Voitl engineering KG

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2007, Üretici: HAAS Üretim yılı: 2007 MODEL: SL-40 Üretim saatleri: 6200 Kontrol ünitesi üreticisi: HAAS X ekseni hareket mesafesi: 800 mm Z ekseni hareket mesafesi: 1250 mm Kodpey Tytqefx Acnodl Takım sayısı: 12 İğ motor gücü: 30 kW İğ devir hızı: 2400 RPM Maks. torna çapı: 648 mm Bar geçiş çapı: 103 mm Tam programlanabilir punta Makine ağırlığı: 9000 kg

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2020, çalışma saatleri: 8.977 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: MM0008-000192, torna boyu: 1.020 mm, torna çapı: 540 mm, X ekseni hareket mesafesi: 565 mm, Y ekseni hareket mesafesi: 170 mm, Z ekseni hareket mesafesi: 1.050 mm, kontrolör modeli: FANUC Series 31i-MODEL B, TEKNİK DETAYLAR Torna boyu: 1.020 mm Torna çapı: 540 mm Yatak klavuzu üzerinde devir çapı: 750 mm Üst kızak üzerinde devir çapı: 540 mm Planyalı kızak üzerinde devir çapı: 270 mm X ekseni hareket mesafesi: 565 mm Y ekseni hareket mesafesi: 170 mm Z ekseni hareket mesafesi: 1.050 mm X ekseni hızlı travers: 36 m/dak Y ekseni hızlı travers: 26 m/dak Z ekseni hızlı travers: 36 m/dak İş mili motor gücü: 22 kW Ana iş mili maksimum devir: 5.000 devir/dak İş mili deliği: 76 mm Freze mili maksimum devir: 12.000 devir/dak Çubuk geçişi: 76 mm Maksimum çubuk çapı: 65 mm İş mili kafası: A2#6 İş mili çapı: 110 mm MAKİNE DETAYLARI Kontrol ünitesi: FANUC Series 31i-MODEL B Ayna dış çapı: 210 mm Giriş akım tipi: Trifaze Boyutlar & Ağırlık Boyutlar (U x G x Y): 4.850 x 2.525 x 2.805 mm Toplam ağırlık: 12.000 kg Çalışma saati: 8.977 saat DONANIM Dokümantasyon/Kullanım Kılavuzu Kedpfxsy Tw Uls Acnedl

Koşul: mükemmel (kullanılmış), Üretim yılı: 2020, Fonksiyonellik: tamamen fonksiyonel, Technical details Turning diameter: 760 mm Turning length: 1540 mm Control system: Fanuc 31i-B Machine dimensions: 5500 x 2700 x 3110 mm Chip conveyor: 6900 x 2400 mm Total power requirement: 94.42 kW Machine weight approx.: 15.5 t Space requirements approx.: m Additional information Turning center with infinitely adjustable swiveling milling head and Y-axis, motorized lower turret, and sub-spindle. Condition: Very well maintained, machine comes from a company liquidation. Operating hours: Controller on: 13,127 hours Running time: 3,833 hours Processing time: 2,835 hours The upper head is supplied by a tool magazine and can turn or mill at various angles. Even highly complex parts can be fully machined without repositioning. CNC control: Fanuc 31i-B Turning diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/cont.): 76/76 mm Y-axis travel: 230 mm (±115 mm) Chuck (sub-spindle) ASA connection: A2-8 Rotational speed: 4000 rpm AC motor power (cont./30 min.): 22/26 kW Turning/milling head B-axis rotation/indexing: 240° (±120°) Kodpey Tv Ukefx Acnsdl Tool holder: Capto C6 Rotational speed: 12,000 rpm AC motor power 30 min.: 15/18.5 kW 40-position tool changer Tool turret Number of driven tools: 12(12) Driven tools power: 7.8 kW/30 min.

