Return speed 1000 mm/min Force Measurement: Measurement range: within 0.8 – 100% of nominal load, Class 1 (optionally Class 0.5) (+/- 1 % of the displayed value, as per DIN EN ISO 7500-1) Force measurement resolution: +/-180,000 digits with 20ms integration time The machine is supplied with a factory test certificate. If factory or DKD calibration at the installation site is required by the customer, this must be quoted separately. Crosshead Travel Measurement: Incremental square-wave input with encoder monitoring, storage of crosshead position Crosshead travel resolution: 1 µm Dimensions (WxDxH) / Weights: Load frame: 685 mm x 550 mm x 1420 mm / 100 kg - Controller mounted on the load frame Standard Functions: Force, displacement, and strain control Overload protection, automatic force calibration, Specimen fracture detector, return function, Rodpfx Acoyyu I No Eor Setup operation via control panel with display (force, displacement) Data Processing: USB 2.0 interface or LAN, Data transfer rate to PC: 50 Hz (standard), optionally higher data acquisition frequency via special software module Internal data processing rate: 2 ms Optional: up to 2 free slots for expansion cards (1-channel analog or 2-channel digital cards) for additional sensors available 115/230 VAC, 0.5 kVA, 50/60 Hz, 5–40°C, 20–80% humidity Required options for operation: load cell, grips, PC (current standard, OS 8-10-11, testing software) Load Cell 5000 N Measurement range: 5–5000 N tension and compression, with nominal 2 mV/V Output signal, overload protection: +/- 100%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with 1.5 m connection cable, incl. calibration certificate. Incl. Extensometer MFX 200 The MFX 200-B extensometer, due to its robust design and high measuring accuracy, is suitable for nearly all specimens starting from an initial gauge length of 10 mm. All strains can be recorded, from the elastic modulus up to specimen fracture. It can be used without restriction in both the lower and upper test areas. In combination with the MFQ-A, r-value and n-value measurement in sheet metals is also possible. Two different measuring systems are available, which differ in the measuring signal and further technical data (see technical documentation).

Durumu: işlem için hazır (kullanılmış), Emco Test M4C 025 Universal Sertlik Test Cihazı / Sertlik Ölçer / Sertlik Test Makinesi Test Yük Aralığı: 9,8-2450N Test Yüksekliği: 260mm Ekolu: 200mm Maks. İş Parçası Ağırlığı: 50 Kg Rsdpfoyybt Eox Ac Eer Boyutlar: 250mm x 1055mm x 750mm (G x Y x D) Cihazı yerinde incelemek için bizi ziyaret edebilirsiniz. Sizin için uygun fiyatlı bir nakliye organizasyonu da sağlayabiliriz! Satın alımınız için resmi bir fatura alacaksınız. Yabancı müşteriler için geçerli bir KDV kimlik numarası olması şartıyla net fatura da düzenlenebilir. Ara satış hakkı saklıdır. Mağazamızı ziyaret edin ve diğer tekliflerimize de göz atın. Belirtilen firma isimleri ve ticari markalar, sahiplerinin mülkiyetindedir ve yalnızca ürünlerin tanımlanması ve açıklanması amacıyla kullanılmıştır. Teknik verilerde sapmalar ve ürün açıklamalarında hatalar olabilir, tüm haklarımız saklıdır.

Durumu: mükemmel (kullanılmış), Üretim yılı: 2007, Fonksiyonellik: tamamen fonksiyonel, X ekseni hareket mesafesi: 50 mm, Y ekseni hareket mesafesi: 50 mm, For sale is a Zwick/Roell hardness testing machine in good used condition, as shown in the photos. Technical specifications: • Manufacturer: Zwick / Roell • Model: ZHV-10 / PC version • Type: B3212003 • Year of manufacture: 2007 • Vickers hardness tester up to 10 kg • Load range: HV 0.2 to HV 10 • Microscope with CCD camera • With cross table: approx. 135 x 135 mm (travel range: approx. 50 x 50 mm) • Diamond indenter: 136° • Objectives: 10 / 20 / 40 / 60 : 1 • The PC version operates with the testXpert hardness edition software. This software is distinguished by its user-friendly operation and flexible adaptation to changing test conditions. The indentation is measured on-screen by manually or automatically placing the measuring lines and is automatically evaluated. • Scope of delivery as pictured • Condition: Used, in working order Shipping costs via freight forwarding: approx. €120 International buyers are welcome! You will receive an invoice with VAT shown separately. Viewing / collection possible by appointment in 42855 Remscheid. Sale from location 42855 Remscheid, loaded free of charge. Rsdpfoyx Izgjx Ac Ejr Specifications are subject to change and prior sale.