Koşul: ikinci el, Üretim yılı: 2007, Fonksiyonellik: tamamen fonksiyonel, Technical Details Turning diameter: 100 mm Turning length: 320 / 345 mm Control: Siemens 840 D Swing diameter: 145 mm Spindle distance: 580 mm Slide I: Slide I - Cross travel (X1): 220 mm Slide I - Longitudinal travel (Z1): 320 mm y-axis: +/- 30 mm Rapid traverse (X/Y/Z): 30/15/30 m/min Slide II: Slide II - Cross travel (X2): 120 mm Kdsdpfxsy Tvn Re Acnol Slide II - Longitudinal travel (Z2): 345 mm Rapid traverse (X/Z): 30 m/min Sub-spindle: Sub-spindle travel (Z3): 380 mm Cross traverse (X3): 145 mm Bar diameter max.: 36 mm Rapid traverse (X/Z): 20/30 m/min Drive capacity (40/100% DC): 26/21 kW Spindle speeds: 40 - 7200 rpm Total connected load: 42 kVA Machine weight approx.: 5.3 t Space requirement approx.: m Additional Information CNC turning and milling center with Y-axis, 2 turrets, sub-spindle and bar feeder. A total of more than EUR 44,000 has been invested in essential repairs and maintenance via DMG MORI over the last 5 years (replacement of main spindle S4, ball screws, etc.). Equipment: - CNC control SIEMENS 840 D powerline - Number of controlled axes: 9 - 2 x C-axis - Y-axis in the upper turret - Pick-up device with gripper - 2 turrets, make SAUTER, with 12 driven tool stations each, VDI 25 - Tool drive with a speed range of 30 to 6000 rpm - Coolant unit with paper band filter - Chip conveyor - Collet chuck on main and sub-spindle - Bar loading magazine, make IEMCA BOSS 332 E 32 L, max. bar length 3180 mm

Koşul: iyi (kullanılmış), Üretim yılı: 2022, Fonksiyonellik: tamamen fonksiyonel, Technical Details Turning diameter: 820 mm Turning length: 4,500 mm Control: Siemens Si 840 D sl Total power requirement: kW Machine weight approx.: t Kdedpfsy Tu U Njx Acnjl Space requirement approx.: m Additional information Original purchase price: EUR 1,217,683.00 Working time as of Feb. 2025 Operating hours = 16,085 h Main spindle = 616 h Milling spindle = 369 h CNC control: Siemens Sinumerik Si 840D sl Max. distance between centers: 4,500 mm Working height: 1,375 mm Carriage travel X-axis: -15 to +725 mm Carriage travel Y-axis: -245 to +4,756 mm Swing diameter over cross slide: 780 mm Swing diameter over bed: 820 mm C-axis, minimum increment +/-0.001° Main spindle A15 with BVG; 3,135 Nm; / 2,000 rpm Spindle head DIN 55026 form A 15 Max. speed: 3,000 rpm Max. torque: 3,135 Nm Drilling/milling unit Milling power (40/100% duty cycle): 36.5 / 29.8 kW Torque up to 1,110 rpm (40/100% duty cycle): 328 / 261 Nm Max. speed: 5,000 rpm Swivel range (B-axis): -105 to +95° Vertical travel (Y-axis): -250 to +250 mm Steady rest SR5 with eccentric fine adjustment: 45–310 mm Tool system: C8 Tool magazine (2 magazines): 144 positions Tailstock Quill diameter MK6: 180 mm Quill stroke: 170 mm Quill force (adjustable): 5–28 kN Quill fine adjustment: +/-0.15 mm Additional equipment Coolant tank capacity: 990 l Workpiece measurement: MC (Renishaw) Software: Gear Hobbing &more

Koşul: iyi (kullanılmış), Üretim yılı: 2006, Fonksiyonellik: tamamen fonksiyonel, Technical Details Turning diameter: 660/275 mm Turning length: 1498 mm Control unit: Fanuc/Mori Seiki MSX 701 Total power requirement: 90 kVA Machine weight approx.: 26.6 t Space requirements approx.: 5301 x 2997 x 2788 mm Additional Information 9-axis CNC turning and milling center * CNC control unit Fanuc MSX-701 * Upper milling spindle (B-axis) as a fully functioning 4th axis, positioning accuracy 0.0001° * 40-position tool magazine * 10-position lower turret, all positions driven * 2 x 3-jaw quick-change chucks KNCS-N 315/91 * KNOLL high-pressure coolant system, adjustable pressure 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter unit * Chip conveyor * Blow-off system for main spindle chuck (controlled via M-function) * Blow-off system for tool edge (controlled via M-function) * Coolant gun incl. accessories * Oil mist extraction system * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Island and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Program memory expansion to 8 MB * Program restart * 3-stage signal lamp * Memory card 512MB (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. workpiece length: 1498 mm Max. bar capacity: 90 mm Travel Paths: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120°, full B-axis indexed at 1° and clamped at 0.0001° X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (sub-spindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and sub-spindle: Spindle speeds steplessly (spindle 1 + 2): 30-3000 rpm C-axis (spindle 1 + 2): 0.001° Main spindle motor: 22/18.5 kW Sub-spindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc Turret: Number of tool stations: 10 Rotational speed of driven tools: 6000 rpm Drive power: 5.5/3.7 kW Milling Spindle Head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool Changer: 40 positions Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement: 90 kVA Overall dimensions (L x W x H): 5301 x 2997 x 2788 mm Machine weight: 26.6 t Accessories: Measuring arm (pictured) for tool measurement in the machine Kdjdey Tu Tfjpfx Acnel Tool holder + box, reducing sleeves, driven tools Chuck jaw set Collet set

Koşul: iyi (kullanılmış), Üretim yılı: 2000, Fonksiyonellik: tamamen fonksiyonel, Teknik Detaylar Torna çapı 420 mm Torna uzunluğu 650 mm Kontrol ünitesi Okuma OSP-U100L İş mili deliği 95 mm İş mili devir hızı 2800 dev/dak X ekseni hareket mesafesi 300 mm Z ekseni hareket mesafesi 675 mm Ana tahrik motoru 22/30 kW Makine ağırlığı yaklaşık 5,5 t Alan ihtiyacı yaklaşık 2700 x 1900 x 1885 mm Ek bilgiler İlk çalıştırma 2001. Kdjdpjy Tuu Ajfx Acnel - 12 istasyonlu torna kafası (VDI 40), tahrikli takım istasyonları, 3000 dev/dak, 5,5 kW - Hengst Filtration iç alan emişi (Üretim yılı 2023) - Touchsetter, takım ölçümü - C ekseni (ana iş mili) - Takım kırılma ve aşınma kontrolü - 3 çeneli ayna, Kitagawa B210, Ø250 - Punta - Soğutma sıvısı beslemesi, aynı zamanda takımla birlikte - IGF diyalog programlama - Talaş konveyörü

Koşul: ikinci el, Üretim yılı: 2007, Turning diameter: 300 mm Turning length: 600 mm Control: FANUC, 18i-TB Turning diameter over bed slide: 230 mm Travel X1: 165 mm Travel Z1: 700 mm Travel X2: 190 mm Travel Z2: 720 mm Travel Y: +/- 50 mm Main spindle bore: 76 mm Main spindle speed: 5,000 rpm Main spindle motor: 22 kW Spindle torque: 208 Nm Sub-spindle bore: 76 mm Sub-spindle speed: 5,000 rpm Sub-spindle motor: 22 kW Spindle torque: 208 Nm Turret: 2 x 12 stations Number of live tool stations: 2 x 12 Live tool speed: 5,000 rpm Kdjdpfx Acjy Tplionjl Torque (live tool): 47 Nm Live tool drive power: 5.5 kW C-axis resolution: 0.001° Rapid traverse X + Z axes: 20 / 40 m/min Rapid traverse Y-axis: 7.5 m/min Total power requirement: 68.4 kVA Accessories: - Kitagawa collet chuck, CRS 66, on main spindle - Hydraulic 3-jaw chuck Kitagawa, BB208, 210 mm dia., on sub-spindle - Various tool holders for turret - Hydrabar-type short bar loader HYDRAFEED, MULTIFEED MX-1B, for bar diameters 3 - 80 mm and bar lengths up to 1650 mm - Chip conveyor - Coolant unit with band filter system