Durumu: yeni gibi (sergi parçası), Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 700 kg, toplam uzunluk: 900 mm, toplam genişlik: 2.100 mm, toplam yükseklik: 2.200 mm, giriş voltajı: 400 V, giriş frekansı: 50 Hz, basınçlı hava bağlantısı: 5 bar, elektrik sigortası: 20 A, Der Ringtester ist für die automatische Rissprüfung an ringförmigen Bauteilen, wie Lagerringen und Zahnrädern, mit dem eddyvisor C konzipiert. Zusätzlich können Anwender Schleifbrand an Innen- und Außenringen von Wälzlagern prüfen. Hierzu übernimmt ein Roboter das Handling und führt den Sensor entlang der Konturen des Prüfteils. Die Maschine ermöglicht Prüfungen mit bis zu zwei Sonden. Alle relevanten Scanparameter sowie die Kommunikation zur Steuerung des eddyvisor C sind im Scanprogramm des Roboters enthalten. Im Zentrum der Anlage steht der eddyvisor C Wirbelstrom-Prüfgeräte (2-Kanal) zur zuverlässigen Riss- und Schleifbrandprüfung. Die Prozessautomatisierung erfolgt über einen integrierten Stäubli TX2-60 Roboter. Die gesamte Anlage wird über einen Schaltschrank mit integriertem Steuer- und Bedienpanel gesteuert und bedient. Eine vertikale Spindel mit Spannfutter gewährleistet eine sichere Fixierung jedes Prüfteils während der Inspektion. Aussortierte, nicht-konforme Teile (NOK) werden automatisch auf zwei separate NOK-Ablagebahnen abgelegt. Für Referenz- und Masterteile steht eine eigene Ablage zur Verfügung, um Kalibrierung und laufende Qualitätssicherung während der Prüfung zu unterstützen. Das System ist mit dem Optical Reflection Sensor von ibg (iORS) für eine präzise, berührungslose Inspektion der Ringe ausgestattet. Redpfxjyx E D Ee Ac Eor Weitere Informationen finden Sie auf unserer Website.

Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Donanım: aydınlatma, EVO Cam II - dahil aydınlatma, ölçüm standı, harici uzaktan kumanda ve 360° açılı objektif Rsdpoyx Dmlsfx Ac Ejr Çok iyi durumda - mikroskop yalnızca ölçüm odasında tutuldu ve yalnızca yetkili personel tarafından kullanıldı. 360° açılı objektif dahil!!! - Açılı objektif, nesnenin hareket ettirilmesine gerek kalmadan her açıdan incelenmesini sağlar. Monitör ve PC'ye bağlantı imkanı - PC'ye bağlandığında, örneğin, görüntüler doğrudan sunucuya kaydedilebilir veya barkod yoluyla DMS'ye eklenebilir. Kutu/Sevkiyat Vision Engineering kutusunda.