Koşul: iyi (kullanılmış), Üretim yılı: 2016, Fonksiyonellik: tamamen fonksiyonel, CNC Lathe HAAS ST-40L, Year 2016, C-axis, Driven Tools, Tailstock, Steady Rest, Extended Bed Version The machine is equipped with C-axis, driven tools, programmable tailstock, hydraulic Kitagawa steady rest, chip conveyor, and accessories. The machine is under power and can be inspected and tested by prior arrangement. Machine Specifications Manufacturer: HAAS Automation, Inc. Model: ST-40L Year of Manufacture: 01/2016 Serial Number: 3104909 Control System: HAAS CNC Power Supply: 3 × 400 V / 50 Hz Machine Weight: approx. 14,062 kg Version: Extended bed ST-40L Technical Specifications Max. swing over bed: 876 mm Max. turning diameter: 648 mm Max. turning length: 2,032 mm X-axis travel: 432 mm Z-axis travel: 2,032 mm Working feeds X/Z: 18 / 8.1 m/min Rapid traverse X/Z: 18 / 8.1 m/min Positioning accuracy: 0.005 mm Repeatability: 0.003 mm Spindle Spindle: A2-8 Spindle bore: 102 mm Spindle drilling: 117 mm Max. spindle speed: 2,400 rpm Spindle power: 30 kW / 40 HP Spindle torque: 1,898 Nm at 150 rpm Chuck: Kitagawa B15 hydraulic 3-jaw, diameter 381 mm Turret and Driven Tools Turret: 12-position hybrid turret Tool mounting: 6× VDI 40 / 6× BOT Driven tool positions: every second turret position Driven tool drive: yes C-axis on spindle: yes Max. driven tool speed: 0–6,000 rpm Driven tool power: 9.3 kW C-axis positioning: 0.001° Full-contour C-axis: yes Tailstock and Steady Rest Programmable tailstock: yes, servo-driven Tailstock taper: MT5 Tailstock force: 1,334–6,672 N Hydraulic steady rest: Kitagawa 1131 Steady rest clamping range: 110–310 mm Independent steady rest oil lubrication: yes Kodpfx Acjy Tnwwjnedl Max. steady rest speed: 650 rpm Max. roller clamping force: 20 kN Machine Equipment The machine is equipped with: - HAAS CNC control, - C-axis, - driven tools, - 12-position turret (6× VDI / 6× BOT), - programmable tailstock, - Kitagawa 1131 hydraulic steady rest, - Kitagawa B15 hydraulic chuck, - chip conveyor, - coolant unit, - automatic central lubrication, - manual coolant rinse gun, - manual air blow-off gun, - remote jog handle, - USB port, - work area lighting, - set of tool holders and accessories. Accessories Accessories as shown in the photos, notably: - ER32 driven tool holders, - VDI/BOT tool holders, - set of hard jaws for Kitagawa B15 chuck, - additional jaws, sleeves, and clamping elements. Operating Hours According to the control system display: - Cycle start time: approx. 7,208 h - Cutting time (feed engaged): approx. 5,989 h Machine Condition The machine is currently in operation / under power. Inspection and testing possible by prior arrangement. Technical condition corresponds to the normal wear of a used machine.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2009, çalışma saatleri: 29.000 h, Fonksiyonellik: tamamen fonksiyonel, Donanım: dokümantasyon / kılavuz, The INDEX C200 - manufactured in 2009, is a powerful CNC production turning center equipped with a FANUC 31i control system, main and counter spindles, and a 65 mm bar capacity. This machine features the high-specification three-turret configuration, with Turrets 1 and 2 each supporting X, Z, and Y axes, while Turret 3 is dedicated to machining operations on the counter spindle. All three disc turrets have 10 stations each, enabling highly flexible complete machining thanks to driven tools with up to 6,000 rpm. With gantry part removal, conveyor belt, C-axes on both main and counter spindles, and high-performance spindle drives, the machine is especially suited for productive series manufacturing of complex turned/milled parts. Control system: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disc turrets Bar capacity: 65 mm Machine bed: vertically arranged grey cast iron bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle - Bar capacity: 65 mm - Spindle nose diameter (front bearing): 110 mm - Spindle nose: ISO 702/1, size 140 cylindrical - Chuck diameter: 160 mm - Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle - Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle - Speed: 5,000 rpm - C-axis: resolution 0.001° Counter Spindle - Bar capacity: 65 mm - Spindle nose diameter (front bearing): 110 mm - Spindle nose: ISO 702/1, size 140 cylindrical - Chuck diameter: 160 mm - Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle - Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle - Speed: 5,000 rpm - C-axis: resolution 0.001° - Counter spindle Z-axis travel: 700 mm - Z-axis rapid traverse: 50 m/min Tool Carriers / Turrets Equipped with 3 disc turrets, each with 10 stations. Tool system at 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool Carrier 1 - X, Z, and Y axes - 10 stations - X-axis: 110 mm - Z-axis: 320 / 550 mm according to documentation - Y-axis: 100 mm, ±50 mm - Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool Carrier 2 - X, Z, and Y axes - 10 stations - X-axis: 110 mm - Z-axis: 550 mm - Y-axis: 100 mm, ±50 mm - Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool Carrier 3 - X-axis - 10 stations - Used exclusively for machining at the counter spindle - X-axis: 180 mm - Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Additional technical features as per documentation: - Gantry loader system with numerically controlled Z-axis - Part discharge from main or counter spindle onto conveyor belt - Remnant part removal from the main spindle into remnant container Gantry loader: - Traverse speed: 100 m/min - Traverse range: 70 mm - Max. workpiece diameter: 90 mm - Max. workpiece length: 250 mm - Max. remnant length: 250 mm - Max. workpiece weight: 3.5 kg Hydraulic system: - Delivery rate: 19 l/min - System pressure: 90 bar - Hydraulic tank: 40 l Cooling circuit: - Delivery rate: 19 l/min - Cooling unit capacity: 13 kW Coolant system: - Pump flow rate: 80 l/min / 8 bar - Tank capacity: 300 l Kdedjy Tmhzepfx Acnjl Chip conveyor: - Chip discharge height: 1,250 mm

Koşul: ikinci el, Üretim yılı: 2006, Fonksiyonellik: tamamen fonksiyonel, Makine ölçüleri: 2,9 m x 2,8 m x 2,9 m Makine ağırlığı: yaklaşık 7 ton Üretim yılı: 2006 Eksen hareketleri: X 1050, Y 530, Z 510 (150 tabla üstünde) Devir hızı: maks. 12.000 d/dak. Motorlu mil: SK40 Ölçüm probu: Renishaw OMP 60 Ölçüm ünitesi: Mazak Dahili soğutma (IKZ): 25 bar Harici soğutma Takım magazini: 30 yer Menteşe bantlı konveyör Makine kontrol ünitesi: MAZATROL M640 • Her biri sol ve sağ versiyon olarak birer makine (talaş konveyörü sol veya sağda) • Çeşitli takım tutucular ayrıca satın alınabilir. • GERGİ aparatı (mengene) DAHİL DEĞİLDİR! Kjdjy Tlu Tepfx Acnedl • EMİŞ SİSTEMİ YOKTUR Belirtilen fiyat yalnızca bir makine içindir.

Koşul: iyi (kullanılmış), Üretim yılı: 2005, EMCOMILL FB 6 (Dijital cetveller X, Y, Z ile) Takım freze makinesi, 63-3150 dev/dak arasında 18 iş mili devri, X, Y, Z eksenlerinde 18 ilerleme, DIN 8615'e göre takım hassasiyeti, kızak hareketleri X/Y/Z 700/500/500 mm, güç 5,5 kW (100% ED), hidrolik takım sıkma, takım tutucu DIN 69871 SK 40, elektrik bağlantısı 400/50/3, X/Y/Z eksenlerinde Heidenhain ölçüm cetvelleri dahil, makine CE'ye uygun, karşı tutucu olmadan, çalışma alanı korumalı. ISO9001: 1994 standardına göre üretilmiştir. Üretim yılı: 2005. F4UT3901. Kjdpey Tkghjfx Acnsdl

Koşul: iyi (kullanılmış), Üretim yılı: 2021, Fonksiyonellik: tamamen fonksiyonel, Makinenin 920 iğ saati vardır Mori Seiki NLX 2000 torna / freze merkezi, Üretim yılı: 2021, Kontrol ünitesi: Celos 730 UM / Mapps, X/Z ekseni hareketi: 260 / 590 mm, Y ekseni: +/- 50 mm, Çubuk geçiş çapı: 65 mm'ye kadar, C eksenli ana iş mili, Ana iş mili devir hızı: 5.000 dev/dk'ya kadar, 12 istasyonlu BMT taret, Tahrikli takımlar, NC kuyruk mili, Karşı iş mili, Karşı iş mili devir hızı: 6.000 dev/dk'ya kadar, Talaş konveyörü, Kdsdpfx Acjy Ti Uwonel Yüksek basınçlı soğutma sistemi, Yağ buharı separatörü, Makineye entegre manuel takım ön ayar cihazı (dönüşlü), Ana ve karşı iş mili için parça tutucu, Irco kısa çubuk şarjörlü besleme sistemi ILS, Dişli frezeleme, Gear Skiving,

Koşul: iyi (kullanılmış), Üretim yılı: 2023, Spinner TC 600, üretim yılı 2023, Fanuc 32i TB kontrol ünitesi, X/Z ekseni hareket mesafesi 275/700 mm, talaş konveyörü, punta, 16 istasyonlu taret, VDI 40, C ekseni, tahrikli takımlar, üç çeneli ayna Ø 250 mm. Kjdpfxoy Thmlj Acnjdl

Koşul: iyi (kullanılmış), Üretim yılı: 2006, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 187859, torna çapı: 380 mm, maksimum mil hızı: 5.000 dev/dak, dönüş hızı (maks.): 4.500 dev/dak, çubuk geçişi: 65 mm, toplam ağırlık: 4.900 kg, Mazak QTN-200MS CNC torna ve freze merkezi, üretim yılı 2006 Alt iş mili ve tahrikli takımlar ile birlikte Ana iş mili: Kitagawa aynası ve Hainbuch pens aynası 35-5000 dev/dk Alt iş mili: Kitagawa aynası 35-6000 dev/dk Toplam 19 takım tutucu, 5’i tahrikli takım Çeneler, sıkma kapları, anahtarlar ve resimdeki aksesuarlar dahildir 12’li takım değiştirici (revolver) Parça yakalayıcı, talaş konveyörü >>Çubuk sürücü: FMB SL80 V (Yıl: 2020) >>Taşıma bandı Makine çok iyi bakılmış ve düzenli olarak servis edilmiştir. Hidrolik yağları, gres ve çalışma sıvıları yakın zamanda değiştirildi. Kdsdpfx Acsy Tb D Dsnol Makine talaşlı çalışmada görülebilir. Model: QTN-200MS Seri numarası: 187859 Ağırlık: 4900 kg Ağırlık: 10780 lbs Üretim yılı: 2006 Sorularınız veya daha fazla bilgi için lütfen bize mesaj atın veya arayın.