Durumu: mükemmel (kullanılmış), Weiss Type: TempEvent T/1000/70/5 Water-cooled temperature test chamber 1000 liters Description: For sale is a high-quality climate test chamber from the brand Vötsch Industrietechnik (Weiss Technik), model TempEvent T/1000/70/5. This unit is used to simulate temperature conditions and is ideally suited for: - Material testing - Electronics testing - Environmental and aging tests - Quality and endurance testing The chamber can generate both very low temperatures (down to approx. -70°C) and high temperatures (up to +180°C), with selectable temperature rates (temperature ramps). Precise control enables reproducible test conditions to be achieved. Convenient operation via integrated touch panel. Special features: - Rapid temperature changes (up to 5 K/min) - Even temperature distribution in the test chamber - Water-cooled system - Industrial standard – robust construction - Maintenance display and operating hours counter available Technical data: Model: TempEvent T/1000/70/5 Temperature range: approx. -70°C to +180°C Temperature change rate: up to 5 K/min High precision & stability: - Temporal temperature deviation: ±0.1 to ±0.5 K → outstanding long-term temperature stability - Spatial deviation: ±0.5 to ±1.0 K - Temperature gradient: ≤ 2.0 K Therefore, this chamber is ideally suited for demanding test processes requiring high repeatability. Test chamber dimensions: approx. 950 × 1100 × 950 mm (W × H × D) External dimensions: approx. 2000 × 1415 × 2030 mm (W × H × D) Side port: 50 cm / 125 cm Electrical data: 400 V / 3~ / 50 Hz Rated current: approx. 34 A Power: approx. 21 kW Rjdpfeyxm Ulox Ac Eor Refrigerants: R449A (approx. 2.9 kg) R23 (approx. 1.3 kg) Weight: approx. 1200 kg For your assurance as a buyer, please note the following: The following procedures are carried out on the chambers we offer before sale: 1. Function check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone.

Durumu: mükemmel (kullanılmış), CTS Type: CS-70/1000-5 Water-cooled Condenser For sale is a high-quality climatic and temperature test chamber by CTS (Clima Temperatur Systeme), model CS-70/1000-5. This unit is designed to simulate a wide range of environmental conditions and is typically used in industry, research, and quality assurance applications. It enables precise testing under extreme temperature and humidity conditions, such as: - Material testing - Aging tests - Electronics and component testing - Climatic and environmental simulations Thanks to the large test chamber (1000 liters) and powerful control technology, both rapid temperature changes and constant long-term tests are possible. The system is water-cooled, allowing for stable and efficient operation. Technical Specifications: Control System: - Multi-touch controller with integrated program generator - Programmable test sequences - Side feed-through: 50 cm / 125 cm Temperature Range: - Temperature range: –70°C to +180°C Rjdpfx Aoyxmi Asc Esr - Heating rate: approx. 6 K/min - Cooling rate: approx. 5 K/min - Temperature stability: ±0.3 K Climatic Data (Humidity): - Climatic temperature range: +10°C to +95°C - Humidity range: 10% to 98% RH - Humidity stability: - Range I: ±1.5% RH - Range II: ±3% RH Dew Point Range: - I: +7°C to +94°C - II: –10°C to +7°C Dimensions: - External dimensions (HxWxD): 1950 x 1270 x 2245 mm - Internal dimensions (HxWxD): 900 x 1000 x 1100 mm - Test chamber volume: 1000 liters Electrical Data: - Connection: 400 V, 3/N, 50 Hz - Tolerance: +6% / –10% - Connected load: approx. 16.4 kW - Rated current: approx. 26.8 A Refrigeration System: - Refrigerants: R404A & R23 Weight: approx. 900 kg Important Information for Buyers – For Your Safety: The following work is carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: Used Scope of delivery: (See images) (Subject to change and errors in technical data – all details are non-binding!) We are happy to answer any further questions by phone.

Durumu: mükemmel (kullanılmış), Weiss Climatic Test Chamber WKL 100/70 -70°C to +180°C, Humidity 100 Liters Compressor has been replaced!! Air-cooled For sale is a professional climatic test chamber from Weiss Umwelttechnik. This unit is ideally suited for material testing, climate testing, as well as temperature and humidity simulations in industry, laboratories, or R&D environments. The test chamber enables precise testing conditions across a wide range of extreme temperatures and high humidity levels. Specifications for Temperature Tests: - Temperature range: -70 to +180°C - Temporal temperature deviation at center of the workspace: ±0.3 to ±1 K - Spatial temperature homogeneity (based on setpoint, range tmin to +150°C): ±0.5 to ±2 K - Rate of temperature change: - Heating: 3.5 K/min - Cooling: 3.5 K/min - Thermal compensation: max. 700 W Specifications for Climate Tests: - Humidification system tank capacity: approx. 13 L - Water quality: Demineralized - pH value: 6 – 7 - Conductivity: max. 20 μS/cm - Water consumption at +40°C, 92% RH: 2 L / 24 h - Temperature range: +10 to +95°C - Humidity range: 10 to 98% RH - Temporal temperature deviation at center of the workspace: ±0.3 to ±0.5 K - Spatial temperature homogeneity (based on setpoint): ±0.5 to ±1.5 K - Temporal humidity deviation at center of the workspace: = 1 to ±3 % RH Internal Dimensions: Height 400 mm, Width 470 mm, Depth 345 mm External Dimensions: Height 1776 mm, Width 745 mm, Depth 980 mm Mechanical Load Data: - Maximum load of test chamber floor: 10 kg - Per shelf: 10 kg - Total load on shelf supports: 50 kg Operating Data: - Test chamber lighting: 24V, 50W halogen bulb - Voltage: 1/N / PE AC 230 V ± 10% 50 Hz - Rated power: 3.5 kW - Rated current: 15.2 A - Required main fuse: 16A (slow-blow) - Ingress protection: Control cabinet IP 22, control panel IP 54 Heat Emission (for air-cooled chambers): - Max. heat emission to environment: 2500 W Noise Level: - Sound pressure level: approx. 59 dB(A) (measured in free field, 2 m in front, 1.0 m height) Feed-through: 50 mm diameter Interfaces: Ethernet port (RJ45), USB port Refrigerant: R404A / R23 Test chamber capacity: approx. 100 liters Weight: 210 kg Buyer Safety Information: The following checks and measures are performed on all chambers offered by us: Rodpsyw Nnfefx Ac Eor 1. Functional inspection and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of delivery: (See photo) (Technical data may be subject to change or error.) Should you have further questions, we are happy to assist you by phone.

Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 50 kg, A mechanical Rockwell hardness tester for HRC measurements is offered for sale. The device comes from our quality assurance inventory and has been regularly maintained. The last documented inspection was carried out by a specialist company in May 2020. Since then, the device has not been in productive use. It is ideally suited for workshops, toolmaking, or maintenance operations that require robust and reliable hardness testing. Technical specifications: - Testing method: Rockwell (HRC) - Mechanical force application - Selectable test force levels (see nameplate) - Heavy-duty construction - Stable testing table with fine-thread spindle - Analog display Rodpfxeyw Hzij Ac Esr Condition: - Used - Visually in good condition - Complete - Last inspection 05/2020 - Currently without a valid inspection certificate Commercial note: Mechanical Rockwell testers of this type are extremely durable and require little maintenance. The offered price enables cost-effective entry into hardness testing – significantly below the price of modern new equipment. Location: Eisenach Collection preferred (due to heavy weight), loading by arrangement possible. Sale is made under exclusion of any warranty and liability for material defects. The device is sold as seen.

Üretim yılı: 2014, Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 13RO210, We are offering this used Oxford Instruments PMI-MASTER Pro mobile spectrometer, year of manufacture 2014. Model year: 2014 Input voltage: 24 V DC Power: 500 VA The spectrometer was purchased new by us, has always been serviced by Oxford Instruments Analytical GmbH, and is in good working and overall good condition. Last maintenance: 09/2024. The device was in operation until 09/2025. Redpfxsywwr So Ac Ejr If you have any questions or require further information, please feel free to send us a message or give us a call.

Durumu: işlem için hazır (kullanılmış), Emcotest Emco-Test N3 N3D Sertlik Test Cihazı Sertlik Ölçer Test strok uzunluğu: yaklaşık 285 mm Çıkıntı: yaklaşık 170 mm Maksimum test parçası ağırlığı: yaklaşık 20 kg Makine ağırlığı: yaklaşık 35 kg Dilediğiniz zaman bir inceleme için gelebilirsiniz. Uygun fiyatlı bir nakliye şirketi sizin için organize edilebilir! Düzenli bir fatura alacaksınız. Yabancı müşteriler için, geçerli bir KDV numarası (Ust.Indent.Nr.) şartıyla, net fatura da düzenlenebilir. Ön satış hakkı saklıdır. Rjdpfx Asywuqxsc Ejr Mağazamızı ziyaret edin ve diğer tekliflerimize de göz atın. Belirtilen firma adları ve ticari markalar sahiplerinin mülkiyetindedir ve ürünleri tanımlamak ve açıklamak amacıyla kullanılmıştır. Teknik verilerdeki farklılıklar ve ürün açıklamasındaki hatalar mümkün olup, değişiklik hakkı saklıdır.