Koşul: mükemmel (kullanılmış), Üretim yılı: 1999, 1 Çift aynalı ve çift taretli CNC işleme torna tezgahı WT 250 NAKAMURA, 1999 model, içerir: Kdodey Ta Iuopfx Acnol 4 eksen 1 çubuk sürücü

Koşul: mükemmel (kullanılmış), Üretim yılı: 1998, 1 adet 1998 model çift tokmaklı ve çift taretli CNC işleme tornası WT 250 NAKAMURA, içeriği: 4 eksen, 1 adet MASTER 880 IEMCA çubuk besleyici Kdsdjy Ta Ihepfx Acnsl

Koşul: iyi (kullanılmış), Üretim yılı: 2005, 1 adet 5 eksenli CNC torna TOME NTJ NAKAMURA 2005 model 1 adet LNS çubuk besleyici Kjdpfx Acsy Ta Hqjnsdl

Koşul: ikinci el, Üretim yılı: 2011, Technical details: Standard turning diameter: 200 mm Turning length: max. 810 mm Control: MSX-701 MAPPS IV Swing diameter over bed: 800 mm Max. distance between centers: 1,130 mm Max. turning diameter: 320 mm Max. workpiece diameter: 300 mm Bar diameter: 65 mm Travel X-axis 1: 210 mm Travel X-axis 2: 210 mm Travel X-axis 3: 210 mm Travel Y-axis 1: 110 (+65 / -45) mm Travel Y-axis 2: 110 (+45 / -65) mm Travel Z-axis 1: 300 mm Travel Z-axis 3: 300 mm Travel Z-axis 2: 810 mm Travel B-axis: 870 mm Spindle speed range: 5,000 rpm Number of spindle speed ranges: 2 Spindle nose: JIS A2-6 Spindle bore: 73 mm Spindle bearing diameter: 120 mm C-axis: 0.001° Maximum bar diameter: 65/52 mm Number of turrets: 3 Number of tool stations: 16 x 3 = 48 positions Shank height for square tool: 20 mm Shank diameter for boring bar: 32 mm Turret indexing time (4 stations): 0.18 sec Number of driven tools: 16 x 3 = 48 positions Max. speed of driven tools: 6,000 rpm Turning tool machining capacity: M16 / Ø16 Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 20 m/min Rapid traverse Z-axis: 50 m/min Drive power - spindle motor: 25 / 22 kW Drive power - driven tools: 7.5 / 5.5 kW Total power requirement: 92.7 kVA Machine weight approx.: 9.4 t Space requirement approx.: 4.0 x 2.8 x 2.4 m Accessories: Chip conveyor Coolant system C-axis main and sub-spindle Y-axis: 2x Part counter Total counter Tool presetting Kedpfxey S Tm Uj Acnjdl Parts gripper from above with conveyor belt Spindle 1 power chuck SMW KNCS-N 210 / 52 mm Spindle 2 collet chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Lehmann loading robot with infeed and outfeed belt for shaft parts The NZ2000 T3Y2 is equipped with 2 spindles and 3 turrets. Two turrets feature a Y-axis function with integrated milling motor. This allows simultaneous machining with 3 turrets. High-performance and high-speed machining can be achieved with up to 48 driven tools. For automatic loading, a Lehmann robot with infeed and outfeed belt for shafts is used. The machine has been maintained by our own maintenance department and Mori Seiki. The machine can also be sold without the robot.