Durumu: mükemmel (kullanılmış), Vötsch Climate Test Chamber VT 4004 Tabletop Test Cabinet -40°C to +180°C For sale is a high-quality climate test chamber / tabletop test cabinet manufactured by the renowned company Vötsch Industrietechnik (model VT 4004). This device is ideal for use in laboratories, development, or industry and is perfectly suited for simulating temperature conditions when testing electronics, components, and materials. Rodjywg Amopfx Ac Eor Functions & Applications: - Temperature testing in the range of -40°C to +180°C - Uniform temperature distribution via air circulation system - Combination of cooling and heating - Digital control with display - Compact tabletop design (approx. 35-liter internal volume) - RS232 interface for connection to PC or measurement systems Technical Data: Manufacturer: Vötsch Industrietechnik Type: VT 4004 Volume: approx. 35 liters Cooling: air-cooled Refrigerant: R404A Electrical Data: Voltage: 1/N/PE AC 230V ±10% / 50 Hz Rated power: approx. 1.5 kW Rated current: approx. 7.5 A Dimensions: External: Width: 95 cm Height: 63 cm Depth: 83 cm Internal: Width: 32 cm Height: 40 cm Depth: 27 cm Condition: used Scope of supply: (see image) (Technical data and specifications subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Durumu: işlem için hazır (kullanılmış), Binder ED 240 / E2 drying oven, incubator, heating cabinet, brood cabinet No. 1147 Set temperature: 300°C Dimensions (internal): 800 mm × 500 mm × 600 mm (W x D x H) Dimensions (external): 1040 mm × 800 mm × 820 mm (W x D x H) Weight: approx. 85 kg Power: 2.70 kW Rjdpfx Acjyvun Ie Eer You are welcome to come for an inspection. We can also organize an affordable shipping service for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and also check out our other offers. The stated company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Durumu: mükemmel (kullanılmış), Despatch LCC2-14NV-3 Yılı: yaklaşık 2018 Maksimum Sıcaklık: 260 °C / 500 °F Güç: 415V - 1 Faz - 50 Hz Maksimum Akım: 25,2 Amper Kısa Devre Kesme Kapasitesi (S.C.C.R): 5 kA Isıtıcı: 16 kW 22,3 Amper En Büyük Motor Akımı: 2,1 Amper Rjdpjyvlausfx Ac Esr Toplam Motor Akımı: 3,2 Amper

Üretim yılı: 2009, Durumu: işlem için hazır (kullanılmış), Malzeme ve bileşenlerin korozyon testi için bir Köhler tuz püskürtme kabini mevcuttur. Test odası hacmi: 1000l, sıcaklık kararlılığı: +/-1K, su basıncı aralığı: 2,5bar-5bar, iç ölçüler X/Y/Z: 1250mm/950mm/760mm, makine ölçüleri X/Y/Z: yaklaşık 2100mm/1400mm, ağırlık: yaklaşık 350kg. Dokümantasyon mevcuttur. Yerinde inceleme mümkündür. Redpfxsyu T Dks Ac Ejr

Üretim yılı: 2013, Durumu: kullanılmış, Description: Plant Growth Chamber Manufacturer: Weiss Technik / Vötsch Model: SGC120 Usable volume: nominal 1200 liters Internal dimensions: 1310 x 675 x 1410 mm (W/D/H) External dimensions: 1440 x 810 x 1975 mm (W/D/H) The Fitotron SGC 120 from Weiss Technik is a highly flexible plant growth chamber, specially designed for Arabidopsis cultivation, insect incubation, and tissue culture. It stands out for providing maximum usable space with a compact footprint. Climatic conditions: Temperature range: Precisely controllable for day and night cycles via a color touch panel. Humidity: Optional humidification up to 80% relative humidity (RH) is possible. Dehumidification: For seed storage, the system can reduce humidity to as low as 15% RH at 4 °C. Usable volume: The chamber offers a nominal volume of approx. 1200 liters. Redpfx Asyu Svlec Eor Maximum growth height: Without intermediate shelves, the maximum growth height is up to 1275 mm (depending on the specific LED or lamp configuration). Footprint: Thanks to its minimal depth of only 810 mm, the unit fits through standard laboratory doors and requires only a small installation area. Condition: Used item, as shown in the pictures. For any questions, please contact us.

Durumu: mükemmel (kullanılmış), Heraeus Vötsch Type: VTS 7018-5 Heraeus Vötsch Temperature Test Chamber, Water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature change rate cooling: 6.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation: 4500 W Test chamber dimensions: width 580 mm, depth 450 mm, height 750 mm External dimensions: width 870 mm, depth 1280 mm, height 1575 mm Viewing window: width 300 mm x height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW; rated current: 21 A Fuse (on-site): 32 A slow-blow Sound level at 1m distance (free-field measurement): < 63 dB(A) Side port: 50 cm / 125 cm The chamber is water-cooled Refrigerants: R452A and R23 Rjdpfeyu Rhgex Ac Ejr Weight approx. 460 kg Important safety information for buyers: The following measures are performed on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and data subject to change and errors!) We are happy to answer further questions for you by phone.

Üretim yılı: 2011, Durumu: iyi (kullanılmış), Cam tabla Rodeyu Ivnjpfx Ac Eor Aydınlatmalı 6 kamera İki kap + bir tahrik ünitesi Entegre besleme bunkeri 25 L / 50 kg, kumanda cihazı ile Skako Bunker 125 10 kasa için yükleyici Ekstra lens TC1224 + tutucu Ekstra lens TC23056 + tutucu Kesintisiz güç kaynağı (UPS) dahil değildir

Üretim yılı: 1999, Durumu: kullanılmış, We are offering this used Vötsch VT 7100, year of manufacture 1999. Device number: 59566005700010 Year of manufacture: 1999 Refrigerant: R 404A Refrigerant charge: 4.2 kg Permissible operating overpressure: 25 bar Standby pressure: 70 bar Voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Wiring diagram no.: EPL 66912 System diagram no.: RPL 67612041W If you have any questions or need more information, please feel free to send us a message or call us. Rsdpeyu Hwqsfx Ac Esr

Üretim yılı: 2022, Durumu: işlem için hazır (kullanılmış), Dönme ve salınım ölçümleri için modüler, kompakt Anton Paar viskozimetre mevcuttur. Ölçüm plakası: PP25, ölçüm plakası çapı: 25 mm, maks. tork: 125mNm, min. tork: 0,4µNm, tork çözünürlüğü: 100nNm, maks. devir: 1500 dev/dk, numune sıcaklığı min./maks.: -20°C/220°C, sıcaklık kontrol cihazı: P-PTD 220, maks. ölçüm hücre basıncı: 150 bar. Makine boyutları X/Y/Z: yaklaşık 400 mm/700 mm/550 mm, ağırlık: yaklaşık 35 kg, kontrol: RheoCompass Light. Dokümantasyon mevcut. Yerinde inceleme mümkündür. Redpfx Aeyuyvmoc Eor

Üretim yılı: 2020, Durumu: mükemmel (kullanılmış), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Clamping tool from DK Fixiersysteme - 3-axis CNC control - High-resolution CCD matrix camera - 1.5x magnification - Incident light illumination via LED ring light, with 4 individually switchable sectors and 1 switchable ring Redpfx Ajyuut Tec Esr - Precision measuring stage in X and Y axes - Diode laser for positioning assistance - Joystick and trackball for axis movement with fast/slow switching Camera-assisted measurement data acquisition Precise edge detection in transmitted and incident light, enabled by advanced image processing algorithms Compact and handy – with high performance Fast operation with maximum measuring precision Special features: - Includes Renishaw TP 200 touch probe system - Switchable LED surface lighting - Diode laser for positioning aid With a measuring area of 300 mm × 200 mm × 200 mm, it is particularly suitable for punched parts, plastic parts, rubber parts, milled parts as well as tools, profiles and circuit boards. Highlights of the measuring microscope include the camera-assisted data acquisition, quick operation, and its high precision. It also offers highly accurate edge detection in both transmitted and incident light using intelligent image processing algorithms. Despite its robust performance, the WM 1 300 CNC is compact and easy to handle, with dimensions of only 900 mm × 950 mm × 950 mm.