Koşul: yeni gibi (sergi parçası), Üretim yılı: 2024, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: AS0456, SPINNER TTS-Duplex High-Performance Precision Lathe with multiple slide systems for simultaneous machining with multiple turrets in parallel Featuring TWO turrets, positioned in the upper right and lower left positions of the working area Slide system 1 (upper right) with axis travels of X1 = 180 mm Y1 = 90 mm (+-45 mm) Z1 = 704 mm Slide system 2 (lower left) with axis travels of X2 = 180 mm Z2 = 620 mm Tool holder system at the turret: BMT45 SPINDLE 1 version up to 5,000 rpm - 65 mm Bar capacity 65 mm SPINDLE 2 version up to 5,000 rpm - 65 mm Bar capacity 65 mm CNC CLAMPING FORCE ADJUSTMENT on spindle 1 FOOT SWITCH CNC CLAMPING FORCE ADJUSTMENT on spindle 2 SPINDLE RINSING spindle 2 FOOT SWITCH Controller: SIEMENS 840DE with the following standard features: - SPINNER SPIOS 24" touch panel for I4.0 applications Ksdjy S Tlwepfx Acnsdl - Swiveling and tilting operating panel for optimum ergonomics - Incl. engraving cycles - 24" LCD flat color screen with multi-touch functionality - User memory 2 GB - 15 zero point offsets - 1 free USB interface - Ethernet interface standard SPINNER MULTI-CONTROL-WHEEL at the control panel for the following functions integrated into one operating element: - Manual pulse generator function for jog mode - Feed override in automatic mode - Start button and feed adjustment in single block setup mode, self-resetting to 0% at end of block -> All key setup functions integrated into one control element - SHOPTURN - 4-axis machining with rotary axis - 3D SIMULATION of the finished part - REMNANT DETECTION - DXF reader - 4-axis turning/balanced cutting - 'FORCE-CONTROL' - movement to fixed stop - Gear skiving - skiving of straight or helical internal and external gears Energy-saving function incl. automatic machine shutdown CHIP CONVEYOR as hinged belt conveyor discharging to the right side, including integrated coolant tank capacity approx. 200 l and return pump 100 l/min at 0.9 bar. COOLANT SYSTEM as auxiliary tank fully wired incl. mounting parts; Capacity approx. 800 l, including low-pressure pump 50 l/min at 15 bar, high-pressure pump 22 l/min at 80 bar Rinsing pistol inside work area EXTRACTION NOZZLE D=200 mm AUTOMATIC DOOR for work area UNIMAG interface for bar feeder magazines PARTS CATCHER DEVICE for picking up workpieces PARTS CONVEYOR BELT STANDARD DOCUMENTATION IN GERMAN including machine manual and CNC manuals delivered digitally on the control unit. STANDARD PAINTWORK two-tone in light grey RAL7035 and blue grey RAL5008 Electrical configuration to EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Supply frequency 50Hz (+/-2%) TN system (5-wire) Toolholder package Notes: The price includes warranty services only within Germany. For new and demo machines, the images may not depict the actual machine but a similar reference machine. Pictured accessories such as chucks or tool holders are only included in the delivery scope if listed in the technical specification. Please enquire for a detailed ex-works offer. Visit our factory near Munich or one of our showrooms. We may have other comparable machines available. Interim sale expressly reserved.

Koşul: ikinci el, Üretim yılı: 1998, Fonksiyonellik: kontrol edilmemiş, Kontrol: FANUC Series 0i-T Yatak üzerinden parçanın dönme çapı: 610 mm Köprü kızak üzerinden dönme çapı: 430 mm Maks. torna çapı: 500 mm Maks. torna boyu: 1500 mm Mil deliği: D102 mm Devir aralığı: 50 – 2800 devir/dak İlerleme aralığı: 1 – 10.000 mm/dak Kdjdsy S Tbfspfx Acnel Hızlı hareketler (X / Z eksenleri), X: 10 m/dak, Z: 15 m/dak Mil kafası: A2-11 Revolver: 12 pozisyonlu Takoz bağlantısı: VDI50 Fener mili pabucu: MT6 Tahrik gücü: 26 kW Elektrik ihtiyacı: 36 kW Ağırlık: 11.500 kg Ölçüler UxGxY = 4200 x 2200 x 2100 mm Aksesuarlar, donanım - Talaş konveyörü - Soğutma sistemi - Fener mili pabucu - Transformatör - Elektronik el çarkı - Takım ölçüm kolu Makine çalışmaya hazır durumdadır.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2012, HAAS ST-10Y CNC Drehmaschine mit C-Achse und Y-Achse Baujahr: 2012 Kjdpjy S S I Rsfx Acnedl Technische Daten: Futterdurchmesser: 165 mm Max. Umlaufdurchmesser: 419 mm Max. Drehdurchmesser: 279 mm Max. Drehlänge (abhängig von der Spannvorrichtung): 406 mm Stangendurchlass: 44 mm Verfahrwege: X-Achse: 200 mm Y-Achse: ±51 mm Z-Achse: 406 mm Eilgang: X-, Y-Achse: 12,0 m/min Z-Achse: 30,5 m/min Spindelaufnahme: A2-5 Leistung: 15,0 PS / 11,2 kW Max. Drehzahl: 6.000 min⁻¹ Max. Drehmoment: 102,0 Nm bei 1.300 min⁻¹ Spindelrohrdurchlass: 46 mm Spindelbohrung: 58,7 mm C-Achse Hauptspindel: Positionierung (±): 0,02° Bremshaltemoment: 190 Nm Steuerung: Interpolierte Bewegung und Positionierung Reitstock: Kegeltisch: MT3 Hydraulischer Pinolenhub: 95 mm Manuelle Positionsverschiebung: 508 mm Revolver: 12 Stationen Angetriebene Werkzeuge, max. Drehzahl: 4.000 min⁻¹ Werkzeugaufnahme: BMT45 Kühlmittelkapazität: 114 l Maschinengewicht: 3.600 kg Zubehör/Optionen: - Ausgestattet mit C-Achse und Y-Achse - Angetriebene Werkzeughalter, 2 axial und 2 radial - Späneförderer - Hydraulikfutter - Spannzangenfutter - 10 feste Werkzeughalter - Werkstückabgreifer - Werkzeugmesstaster - Fußpedale für Futter- und Reitstockbedienung Unter Strom in unserem Lager – Besichtigung und Test jederzeit möglich!

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 1999, çalışma saatleri: 12.500 h, Fonksiyonellik: tamamen fonksiyonel, kontrolör modeli: OSP 7000M, Donanım: talaş konveyörü, TEKNİK DETAYLAR Takım değiştirici: 24 BT40 Ksdpfxey S Sw Ej Acnodl MAKİNE DETAYLARI Kontrol ünitesi: OSP 7000M HS: Geniş iş mili GS: Standart iş mili Soğutma sıvısı pompası: 8 bar İş mili saatleri: 12.500 h DONANIM Talaş konveyörü

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2008, çalışma saatleri: 10.500 h, Fonksiyonellik: tamamen fonksiyonel, torna çapı: 630 mm, X ekseni hareket mesafesi: 580 mm, Y ekseni hareket mesafesi: 160 mm, Z ekseni hareket mesafesi: 935 mm, kontrolör modeli: Okuma OSP P200L, TECHNICAL DETAILS Swing diameter over carriage: 630 mm Machining diameter: 630 mm Distance between centers: 900 mm Travel X-axis: 580 mm Travel Y-axis: 160 mm Travel Z-axis: 935 mm Travel W-axis: 1,000 mm Travel C-axis: 360° Travel B-axis: -30° to 195° Main spindle: 3,800 rpm Counter spindle: 5,000 rpm Milling spindle: 6,000 rpm Rapid traverse X-axis: 40,000 mm/min Rapid traverse Z-axis: 40,000 mm/min Rapid traverse Y-axis: 26,000 mm/min Rapid traverse W-axis: 20,000 mm/min Rapid traverse C-axis: 200 rpm Rapid traverse B-axis: 30 rpm Max. tool diameter: 90 mm Max. tool diameter without adjacent tools: 130 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Number of axes: 6 Control: Okuma OSP P200L Dimensions & Weight Footprint: 4,340 × 2,050 mm Height: 2,600 mm Weight: 10,300 kg Spindle hours: 10,500 h EQUIPMENT Kdodpfx Acey S Swxjnol Documentation/manual Continuously variable spindle speed Marpos tool sensor Chip conveyor & coolant system with fine band filter ATC 60 system HSKA-63 (60 tools)

Koşul: yeni gibi (sergi parçası), Üretim yılı: 2021, çalışma saatleri: 10 h, Fonksiyonellik: tamamen fonksiyonel, Swing diameter over bed: 550 mm Maximum machining length: 428 mm Maximum machining diameter: 300 mm Spindle bore: 62 mm Bar machining capacity: 51 mm Spindle nose: A2-6 Main spindle speed range: 35 - 5,000 rpm X-axis travel: 210 mm Z-axis travel: 561 mm Tool changer for driven tools: 12 stations Tool changer locking system: Hydraulic Tool changer drive: Servo Tool change time: 0.2 seconds Toolholder cross-section: 25 mm Maximum speed of driven tools: 5,000 rpm Maximum power of driven tools: 5 kW Maximum end mill machining capability: 16 mm Maximum face mill machining capability: 50 mm Maximum drilling capacity: 16 mm Maximum thread cutting capacity: M16x2 Rapid traverse Z-axis: 30 m/min Rapid traverse X-axis: 30 m/min Positioning accuracy: 0.008 mm Repeatability: 0.003 mm Tailstock: programmable Quill taper: Morse Taper 4 Tailstock travel incl. quill stroke: 565 mm Hydraulic unit tank capacity: 20 L Hydraulic unit pump power: 1.5 kW Hydraulic unit rated pressure: 3.5 - 6 MPa Central lubrication tank capacity: 2 L Central lubrication power: 25 W Coolant tank capacity: 130 L Coolant pump power: 25 W Continuous motor power: 11 kW, 400 Volt, 50 Hz Intermittent motor power (30 min): 15 kW, 400 Volt, 50 Hz Weight: 4,000.00 kg Dimensions: 2,600 x 1,685 x 1,768 mm Machine scope of delivery: Coolant system, extraction unit with filter, tool changer for 12 driven tools, 200 mm hydraulic chuck, Siemens 828D control, 17" touchscreen, programmable tailstock, Renishaw measuring arm, chip conveyor, German operating manuals, CE declaration of conformity. Kdedpfx Acoy S R Tlonjl